For those anxious to get 4.4.4 you might try liquidsmooth which now incorporates it and runs on most if not all moto-x's. It's been upgraded to 4.4.4. Unfortunately, bluetooth is still not working correctly for me and if I try to pair the phone with my car, the car's system goes into a slow endless loop where the phone is connected and then disconnected. I am going to try to see if there is some way to get the phone working with my car....it's very frustrating because the moto-x has never connected correctly (galaxy nexus was flawless in this regard).
I am guessing that it isn't built on the 444 kernel, so, don't get too discouraged yet
Sent from my Nexus 7 using Tapatalk
ghstudio said:
For those anxious to get 4.4.4 you might try liquidsmooth which now incorporates it and runs on most if not all moto-x's. It's been upgraded to 4.4.4. Unfortunately, bluetooth is still not working correctly for me and if I try to pair the phone with my car, the car's system goes into a slow endless loop where the phone is connected and then disconnected. I am going to try to see if there is some way to get the phone working with my car....it's very frustrating because the moto-x has never connected correctly (galaxy nexus was flawless in this regard).
Click to expand...
Click to collapse
What year make and model do you have? I have a 2011 Ford Edge and 2011 Ford Fusion, both of which use Ford Sync (Suck), and I have no issues with either.
Also, are you stock, or running a custom ROM? You seem to be running a custom ROM, and in that case, all bets are off.
jaykresge said:
What year make and model do you have? I have a 2011 Ford Edge and 2011 Ford Fusion, both of which use Ford Sync (Suck), and I have no issues with either.
Also, are you stock, or running a custom ROM? You seem to be running a custom ROM, and in that case, all bets are off.
Click to expand...
Click to collapse
It is 4.4.4 kernel. I think I've found the issue and it's unique to "techies". I have a pebble smart watch which uses google...the connection to the car system (2014 MB) uses bluetooth. If I don't wear my watch, the connection to the car works...no loops/etc. When I wear the watch in the car, the car/phone link goes all screwy. I suspect that one of the bluetooth stacks doesn't like to share....and I'd bet it's the moto-x stack which can either use the bluetooth or the car link, but not manage both together, even though everything is paired correctly. I haven't checked to see if pebble and the MB use the same protocols...it may be that they both share txt even though I only need phone on the car link.
I'll post more when I get further into this....I just stumbled on the cause today when I didn't wear the watch and repaired the phone with the 4.4.4 kernel.
Next time, get a Cadillac.
FORD -Fix Or Repair Daily
abuttino said:
Next time, get a Cadillac.
FORD -Fix Or Repair Daily
Click to expand...
Click to collapse
I've heard them all, but we've had precisely zero issues with the Fusion, and one with the Edge that was fixed free of charge due to silent recall.
My only issue with Sync is that my Fusion has the Gen 1 version, and the most recent software update removed the key reason I chose this car over the then comparable Sonata. Without that feature, I would have gone with the Sonata.
Related
Hi all. I thought I would look for answer here in addition to the BMW forum.
I can pair and make calls with 2011 BMW.
However, when I accept permission to access phonebook, it attempts to download contacts unsuccessfully, then disconnects after 90 seconds and then reconnects, reattempts the download and the cycle repeats itself. If I deny access to the contacts, the connection remains solid. Unfortunately, I get an annoying connection prompt everytime I restart the car.
The first several times I did this, I permanently allowed access and then realized i had to unpair and start the process over without allowing phonebook access. The Bimmer was behaving so erratically that on a couple occasions when recycling the connection, it actually wiped all previously paired phones from the menu.
The connection is rock solid on Acura with both phonebook and message access.
Using mine on a 2014 BMW without issues here. Perhaps set visibility to always on. This help me with issues on an s4 and my car in the past.
Sent from my LG-D800 using Tapatalk
bri315317 said:
Using mine on a 2014 BMW without issues here. Perhaps set visibility to always on. This help me with issues on an s4 and my car in the past.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Sounded reasoanable but didn' work. I even updated to BMW's latest software. Well, at least I have a reasoanble chance of full Bluetooth if I segue into a 2014 at the end of my lease.
docslate said:
Sounded reasoanable but didn' work. I even updated to BMW's latest software. Well, at least I have a reasoanble chance of full Bluetooth if I segue into a 2014 at the end of my lease.
Click to expand...
Click to collapse
I didn't have any issues with the F30 rental I had for two weeks. Which infotainment system is in your BMW? Do you have the enhanced Bluetooth with BMW apps? The vehicle I was in had the standard iDrive without BMW apps or enhanced Bluetooth. I did notice it made separate entries in the phonebook for each contact's various numbers(cell, home, work, etc.), which was a bit annoying.
I've noticed in my Miata the Bluetooth connection will remain open, the word "phone" remains on the radio's screen and I can't change to the radio or any other input until I've powered the phone off and on.
With UConnect in the 2014 Grand Cherokee the vehicle would lose pairing with my phone every time I shut the vehicle. A UConnect software upgrade took car of this.
RJS5689 said:
I didn't have any issues with the F30 rental I had for two weeks. Which infotainment system is in your BMW? Do you have the enhanced Bluetooth with BMW apps? The vehicle I was in had the standard iDrive without BMW apps or enhanced Bluetooth. I did notice it made separate entries in the phonebook for each contact's various numbers(cell, home, work, etc.), which was a bit annoying.
I've noticed in my Miata the Bluetooth connection will remain open, the word "phone" remains on the radio's screen and I can't change to the radio or any other input until I've powered the phone off and on.
With UConnect in the 2014 Grand Cherokee the vehicle would lose pairing with my phone every time I shut the vehicle. A UConnect software upgrade took car of this.
Click to expand...
Click to collapse
I have the iDrive and updated to the latest Bluetooth software. Behavior is really strange. It asks me first if I want to download messages. If I check no, it usually asks a second time. If I check yes, it uploads messages to iDrive but still doesn't misbehave. If I check yes and also check the ALWAYS box, it usually starts to update the phonebook and that's when the predictable cycle starts of 90 seconds attempting to download the phonebook unsuccessfully, then disconnect and reconnect. And of course, it begins again when I restart the car. The only solution at that time is to unpair, pair again and deny phonebook access.
This is exactly the problem I have with my 2011 BMW 335d with idrive. It could be because the 4.0 Bluetooth on my LG G2 is doesn't want to play nice with the car's older software version. I have tried everything you mentioned and have not had any luck either. I have just learned to press the NO button 6 times every time I start the car, and manually enter names & numbers into the car's phone book that I use frequently.
Sent from my VS980 4G using XDA Premium 4 mobile app
electriclarryland said:
This is exactly the problem I have with my 2011 BMW 335d with idrive. It could be because the 4.0 Bluetooth on my LG G2 is doesn't want to play nice with the car's older software version. I have tried everything you mentioned and have not had any luck either. I have just learned to press the NO button 6 times every time I start the car, and manually enter names & numbers into the car's phone book that I use frequently.
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Same issue here. I however am having the issue on a 2014 Ram with the Uconnect 8.4a infotainment system. It only seems to be an issue with AOSP roms, I've installed several and they all have this issue. I didn't have it with the stock based roms.
fegar said:
Same issue here. I however am having the issue on a 2014 Ram with the Uconnect 8.4a infotainment system. It only seems to be an issue with AOSP roms, I've installed several and they all have this issue. I didn't have it with the stock based roms.
Click to expand...
Click to collapse
When I originally had the problems connecting I was on a stock-based ROM. I was going to try an AOSP ROM when Kat Kat came out, but unfortunately I bricked my LG G2 trying to update. I ended up getting an HTC One (M8) that is still unrooted but the phone pairs and my contacts sync. Although it refuses to recognize the phone for BT music streaming, I'm happy with it's performance so far.
Hi all! My boss has the Edge + (as do I) and is having all sorts of issues with the bluetooth connectivity in his BMW. It keeps dropping in and out. The calls don't drop; the bluetooth drops and then reconnects. He's a business owner and makes tons of calls from his car, so as you can imagine, this is quite frustrating (and embarrassing).
Anyone else having similar issues?????
Appreciate your help.
I'm actually having similar issues now in my Ford Fusion. It will connect, but won't let me make calls or listen to music. When I attempt to play music it will say that BT media has been disconnected. Upon checking the status on my phone the media turns off, but the phone is still connected. However, neither really works. It's frustrating as it worked for several days when I first got the phone but then suddenly stopped.
Audi mmi works great. Maybe call your dealership and see if they have a update for the system?
Sent from my SM-G928T using Tapatalk
My advice for the BMW is to check the firmware update for the specific model of car of your boss on the BMW website
It is not very much intuitive but I can assure there is this possibility and also the new firmware download is possible
I've been using a Note 3 for two years on my BMW 530 and at the beginning with their old firmware I had similar issues, then it was very stable with both music and phone calls. Now I'm using the Edge + without any trouble
No problem with Bluetooth on my Toyota Auris Touring Sport HSD, sometimes sms are not showned but they are well received by the car when I check them, and calls work fine. So as dengi_it told you maybe a firmware issue with your car.
I heard somewhere BMW and Mercedes will have some discussion to link iPhone and cars together maybe they won't support Android phone anymore in the future :s.
Thanks, all. Going to pass along this advice. Appreciate it!
Tell him to buy a new car!
worshipfulone said:
Hi all! My boss has the Edge + (as do I) and is having all sorts of issues with the bluetooth connectivity in his BMW. It keeps dropping in and out. The calls don't drop; the bluetooth drops and then reconnects. He's a business owner and makes tons of calls from his car, so as you can imagine, this is quite frustrating (and embarrassing).
Anyone else having similar issues?????
Appreciate your help.
Click to expand...
Click to collapse
Yes, I have the same issue in my 2015 M5. Bluetooth is essentially unusable after the latest update (OH5). This phone is going back.
UPDATE: He factory reset his phone and it seems to have fixed the issue. ::fingers crossed::
ihyln said:
Yes, I have the same issue in my 2015 M5. Bluetooth is essentially unusable after the latest update (OH5). This phone is going back.
Click to expand...
Click to collapse
Bummer. Are you swampping out for another S6 Edge + or a whole new phone all together?
worshipfulone said:
Bummer. Are you swampping out for another S6 Edge + or a whole new phone all together?
Click to expand...
Click to collapse
This is my second S6 Edge+. I thought it was possibly a hardware defect with the first but after the second one I am led to believe it's a typical shoddy samsung update. A factory reset will fix the problem for a few days and it will begin again.
Picking up the new iphone 6s+ on Friday. I've had enough of the bluetooth issues.
ihyln said:
Yes, I have the same issue in my 2015 M5. Bluetooth is essentially unusable after the latest update (OH5). This phone is going back.
Click to expand...
Click to collapse
ihyln said:
This is my second S6 Edge+. I thought it was possibly a hardware defect with the first but after the second one I am led to believe it's a typical shoddy samsung update. A factory reset will fix the problem for a few days and it will begin again.
Picking up the new iphone 6s+ on Friday. I've had enough of the bluetooth issues.
Click to expand...
Click to collapse
Sorry to hear. Good luck!
Works fine in 2011 Hyundai Sonata.
I am having a lot of Bluetooth issues on my Elantra. Works for few days and then it just fails to connect and I have to delete my car from my phone and from my car stereo just to get it to connect. It is a freaking pain in the butt. This is my second Galaxy S6 I have gotten and it seems mostly to be a software issue then a hardware one.
I recently purchased the N6P to replace my dying N4. The transition from one device to the other has gone pretty well, except for one issue. My N6P is unable to find the bluetooth signal from my Ford Fusion. Upon turning on bluetooth and searching for devices, the N6P cannot find the Ford Sync signal. I've rebooted the phone many times, Ive tried it many times in safe mode with no success, Ive turned the Sync's bluetooth on and off numerous times, the phone is still unable to detect it. I have also tried deleting all the paired devices on the Sync settings and had no luck with the N6P working. Aside from a factory reset of the phone, what else can I do?
My N4 was able to connect to the Sync right up to when I stopped using it. My fiancee's Samsung Galaxy (something) can detect, connect, and function with the Sync's bluetooth. I am beginning to think its something with the N6P. Ive tried it on all three versions of the OS Ive had on the phone. The original OS version didn't work when I first powered up the N6P, the next version of the OS i updated to didn't work, and this morning the phone ran the latest update and the bluetooth doesnt work.
I'm at a loss, I'm ready to return this phone and go back to my dying N4.
Edit: I am currently running Android 6.0.1.
My wife's N5x has the same problem with our ford sync, I think its related to the bluetooth disconnection bug I've had since the may update.
You can still connect it by opening the bluetooth screen on your phone so that it is visible to other devices and in the sync setup tell sync to search for devices and select your nexus phone.
My wife and I both own Nexus 6p's. I just bought a brand new Ford F-150 and my wife has a 2014 Toyota mini van (forget the model name off the top of my head, but still a fairly new vehicle). Neither one of our Nexus 6p's will connect to with vehicle. Prior to our Nexus 6p's (which I really had to talk my wife in to getting a Nexus 6p) our LG G4 and Note 5 connected flawlessly. I even bought a Bluetooth thing that plugs in to my trucks aux and that works after turning the Bluetooth on and off a few times. Totally freaking unacceptable. We both have Nexus Protect on both devices, but don't think a new Nexus 6p will fix the issue. No problem at all with Google maps other than audio coming through my brand new trucks speakers. Smh. Both of our phones are not rooted or changed in anyway. Out of the box stock.
Sent from my Nexus 6P using Tapatalk
Sent from my Nexus 6P using Tapatalk
Confirm working in Nissan Frontier. Wonder why its certain auto manufacturers?
Works in 2014 Toyota Camry.
Mine works with zero problems in my '13 Fusion Ti. I also have a bluetooth adapter for torque plugged in with no hiccups. Is your sync software up to date?
Mine detects fine , but once connected I loose all system sound. i.e I can't hear map prompts anymore. Anyone knows a fix for this ?
desilva79 said:
Mine detects fine , but once connected I loose all system sound. i.e I can't hear map prompts anymore. Anyone knows a fix for this ?
Click to expand...
Click to collapse
I can verify that I have this experience as well in one of my cars with an aftermarket bluetooth Sony head unit (that supports A2DP streaming). Haven't checked in the Nissan yet (no A2DP), but I will tonight.
Bluetooth on this model sure has some "quirks".....
I have a 2015 fusion Ti & N6P I have had zero issues. however i will say my bluetooth connection is much more stable after updating SYNC to the latest version. Bit of a pain because you have to create a ford account to gain access to the instructions/files. but here is the URL to get you started: https://owner.ford.com/tools/account/how-tos/keep-your-sync-up-to-date.html
I also have a Ford Fusion 2015 and I have no problems connecting to SYNC. It also connects just fine with my wife's Ford Escape. Which month's build are you using? Is your radio up to date? I don't think I've ever updated the SYNC software in either vehicle so I'm not sure it's that. Make sure BT is on and you have the BT page in settings open so that both devices can see each other. Then go into the car's phone menu and add a device. That's how I did it. Make sure the vehicle is not moving or preferably in park. Good luck.
It magically connected right after I posted above. Now I'm afraid to install the June security patch lol. Working flawlessly in my F-150 though.
Sent from my Nexus 6P using Tapatalk
Anyone else on the newest 7.0 preview and unable to pair their bluetooth with their car?
Driving me nuts...hoping someone found a fix...
bongostl said:
Anyone else on the newest 7.0 preview and unable to pair their bluetooth with their car?
Driving me nuts...hoping someone found a fix...
Click to expand...
Click to collapse
Right after the DP5 installation, I had to unpair the phone and car (2016 Mazda) because the phone would never connect. It was no where near as easy as that sounds, took me the better part of 30 minutes because of repeated "unknown errors" coming from the car.
The phone paired up just fine but I still have frequent and completely unexplained dropouts on literally every Bluetooth device I have (headphones, Moto 360, car and the list goes on). So far this has been the absolute worst of the previews for BT that I have ever seen.
But then, if you read around here, it sounds like there were a lot of these that had flaky BT hardware. Have not exchanged mine, but that has certainly been my experience since I bought this back in December.
I have no issues with Bluetooth and the latest DP. I have my phone connected to a Kenwood deck.
Sent from my Nexus 6P using Tapatalk
I wonder if I have flaky BT hardware? Mine was a launch phone and it has worked perfectly in my Toyota since day 1. However I've recently bought a fitbit type band and with that application (veryfit 2.0) installed and connected to the band then if I make a call in car it drops the BT after about 30 seconds with an error message on screen saying 'corrupted probe message'. I can manually reconnect the call (it's still active on the phone) but after another 30 seconds or so it repeats the cycle. Have upgraded to Nougat Dev Preview NPD90G but still the same. Removing the app and its binding (it binds in the app not the phones BT devices in settings) and rebooting the phone resolves the issue. Tried again with a proper fitbit and the issue is identical.
I will RMA it to see if I get another one that works. Now to figure out how to put it back to stock marshmallow. gulp.
I have the same issue pairing to my car's Bluetooth keep pairing failed
bongostl said:
Anyone else on the newest 7.0 preview and unable to pair their bluetooth with their car?
Driving me nuts...hoping someone found a fix...
Click to expand...
Click to collapse
I had this same issue, I flashed the system file again and wiped the cache and dalvik. It seems to be ok now.
Check this solution. Pair with '0000' worked for me.
http://forum.xda-developers.com/nexus-5x/help/issue-android-nougat-bluetooth-issue-t3446073
Since switching from my Nexus 5 with 6.0.1 to a Nexus 6P with 7.0 I am also suffering from bluetooth issues. Pairing itself is not a problem but the connection sometimes drops, controls in my car don't work properly, remaining track time is not shown, etc. Haven't even tried to make calls yet. If I can't find a solution I'll probably be going back to 6.0.1.
The proposed '0000' solution is not working for me as I cannot change the PIN on my Seat Leon (2016). The PIN is autogenerated and shown on both displays to be confirmed upon pairing.
Has anybody tried flashing the latest 6.0.1 radio image and use it with a 7.0 system?
I have an Atoto S8, and this is my first Android powered head unit (coming from their linux-based F7, which was more of an appliance UI instead of a smart OS). I love the extra functionality it gives me, running apps and video players directly on the unit. But Bluetooth support is wonky.
My wife and I share the car, and ever since swapping to the Android powered unit, it only reconnects to whoever drove last. So if I drive the car all the time, its fine. But when my wife drives, she says bluetooth isn't working, so I have to go into settings on the BT app (BT1 as they call it) and see the three phones listed as paired (my old phone, my new phone and my wife's phone), and click on hers. Wait a bit, and then she is good to go. But then next time I drive, I realize my phone isn't connecting now, so I have to go do it again. Which means she's going to complain next time that her phone isn't working again.
I've installed a few bluetooth powered head units before, and even the Android Auto supporting F7 before this one, worked as expected: If the last device isn't available, try to connect to another recent paired one. It seems to just get stuck on the last one for some reason. Is this a limitation of how bluetooth works on these units?
have you solved this issue
i am finding it very frustrating
i thought i would solve it using the app "automate"
this would star a sequence of checks and sytematic attempted connections
but, oddly enough you cant automate the triggering o fthe flow
so it would only start if actioned
Yes, or rather THEY solved it.
Reach out to customer support. There is an update to the Bluetooth module that makes this work the way I described.
I got an A6pf in my other car and had them make an update for that one too. Much happier now.