[Q] can't click on "install" when I try to install APK - G2 Q&A, Help & Troubleshooting

I am using the international version of the g2 and its rooted , I've tried installing few apk files it doesn't work , i ts not the "unknown sources" option and I don't have screen filter , it just doesn't work suddenly , last apps Install were : echo notification , maxthon browser and push bullet before that i didn't have a problem ...

it's probably one of the apps you have stopping you pressing the install button
had it happen to me a while a go on a nexus 4, a screen colour filter adjustment app was the culprit. I know you say you don't have one so I guess another app is impeding it

Related

[Q] Cannot instak APKs files

Hey everyone,
I'm facing a problem which is kind of strange, today I tried installing an apk to my nexus 7 3g , the thing is I cannot press on the install button. I enabled install from unknown source already.
The strange thing is I can press on cancel but I cannot press on the install button ... shall i flash the stock again?
I'm on 4.2.1
Thanks
What is the app? Have you tried installing from Play or is this something you downloaded and are trying to side load? Incompatible apps won't install by design.
If the Install button doesn't respond, it means something is preventing the installation. The app may be incompatible or a file may be missing.
Go to setting security .. uncheck verify apps.... .Typing this from memory but i think that is where its at.... This is likely your issue.. Let us know..
Erica Renee
Did you look at all of the permissions it is requesting? It won't let you press install unless you've read all of the permissions.
Sent from my Nexus 7 w/ PA and m-kernel
I already disabled the verify settings , still I can't install the apks.
It opens the apk but I can't press the install button
Sent from my Nexus 7 using xda app-developers app
Also can't install apk on Nexus 7
dr.nemro said:
I already disabled the verify settings , still I can't install the apks.
It opens the apk but I can't press the install button
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I've been able to install my own apk files until two days ago. Now with the exact same apk that worked before, the Install button won't do anything at all. The Cancel button works fine. I've tried all the steps described in other posts for other devices but nothing works. I haven't changes anything on the tablet but the auto updated do occur.
Has anyone solved this problem yet?
Thanks.
I feel like you have to scroll to the bottom of the permissions list.
Sent from my Nexus 7 using Tapatalk HD

Cannot install non market app

I have some weird problem
I cannot press button install when trying to installing *any* apk file
video here:
http://db.tt/9bCd6rYL
In settings->security->install apk from unknow sources is checked
help me?
Are you running paranoid. If so you need to disable halo in order to install an app that way
Sent from my Nexus 4 using xda app-developers app
No
I have rooted phone, stock rom 4.2.2., stock recovery, stock kernel
this was happening to me before but after scrolling down-up through permissions i was able to tap INSTALL button
anyone?
Some apps will cause this, I had it when I had Screen Adjuster running, stopped it and I was able to install.
Specifically, any apps that you've given permission to draw over other apps can potentially cause what you're experiencing. E.g., screen filter and other floating apps.
kien and ohyeahar tnx for help, i solved it by uninstalling twilight
https://play.google.com/store/apps/details?id=com.urbandroid.lux&hl=en
avoid this and you will have no problem

[Q] "Sorry ! Plug & Pop unfortunately stopped

Just a quick question .... Anyone gotten a "SORRY! unfortunately Plug & Pop has stopped" error ??
I am only rooted (just over 24 hours new device) and have uninstalled (not deleted) some bloatware w/ TiBU .... It's the 'ethernet' setting .... MTP setting works .... just weird it started happening ... WTF ?!
NO, haven't installed XPOSED, etc ....
Happened to me when I installed a nav bar hiding app. I think it may have also happened when I started using nova launcher as well, but I can't remember.
Just ran across this as well http://forum.xda-developers.com/showthread.php?t=2549002. I know you said you haven't installed xposed, but it may be worth a look since it's for people with the same issue you're experiencing.
Did you hide navigation bar? This error goes from LG tool, which display animation and action choices after you plug USB cable or accessories.
If you don't want to install Xposed framework and my mod from above post, then you better use Titanium Backup and freeze this app.
Sent from my LG-D802 using Tapatalk
C.Hatfield said:
Just a quick question .... Anyone gotten a "SORRY! unfortunately Plug & Pop has stopped" error ??
I am only rooted (just over 24 hours new device) and have uninstalled (not deleted) some bloatware w/ TiBU .... It's the 'ethernet' setting .... MTP setting works .... just weird it started happening ... WTF ?!
NO, haven't installed XPOSED, etc ....
Click to expand...
Click to collapse
I only get that if plug in an earphone jack and tap edit from the menu that comes. The short cuts work fine though.
I did install a kitkat launcher (without rooting).
I have since removed that launcher, but i still get the plug and pop message when I tap the edit button.
Any ideas?

Smart Select Edge from S8?

hi guys i wonder if anyone has or know a way to install the smart select edge panel from S8 to the S7 edge?
I've read somewhere on xda that you'll also need to download the new AOD along with smart select apk, but personally I didn't have that issue nor do I understand why one would need the other to work...
But I downloaded the apk from apkmirrior, installed, then swiped open the edge panel tab, click the tiny settings gear once panel is open so you can enable/disable /download other edge tabs, and enabled smart select for one of your edge tabs. Viola
Sorry i tried to upload screenshots but xda network error...
sl33pyK said:
I've read somewhere on xda that you'll also need to download the new AOD along with smart select apk, but personally I didn't have that issue nor do I understand why one would need the other to work...
But I downloaded the apk from apkmirrior, installed, then swiped open the edge panel tab, click the tiny settings gear once panel is open so you can enable/disable /download other edge tabs, and enabled smart select for one of your edge tabs. Viola
Sorry i tried to upload screenshots but xda network error...
Click to expand...
Click to collapse
i downloaded 2 files version 1.0.39 and version 1.0.42 and each file when i try to install it i get
app not installed
The package conflicts with with an existing package by the same name.
please advice
ibrahimisadek said:
i downloaded 2 files version 1.0.39 and version 1.0.42 and each file when i try to install it i get
app not installed
The package conflicts with with an existing package by the same name.
please advice
Click to expand...
Click to collapse
I'm actually starting to run into the same issue with package conflict on certain apps trying to install from unknown sources.. I know that the options others have tried don't work.. As far as smart select goes, have you tried downloading the apk from XDA? Some are having success that way..
https://forum.xda-developers.com/s7...galaxy-s7-edge-sm-g935f-t3584881/post71741190
Also there are many people having success with installing apks that run into package conflict, and it has to do with putting a shortcut of the apk on homescreen, turning off all security sign in features for lock screen so you can access your apk shortcut as fast as possible.. Then reboot your phone and as soon as you can, try to install the shortcut.. Also make sure to enable installation from unknown sources before reboot.
I haven't been able to get that to work for my conflicts, but lots of people have..
EDIT: I recently did an update from Verizon for the April security patch and whatever the bloatware they added and that's when I started running into conflicting packages
sl33pyK said:
I'm actually starting to run into the same issue with package conflict on certain apps trying to install from unknown sources.. I know that the options others have tried don't work.. As far as smart select goes, have you tried downloading the apk from XDA? Some are having success that way..
https://forum.xda-developers.com/s7...galaxy-s7-edge-sm-g935f-t3584881/post71741190
Also there are many people having success with installing apks that run into package conflict, and it has to do with putting a shortcut of the apk on homescreen, turning off all security sign in features for lock screen so you can access your apk shortcut as fast as possible.. Then reboot your phone and as soon as you can, try to install the shortcut.. Also make sure to enable installation from unknown sources before reboot.
I haven't been able to get that to work for my conflicts, but lots of people have..
EDIT: I recently did an update from Verizon for the April security patch and whatever the bloatware they added and that's when I started running into conflicting packages
Click to expand...
Click to collapse
well i tried to download and install the SmartClipEdgeService.apk and got the same error as the one from apkmirror
any advice ?
ibrahimisadek said:
well i tried to download and install the SmartClipEdgeService.apk and got the same error as the one from apkmirror
any advice ?
Click to expand...
Click to collapse
Without doing a factory reset, I honestly have no clue. There are so many mixed reports that say worked for their package conflicts, but the only way that continually is working is doing a backup and factory reset, then download and install the previous package conflicticted apks before going back through and backing up old apps/data.
I know it's a pain to do all that, and that's why I haven't gone through with doing a factory reset yet but I'm getting to that point if someone doesn't find out a solution soon..
I just tried to get smart select working .
So I installed the smart select apk, it installed successfully without any errors and it did show up as one of the default panel just like it should.
But when trying to use any of the smart select features on the panel my phone freezes for about 20 seconds.
The only option in smart select that works for me is "pin to top".
I am using a S7 edge rom, not a ported s8 rom.
Any suggestions?
Misterjunky said:
I just tried to get smart select working .
So I installed the smart select apk, it installed successfully without any errors and it did show up as one of the default panel just like it should.
But when trying to use any of the smart select features on the panel my phone freezes for about 20 seconds.
The only option in smart select that works for me is "pin to top".
I am using a S7 edge rom, not a ported s8 rom.
Any suggestions?
Click to expand...
Click to collapse
Have you downloaded the latest optical Reader app from Samsung? I just came across this article that states you need the optical reader to make it work properly?
https://www.sammobile.com/2017/05/0...s-and-gifs-using-the-smart-select-edge-panel/
I tried all methods. None of them works
I'm our of options myself, I'm also in a position where I'm getting package conflicts but thankfully have been able to get some before I did my last update from Verizon, which is when I started getting package conflicts.. I wish you luck though and hopefully we can come up with something
Just wanted to quickly say that the apk from this link (found above):
https://forum.xda-developers.com/s7...e-sm-g935f-t3584881/post71741190#post71741190
works.
Using a non-rooted tmo S7E
Rectangle and Circle screenshot can be fixed by installing S8's AOD
I get conflicts with that apk too. But i appreciate your sharing.
Sent from my SM-G935V using Tapatalk
I received the same conflict. But I tried the following: create a new folder in root system/app , rename the new folder 'SmartClipEdgeService'. Then download the apk from http://www.apkmirror.com/apk/samsung-electronics-co-ltd/smart-select-2/smart-select-2-1-0-42-release/smart-select-1-0-42-android-apk-download/ , rename it 'SmartClipEdgeService.apk' and put it in the folder. Restart the device and you should be able to select it in the edge panel.
Unfortunately, I can't use the rectangle or oval either, the app just crashes when I try. If anyone knows how to fix this, it would be much appreciated!
I'm on G935F btw.
---------- Post added at 05:59 PM ---------- Previous post was at 05:26 PM ----------
Update: Could get the rectangle and oval to work by downloading S8's AOD apk and replacing it in the root system/priv-app/AODService_v20 folder (also renaming the apk as 'AODService_v20.apk') BUT I lose AOD and I keep getting an error message saying AOD keeps stopping when I restart the phone as well as when I try to use the smart select features. The smart select hangs for abit but will work eventually.
Working on my end without freezing.
https://forum.xda-developers.com/s7-edge/themes/root-s8-apk-collection-bypass-package-t3617590
I have figured out a way to get the Smart Select Edge fully functional on the S7 Edge after some trial and error. You will need root. (I don't know if all the steps are necessary but that's just what I did.)
1. Create a new folder in root system/app , rename the new folder 'SmartClipEdgeService'. Then download the apk here , rename it 'SmartClipEdgeService.apk' and put it in the folder.
2. Download S8's AOD apk here and replace it in the root system/priv-app/AODService_v20 folder (also renaming the apk 'AODService_v20.apk'). Backup the original apk just in case,
3. Set the AOD apk permission to 0755 (rwx-rx-rx), folder permission should be the same.
4. Clear AOD cache and data (if you can't find it in applications, use titanium backup to 'open system details' and clear data, also use it to 'clear cache'.
5. Restart and it should work! You will have both AOD and the smart select edge fully working, just go to settings on the edge panel and select 'smart select' as one of your panels.
When the new AOD is installed it will have a 'learn how to use aod' notification on the AOD screen that you might not be able to get rid off. Just tap next very close to the bottom of you screen if it doesn't register.
Misterjunky said:
I just tried to get smart select working .
So I installed the smart select apk, it installed successfully without any errors and it did show up as one of the default panel just like it should.
But when trying to use any of the smart select features on the panel my phone freezes for about 20 seconds.
The only option in smart select that works for me is "pin to top".
I am using a S7 edge rom, not a ported s8 rom.
Any suggestions?
Click to expand...
Click to collapse
mee too
For me it works. I had crash problem but after clearing data it works now except I cannot draw to screenshots that I took via edge smart select tool. Rest works fine. Any ideas how to fix draw issue ?

[HOW_TO] [NO_ROOT] [NO_ADB] [WORKAROUND] Echo Show 15 sideload APK works with latest Firmware

Hi
it is a long time ago.
Lastweek I got the fireTV update on the Amazon echo show 15. Without this change/update no chance for me to sideload apks. Funny is before the update the firmware is V7.5.5.5 and after firetv installation it is V7.5.0.1. Don't ask me why. Maybe they drunk to much.
But it took me 20 min to find a workaround to sidekoade apks.
@Amazon_Devs: Stop reading here. DO NOT BLOCK this workaround, make the launcher selectable again and bring the same Dev functions like on fireTV! THANK YOU!
I am not responsible for any damage or warranty loss
So end of the political messages.
For the first apk i would install Firefox apk(with it you can download more apps more comfortable)
1. Open FireTV Icon
2. Open appstore
3. Get Downloader, Totalus (launcher) and Total comander from Amazon fireTV appstore
(All the Apps do not work with touch.)
4. Open App Downloader
5. Select with onscreenremote "Browser"
6. Look for a page where you can get Firefox apk. I used uptodown
7. Download the apk (i recomend Firefox)
9. Go to total comander
10.Move with total comander the downloaded file from path Downloader to Downloads
11. Open totalus launcher
12. Open the blue folder (system file explorer)
13.Klick on Downloads
14. There should be your downloaded apk.
15. Install it
Ok done
When you install Firefox nextime you will have a browser which support touch functionality and when you download the next APK it will be directly stored in the Folder Downloads
Then just repeat the last steps 11-15.
Limitations:
Getting permissions is like Russian roulette storage is no problem. Special rights or higher permission can't confirmed in the system settings.
Dev options are available but it is the same **** as before.
Ok so now to the use cases:
I use this (now) awsome 15.6 zoll screen in my citchen to controll everything via homeassistant.
If you a owner of a Fritzbox Cable you can install Fritz TV apk direktly from AVM and you get a nice TV.
Homeassistant (you can enable in the app settings stay activ)
Spotify
Firefox
Total comander as an apk (not the Amazon appstore version. Remove it and install total comamder apk and you can controll it with the touchscreen)
I tired Nova launcher and Microsoft launcher
F DROID Can't install apks
Playstore (I think they have put playstore on a apk blacklist)
Uptodown can't install apks
There is some days ago another manual the suggested using Makrodroid for automations. May Tasker as well.
Also a APK which creates a storage via wifi. So with it you can transfere files from a PC to the echo show and the other way round.
Open Points:
I installed Wolf Launcher aka launcher Manager for FireTV. This launcher request the standard app for Settings.
When someone here is able to create a app which request the standard settings app and will open a selectable app like a launcher or whatever. The settings button can converted to a custom shortcut.
A custom linageOS ROM would be nice but I think
the kernel source for CPU AZ2 (some informations about processor) is not released and there is no way right now to install twrp. Correct me if I am wrong.
Some more blabla:
Echo Show 15 opened: teardown echo show 15
Her is written the hardware price is 309 Dollar. I bought it during blackweek for 199 and if you have a old echo you can make a trade in and you can get 25% discount on top.
Sideloaded apks listed in firetv as grey/black fields so you don't know which app is the correct one.
This could a workaround: Workaround icons
I also bought the usb network adapter to connect the device by LAN and I am thinking about a POE powersupply it.
There are two more guides out there:
Guide 1
Guide 2
Appdownloader became unavailable yesterday morning - if you try to install it the icon doesnt say GET - it just says unavailable. Any other workarounds for adb?
Hi
May the wifi ftp app could work or the other Downloader App but both are not for free or do it like in Guide2
I used the WiFi Transfer app in the store - then you can use the built in File Manager thats on the Show to install the APK's - Since they removed Downloader, this way is the second way to do it - and a little tougher to disable without a firmware update, assuming they remove the built in File Manager to install apps.
Robotica72 said:
I used the WiFi Transfer app in the store - then you can use the built in File Manager thats on the Show to install the APK's - Since they removed Downloader, this way is the second way to do it - and a little tougher to disable without a firmware update, assuming they remove the built in File Manager to install apps.
Click to expand...
Click to collapse
So, I am really new at this for the Show 15, but I am learning.
The wifi transfer app worked to get my apk on the show 15 and I used Total Commander to move it to the Downloads folder.
When I install it though it doesn't show up, as if it didn't install.
I don't remember what other app I used to try to install it, but at some point I got a message saying that I didn't have permission to install apps from unknown sources.
What am I doing wrong?
You need to use an app that is a trusted installer - the original method worked since Downloader has this, but all the other file managers do not. So, using Total Commander and go to system apps (scroll down a bit on the left side) - Open system apps and then on the right hand side, scroll down to File Manager (it may just say file). Then Click the virtual remote enter button and hold it for a bit, after about 2 seconds the upper right hand corner will show a new icon, it will be the first icon in the 4 icons in the upper right. Using the remote clik the new click and it will open up the File Manager - Install from there
Robotica72 said:
You need to use an app that is a trusted installer - the original method worked since Downloader has this, but all the other file managers do not. So, using Total Commander and go to system apps (scroll down a bit on the left side) - Open system apps and then on the right hand side, scroll down to File Manager (it may just say file). Then Click the virtual remote enter button and hold it for a bit, after about 2 seconds the upper right hand corner will show a new icon, it will be the first icon in the 4 icons in the upper right. Using the remote clik the new click and it will open up the File Manager - Install from there
Click to expand...
Click to collapse
Thanks so much for working with me on this.
When I open Total Commander there is a list on the left.
The last one is - Installed apps
In that folder there is a File Explorer 1.681A and one that I think I downloaded - File Explorer for Fire Tablets & TV (File Manager App) 1.0
Using my Fire TV remote and holding down the ENTER button a menu pops up:
Launch app(main function)
Copy via bluetooth
Delete
Properties
Copy to clipboard
Sent to
Open with...
What am I doping wrong?
No Problem - this is the part you need - Use TV File Manager - That has the systems app option, its the in the play store...
It will have the system files on the left
Robotica72 said:
No Problem - this is the part you need - Use TV File Manager - That has the systems app option, its the in the play store...
It will have the system files on the left
Click to expand...
Click to collapse
With TV File manager I get "For your security your tablet is not allowed to install unknown apps from this source". There is a "settings" that shows up with the message, but when I click that it just goes back to the TV File Manager screen. Ugh
Any other suggestions?
HypnoticGuy said:
With TV File manager I get "For your security your tablet is not allowed to install unknown apps from this source". There is a "settings" that shows up with the message, but when I click that it just goes back to the TV File Manager screen. Ugh
Any other suggestions?
Click to expand...
Click to collapse
Oh wait. Still trying something.
HypnoticGuy said:
Oh wait. Still trying something.
Click to expand...
Click to collapse
So, when I go to "System Apps" in TV File manager, then "Files" it
HypnoticGuy said:
Oh wait. Still trying something.
Click to expand...
Click to collapse
I got it!! Thank you soooo much!
You're my hero! This is great!
Excellent - Glad you got it working... I ordered another one since this works, hoping it gets here quickly before Amazon figures this one out and disables it in some update. I think it would require an entire system update to disable since its a system app.
Hi,
I've try to install something since Downloader is KO but.... how what dit you (@HypnoticGuy ) do to install it ?
tried installing the same way but there is a new message "unable to install apps from unknown source".
Is there any way around this? seems like Amazon blocked it all.
need to know before sending it back as it is useless for me if I cannot side load anything on this...
When do you get the error that you cant install apps from an unknown source? I can still sideload apps using the built in, system file manager, but I havent updated since it worked (assuming Amazon did updates)
Amazon updated and removed the built in file manager so you can no longer install APKs by opening them with it. I’m not sure what to do now and may just return mine until this gets sorted out. Wish I could downgrade the OS, but it seems unlikely
adb sideloading may be one idea, but enabling developer options does not show adb debugging menu anymore.
Hello everyone,
I got an Echo Show 15 as a gift for Christmas and then brought it to the software version at the time. So Firetv was on it but I didn't do anything else and since I still haven't tackled the wall mounting with cabling, it hasn't been switched on since then.
My question would be: Is there a way to block it so that I can install the kiosk browser or will it still force the update on me?
I have Pi Hole but have no idea what to set there!
Of course, I don't dare to put the device into operation now either
does anyone know?

Categories

Resources