Database Users

No Signal after 4.4.2 update

Hey Guys,
Today I updated my i9505 from Cynogen Mod 10.3.1 to the new "[AOSP] Official 4.4.2 - S4 Google Edition - Final-R1.1" by Jamal, but I read that you needed to update to the leaked 4.4.2 before flashing so that the modem and bits are upto date before flashing any 4.4.2 ROMs or else you could end up with no wifi after flashing.
So I followed these instructions to flash the leaked 4.4.2:
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
Which all went well but I couldn't get Wifi after flashing, and (probably not important) but the default language it choose during the setup was Dutch??? Seeing as I couldnt get the wifi to enable I decided to flash Philz Touch Recovery v6 and then put Jamal's "S4 Google Edition - Final-R1.1" by putting it onto the SD card and flashing through Philz recovery.
Flashing went without a problem.... only thing is now I cant get Vodafone (UK) signal 80% of the time, the other 20% I do get signal and can make calls, just seems strange as previously 80% I WOULD get signal!
Did I do something wrong? I had a really bad feeling that flashing the CP, BL and CSC has somehow messed things up......please help!

Same problem, bump.

ColdIce23 said:
Same problem, bump.
Click to expand...
Click to collapse
I just fixed the problem, ColdIce23, check your Baseband Version under Settings > About Device, I bet yours is still set to the original baseband version like mine was...
1) Re-Download the Baseband for the leaked 4.4.2 rom (Here)
2) Open Odin 3.09 and do the following:
Ok it worked.
If anyone else is having issues with the baseband not changing, do this.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
Now I have FULL SIGNAL! .....so far..... will report back once I have left work but this is a good sign as I had no signal what-so-ever 5 minutes ago!

Flasing a 4.4.2 Modem works well with the Kit Kat based roms. Two to choose from NA1 or NA5, depending on what bootloader your on flash the appropriate modem files.
I've got NA5 on the 4.4.2 GE Rom with Three and no signal issues as of yet.

treesmoker said:
I just fixed the problem, ColdIce23, check your Baseband Version under Settings > About Device, I bet yours is still set to the original baseband version like mine was...
1) Re-Download the Baseband for the leaked 4.4.2 rom (Here)
2) Open Odin 3.09 and do the following:
Now I have FULL SIGNAL! .....so far..... will report back once I have left work but this is a good sign as I had no signal what-so-ever 5 minutes ago!
Click to expand...
Click to collapse
My I9505 baseband version is I9505XXUFNA5. Is not it the updated one?

kamrul.auntu said:
My I9505 baseband version is I9505XXUFNA5. Is not it the updated one?
Click to expand...
Click to collapse
Yes you the latest baseband available.

treesmoker said:
Hey Guys,
Today I updated my i9505 from Cynogen Mod 10.3.1 to the new "[AOSP] Official 4.4.2 - S4 Google Edition - Final-R1.1" by Jamal, but I read that you needed to update to the leaked 4.4.2 before flashing so that the modem and bits are upto date before flashing any 4.4.2 ROMs or else you could end up with no wifi after flashing.
/QUOTE]
I think u missunderstood something. For the Kitkat Google Edition u do not have to flash the leak before. Its only for the Samsung Touchwiz Version of Kitkat
tapatalked by an Echoenian
Click to expand...
Click to collapse

nikzDHD said:
Flasing a 4.4.2 Modem works well with the Kit Kat based roms. Two to choose from NA1 or NA5, depending on what bootloader your on flash the appropriate modem files.
I've got NA5 on the 4.4.2 GE Rom with Three and no signal issues as of yet.
Click to expand...
Click to collapse
I flashed the NA5 modem which seems to have failed the first time round, as it didnt actually change the baseband version in settings. Since flashing a second time (when it actual flashed properly) I now have full signal...... but I have another problem now:
When I click the dailer and select a person to call, the screen goes black and I dont see/hear any indication that a call has initiated. I tried with my wife and her phone rings and she can answer the call, but my screen is still black with no sound....
I have tried wiping data / davlik / cache and installing the rom from scratch, but I still get the same issue?
UPDATE:
Right so I just flashed CM11 as a test, and still can't make calls, so obviously not a ROM fault..... does the BL, CP or CSC have anything to do with the making calls procress?

I've got a similar issue.
I've got a M919V running Jamal's 4.3 GPE rom, but after flashing Jamal's 4.4.2 GPE i get no signal. After going into settings and selecting network the signal lasts, but after the screen goes off signal is once again lost.
Is there a procedure to follow that will fix this? This is found when when flashing many 4.4 roms.
-Thanks

Well, I get signal when I'm near a cell tower...
No changes tho. Still same problem.

Hi guys,
I'm wondering if you have resolved your modem problems?
I flashed to Jamal's 4.4.2 version 1.2 and I don't have a signal now.
I flashed the modem to NA5 but styill no signal. Also I can't even check my CSC using *#1234# as "Mobile network not available"
Any suggestions?
Thanks.

Hi Duskin,
For me, I think it's releated to the phone itself as I got a screen replacement. I haven't solved the problem yet because I got to get back to the store where I got my screen replaced.
Sent from my LG-P880 using Tapatalk

[Q] bricked note 3

Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated

i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.

CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?

xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?

solution
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
hi i followed your instructions afte having the same problem.
once it was flashed and at the samsung logo
i took battery out, replaced it and started phone in recovery mode. go to wipe factory reset
then reboot
mine worked and is ok .

CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
darkman13 said:
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
Click to expand...
Click to collapse
Do either of you have a 16 GB version?

Hi All,
My problem :
I wanted to install the official kitkat rom but I made a big mystake : I took N900 files instead of N9005...
After that I successfully installed the right bootloader and CWM.
I installed some cuustom roms but the setupwizard crash at the last step
I tried to flash the complete official 4.4.2 rom but odin failed with message on the phone : "ODIN : invalid ext4 image"
Anybody has any idea to help me ?

hi guys i manage to fix it, well mine anyway worked by flashing the pit i found on xda and selecting repartion on odin 3.7 along with german 4.4.2 to my n9005 from Hong Kong, re booted and done a factory reset via volume button also wiped cache and re started and it came back alive on the selected german rom 4.4.2. hope it hels others. ps my note 3 was from hong kong n9005 32gb

xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
hey, i wasnt trying to downgrade, i was going from cm11 to official 4.4.2. i've got a 32gb model from france i believe (the box has french written all over it so do the manuals)

newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
dude, you are god thank you so much for that, working perfect now

xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
After installing DBT NB4 FW ( or with Polish NB3 FW) my LTE speeds become almost 0.
I tried multiple installs.
Any guidance?

Quick tip: Uninstall KIES.
Kies is like a big brother.
Use ODIN 1.85 and tick update phone bootloader. That's how I fixed mine. The other versions of Odin wouldn't let me update bootloader.
Of course, before you do this Flash/wipe data in recovery mode.
But uninstalling KIES solved my issue.
Sent from my SM-N9005 using Tapatalk

[Q] SGH-I337M No Sound or WIFI???

I have tried everything in this forum in regards to re-flashing, the weird thing is I can flash 4.2 which boots up, but no sound or wifi, also once it boots I am able to use Kies to Upgrade the 4.4, but still no sound or wifi, if I try and flash 4.3 JB through Odin it fails every single time, I have tried multiple versions of Odin and multiple sources for the firmware file???

mza2k9 said:
I have tried everything in this forum in regards to re-flashing, the weird thing is I can flash 4.2 which boots up, but no sound or wifi, also once it boots I am able to use Kies to Upgrade the 4.4, but still no sound or wifi, if I try and flash 4.3 JB through Odin it fails every single time, I have tried multiple versions of Odin and multiple sources for the firmware file???
Click to expand...
Click to collapse
1. Dial *#1234# and attach the screenshot
2. Tell me if your phone is branded to one company phone or u bought it unlocked.

It is Branded to Rogers Wireless Canada.

mza2k9 said:
It is Branded to Rogers Wireless Canada.
Click to expand...
Click to collapse
1. You have to go SamMobile and sig in
2. Look for ur phone and download this firmware:
Model: SGH-I337M
Model name: GALAXY S4
Country: Canada (Rogers)
Version: Android 4.4.2
Changelist: 880525
Build date: Fri, 28 Feb 2014 16:41:46 +0000
Product Code: RWC
PDA: I337MVLUFNC1
CSC: I337MOYAFNC1
MODEM: I337MVLUFNC1
3. Download it and unzip it.
4. Wipe all in ur phone
5. Reboot in DOWNLOAD MODE
6. Use Odin for flash that firmware (like the pic attached)
7. Good luck

I have registered at Sammobile and downloaded the correct firmware for 4.3 and it will not flash gets all the way to the very end and when it verifys it fails??

mza2k9 said:
I have registered at Sammobile and downloaded the correct firmware for 4.3 and it will not flash gets all the way to the very end and when it verifys it fails??
Click to expand...
Click to collapse
You downloaded wrong firmware. You have to download the one I was telling ya before in post #4 :silly:

ok I will try the 4.4 when I get home the one you suggested, howvever I'm pretty sure I tried that with no sound and wifi issue.. i'll keep yopu posted thanks

mza2k9 said:
ok I will try the 4.4 when I get home the one you suggested, howvever I'm pretty sure I tried that with no sound and wifi issue.. i'll keep yopu posted thanks
Click to expand...
Click to collapse
1. Flash that firmware 1 time and check if u dont have sound and wifi. If u havent them, flash again the same firmware 1 time more.
2. If the second time u flash it u still without them, dial *#1234# and attach the screenshot here and we will solve the problem :highfive:

Same issue
Hey, I'm having the exact same problem. I had a custom rom installed and I noticed that I didn't have much room left on my internal storage. It was probably a stupid move, but while my phone was plugged into my computer, I deleted a lot of the folders that I saw on my phone. I kept the folders I thought were important (Android, DCIM) but apparently I deleted some important files.
I have reset the phone multiple times. Still no wifi or no sound. I have the same model this person has (SGH-i337m) and it was locked to Rogers originally, but the person I bought it from had it factory unlocked. I'm assuming I still try flashing with the Rogers firmware? I still have 29 minutes left for the firmware to finish downloading and then I'm going to try flashing it twice like you recommended.
If that doesn't work, I really hope you see this and are able to help me out. If it doesn't work, I will dial #1234# and post what it says. Please reply asap if you see this. Thanks!

I have the same problem as well!
It wasn't until I read this post that I realized I have not sound either.
I'm in the process of running the update through Kies (takes FOREVER) and then I'll try these instructions. Originally locked to Rogers, but was unlocked so I can use SIM cards in other countries.
I flashed to CyanogneMod and then tried to go back and now have this problem, with the kernel warning in red when the phone starts.
I had this version on my phone before CyanogenMod - can I try putting it back on, or do I use the March/2014 release?
Model SGH-I337M
Model name GALAXY S4
Country Canada (Rogers)
Version Android 4.4.2
Changelist 2767305
Build date Mon, 29 Sep 2014 04:07:02 +0000
Product code RWC
PDA I337MVLUFNI2
CSC I337MOYAFNI2
MODEM I337MVLUFNI2
Fingers crossed!

TeknikalMusic said:
Hey, I'm having the exact same problem. I had a custom rom installed and I noticed that I didn't have much room left on my internal storage. It was probably a stupid move, but while my phone was plugged into my computer, I deleted a lot of the folders that I saw on my phone. I kept the folders I thought were important (Android, DCIM) but apparently I deleted some important files.
I have reset the phone multiple times. Still no wifi or no sound. I have the same model this person has (SGH-i337m) and it was locked to Rogers originally, but the person I bought it from had it factory unlocked. I'm assuming I still try flashing with the Rogers firmware? I still have 29 minutes left for the firmware to finish downloading and then I'm going to try flashing it twice like you recommended.
If that doesn't work, I really hope you see this and are able to help me out. If it doesn't work, I will dial #1234# and post what it says. Please reply asap if you see this. Thanks!
Click to expand...
Click to collapse
1. Install this APP and see the CSC (like in the pic attached) for know your country code.
2. Download the correct firmware in Sammobile.com with the correct CSC.

ok, I can breathe again.
I flashed the ROM that I detailed above and everything is working again.... sound, wifi, camera.... let's not talk about everything that was f'd up...
Thing I have learned:
Breathe. and don't show your stress when things go belly-up.
Ignore husband laughing at me and saying that he won't let me have HIS Samsung S4 to mess with now that I f'd mine
Always back up.
even more importantly, DON'T BACK UP WITH KIES. I LOST ALL MY TEXTS.... research a good backup program
keep the latest working version of your ROM on your desktop for the next time you f up for easy reference.......

[Q] I9500 installed 4.4.2, but modem stuck on 4.3, pls help?

Hi All,
I have a strange issue, I have upgraded my phone to kitkat(I9500XXUFNE4) thru odin, but the modem is missing and cause of that IMEI is showing as "null/null", so I tried flashing only modem from the zip file of I9500XXUFNE4 but didn't work, and now only way to get modem back on my phone is when I flash "GT-I9500_Modem_XXUEMJ8", the only problem with this is, if I tried to install Paranoid Android my modem again goes missing and even though I flash "GT-I9500_Modem_XXUEMJ8" thru odin still it doesn't, it's like only if I flash Samsung's official firmware then only flashing "GT-I9500_Modem_XXUEMJ8" will bring back my modem and IMEI#.
I should probably mention this also- previously I had installed leaked firmware of open asia "I9500XXUEMJ5_I9500ODDEMJ5_I9500DDUEMJ5_ODD", since then even though I update my phone via official Samsung's OTA or kies, it just updated my "AP" and "CSC, but I have to flash "GT-I9500_Modem_XXUEMJ8" in order to get back my modem.
Please help me, as I want to use my S4 with AOSP or AOKP based roms only.
P.S. I had three generations of Galaxy S series starting from I9000 and since those days I'm flashing my phone and using Custom roms.
~Androbot

[Q] Unknown Baseband / IMEI - no warranty :(

Greetings,
My phone was working fine until a few days ago, when suddenly it starts to show the icon for no service.
I've already tried to reset to factory defaults, and also reflashed the stock rom, after this I found out that my baseband and imei where null (not sure if this was the main reason for not having service, but at least looks like)
What is the correct way of fixing unknown baseband/imei? reflashing the modem?
My phone was bought in south africa last year, and now I'm living in brazil.
Model: (Note3) SM-N900
South Africa - XFE
PDA: N900XXUDND1
CSC: N900OJVDND1
MODEM: N900XXUDND1
Where to download the correct modem firmware? any other ideas/suggestions that I should try?
Thanks

Same problem
bro i hav a note three from Roman because i check the phone sticker behind the battery the imei and serial says its (ROM) {Romania} and its on kitkat i can run sim but i cant use 3g or 4g on the phone its always on E not switching i tried my sim on other phone 3g works but not on my Note3 so i m searching for the phone imei repair everyone is sayin EFS and i down want a complicated method i want easy and clean way there is a wbsite for the imei checker(http://sndeep.info/en) check ur phone imei the one on the back wht dose it say and also the serial it will tell u where use unit belongs to if sim not running then i suggest to consult with the android experts local shops here u wont get answers..... and they wont help out....

As far as I know, my rom should be: South Africa - XFE
When I checked my serial on the website that you linked, I could see Vietnam.
I'm in the very south of brazil, not many android experts around here

eduardogsilva said:
Greetings,
My phone was working fine until a few days ago, when suddenly it starts to show the icon for no service.
I've already tried to reset to factory defaults, and also reflashed the stock rom, after this I found out that my baseband and imei where null (not sure if this was the main reason for not having service, but at least looks like)
What is the correct way of fixing unknown baseband/imei? reflashing the modem?
My phone was bought in south africa last year, and now I'm living in brazil.
Model: (Note3) SM-N900
South Africa - XFE
PDA: N900XXUDND1
CSC: N900OJVDND1
MODEM: N900XXUDND1
Where to download the correct modem firmware? any other ideas/suggestions that I should try?
Thanks
Click to expand...
Click to collapse
- Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
- Select firmware for your device/CSC to download. You can flash full firmware via Odin, or extract and get 2 files: modem.bin + NON-HLOS.bin.
- To flash the modem, make sure to enter download mode by completely switch off the phone, and boot to download mode by hardware key combination. Flash modem.bin first, reboot, then flash NON-HLOS.bin.

Hello vndnguyen,
I've checked my phone info/firmware with Phone Info Samsung app, and it also pointed to the South Africa, XFE rom.
I did uncompressed the tar.md5 file but did not found the file NON-HLOS.bin. I've just found modem.bin file.
Should I proceed flashing just modem.bin with odin? Flashing only modem.bin would give me a chance to restore baseband version information and imei?
In the past days, I've flashed this rom (the complete md5 rom file), would also the modem .bin be applied while stock rom flashing?
Thank you

Today I called Samsung customer service asking for support, I know that since I bought my phone on another country, they would not give warranty, so I was ready to pay for support and have my phone fixed.
Samsung denied any kind of service on my phone, saying that they only support phones bought in brazil.
They also told me that I should look for any other 3rd party support.
I started a complain at 'reclameaqui', but anyway, I'm quite sure that this is going nowhere.
http://www.reclameaqui.com.br/10344...cs/galaxy-note-3-suporte-negado-pela-samsung/
Please let me know if you have any suggestions or things that I should try.
Thank you

Rom 442 pologne... boot download mod CP GNG1 in ap case odin and reboot recovery reset all data. Good luck

Thanks for the advice, but looks that I got lucky....
After registering my complain at "reclameaqui", Samsung changed their position and called me offering an option for repairing my phone.
Tomorrow I will be shipping my phone to their support center.
I will come for an update when the phone comes back.
Thank you

Today I received my phone from Samsung.
They didn't fixed the phone and they also informed me that they where unable to fix it since the required parts for fixing aren't available in Brazil.
So I guess that now I have a big useless phone that can be used only to hold some papers in place.
Any ideas or suggestions would be highly appreciated.
Thanks.

Go to this thread:
http://forum.xda-developers.com/showthread.php?t=2475714
Try and download the XXUBMI2 modem and flash it through Odin. Make sure you have auto restart off and when it's flashed, pull the battery from your phone and reboot back into download mode. Then flash the modem again, this time with auto reboot on. That should make sure it's flashed. Restart your phone and then see if all is working. I've had issues like this before, and it turned out to be modem related, but my phone is the N9005. It's worth a try though

Brownie2k said:
Go to this thread:
http://forum.xda-developers.com/showthread.php?t=2475714
Try and download the XXUBMI2 modem and flash it through Odin. Make sure you have auto restart off and when it's flashed, pull the battery from your phone and reboot back into download mode. Then flash the modem again, this time with auto reboot on. That should make sure it's flashed. Restart your phone and then see if all is working. I've had issues like this before, and it turned out to be modem related, but my phone is the N9005. It's worth a try though
Click to expand...
Click to collapse
Hello Brownie2k,
I've followed your advice and flashed the modem using Odin (first time removing the battery, and second time with auto reboot), still with imei/baseband unknown .
Also tried to flash the stock rom again (XFE), and repeated the modem flash... same issue
Is XXUBMI2 the correct modem file for my phone? Should I also try the other modems? I've tried to follow the link to samsung firmware checker but the page seens to be broken
Thank you!!

eduardogsilva said:
Hello Brownie2k,
I've followed your advice and flashed the modem using Odin (first time removing the battery, and second time with auto reboot), still with imei/baseband unknown .
Also tried to flash the stock rom again (XFE), and repeated the modem flash... same issue
Is XXUBMI2 the correct modem file for my phone? Should I also try the other modems? I've tried to follow the link to samsung firmware checker but the page seens to be broken
Thank you!!
Click to expand...
Click to collapse
Any Solution you find? tried above suggestions no luck

Your imei and baseband is there but doesnt recognize by your rom. Pls download firmware has baseband in it like *****NG1 and flash though ODIN. Your imei and baseband will be back. You can download firmware here
For 9005
http://samsung-updates.com/device/?id=SM-N9005
And 900
http://samsung-updates.com/device/?id=SM-N900

i had same issue and flashed different modems and one worked.
for me nothing was working correctly untill i unticked F.reset time and Auto reboot,
i just manually rebooted my phone when odin job was finished.