No Signal after 4.4.2 update - Galaxy S 4 Q&A, Help & Troubleshooting

Hey Guys,
Today I updated my i9505 from Cynogen Mod 10.3.1 to the new "[AOSP] Official 4.4.2 - S4 Google Edition - Final-R1.1" by Jamal, but I read that you needed to update to the leaked 4.4.2 before flashing so that the modem and bits are upto date before flashing any 4.4.2 ROMs or else you could end up with no wifi after flashing.
So I followed these instructions to flash the leaked 4.4.2:
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
Which all went well but I couldn't get Wifi after flashing, and (probably not important) but the default language it choose during the setup was Dutch??? Seeing as I couldnt get the wifi to enable I decided to flash Philz Touch Recovery v6 and then put Jamal's "S4 Google Edition - Final-R1.1" by putting it onto the SD card and flashing through Philz recovery.
Flashing went without a problem.... only thing is now I cant get Vodafone (UK) signal 80% of the time, the other 20% I do get signal and can make calls, just seems strange as previously 80% I WOULD get signal!
Did I do something wrong? I had a really bad feeling that flashing the CP, BL and CSC has somehow messed things up......please help!

Same problem, bump.

ColdIce23 said:
Same problem, bump.
Click to expand...
Click to collapse
I just fixed the problem, ColdIce23, check your Baseband Version under Settings > About Device, I bet yours is still set to the original baseband version like mine was...
1) Re-Download the Baseband for the leaked 4.4.2 rom (Here)
2) Open Odin 3.09 and do the following:
Ok it worked.
If anyone else is having issues with the baseband not changing, do this.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
Now I have FULL SIGNAL! .....so far..... will report back once I have left work but this is a good sign as I had no signal what-so-ever 5 minutes ago!

Flasing a 4.4.2 Modem works well with the Kit Kat based roms. Two to choose from NA1 or NA5, depending on what bootloader your on flash the appropriate modem files.
I've got NA5 on the 4.4.2 GE Rom with Three and no signal issues as of yet.

treesmoker said:
I just fixed the problem, ColdIce23, check your Baseband Version under Settings > About Device, I bet yours is still set to the original baseband version like mine was...
1) Re-Download the Baseband for the leaked 4.4.2 rom (Here)
2) Open Odin 3.09 and do the following:
Now I have FULL SIGNAL! .....so far..... will report back once I have left work but this is a good sign as I had no signal what-so-ever 5 minutes ago!
Click to expand...
Click to collapse
My I9505 baseband version is I9505XXUFNA5. Is not it the updated one?

kamrul.auntu said:
My I9505 baseband version is I9505XXUFNA5. Is not it the updated one?
Click to expand...
Click to collapse
Yes you the latest baseband available.

treesmoker said:
Hey Guys,
Today I updated my i9505 from Cynogen Mod 10.3.1 to the new "[AOSP] Official 4.4.2 - S4 Google Edition - Final-R1.1" by Jamal, but I read that you needed to update to the leaked 4.4.2 before flashing so that the modem and bits are upto date before flashing any 4.4.2 ROMs or else you could end up with no wifi after flashing.
/QUOTE]
I think u missunderstood something. For the Kitkat Google Edition u do not have to flash the leak before. Its only for the Samsung Touchwiz Version of Kitkat
tapatalked by an Echoenian
Click to expand...
Click to collapse

nikzDHD said:
Flasing a 4.4.2 Modem works well with the Kit Kat based roms. Two to choose from NA1 or NA5, depending on what bootloader your on flash the appropriate modem files.
I've got NA5 on the 4.4.2 GE Rom with Three and no signal issues as of yet.
Click to expand...
Click to collapse
I flashed the NA5 modem which seems to have failed the first time round, as it didnt actually change the baseband version in settings. Since flashing a second time (when it actual flashed properly) I now have full signal...... but I have another problem now:
When I click the dailer and select a person to call, the screen goes black and I dont see/hear any indication that a call has initiated. I tried with my wife and her phone rings and she can answer the call, but my screen is still black with no sound....
I have tried wiping data / davlik / cache and installing the rom from scratch, but I still get the same issue?
UPDATE:
Right so I just flashed CM11 as a test, and still can't make calls, so obviously not a ROM fault..... does the BL, CP or CSC have anything to do with the making calls procress?

I've got a similar issue.
I've got a M919V running Jamal's 4.3 GPE rom, but after flashing Jamal's 4.4.2 GPE i get no signal. After going into settings and selecting network the signal lasts, but after the screen goes off signal is once again lost.
Is there a procedure to follow that will fix this? This is found when when flashing many 4.4 roms.
-Thanks

Well, I get signal when I'm near a cell tower...
No changes tho. Still same problem.

Hi guys,
I'm wondering if you have resolved your modem problems?
I flashed to Jamal's 4.4.2 version 1.2 and I don't have a signal now.
I flashed the modem to NA5 but styill no signal. Also I can't even check my CSC using *#1234# as "Mobile network not available"
Any suggestions?
Thanks.

Hi Duskin,
For me, I think it's releated to the phone itself as I got a screen replacement. I haven't solved the problem yet because I got to get back to the store where I got my screen replaced.
Sent from my LG-P880 using Tapatalk

Related

[Q] Help reverting to stock... usual steps not working

Goal:
Latest firmware info from SamMobile
GT-I9505 Galaxy S 4 LTE
PDA: I9505XXUBMGA
CSC: I9505OXXBMG3
MODEM: I9505XXUBMGA
Previous set up:
Custom Recovery. Philz Touch
ROM http://forum.xda-developers.com/showthread.php?t=2352258
I has also attempted to update the base band when on this rom to MGA to the About device Baseband version stayed at XXUBMEA
Situation: I was getting lots of force closureswouldn'tentually it just wouldnt reboot, thenre-flashedvery failed. I reflashed the recovery and restored from wouldn'thowever it still wouldnt boot. (About 90% of the way through the bSamsungmation the audio samsung logo sound died. The Samsunghen went to the "samsung" static image with the blue LED light on and just stayed there... for about 30 mins before I force shutdown the phone.
I the attempted to flash stock ROM (listed in Goal above) downloaded from SamMobile. The same thing happened again. Boot gets stuck. I got into stock recovery and wre-flashedactory reset and reflashed. The ROM installed but I had no wifi. I then flashed the I9505XXUBMGA modem. Reboot and I had wifi. However About device still shows XXUBMEA baseband.
I wanted to see if I was able to get OTA updates from Samsung however Samsung update app is saying that the device is modified... so something isnt quite right yet. Im guessing it might be to do with the modem / baseband but to be honest I am a bit lost.
Screen shot of my current About Device Information. Also Device Status is showing as custom..
Thinking outloud here... would a Root->TriangleAway->reset counter etc->flash philz touch->full wipe for new ROM->boot to download->Odin flash stock fix it? Or could that do any further damage?
First install chainfires triangle away to reset your flash counter. For this you need root.
Then do a factory reset in recovery and flash stock with odin.
You wont get ota when flash counter >0 so give it a try.
Hopefully this helps
EDIT: If the new modem wont appear after a odin flash then uncheck the auto reboot option in odin and flash the modem twice, that helped for me.
Device Status is showing as custom, because you had flashed non-stock rom...
so the wifi not working, but can you make call??
The first time I flashed OMEGA ROM, wifi did not work, but flashed Adam kernel fixing the issue.
Look at his attachment, mobile connection seems working
@polcup please report back if it worked.
cellegg said:
Device Status is showing as custom, because you had flashed non-stock rom...
so the wifi not working, but can you make call??
The first time I flashed OMEGA ROM, wifi did not work, but flashed Adam kernel fixing the issue.
Click to expand...
Click to collapse
Wifi is now working after I flashedlashed the I9505XXUBMGA modem. Rebooted and I had wifi. However About device still shows XXUBMEA baseband.
Calls and mobile date is fine.
_sebha said:
Look at his attachment, mobile connection seems working
@polcup please report back if it worked.
Click to expand...
Click to collapse
Yep, I will try that over lunch and see if it works. Not sure that will get me to the XXUBMGA modem though but its certainly a step in the right direction.
I really appreciate both your replys. Thanks.
Look at my edit in first post.
Uncheck auto reboot in odin and flash only the modem twice (manual reboot to download mode after first flash) after second flash reboot device.
That worked for me
_sebha said:
Look at my edit in first post.
Uncheck auto reboot in odin and flash only the modem twice (manual reboot to download mode after first flash) after second flash reboot device.
That worked for me
Click to expand...
Click to collapse
Superb! I will try that as well. Thanks!!
Update
I was unable to root I9505XXUBMGA. CF-Autoroot didnt stick. I tried a couple of installs. One through Odin and one through CWM. Neither took.
I flashed an older pre-rooted stock rom I had XXUBMEA and then ran Triangle away. It returned the counter to '0' and brought the status back to official.
So now im back to stock MEA and to be honest I am happy to stay here for a bit. I will maybe move up to MGA if I find a pre-rooted version.
Thanks for your help.
Sorted!

[Q] Problems with Google Edition ROM form Jamal - V4.0

Hello, i'm writing here since, having less than 10 posts, i can't post in the original thread by Jamal2367
http://forum.xda-developers.com/showthread.php?t=2544474
I live in Italy, operator H3G, 9505, baseband I9505XXUEMK9
I tested all previous release from Jamal (and use his 4.3 v2 daily), 4.0 works fine, no reboots, no FC
I have some problems, network related:
- LTE doesn't work, icon doesn't show up
- can't search mobile networks, only get a long wait then no results
- CAN autoregister, internet and calls works fine
- the dropdown notification window got stuck mid-screen, couldn't find a way to remove it, i rebooted
- roaming data comes default on (not good imo)
- APN: i have an additional new APN, 3 IT, never had that. Switching between 3 and 3 IT doesn't make LTE work
Is anyone experiencing these problems?
mike9055 said:
Hello, i'm writing here since, having less than 10 posts, i can't post in the original thread by Jamal2367
http://forum.xda-developers.com/showthread.php?t=2544474
I live in Italy, operator H3G, 9505, baseband I9505XXUEMK9
I tested all previous release from Jamal (and use his 4.3 v2 daily), 4.0 works fine, no reboots, no FC
I have some problems, network related:
- LTE doesn't work, icon doesn't show up
- can't search mobile networks, only get a long wait then no results
- CAN autoregister, internet and calls works fine
- the dropdown notification window got stuck mid-screen, couldn't find a way to remove it, i rebooted
- roaming data comes default on (not good imo)
- APN: i have an additional new APN, 3 IT, never had that. Switching between 3 and 3 IT doesn't make LTE work
Is anyone experiencing these problems?
Click to expand...
Click to collapse
I was on a lower baseband and did an upgrade to I9505XXUEMK9 using this thread -> http://forum.xda-developers.com/showthread.php?t=2192025
I only upgraded the modem.bin using Odin and thus did not have the knox bootloader and also did not need to flash the LTE modems.
Next I flashed Jamal's KK 4.4 GE S4 v4.0 rom (full wipe data, cache and devlik) that already have faux123's kernel bundled in it, and flashed updated superSU 1.8 and I did not have any problems with any of your problems mentioned above.
I suggest going to http://www.sammobile.com/firmwares/2/ to check if you are using the correct firmware.
I"m on modem mj8 and v2 4.4 of jamal. everything is stable and fast.
Try to do a full wipe: system,data,cache.dalvik. than flash the rom.
First flash the modem via odin 3.04.
phone works perfectly on 4.3
i always clear cache before and after flashing roms, sometimes i even format /system
I tried 4.4 AOSP and LTE works just fine, tried another GE and no LTE again, so it must be something related to GE
i'm gonna flash MKE to see if it makes any difference
??
i flashed I9505XXUEMKE but in info i still see MK9
mike9055 said:
??
i flashed I9505XXUEMKE but in info i still see MK9
Click to expand...
Click to collapse
If you are having issues with the baseband not changing after flashing, please do the 'manual', more troublesome way
1) When in Odin, remember to select Phone, not PDA and UNTICK AutoReboot
2) Flash modem
3) Once done, reboot once again into Download Mode
4) Flash Modem once more like in Step 1-2
5) Once done,unplug then reboot device manually.
P.S. For me, I rebooted my device manually in Download Mode by lifting the battery after Odin has completed flashing
kenshi08 said:
If you are having issues with the baseband not changing after flashing, please do the 'manual', more troublesome way
1) When in Odin, remember to select Phone, not PDA and UNTICK AutoReboot
2) Flash modem
3) Once done, reboot once again into Download Mode
4) Flash Modem once more like in Step 1-2
5) Once done,unplug then reboot device manually.
P.S. For me, I rebooted my device manually in Download Mode by lifting the battery after Odin has completed flashing
Click to expand...
Click to collapse
THX! Using these steps now i'm on MKE (strange fact, i have flashed modem several times and never got stuck)
For now i restored a 4.3 android, gonna try again soon
mike9055 said:
THX! Using these steps now i'm on MKE (strange fact, i have flashed modem several times and never got stuck)
For now i restored a 4.3 android, gonna try again soon
Click to expand...
Click to collapse
Haa! Sure! Glad that helped!

[Q] [Omega v19 4.3] Galaxy S4 i9505 Losing Cellular Connection On Screen Lock

Hey,
I recently installed Omega Rom v19 (Android 4.3) on my Samsung Galaxy S4 i9505 Intl.
All of a sudden it loses cellular connection instantly whenever I lock the phone with the power key. It will take a couple of minutes before it will come back and this is REALLY annoying.
Any help on this would be great, could it be a modem issue? My baseband is I9505DVUAMD8
I installed a 4.4.2 Google Edition Rom prior to this one and it did the same thing, I have no idea how to fix it!?
Thanks!
thefury91 said:
Hey,
I recently installed Omega Rom v19 (Android 4.3) on my Samsung Galaxy S4 i9505 Intl.
All of a sudden it loses cellular connection instantly whenever I lock the phone with the power key. It will take a couple of minutes before it will come back and this is REALLY annoying.
Any help on this would be great, could it be a modem issue? My baseband is I9505DVUAMD8
I installed a 4.4.2 Google Edition Rom prior to this one and it did the same thing, I have no idea how to fix it!?
Thanks!
Click to expand...
Click to collapse
Flashed a new modem which did not work, could it be a kernel issue perhaps? What is a recommended kernel for use with Omega v19?
Cheers
thefury91 said:
Flashed a new modem which did not work, could it be a kernel issue perhaps? What is a recommended kernel for use with Omega v19?
Cheers
Click to expand...
Click to collapse
I doubt you flash it right follow this instruction. and check your baseband version if it changes that should fix your dropping issue. Remember to turn off your phone Manually before flashing anything via odin.
Use Odin
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Repulsa said:
I doubt you flash it right follow this instruction. and check your baseband version if it changes that should fix your dropping issue. Remember to turn off your phone Manually before flashing anything via odin.
Use Odin
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
Thanks for the reply,
After flashing the modem I checked and the baseband had changed to the new modem, I am trying a different modem soon, once it has downloaded. I will see how I go with this new one.
Cheers

Problems going back to stock

Hi,
Was running CM11 on my GS4. I want to go completely back to stock however I'm hitting issues with it.
Downloaded the 02UK firmware file from Samware, flashed it in Odin, did a wipe before and after. Takes a while to boot in each time, sometimes needs a battery pull etc.
Now, I can load up fine - however no matter what I try, wifi won't turn on, a lot of the time signal will drop/ turn off when I lock the screen. Have tried flashing 4.2.2 as well, exactly the same and on the latest flash noticed as issue with the recovery, won't allow a data wipe/ partition in recovery, just flashes something red and then reboots.
I know this has probably been asked a milion times before. But hoping someone can help me get back to stock without the issues!
Thanks in advance.
aholloway21 said:
Hi,
Was running CM11 on my GS4. I want to go completely back to stock however I'm hitting issues with it.
Downloaded the 02UK firmware file from Samware, flashed it in Odin, did a wipe before and after. Takes a while to boot in each time, sometimes needs a battery pull etc.
Now, I can load up fine - however no matter what I try, wifi won't turn on, a lot of the time signal will drop/ turn off when I lock the screen. Have tried flashing 4.2.2 as well, exactly the same and on the latest flash noticed as issue with the recovery, won't allow a data wipe/ partition in recovery, just flashes something red and then reboots.
I know this has probably been asked a milion times before. But hoping someone can help me get back to stock without the issues!
Thanks in advance.
Click to expand...
Click to collapse
Mind giving as More information about this Phone? Such as Model,baseband,Stock roms your were trying to flash and Etc . Cuz we cannot help you If you were like " Help my Phone got No wifi etc." LOL If your asking for help atleast Provide us more Information and such . thank you.
Repulsa said:
Mind giving as More information about this Phone? Such as Model,baseband,Stock roms your were trying to flash and Etc . Cuz we cannot help you If you were like " Help my Phone got No wifi etc." LOL If your asking for help atleast Provide us more Information and such . thank you.
Click to expand...
Click to collapse
Yep - it's the i9505, baseband is 19505XXUBMEA and build number is JDQ39.I9505XXUBMF8.
Hope that helps, let me know if I have missed anything.
Thanks
aholloway21 said:
Yep - it's the i9505, baseband is 19505XXUBMEA and build number is JDQ39.I9505XXUBMF8.
Hope that helps, let me know if I have missed anything.
Thanks
Click to expand...
Click to collapse
Your having a signal issue because you need to flash a diffetent modem mate. And that should fix ur problem on signal issue . Do you mind booting into download mode and check if iy say the entry knox warranty void. Thanks
Sent from Hell ?
Currently 4.2.2 as I read the 4.3 update had caused some of these issues (although I want to be on stock 4.3.
I did notice after I posted that the baseband was for German phones (no idea how that got on there). So I flashed the a new modem and baseband is now at I9505XXUEMK8 which is supposed to be the correct one (if not please advise!?). However Wifi still not working. Tried the wifi fix file for the baseband, didn't work, also tried the root /data/misc/wifi/wpa_supplicant rename fix. Didn't work.
Are you able to tell me which Stock Rom/ Modem etc to flash or anything else to try??
Thanks in advance!
aholloway21 said:
Currently 4.2.2 as I read the 4.3 update had caused some of these issues (although I want to be on stock 4.3.
I did notice after I posted that the baseband was for German phones (no idea how that got on there). So I flashed the a new modem and baseband is now at I9505XXUEMK8 which is supposed to be the correct one (if not please advise!?). However Wifi still not working. Tried the wifi fix file for the baseband, didn't work, also tried the root /data/misc/wifi/wpa_supplicant rename fix. Didn't work.
Are you able to tell me which Stock Rom/ Modem etc to flash or anything else to try??
Thanks in advance!
Click to expand...
Click to collapse
Try to find the right Stock rom from here that base in your country mate and flash it via odin . Like i told you if you boot into download mode and check if there is knox void warranty? If you dont have that flash inly 4.2.2 stock rom but if you see that then feel free to flash a stock 4.3
Ok - So I have flashed the UK 4.3 BTU rom (Jss15J.I9505XXUEMKF) and have a baseband of I9505XXUEMK8 (which was the O2 one). Signal is fine no issues etc.
Still Wifi won't turn on though.
What do I need to do for this bit??
EDIT: As per your last post, I have no idea about Knox? I didn't see anything show up on download mode.
It also doesn't seem to be working now. The rom crashes when calls are received and wont dial etc. Ok - so should I go back and install the earliest 4.2.2 Rom version for 02 as the phone came with? Then update through OTA?
aholloway21 said:
Ok - So I have flashed the UK 4.3 BTU rom (Jss15J.I9505XXUEMKF) and have a baseband of I9505XXUEMK8 (which was the O2 one). Signal is fine no issues etc.
Still Wifi won't turn on though.
What do I need to do for this bit??
EDIT: As per your last post, I have no idea about Knox? I didn't see anything show up on download mode.
It also doesn't seem to be working now. The rom crashes when calls are received and wont dial etc. Ok - so should I go back and install the earliest 4.2.2 Rom version for 02 as the phone came with? Then update through OTA?
Click to expand...
Click to collapse
Well I told you if you dont have an Entry of Knox Warranty Void when you boot into download mode then flash the 4.2.2 Stock rom :S But you already flashed the 4.3 so you can no longer downgrade to 4.2.2 ... Can you please Dial *#1234# and write it down somewhere . and then Download this Wifi Fix and flash it Via odin and After reboot still did not work then Try to download and extract this file and Flash the .tar Via odin by selecting Phone/CP And if this file did not work after flashing then please feel free to play one of the wifi fix from Here Start's from MK9 until MKE might fix your issue.
Thanks for the help Repulsa. Will try that shortly and let you know the results!
EDIT - What about the Rom issues itself? I haven't had a chance to test everything, but I can't make calls. It calls the person but the screen freezes blank and then flickers. Should I reinstall the rom first or use another?
aholloway21 said:
Thanks for the help Repulsa. Will try that shortly and let you know the results!
EDIT - What about the Rom issues itself? I haven't had a chance to test everything, but I can't make calls. It calls the person but the screen freezes blank and then flickers. Should I reinstall the rom first or use another?
Click to expand...
Click to collapse
Do you mind dial *#06# if you have the right imei (dnt type ur imei here) and dial *#1234# and write it down here pls . And try to do a factory reset and wipe cache in rexovery before you flash anything.
Sent from Hell ?
Repulsa said:
Do you mind dial *#06# if you have the right imei (dnt type ur imei here) and dial *#1234# and write it down here pls . And try to do a factory reset and wipe cache in rexovery before you flash anything.
Sent from Hell ?
Click to expand...
Click to collapse
IMEI is the same, except for an extra /1 on the end?? Rest as follows;
AP I905XXUEMKF
CP I9505XXUEMK8
CSC I9505BTUEMK5
Tried everything from you earlier post except going through the final wifi fix versions. Nothing has worked so far though....
I'm in pretty much the boat.... I was using Omega ROM 4.3 but wanted to go back to Stock unrooted firmware.
I flashed Stock 4.3 (XXUEMKF to be precise - both Baseband and Build) using Odin 3.04
Now I cant turn wifi on
When I go into Download mode I dont have any KNOX lines and my Binary is Custom not stock!!!
Don't want to mess things up anymore than I already have by trying to flash everything under the sun!!!!
Back to using my faithful Note 2 for the time being then I guess!!!
Sent from my GT-N7100 using xda app-developers app

:( How can I recover this i337m in 2019

I have lost the phone that has been working for ages. I am broke atm. Please help I need to use my phone. I was trying to get my radio to work again because I lost data a couple weeks back. So I have spent more time than I even should have for this trying to fix it.
I have run Odin 3.07 with
lineage-15.1-20190210-UNOFFICIAL-jfltexx
lineage-14.1-20190212-nightly-jfltexx-signed
and
open_gapps-arm-7.1-pico-20190209
I have wiped everything and tried 2 different system boards ;
from download mode I have
used I337MVLSGQB1_I337MOYAGQB1_I337MVLSGQB1_HOME.tar
to reload with nothing checked but F. Reset Time.
pulled out the cable then the battery.
went straght to recovery (system was going there already) to do first stage unpack with android and progress bar.
It said BAR and END
I went in back in after restart, and a full wipe.
And after a long wait .. the system very glitchy, slow like something was running in the background (modem ?) if I open the phone app it wont close and calls are silent. then resets over and over..
I have tried custom roms, and flashing latest modem and original ? Whats up ? anyone
PLEAESSEEE help soon .. I am going crazy cuz this is literally my only phone and I need to use it !!!!
Had an old system board and tried to replace it and ended up in the same place with the second board ?!?! what is going on !
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
I know your post was a while ago but you cannot use Odin to flash a custom ROM.
Are you flashing the latest stock ROM from sammobile.com or updato.com?
audit13 said:
I know your post was a while ago but you cannot use Odin to flash a custom ROM.
Are you flashing the latest stock ROM from sammobile.com or updato.com?
Click to expand...
Click to collapse
I ended up using the pixel experience rom. I am sure I have the wrong bootloader and modem for i337m though. It works with data when I reset network settings and re-enable. Data each reboot. For the longest time lineage 9505 ROMs worked until like Feb 5th I saw the data just fall use just fall off. I couldn't get chatr to work anymore. It was a nightmare I went to stock and , pitted the phone and it would only function until I added TWRP and tried a nougat rom or even with latest modem. Wifi was evn a problem. Now I am using like a lollipop bootloader with the green battery charging and modem isn't right. When I flash a different modem and bootloader in Odin and rip the battery and then cableit doesn't even change .
Wtf?
futiless said:
I ended up using the pixel experience rom. I am sure I have the wrong bootloader and modem for i337m though. It works with data when I reset network settings and re-enable. Data each reboot. For the longest time lineage 9505 ROMs worked until like Feb 5th I saw the data just fall use just fall off. I couldn't get chatr to work anymore. It was a nightmare I went to stock and , pitted the phone and it would only function until I added TWRP and tried a nougat rom or even with latest modem. Wifi was evn a problem. Now I am using like a lollipop bootloader with the green battery charging and modem isn't right. When I flash a different modem and bootloader in Odin and rip the battery and then cableit doesn't even change .
Wtf?
Click to expand...
Click to collapse
I'm not sure how you could flash the wrong bootloader unless it was flashed using TWRP or CWM. To confirm, boot into download mode to see the model # listed on the screen.
Are the modem and bootloader matched; i.e. the phone is running a 5.0 bootloader and modem? To easily ensure that both are matched, you can flash the latest stock ROM using Odin.
If the modem version is not changing after being flashed, it is possible that the internal memory is faulty.
audit13 said:
I'm not sure how you could flash the wrong bootloader unless it was flashed using TWRP or CWM. To confirm, boot into download mode to see the model # listed on the screen.
Are the modem and bootloader matched; i.e. the phone is running a 5.0 bootloader and modem? To easily ensure that both are matched, you can flash the latest stock ROM using Odin.
If the modem version is not changing after being flashed, it is possible that the internal memory is faulty.
Click to expand...
Click to collapse
Can you tell me what version the latest boot loader and modem is for Canadian i337m
I haven't had an s4 for a long time but it was running the latest OH1 firmware: https://updato.com/firmware-archive-select-model?record=8D5422F720B911E6949E0CC47A44B7B2

Categories

Resources