Database Users

[Q] CM6 / CM7 - CM7 won't work.

Hey guys!
Got a little problem here!
Here's the situation, I'm perfectly able to flash CM6.10 (? - The latest stable for Wildfire anyway), but I've had no luck when trying to flash CM7. Either, it gets stuck at the white HTC splash after flashing and rebooting, or it gets stuck at the CM splash screen. The arrow just stops moving around in circles and freezes!
Not completely sure what this could be, I clear everything before I flash CM7 so ... And I ofc admit that I'm no sort of expert in this area, as almost every single flash has been perfectly fine to me, so I thought that you guys could figure this one out .
Regards

Try flashing kernel v4.1 from the HCDR.Kernel thread from the Wildfire Android Development Zone. Since you say you have cleared everything as stated by the first post in CM7, guess I wont be going into that.

I actually tried that as a last resort before going to bed yesterday, and that solved the problem! So thanks anyway, you were right !
Later on I installed the Gapps for CM7, but then when i booted my phone, i got the "Low Memory"-warning that wants you to remove some apps, and all the apps started to crash all the time. Especially the browser, not entirely sure of what's causing all this!

Hi,
I had the same boot problem and 4.1 also fixed it for me. I've not had any low memory issues but I only really have the google applications... One problem I do have is that I don't seem to be able to pair with any Bluetooth devices, I just don't get long enough to type in the PIN!
Can't post a report on the dev thread as I'm new here...
Andy
PS Which 6.10 have you been using? Did you have any Bluetooth issues?

Fryo X red freez problem

i have installed FROYO x RED build it seem to work fine but after 5 min it freez i must remove battery to rebot.
any ideas to fix it?/

yeah i got the same problem

how to switch the boot to android only
everytime it freezes and after booting it winmo is booted and everytime i have to open haret

Same problem here, freezes every time. What is a decent OS that is stable, and doesn't eat the battery? And has a camera that actually works?

Kernel
Hey Guys,
Its most likely a Kernel problem so you need to update the kernel
to do this you simply have to overwrite the files "modulesxxxxxx.tar.gz" and “zImagexxxxxx” with the new ones
you can try these Kernels.
http://forum.xda-developers.com/showthread.php?t=788815
http://glemsom.users.anapnea.net/android2/htc-msm-linux/
Or
Search the forums for kernels
If i have helped give thanks
TjRoidz

Freezes and reboots

There is a problem. Phone spontaneously freezes and reboots .. The last hope for your forum .. Immediately apologize for my English. I use google translator.
The phone was in the store with 74 CU firmware. Put Root, Russian patch cmw. Everything was fine, but the phone did not work a day, and they almost never used, and the use of the network in the first place. I was advised to calibrate the battery, and the program defy baseband. I'm not used the phone. A few days later there were complaints that the phone periodically freezes and goes to reboot ... Only helps the removal of the battery ... When I received it a few days, it was impossible to use it. In any action it hangs. That is, I press the menu, configuration vayfay and everything freezes. I tried to flash the firmware 139. redlayt through 3.9. In airplane mode the phone is not hung up about .. So I thought that the case in GSM module .. But he, too, hung .. In the end, I installed CyanogenMod 7. Phone is better, but sometimes it still hangs. And it is not logical and unexpected. Working half a day. Then suddenly you come into a notebook and all ... crashed. In the case of market crashes.
I tried to change the CPU frequency. voltage. I tried to dump the entire cache and flash again .. does not help. It is your last hope. Perhaps this marriage. Help please.

full sbf
2.3.6 uk 188 defy full sbf wifi does not work properly the signal drops or reboot motorola closed bootloader s*ck

Anyone can help me? =(

have to send back this phone to CU =(((( so bad

I'm in uk with a second hand defy from eBay. Was just about to start a new thread detailing my woes. I've tried flashing several SBFs with no joy. Lots of fcs and reboots sometimes frequent sometes and hour apart. Seems to be mainly whilst using gps even happens when in flight mode.
Could it be incompatible radios? I would have though I would have problems with wifi or signal but I do not.
I've flashed the stock uk orange 2.2 rom and also tried the stock 2.3.4 sbf.
My next port of call was going to be cyanogen mod, however I am unable to install as I can find no way to instal a custom recovery. I am able to atchive root using super one click. However this OS where the success ends.
If someone could indicate a fool proof way of instantly CWM and CM I believe this rom will be my last hope, although ready the first post in this thread makes me think otherwise :-(
Your thought are welcome
Cheers

[Q] Defy+ vsel and other questions

Hello!
Just switched to Defy+ from another android phone and I need few advices.
I couldn't get root access with original firmware (BL7).
Tried superoneclick (recommended and newest) and doom lord method.
Both have stopped at "sending 185 (or 9) zerglings" after finishing 145.
So I flashed rooted firmware (DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed), installed 2ndinit 2.3 and installed Quarx CM 7.2
build sep 23rd.
The kernel is ge281be6 51 #1.
Second problem is with setvsel. It does nothing. I can set 1 or even 0 for 300 MHz and phone works fine.
Then I tried setXperia and app works fine.
However, since vsel option are available at boot menu, I figured why to use app and went to boot to set values.
Both apps see 4 clock domains and all 4 are used when settings are applied.
But, cpu boot settings show 3 options with fourth available with "gb kernel".
Setting 300/600/800/1000 allows only 3 different domains to be visible to system.
CM setting see 300/300/600/800 with 1GHz missing.
Is there any other kernel to be flashed or what am I missing?
The other thing that worries me is that setvsel and setXperia don't show vsel values set at boot menu.
Do those application read data from system or do they have their own set of default values that they list after install?
In other words, are vsel values set at boot sticking?
And additional question about CM 7.2: at random times OS looses connection to google account.
I reconnects back after a minute or two so it's not a big deal but I would like it to stick.
It's not a signal or baseband problem.
Internet connection during these drops functions normally. Starting gtalk restores connection immediately.
Lastly, what CM7 ROM do you recommend for Defy+?
There is a forrest of ROM's with, um, features not clearly written or explained so it's better to ask more experienced users.
I tried installing Jordan's ROM (from 25th I believe) but there is no boot and recovery displays errors (busybox related if i remember correctly).
Thanx!

Root access on stock firmware... Use the better and with HD recording ms2ginger if you need a stock based firmware
As for roms based on cm7.2, I like wiui by wajk for pure performance use builds by quarx or maniac
Remember to use roms based on gb kernel i.e defy+ builds
If you run into any problems while installing the ROM please refer to the excellent all in one beginners guide or post back here
Sent from my MB526 using xda premium

Well, tried euroskank's cm7 from 26th october and vsel values (clocks too) set at boot stick as expected and setvsel reads them.
Google link drop is still present but I can live with that.

[Q] Little help needed from a Defy+ & CM7.2 user

Hello,
The accelerometer is defective on my Defy+, as a result it stops working sporadically. With the stock firmware it could be reactivated by restarting the phone, but now I have CM7.2 on it, and CM deals with the problem differently: at the first occasion the device file disappeared ( /dev/kxtf9 ) from the system, probably got deleted automatically by the OS. Now I'd like to recreate it manually hoping that it could be a workaround, but unfortunately I don't know the device major and minor numbers. Could someone please tell them to me ? Thanks.