[Q] [Solved] Data not being formatted! - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

Hi,
I have installed Ultra Gb revolutionary 1.6 Rom and have been using it for a while. I wanted to remove all content on phone..so i tried to wipe data and reinstall the rom again. Rom flashed correctly and i rebooted the phone..but user apps were not removed, they are still on the phone.
I tried changing kernel, flash another rom, flashed utra gb again, the apps are still there, why?

You can try to conenct your sdcard to your PC and delete .android_secure, it contains sd apps that don't get deleted with /data
If it doesn't work you can use Wipe data option in settings :good:

Killnolife said:
You can try to conenct your sdcard to your PC and delete .android_secure, it contains sd apps that don't get deleted with /data
If it doesn't work you can use Wipe data option in settings :good:
Click to expand...
Click to collapse
Thanks for your reply, i tried all of those, but its still there

marcusflint said:
Hi,
I have installed Ultra Gb revolutionary 1.6 Rom and have been using it for a while. I wanted to remove all content on phone..so i tried to wipe data and reinstall the rom again. Rom flashed correctly and i rebooted the phone..but user apps were not removed, they are still on the phone.
I tried changing kernel, flash another rom, flashed utra gb again, the apps are still there, why?
Click to expand...
Click to collapse
Well, that may be a kernel issue! Try to install stock kernel/ROM via odin and get it all clean!

lionelsuyog said:
Well, that may be a kernel issue! Try to install stock kernel/ROM via odin and get it all clean!
Click to expand...
Click to collapse
I think that's not the kernel, he said he tried to change it, i think he haves a problem because /data is not mounted,
OP use CWM and mount /data, then do wipe data & cache

Killnolife said:
I think that's not the kernel, he said he tried to change it, i think he haves a problem because /data is not mounted,
OP use CWM and mount /data, then do wipe data & cache
Click to expand...
Click to collapse
While selecting Factory reset on cwm, data & cache are automatically mounted and both data, cache and .andtoid_secure is wiped! I'm jst sharing my experience, it happened with me few times while using percy_g2 kernel! The best option for me was odin!

In CWM in general partition is mounted when wiped, I think switching kernel and try again
Flash another CM kernel and wipe data then return to your kernel, or do a factory reset from setting in phone

Try to use odin. Your userdata.img may be Corrupted
Press Thanks if Helped

Well a simple solution to the problem :
1.Go to CWM,mount all the partitions and flash percy's kernel (CyanogenMod #2)
2.Go back and then go to advanced > reboot recovery
3.Now you'll be in Percy's recovery and from there,under mounts and storage,format data and format cache.
4.Go back and then go to mounts and storage and mount all the partitions.
5.Flash back to bieltv.3's kernel and reboot.

Finally, i had to flash flash stock Rom via Odin and go back to ultra gb.. Thanks for all the help guys

Related

Cannot flash any ROM's

Hello, I have recently been unable to flash ROM's succesfully.
I have Clockwork MOD 4.0.0.2 installed as it came with CF-Root, and I am on stock 2.3.5 KI3.
I have tried flashing several roms, and while it says install complete, whenever it restarts, it is on a boot loop, where it won't go past the Galaxy S II bit with the yellow triangle, I have to flash the stock rom again using odin to even use the phone, I have tried to flash other recovery versions, like 4.0.0.14 and 5.1.2.6 (I think it is) but they all come up with errors mounting or getting recovery.log or something, could you please help?
Did you try to do a full wipe?
Most issues can be resolved by this.
In the CWM menu chose the factory reset/full wipe. (Don't worry it won't touch your files on the internal SD card)
Do a cache wipe and in the advanced menu do a dalvik cache wipe.
Some recommend to do this procedure twice, but you should be settled with doing it once
Let me know if it helped?
theMartyMcfly said:
Did you try to do a full wipe?
Most issues can be resolved by this.
In the CWM menu chose the factory reset/full wipe. (Don't worry it won't touch your files on the internal SD card)
Do a cache wipe and in the advanced menu do a dalvik cache wipe.
Some recommend to do this procedure twice, but you should be settled with doing it once
Let me know if it helped?
Click to expand...
Click to collapse
Yeah I did all that, didn't help, the progress bar gets half way and says complete :S I have downloaded the ROMs several times aswell incase they were corrupt, still didn't help.
Take out the battery, wait a bit, put it back in. Do all the wipe and formatting procedures (perhaps twice) and format the internal sd card as well and wipe the battery stats (just to be sure)
Sent from my GT-I9100 using XDA App
Backup EFS folder 1st....
ultramag69 said:
Backup EFS folder 1st....
Click to expand...
Click to collapse
That's probably not a bad idea.
Here's how:
http://forum.xda-developers.com/showthread.php?t=1068193

[Q] Update Paranoidandroid from 1.1a to newest version

Is there a way to make an update from V1.1a to the newest version without a full flash? I wish to avoid a reinstallation of all Apps and settings
I installed 1.2 straight over the top of 1.1 and it worked no problem, all apps and data unaffected.
Otherwise, do a cwm backup, then clean install, then cwm - advanced restore - restore data.
So you have copied the V1.2 Zip-File on the SD card and flashed the version with 'AD recovery' in MAGLDR?
I have flashed v1.4a, from v1.1a .
I did this:
Copied the ROM to my SDCARD, Backed up current ROM (Just in case), wiped dalvik cache, installed ROM, fixed permissions ('cause I installed an a2sd script), rebooted into ROM.
(Took about 17 minutes) at first.
just done a 1.2a to 1.4a dirty upgrade, no backup/restore, just straight over the top, no fix permissions, nothing, , no problems (well, not in first 4 hours anyway)
Marvlesz said:
I have flashed v1.4a, from v1.1a .
I did this:
Copied the ROM to my SDCARD, Backed up current ROM (Just in case)
Click to expand...
Click to collapse
With wich tool do you do that?
, wiped dalvik cache,
Click to expand...
Click to collapse
How i can do that?
fixed permissions ('cause I installed an a2sd script)
Click to expand...
Click to collapse
I don't understand, what you mean with this point
Sorry for much questions and thanks in advance for your help
Marvlesz said:
... wiped dalvik cache, f...
Click to expand...
Click to collapse
Is that the item 'wipe cache partition' in MAGLDR in AD Recovery?
In cwm choose advanced and you will see wipe dalvik
Yes, i found it, thanks for your help.
Do you think additional work is to do to erase dalvik because i'm using Link2SD? If you display an app in this program the part 'Dex' seems linked to dalvik and has moved for apps which are stored on the sd card.
samsamuel said:
I installed 1.2 straight over the top of 1.1 and it worked no problem, all apps and data unaffected.
Otherwise, do a cwm backup, then clean install, then cwm - advanced restore - restore data.
Click to expand...
Click to collapse
And then you have all App, settings, etc. back on the system?
HTCdevel said:
And then you have all App, settings, etc. back on the system?
Click to expand...
Click to collapse
Yep, they never left the system, there was no wipe,,,phone running fine, on 1.2, downloaded 1.4 using phone, restarted into cwm, ran the flash, rebooted, done. I wasn't even at home, I was on the train.
Admittedly there isn't a huge amount,, maybe 10 apps, and some data, but there was no setting up to do except for the PAD /PAL stuff,, contccts, wallpaper, shortcuts, loclscreen shortcuts, all exactly as it had been 4 minutes before.
Marvlesz said:
...fixed permissions...
Click to expand...
Click to collapse
This point is currently open for me.
What does it mean?
it means start cwm and click advanced - fix permissions
have been doing update just flashing over the existing pa, no problem at all. so answer is yes.
HTCdevel said:
...
Do you think additional work is to do to erase dalvik because i'm using Link2SD? If you display an app in this program the part 'Dex' seems linked to dalvik and has moved for apps which are stored on the sd card.
Click to expand...
Click to collapse
This is, hopefully , my last open issue.
HTCdevel said:
This is, hopefully , my last open issue.
Click to expand...
Click to collapse
Ok, let me clarify a few things for you:
1- I backed up my ROM (Because I was expecting a bootloop, so I did a BU just in case, it's not necessary if you know your ROM's going to boot.)
2- I wiped dalvik/fixed permissions because I use (amarullz d2ext) which requires a clean dalvik & fixing permission, if you don't use that script, you don't need them.
3- Other than that, you can do just like sam, install the update on top of your current rom and you should be good to go.
Marvlesz said:
...
2- I wiped dalvik/fixed permissions because I use (amarullz d2ext) which requires a clean dalvik & fixing permission, if you don't use that script, you don't need them...
Click to expand...
Click to collapse
Is amarullz comparable with Link2SD, then i must do it in the same manner?
I have tried it before a few minutes, but it fails in a bootscreen with the HTC logo. Android doesn't start.
What i have done:
1) Copied the file paranoidandroid_hd2_v1.4a.zip to the SD card,
2) Enter MAGLDR
3) AD Recovery
4) Wipe Dalvik, fix permissions
5) Install Zip from SD card
6) choose Zip from SD card
7) choose the Zip and confirmed it
I have made a backup so i could restore the system and everything is like before.
Fix permissions AFTER installing the rom. There's nothing to fix until then.
Marvlesz said:
I have flashed v1.4a, from v1.1a .
I did this:
Copied the ROM to my SDCARD, Backed up current ROM (Just in case), wiped dalvik cache, fixed permissions ('cause I installed an a2sd script), installed ROM, rebooted into ROM.
(Took about 17 minutes) at first.
Click to expand...
Click to collapse
Thanks man for this. When i flash new rom, i did these steps:
Task29
Install Magldr
Partition
Wipe all data/factory reset
Wipe partition cache
Wipe Dalvik cache
Flash ROM
Flash update, addons if nessessary (Do i need reboot before do this step?)
Now i know when use wipe dalvik cache.
I read somewhere about task29 many times make the phone "bad blocks". I did it hundred time when flash new ROM
May i flash new ROM without task29 & install madglr, just do from step 3 above?
Thanks all.

cannot delete from from internal sdcard

I searched but could not find the answer. I'm sure it's a simple fix, but I am a semi-noob.
I've been trying to find the right rom for me and I installed cm10 with no problems.
After that, I tried cleanrom v1.1, but it would not boot.
Since then I cannot write or remove files from internal sdcard.
Can someone point me in the right direction to remedy this situation?
can you not remove from it when you are booted into the rom or when u r on PC ?
format it and do data reset, wipe cache in recovery, flash the rom afresh .
rraaka said:
can you not remove from it when you are booted into the rom or when u r on PC ?
format it and do data reset, wipe cache in recovery, flash the rom afresh .
Click to expand...
Click to collapse
I was unable to remove files when booted into the rom. I did not try from PC.
Formatting the internal sdcard did the trick. I wasn't sure if that would be destructive.
Thanks for your help.
formatting storage solves 60 percent of most of our small time problems, even for symptoms like rebooting / freezing etc
but keep a back up

[TPT] CM10 Cannot wipe cache

Hi everyone, I recently rooted my 16GB WE TPT and installed cm10 v.0.8.1 and I love the performance and everything, if only there were no reboots. After reading in this forum I wanted to try to reinstall things from scratch wiping everything. For some reason I don't seem to be able to to anything with the data that is on my TPT. Neither can I do a factory reset from settings nor can I wipe data from Recovery. It doesn't display an error but it just doesn't delete anything. Then I tried to restore my backup from my original rom but this doesn't work either: it says error while restoring data (after recovery and system).
Can anyone help me? Could I have accidentally locked the data or anything?
Btw, Google Play has stopped working after my last try to restore stock and then install cm10 again.
In cwm you find under advanced a setting called "fix permissions". Try that
emuandco said:
In cwm you find under advanced a setting called "fix permissions". Try that
Click to expand...
Click to collapse
Doesn't do anything.
idewis said:
Doesn't do anything.
Click to expand...
Click to collapse
Hi, i had big problems with my Data-Partition. The Partition was read-only. No wipe with CWM was possible. Is that the same problem what you have? Do you have an logcat? Any error-messages?
Wiping was only possible with adb...
Here is my post: http://forum.xda-developers.com/showthread.php?t=1944759
When it is the same problem, it exist an solution...
Greetings
tpauli said:
Hi, i had big problems with my Data-Partition. The Partition was read-only. No wipe with CWM was possible. Is that the same problem what you have? Do you have an logcat? Any error-messages?
Wiping was only possible with adb...
Here is my post: http://forum.xda-developers.com/showthread.php?t=1944759
When it is the same problem, it exist an solution...
Greetings
Click to expand...
Click to collapse
I don't have the same error messages you have/had, but I could image that my data partition is also read only since I can neither delete or install anything. What did you do to get rid of that problem?
The solution was to completely format the data permission. This can't be done in CWM directly because CWM tries to keep the folder /data/media, which is your internal sd-card and only deletes the other files (That's obviously not formating). In the link you can find a zip files that you can "flash" in CWM, it will format the data partition and does nothing else. After using it you should also manually wipe the cache using CWM.
Like i said, this will include your internal sdcard! Make backups first if you have important data stored on it!
http://ubuntuone.com/4zKT1jqeqhR8qdGh2y4TaM
I need to clear it - if I do "wipe data/factory reset" in stock ICS recovery menu - will it cause deleting ROM (and reboot will make brick) OR just will get it back to clean factory ROM?
I found few threads here about "wipe data"-thing, but it seems to me, that every version of Android / custom ROM / recovery type could behave different.

[HELP] I think I have bricked it.

Guys, I was about to flash a new rom (Omega v2 for i9500) then I wiped the whole thing in CWM. But in addition to that I have formatted the system (mounts and format > format system), now device won't boot. I can get in Download Mode and Recovery mode but it just won't boot...
Now I am downloading a stock ROM from SamMobile; would it fix it if i flash it via Odin? And any suggestions?
Please tell me something because I am feeling really bad =/.
holygeek said:
Guys, I was about to flash a new rom (Omega v2 for i9500) then I wiped the whole thing in CWM. But in addition to that I have formatted the system (mounts and format > format system), now device won't boot. I can get in Download Mode and Recovery mode but it just won't boot...
Now I am downloading a stock ROM from SamMobile; would it fix it if i flash it via Odin? And any suggestions?
Please tell me something because I am feeling really bad =/.
Click to expand...
Click to collapse
always do a backup via cwm for your rooted stock rom after rooting!
did you flash the rom after formatting system?
any way, Odin should fix it
samersh72 said:
always do a backup via cwm for your rooted stock rom after rooting!
did you flash the rom after formatting system?
any way, Odin should fix it
Click to expand...
Click to collapse
You are right =/ I should have done a backup.. Yea' I did flash the ROM after formatting system but won't boot.
holygeek said:
You are right =/ I should have done a backup.. Yea' I did flash the ROM after formatting system but won't boot.
Click to expand...
Click to collapse
wipe data and cache and dalvik, reflash the rom, rewipe data and cache and dalvik, reboot.
if not, you have odin.
samersh72 said:
wipe data and cache and dalvik, reflash the rom, rewipe data and cache and dalvik, reboot.
if not, you have odin.
Click to expand...
Click to collapse
Yes I have tried it many times. The downlaod is about to end now, I am so freaking nerveous right now, I hope it will fix it!..

Categories

Resources