Hello.
I write to you because I have a big problem with mi LG G2 D802.
Yesterday I tried to install a CRM apk to use in a signature of the University. I was using CM11, but the apk had failed. So, I restored my ROM STOCK backup and when the phone start, a new update was downloaded and installed. Then, the phone only enter in recovery mode. I tried the different wipes, restore again ROM Stock, install again CM11 ROM but the problem was not solved.
I tried to enter in bootleader (pushing vol+ and insert the usb cable), but the phone reboot in recovery.
Now, I don´t know why, the phone is empty. I tried to restore ROM Stock backup from USB OTG but the recovery don´t recognizes the folders.
Please, can anybody help me? I need the pone!
Thanks.
Regards,
Nicolas.
Hmm try to install a clean ROM using adb sideload... If that doesn't work then you might have to use kdz to flash to stock
have you tried this if it doesn't work you will need to go back to stock using kdz/tot method
TWRP 2.7.0.0 Loop
Thanks for your answers. Luckily I solved the problem with .zip archive downloaded on the web.
Now, you can close the thread.
Thanks!
Related
I have an issue with my phone
Installed this rom (http://forum.xda-developers.com/showthread.php?t=2537495). Everything was working but since I have installed a xposed module and rebooted, the ROM is always loading and never start (google loading image)
Before intalling the ROM, I had to install 4.3 modem through ODIN.
I also have TWRP installed.
The thing is now I'm unable to boot in TWRP, my phone only want to boot in ODIN menu
What I should do now ?
- Is there a way to force boot to TWRP in order to be able to reinstall the custom rom or my nandroid backup ?
- If not, my only chance is to install stock rom with ODIN ?
Please help me, I really dont know what to do right now
Thanks
nevermind , I was able to boot into recovery mode to reinstall the custom room
thread can be closed. thanks
While trying ti install CM 11 from TWRP i managed to brick the phone. I dont want to waste time sharing the details unless it's need to solve the problem. The main thing is that my phone is now stuck at the LG logo. Previously i was running the CM 10.2 Stable Build.
How can i get back to working condition? Either CM or Genuine LG Rom, I just want my phone to be up and running.
Please Help. I am really scared at this moment.
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
muEcke* said:
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
Click to expand...
Click to collapse
I can enter both the modes shown in the video.
The thing is i was running CM 10.2 with a TWRP installed of version 2.6.3.2. I downloaded the CM 11 and went into TWRp to flash it but it couldnt flash the CM11. Then after searching the net i found out that TWRP 2.6.3.3 or higher is required to install CM11. The problem is that i wiped my dalvic, data, cache and system and did not keep a backup. So when the Cm11 wont install i was stuck in the TWRP as i didn not have the 10.2 rom file in the phone.
Then downloaded the TWRP 2.6.3.3 and also a CWM zip (just in case). Using ADB i tried to update the TWRM but still some other error shows up. Tried installing the CWm still some error shows up. i tried installing again and this time the recovery asked me to install superuser (though i was rooted). I selected YES and after that i am boot looping in the lg logo.
Anyways thats basically what happened. Now how do i get further and make my phone work again?
Please help brother. I am in deep trouble.
Thank You
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
muEcke* said:
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
Click to expand...
Click to collapse
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
in_core said:
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
Click to expand...
Click to collapse
So you can't enter the recovery like shown in the video? And the command adb reboot recovery doesn't work either?
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
hellot1M said:
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Ok then i will follow this process and hopefully be successful in getting my phone up and running.
Thanks for the help. Downloading 2Gb will take some time. So will post the result tomorrow.
Regarding rooting and installing custom recovery again, i will do that later. For now i just want my phone alive.
Anyways Thanks again everyone for the helpful information
Try getting to download mode right now. Because if you can't get to download mode you can't use the back to stock method
from my Note Thrizzle
Thanks everyone for the help and support. I have successfully reverted back to Stock LG Firmware.
I have some questions.
1. Do i have root access anymore?
2. Is my previous custom recovery still in my system?
3. If no for both then please help me with the appropriate article to root, install custom recovery and then install CM11, as my previous recovery was not able to install CM 11.
Thank You
Yesterday, I installed Cloudyfa LG G3 port but when i tested it out,I still prefer stock rom so i decided to revert back to stock using LG Flash Tool.
When I restore using flashtool, it skipped most of the partition and went to boot to recovery. In my recovery,it say Error mounting /data .
Now i am stuck in a bootloop,i still can get to download mode and recovery mode. Anyone has a fix for it?
Thanks in advance
davidang said:
Yesterday, I installed Cloudyfa LG G3 port but when i tested it out,I still prefer stock rom so i decided to revert back to stock using LG Flash Tool.
When I restore using flashtool, it skipped most of the partition and went to boot to recovery. In my recovery,it say Error mounting /data .
Now i am stuck in a bootloop,i still can get to download mode and recovery mode. Anyone has a fix for it?
Thanks in advance
Click to expand...
Click to collapse
Did you do a wipe in recovery before installing the .kdz?
I was trying to restore stock rom via TWRP but it is still rebooting into TWRP and asking me to install TWRP app. I clicked on Do not install but its still rebooting into TWRP! Please help!
How are you attempting to restore stock ROM via TWRP?
The stock ROM zip file is not a TWRP flashable file, it must be copied to a computer, extracted and flashed using fastboot.
Aditya potdar said:
I was trying to restore stock rom via TWRP but it is still rebooting into TWRP and asking me to install TWRP app. I clicked on Do not install but its still rebooting into TWRP! Please help!
Click to expand...
Click to collapse
You can't flash stock ROM in TWRP. You need to extract it and flash it via fastboot. Google it if you need help with this
Okay guys thanks for your help
Hey guys,
so I tried flashing Omni 8.0 rom and I was stuck at the boot screen. so I went back into twrp tried to reflash still nothing. I flashed a new version of twrp the one that can use multirom and it erased all my data. I flashed back the twrp I started with and now I can not sideload the full OTA zip to get back to stock. It says "cannot load one.zip" which is what I have it labeled as. I tried to download the recovery tool and I can't seem to figure out how to get the driver to work so it will see me on my comm port. Does anyone have any ideas on what to do or what happened? I'm stuck in twrp.
almost looks like it can't mount the system
IDK, maybe a broken download. I'd try to restore a backup if you have one, if not Wipe > Factory Reset. If it still doesn't boot after 20 minutes, refer to this thread: https://forums.oneplus.net/threads/i-have-to-go-back-to-oxygen-os.649947/#post-16907420. Basically, download the OOS ROM onto your computer and use an ADB/USB Sideload in TWRP recovery (you can flash Oxygen Recovery from TWRP if TWRP doesn't work) to install it. May take a while to boot.
I have no idea how it happened but I got my system mounted again that was my problem. I'm back.
thread can be closed
keeganjk said:
IDK, maybe a broken download. I'd try to restore a backup if you have one, if not Wipe > Factory Reset. If it still doesn't boot after 20 minutes, refer to this thread: https://forums.oneplus.net/threads/i-have-to-go-back-to-oxygen-os.649947/#post-16907420. Basically, download the OOS ROM onto your computer and use an ADB/USB Sideload in TWRP recovery (you can flash Oxygen Recovery from TWRP if TWRP doesn't work) to install it. May take a while to boot.
Click to expand...
Click to collapse
thanks for the reply mate
snipeez1987 said:
thanks for the reply mate
Click to expand...
Click to collapse
yw
snipeez1987 said:
Hey guys,
so I tried flashing Omni 8.0 rom and I was stuck at the boot screen. so I went back into twrp tried to reflash still nothing. I flashed a new version of twrp the one that can use multirom and it erased all my data. I flashed back the twrp I started with and now I can not sideload the full OTA zip to get back to stock. It says "cannot load one.zip" which is what I have it labeled as. I tried to download the recovery tool and I can't seem to figure out how to get the driver to work so it will see me on my comm port. Does anyone have any ideas on what to do or what happened? I'm stuck in twrp.
Click to expand...
Click to collapse
Easy fix for "Cannot load xxx.rom": you have to patch the adb.exe with a large address awareness program. Google it, I found one in another XDA thread.
Reason: the ROM filesize is too large. For small ROMs (like custom ROMs) adb would recognise it without any problems.
ipredatorv said:
Easy fix for "Cannot load xxx.rom": you have to patch the adb.exe with a large address awareness program. Google it, I found one in another XDA thread.
Reason: the ROM filesize is too large. For small ROMs (like custom ROMs) adb would recognise it without any problems.
Click to expand...
Click to collapse
Awesome. I'll keep that in mind. I'm sure I'll mess it up again lol. Hopefully not though.