Help!!! - G2 Q&A, Help & Troubleshooting

Yesterday, I installed Cloudyfa LG G3 port but when i tested it out,I still prefer stock rom so i decided to revert back to stock using LG Flash Tool.
When I restore using flashtool, it skipped most of the partition and went to boot to recovery. In my recovery,it say Error mounting /data .
Now i am stuck in a bootloop,i still can get to download mode and recovery mode. Anyone has a fix for it?
Thanks in advance

davidang said:
Yesterday, I installed Cloudyfa LG G3 port but when i tested it out,I still prefer stock rom so i decided to revert back to stock using LG Flash Tool.
When I restore using flashtool, it skipped most of the partition and went to boot to recovery. In my recovery,it say Error mounting /data .
Now i am stuck in a bootloop,i still can get to download mode and recovery mode. Anyone has a fix for it?
Thanks in advance
Click to expand...
Click to collapse
Did you do a wipe in recovery before installing the .kdz?

Related

D802 Bricked. Please Help

While trying ti install CM 11 from TWRP i managed to brick the phone. I dont want to waste time sharing the details unless it's need to solve the problem. The main thing is that my phone is now stuck at the LG logo. Previously i was running the CM 10.2 Stable Build.
How can i get back to working condition? Either CM or Genuine LG Rom, I just want my phone to be up and running.
Please Help. I am really scared at this moment.
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
muEcke* said:
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
Click to expand...
Click to collapse
I can enter both the modes shown in the video.
The thing is i was running CM 10.2 with a TWRP installed of version 2.6.3.2. I downloaded the CM 11 and went into TWRp to flash it but it couldnt flash the CM11. Then after searching the net i found out that TWRP 2.6.3.3 or higher is required to install CM11. The problem is that i wiped my dalvic, data, cache and system and did not keep a backup. So when the Cm11 wont install i was stuck in the TWRP as i didn not have the 10.2 rom file in the phone.
Then downloaded the TWRP 2.6.3.3 and also a CWM zip (just in case). Using ADB i tried to update the TWRM but still some other error shows up. Tried installing the CWm still some error shows up. i tried installing again and this time the recovery asked me to install superuser (though i was rooted). I selected YES and after that i am boot looping in the lg logo.
Anyways thats basically what happened. Now how do i get further and make my phone work again?
Please help brother. I am in deep trouble.
Thank You
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
muEcke* said:
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
Click to expand...
Click to collapse
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
in_core said:
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
Click to expand...
Click to collapse
So you can't enter the recovery like shown in the video? And the command adb reboot recovery doesn't work either?
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
hellot1M said:
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Ok then i will follow this process and hopefully be successful in getting my phone up and running.
Thanks for the help. Downloading 2Gb will take some time. So will post the result tomorrow.
Regarding rooting and installing custom recovery again, i will do that later. For now i just want my phone alive.
Anyways Thanks again everyone for the helpful information
Try getting to download mode right now. Because if you can't get to download mode you can't use the back to stock method
from my Note Thrizzle
Thanks everyone for the help and support. I have successfully reverted back to Stock LG Firmware.
I have some questions.
1. Do i have root access anymore?
2. Is my previous custom recovery still in my system?
3. If no for both then please help me with the appropriate article to root, install custom recovery and then install CM11, as my previous recovery was not able to install CM 11.
Thank You

[Q] LG g2 802 bootloop after full wipe

So i was with the stock kitkat 4.4.2 rooted rom, after installing a recovery i wanted to install cloudyflex 2.0, i successifully did, rebooted the device everything worked fine, so i went back to the recovery and decided to full wipe everything.... it seemed to work fine, except that when i pressed on reboot the system i got warned that superSU was not installed... that scared me out, and now im f**cked because of the bootloop... i cant turn on the phone.. what to do?
If you still can boot in download mode, just kdz it back to stock, 4.2.2 then root, flash recovery (Phiz for example), then flash any rom you want.
phuongtv88 said:
If you still can boot in download mode, just kdz it back to stock, 4.2.2 then root, flash recovery (Phiz for example), then flash any rom you want.
Click to expand...
Click to collapse
and how?? my computer doesnt run the lg mobile support tool...

[Q] [RECOVERY] TWRP 2.7.0.0 Loop

Hello.
I write to you because I have a big problem with mi LG G2 D802.
Yesterday I tried to install a CRM apk to use in a signature of the University. I was using CM11, but the apk had failed. So, I restored my ROM STOCK backup and when the phone start, a new update was downloaded and installed. Then, the phone only enter in recovery mode. I tried the different wipes, restore again ROM Stock, install again CM11 ROM but the problem was not solved.
I tried to enter in bootleader (pushing vol+ and insert the usb cable), but the phone reboot in recovery.
Now, I don´t know why, the phone is empty. I tried to restore ROM Stock backup from USB OTG but the recovery don´t recognizes the folders.
Please, can anybody help me? I need the pone!
Thanks.
Regards,
Nicolas.
Hmm try to install a clean ROM using adb sideload... If that doesn't work then you might have to use kdz to flash to stock
have you tried this if it doesn't work you will need to go back to stock using kdz/tot method
TWRP 2.7.0.0 Loop
Thanks for your answers. Luckily I solved the problem with .zip archive downloaded on the web.
Now, you can close the thread.
Thanks!

[Q] Oh Boy... Please help my dumb ass!

I made a mistake and could use your help...
I have a Verizon LG G2 it is rooted and I tried to install clockworkmod recovery and it wouldn't boot to recovery just the stock recovery. So.. I installed TWRP and flashed that recovery. Now I have no recovery. Phone locks up when I try to boot into recovery. How do I fix this? I am trying to ditch the stock Rom. Whats the easiest solution to flash over everything with a new Rom without using recovery? Or how do I get a Recovery working.. I never used a PC to flash before... I am a computer geek tho so with some guidance I should be able to hopefully fix this.
225719 said:
I made a mistake and could use your help...
I have a Verizon LG G2 it is rooted and I tried to install clockworkmod recovery and it wouldn't boot to recovery just the stock recovery. So.. I installed TWRP and flashed that recovery. Now I have no recovery. Phone locks up when I try to boot into recovery. How do I fix this? I am trying to ditch the stock Rom. Whats the easiest solution to flash over everything with a new Rom without using recovery? Or how do I get a Recovery working.. I never used a PC to flash before... I am a computer geek tho so with some guidance I should be able to hopefully fix this.
Click to expand...
Click to collapse
autorec
http://forum.xda-developers.com/showthread.php?t=2715496

[Q] [Help] LG G2 stuck on Recovery Mode.

Hello everyone and I apologize if there's been a solution to this before but I couldn't find it.
I was on Rooted stock V20F, and there was a new OTA update from LG (around 110 MBs). Before installing anything i made a backup from TWRP Recovery just in case anything went bad.
So after I download the official update, the phone reboots, and boots into TWRP recovery. From that moment, I can't get the phone to boot properly no matter what I do.
I tried restoring my backup, the phone will still boot into TWRP. Tried Factory Reset, Format Data, installing a new custom rom and nothing. It always brings me back to TWRP.
Also when i try to get into download mode so I can flash a KDZ file with flash tool, it boots into TWRP again.
Any ideas? Thanks a lot in advance.
edit: I actually found the solution here (it wasn't in the troubleshoot section and I didn't notice it..): http://forum.xda-developers.com/showthread.php?t=2451696
Is there any way to install official OTA updates without the phone freaking out?

Categories

Resources