the allshare cast dongle was working very well on my note n8000 running JB 4.1.2 and once while i connected the dongle, asked for update the dongle on the notification bar and after update the dongle no more connected inspite the note read and find it but after connected telling me the (curreent allshare cast will ended)..i format the note, i tried another rom, i did every thing but lastly tell me (current allshare cast dongle will end cause of hardware issue).please what can i do
drbasemsieda said:
the allshare cast dongle was working very well on my note n8000 running JB 4.1.2 and once while i connected the dongle, asked for update the dongle on the notification bar and after update the dongle no more connected inspite the note read and find it but after connected telling me the (curreent allshare cast will ended)..i format the note, i tried another rom, i did every thing but lastly tell me (current allshare cast dongle will end cause of hardware issue).please what can i do
Click to expand...
Click to collapse
Exact same thing happening to me now. Did you get it sorted?
Make sure your on stock kernel, if that isnt it then i dont know what to tell you.
Good Luck!!
I had a similar issue with wireless display sharing. I found a thread that recommended using Triangle Away - https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway which got me back up and running.
I'm on stock. Had the same problem but there is a patch in the play store. I think it is called "screenmirroringpatch".
Related
i know N4 is miracast certified, and pTV3000 is a miracast receiver
does anyone know if someone has actually made this connection happen (demo units etc..)
Thanks!
Miracast receiver -> miracast certified.
Yes, wheels do go on cars.
Android central wrote in N4 review that they didn't get it to work with Netgear Push2TV. I have no idea if it was PTV3000 or some earlier model.
It does not work with the Netgear PTV3000 (Probably because it is only pre-standards compliant).
Netgear is claiming they have an update coming out though to fix it though.
MatAuc12 said:
Miracast receiver -> miracast certified.
Yes, wheels do go on cars.
Click to expand...
Click to collapse
haha too bad your jackass smart reply doesn't hold, since the other 2 members nicely pointed out that yes, it does NOT work
some wheels don't go on some cars, take care
Anyone know of any Miracast receivers that do work with the Nexus 4?
Don't feel like getting buying the $30 Slimport HDMI cable, would rather just put that money towards a Miracast box of some kind.
FISKER_Q said:
It does not work with the Netgear PTV3000 (Probably because it is only pre-standards compliant).
Netgear is claiming they have an update coming out though to fix it though.
Click to expand...
Click to collapse
Thanks for your update. I just get Netgear PTV3000's V2.1.1 firmware update from Netgear Forum. I am not sure whether it can make your Nexus 4 get supported.
forum1.netgear.com/showthread.php?t=80000
kesunji said:
Thanks for your update. I just get Netgear PTV3000's V2.1.1 firmware update from Netgear Forum. I am not sure whether it can make your Nexus 4 get supported.
forum1.netgear.com/showthread.php?t=80000
Click to expand...
Click to collapse
I just tried this update, my shipped firmware was 1.0.2 Went fine, but N4 still cannot connect. Phone sees the adapter, but when you tap on it to connect, says "Connecting" and never connects.
Someone know when will be firmware update for PTV3000 to support Miracast?
leobg said:
I just tried this update, my shipped firmware was 1.0.2 Went fine, but N4 still cannot connect. Phone sees the adapter, but when you tap on it to connect, says "Connecting" and never connects.
Click to expand...
Click to collapse
Try these firmwares.
MD5 (PTV3K_V2.1.4.sbin) = b7a3c5e729ee96dd887b211d2724ef1e
MD5 (PTV3K_V2.1.5.sbin) = 7c1e89b983ad6ea058622e055d75045e
cj64 said:
Try these firmwares.
MD5 (PTV3K_V2.1.4.sbin) = b7a3c5e729ee96dd887b211d2724ef1e
MD5 (PTV3K_V2.1.5.sbin) = 7c1e89b983ad6ea058622e055d75045e
Click to expand...
Click to collapse
Progress! 2.1.4 almost connected - ended up with HDCP authentication error. 2.1.5 works. But there is a lot to be desired! There is noticeable lag between what happens on screen and on the TV - maybe around 0.5 seconds and it gets worse if you are more than couple of meters away from the receiver. There are often artifacts showing up, video works but is choppy, audio goes out of sync (audio also plays on the TV).
But good to show pictures and slideshows on TV wireless. But not really HDMI cable replacement. Battery consumption (on phone) is considerable too. Battery shattered down by 20% down in under 10 minutes.
leobg said:
Progress! 2.1.4 almost connected - ended up with HDCP authentication error. 2.1.5 works. But there is a lot to be desired! There is noticeable lag between what happens on screen and on the TV - maybe around 0.5 seconds and it gets worse if you are more than couple of meters away from the receiver. There are often artifacts showing up, video works but is choppy, audio goes out of sync (audio also plays on the TV).
But good to show pictures and slideshows on TV wireless. But not really HDMI cable replacement. Battery consumption (on phone) is considerable too. Battery shattered down by 20% down in under 10 minutes.
Click to expand...
Click to collapse
Thanks for posting these. I tried 2.1.5 first, but it had the HDCP authentication error.
2.1.4 works though! However video is constantly choppy and occasionally blocky.
2.1.5 Killed WiDi
2.1.1
Finds the Push2TV adapter, but cannot connect. Nexus 4 can find the Push2TV adapter but cannot connect either.
2.1.4
WiDi fails to connect and HDCP authentication fails for Miracast.
2.1.5
WiDi doesn't connect but Miracast works pretty well. Video and audio is a little choppy though.
For now using stock is best for WiDi and 2.1.5 is the best for Miracast. Anyone else have any news or new firmwares?
Has there been any progress with this?
Sent from my Nexus 4 using xda app-developers app
rupes0610 said:
Anyone else have any news or new firmwares?
Click to expand...
Click to collapse
My Verizon Samsung Galaxy S3 was able to revert my PTV3K's firmware back to version 1.0.13 from version 2.1.5. If you need to revert back to stock, that is an option.
(edit) After it received the Jelly Bean update, it shows this screen upon connecting:
Hitting "OK" will flash the 1.0.13 firmware to the PTV3K.
This is how I get it to work consistently without the HDCP error..
Make sure the monitor is off before plugging in the usb cable to the PTV. So each time you turn off your monitor, you also need to unplug your PTV.
How do I flash the firmware to the ptv3000?
indianl said:
How do I flash the firmware to the ptv3000?
Click to expand...
Click to collapse
From PTV3000 guide:
9. How can I update my Push2TV?
a. Use your computer and navigate to http://www.netgear.com/stream to check
for and download the latest firmware.
b. Press the Wireless Display Mode / WPS button on the side of the
Push2TV unit for more than 5 seconds.
c. Using the wireless network manager utility on your computer, search for the
Push2TV wireless network name (SSID) and connect.
d. Open a browser on your computer, and you are automatically redirected to
the Push2TV update page. If you are not automatically redirected, type
http://192.168.3.1/ into the browser address bar.
e. Follow the steps on the web page to upload the firmware image you
downloaded in step a and complete the installation.
Click to expand...
Click to collapse
rupes0610 said:
2.1.1
Finds the Push2TV adapter, but cannot connect. Nexus 4 can find the Push2TV adapter but cannot connect either.
2.1.4
WiDi fails to connect and HDCP authentication fails for Miracast.
2.1.5
WiDi doesn't connect but Miracast works pretty well. Video and audio is a little choppy though.
For now using stock is best for WiDi and 2.1.5 is the best for Miracast. Anyone else have any news or new firmwares?
Click to expand...
Click to collapse
There is a 2.2.2 firmware floating around for the PTV3000. I can't comment on the Nexus 4 specifically, but it does work with the Galaxy S3 and the AllShare Cast app on it. I have had great performance with it, especially compared to the 2.1.5 that was just absolutely horrible. I would be interested to know what someone with a Nexus 4 and the 2.2.2 experienced as well.
Also, in the 2.2.2 update, it looks as tho the button on the side for switching between WiDi and Miracast isn't used for switching modes anymore and the device is always "listening" for both types of connections. The screen doesn't reference WiDi or Miracast now, just basically says"connect your device".
Thanks
detredwinger85 said:
There is a 2.2.2 firmware floating around for the PTV3000. I can't comment on the Nexus 4 specifically, but it does work with the Galaxy S3 and the AllShare Cast app on it. I have had great performance with it, especially compared to the 2.1.5 that was just absolutely horrible. I would be interested to know what someone with a Nexus 4 and the 2.2.2 experienced as well.
Also, in the 2.2.2 update, it looks as tho the button on the side for switching between WiDi and Miracast isn't used for switching modes anymore and the device is always "listening" for both types of connections. The screen doesn't reference WiDi or Miracast now, just basically says"connect your device".
Thanks
Click to expand...
Click to collapse
Do you have the link for 2.2.2 handy?
Google is our friend
Link: http://www.droid-life.com/2012/12/28/video-hands-on-with-nexus-4-miracast-and-the-netgear-ptv3000/
Hey guys!
Iam curious on how to use screen mirroring to play games on my LG smart tv
Do i have to buy this?
http://www.amazon.co.uk/Samsung-Wi-...-2&keywords=Samsung+WI-FI+All-Share+Cast+Hub,
Or this?
http://www.amazon.co.uk/Samsung-WIS...-1&keywords=Samsung+WI-FI+All-Share+Cast+Hub,
Or something else, or is there another way to do it wirelessly without having to buy acessories?
Thanks in advance
alundra212 said:
Hey guys!
Iam curious on how to use screen mirroring with my smart tv
Do i have to buy this?
http://www.amazon.co.uk/Samsung-Wi-...-2&keywords=Samsung+WI-FI+All-Share+Cast+Hub,
Or this?
http://www.amazon.co.uk/Samsung-WIS...-1&keywords=Samsung+WI-FI+All-Share+Cast+Hub,
Or something else, or is there another way to do it wirelessly without having to buy acessories?
Thanks in advance
Click to expand...
Click to collapse
I have one of these - Samsung Wi-Fi Display Hub for Galaxy S2/S3/S4/Note 2 - Black . Works well but I did find you need "Official" statuses in both bootloader and settings to work with my Note 10.1. Haven't tried with my S4... This is for total screen mirrorring. It shows everything I do on my tablet on screen...
The DLNA sharing is only for movies, music and pictures...
I have a Samsung TV and the DLNA works well...
My advice, look at the reviews and buy the cheapest if the TV you have doesn't support DLNA... I'd check that 1st...
ultramag69 said:
I have one of these - Samsung Wi-Fi Display Hub for Galaxy S2/S3/S4/Note 2 - Black . Works well but I did find you need "Official" statuses in both bootloader and settings to work with my Note 10.1. Haven't tried with my S4...
I have a Samsung TV and the DLNA works well...
My advice, look at the reviews and buy the cheapest if the TV you have doesn't support DLNA... I'd check that 1st...
Click to expand...
Click to collapse
My tv supports DLNA but I'm only interested on screen mirroring.
So that means even if I but the hub it won't work for me because I using omega rom?
alundra212 said:
My tv supports DLNA but I'm only interested on screen mirroring.
So that means even if I but the hub it won't work for me because I using omega rom?
Click to expand...
Click to collapse
Probably not though I have read in the note 10.1 forum of it working. Not to my experience however. I use a rooted stock rom on my SG Note 10.1 I have flashed using Mobile ODIN. I run triangle away 1st and get all Status's "Official" with 0 flash count but when I tried flashing other roms it went ass up... You might be able to try the workaround on triangle away but that requires the paid app...
ultramag69 said:
Probably not though I have read in the note 10.1 forum of it working. Not to my experience however. I use a rooted stock rom on my SG Note 10.1 I have flashed using Mobile ODIN. I run triangle away 1st and get all Status's "Official" with 0 flash count but when I tried flashing other roms it went ass up... You might be able to try the workaround on triangle away but that requires the paid app...
Click to expand...
Click to collapse
Thanks. I can buy the app, that's no problem.
So all I need to get for screen mirroring is the hub not the dongle right?
Yep, the hub mirrors everything but the dongle actually says its a DLNA dongle...
screen mirroring
Purchase the allshare dongle, plug in to available hdmi slot, turn on your screen mirroring on your phone, dongle should be recognized...If you get error msg that cannot connect or find the dongle, make sure you have the latest firmware update for the allshare dongle
Was just curious if anyone found a fix for screen mirroring my phone is rooted I noticed there is work arounds for other devices does anyone know of one for the VZW Note 3?
Bump
Sent from my SM-N900V using Tapatalk
Screen mirroring how?
I'm rooted and safestrapped and running on beans ROM and mirror works fine thru MHL adapter... typing this out on my flatscreen with bluetooth mouse and keyboard as we speak... just got done playing GTA with sixaxis PS3 controller and all that mirrored well also. (Eats battery like crazy though)
I am talking about thru my samsung all share cast hub you press screen mirroring and it does not connect there is a fix for the note tablet 2014 and other samsung devices but i do not think there is one for this one.
Here is a example of what I am talking about
http://forum.xda-developers.com/showthread.php?t=2421642
I've been looking if there was a way to get the mirroring to function with any rendering device... I have multiple htpcs in my house all with xbmc, I can send video music whatever to it being xbmc broadcasts the pc on the network as a dmr device, but the stock mirroring on the phone doesn't recognize it
Did you find a solution yet? I've been trying to do it with the Fire TV stick. It finds it, says it's connecting but won't connect.
Hello,
Yesterday i got android update to 4.4.2
But now my, connexion via screen mirroring with thesamsung allshare cast dongle is impossible.
Error message : Impossible to connect via screen mirroring.
Thank you for your help
i have the same problem. after the n9005xxuenb4 update
Since 4.4.2 I had two issues:-
1) It would try to connect and then just give up. To fix this I held the Dongle-12345 link down until it says "Connect with pin". This allowed me to connect but lead to problem 2
2) All I got was a blank screen. it seems to make the AllShare Cast Hub go into 1080p/30 !! This is an unusual (but valid) mode that not all TVs support. On my Panasonic TV I get a blank screen but on another TV it works. It seems to totally disregard the TV capability with LF21 or LJ02 firmware and I cannot try anything newer because the firmware updater has been withdrawn by Samsung
Not very impressed!
Hi All,
I am having hell of a time with my new All Share Cast Dongle.
It plugs in etc... and turns on, but on the S5, it says a "A Screen Mirroring update has been downloaded. Restart Screen Mirroring to update".
Nothing I do can it to work, I have unnstalled all allshare cast related items, restarted. eberything except a factory reset. the Screen mirroring simply DOES NOT WORK!!!
THanks!
penguinpoo said:
Hi All,
I am having hell of a time with my new All Share Cast Dongle.
It plugs in etc... and turns on, but on the S5, it says a "A Screen Mirroring update has been downloaded. Restart Screen Mirroring to update".
Nothing I do can it to work, I have unnstalled all allshare cast related items, restarted. eberything except a factory reset. the Screen mirroring simply DOES NOT WORK!!!
THanks!
Click to expand...
Click to collapse
Same issue.
Kaczman said:
Same issue.
Click to expand...
Click to collapse
Did you flash with the latest firmware? I did, just wondering if it s an issue with the latest. ...
For the record
Hi All,
Just for those googlers who come across this.
I managed to solve it.
For some (what ever?) reason it didnt work when connecting to my HDMI monitor. So when I got home I connected the dongle to my TV and it came up on the screen with the colourful dongle welcome page saying 'Please connect a device'.
I started the screen mirroring app on the phone (settings > Screen Mirroring > On, selected dongle).
Then the phone uploaded a new firmware to the dongle which took a minute or two. Once this happend the dongle restarted and all was OK.
When connected to the monitor at the office, the dongle firmware update got to 27% (on the phone display - there was nothing on my monitor), then it stopped.
So, Connect to a TV. Start screen mirroring and let it update the dongle. Works GREAT!
penguinpoo said:
Hi All,
Just for those googlers who come across this.
I managed to solve it.
For some (what ever?) reason it didnt work when connecting to my HDMI monitor. So when I got home I connected the dongle to my TV and it came up on the screen with the colourful dongle welcome page saying 'Please connect a device'.
I started the screen mirroring app on the phone (settings > Screen Mirroring > On, selected dongle).
Then the phone uploaded a new firmware to the dongle which took a minute or two. Once this happend the dongle restarted and all was OK.
When connected to the monitor at the office, the dongle firmware update got to 27% (on the phone display - there was nothing on my monitor), then it stopped.
So, Connect to a TV. Start screen mirroring and let it update the dongle. Works GREAT!
Click to expand...
Click to collapse
So wait. You say you need to connect the dongle to a TV, and then use it first?
Kaczman said:
So wait. You say you need to connect the dongle to a TV, and then use it first?
Click to expand...
Click to collapse
I have it connected to my TV but I only get the same message to turn off screen mirroring. Is anyone trying this rooted or stock?
OK, I had to first force stop the allshare cast SW download then uninstall it. I was then able to connect to the dongle and it downloaded the software again. All is good now. I also found out that it will not work with certain custom kernels, so please ensure that you are using stock kernel or it will not connect to the dongle.
Ramondel said:
I have it connected to my TV but I only get the same message to turn off screen mirroring. Is anyone trying this rooted or stock?
OK, I had to first force stop the allshare cast SW download then uninstall it. I was then able to connect to the dongle and it downloaded the software again. All is good now. I also found out that it will not work with certain custom kernels, so please ensure that you are using stock kernel or it will not connect to the dongle.
Click to expand...
Click to collapse
Well that defeats purpose for me. I need a kernel that allows SELinux to be permissive so it can send bluetooth commands to appradio.
Kaczman said:
Well that defeats purpose for me. I need a kernel that allows SELinux to be permissive so it can send bluetooth commands to appradio.
Click to expand...
Click to collapse
Let me check with another custom kernel to make sure that it was not just the one that I had at the time. I will let you know later on tonight. What ROM are you running and what software version?
Ramondel said:
Let me check with another custom kernel to make sure that it was not just the one that I had at the time. I will let you know later on tonight. What ROM are you running and what software version?
Click to expand...
Click to collapse
Thanks. I am currently running Project infinity, but have tried stock, and Alliance rom. All with 0 success =(
hi guys,can you advice me to buy this dongle???How does it work about speed???Could i see 1080p mkv without lag with this item?Tnks!!!!!!
Kernel
Ramondel said:
Let me check with another custom kernel to make sure that it was not just the one that I had at the time. I will let you know later on tonight. What ROM are you running and what software version?
Click to expand...
Click to collapse
Did anyone find a Kernel to run with stock firmware which allows SELinux to be permissive?
djpeterdj said:
Did anyone find a Kernel to run with stock firmware which allows SELinux to be permissive?
Click to expand...
Click to collapse
Take a look here: http://forum.xda-developers.com/showthread.php?t=2621550&page=26
Im running DIAMOND rom v8 and AGNI kernel, and did triangle away, etc , but it doesnt work, it appears the same message on the phone:
"A screen Mirroring update has been downloaded, restart screen mirroring"
penguinpoo said:
Hi All,
I am having hell of a time with my new All Share Cast Dongle.
It plugs in etc... and turns on, but on the S5, it says a "A Screen Mirroring update has been downloaded. Restart Screen Mirroring to update".
Nothing I do can it to work, I have unnstalled all allshare cast related items, restarted. eberything except a factory reset. the Screen mirroring simply DOES NOT WORK!!!
THanks!
Click to expand...
Click to collapse
I'm currently having the same problems on my GT-N5100 (note 8.0)