Lost Data connections in Flex v1.5 - G2 Q&A, Help & Troubleshooting

I recently installed Flex v1.5 on my LG G2 (Claro PR-D801) and seemed to lost all of Data Connection. I tried the 3845 and #*#*# Methods but nothing seems to kick it back in. Any suggestions?
#Got everything fixed. Man this website loses me so much Dx, can't even find a way to delete my own thread.

NBTheKing said:
I recently installed Flex v1.5 on my LG G2 (Claro PR-D801) and seemed to lost all of Data Connection. I tried the 3845 and #*#*# Methods but nothing seems to kick it back in. Any suggestions?
#Got everything fixed. Man this website loses me so much Dx, can't even find a way to delete my own thread.
Click to expand...
Click to collapse
how did you get it solved? PLEASE POST IT

PopaStefanx said:
how did you get it solved? PLEASE POST IT
Click to expand...
Click to collapse
I used the Claro PR APN. By going to Settings > Tethering & networks > Mobile networks > Access point names > The Three Horizontal Bars button, New APN
Claro PR APN's can be found here:
http://forum.xda-developers.com/showthread.php?t=2229220

Related

Wind Mobile MMS Settings

I've tried various APN settings in an attempt to get MMS working on Wind Mobile, but have had no luck.
Anyone have confirmed working settings for Wind?
Is Auto Internet setting working in your phone? My unit came with grayed out Auto Internet setting, so I flash the firmware to UK Generic, and that fixed it...
roaringhere said:
Is Auto Internet setting working in your phone? My unit came with grayed out Auto Internet setting, so I flash the firmware to UK Generic, and that fixed it...
Click to expand...
Click to collapse
No, says its not available with my sim.
The first comment on this Wind Mobile community board thread has both data & MMS settings. They're talking about the N1 but the X10 if not the same should be close enough to be able to figure out where the settings go.
http://www.windmobile.ca/community/ideas/detail/20860/
Tried it. Still no go.
Have you contacted Wind? I am sure someone there will reach out and help you! Or contact Mcanns he seems to have an inside line there..
instigator008 said:
I've tried various APN settings in an attempt to get MMS working on Wind Mobile, but have had no luck.
Anyone have confirmed working settings for Wind?
Click to expand...
Click to collapse
Dude same here! I got an unlocked g2 and data works fine but not mms.
I tried so many different variations of settings floating around and even wind couldn't fix it for me.
Don't know what to do now. Maybe gonna go into a store...

Bell atrix can no longer connect to bell network

Hi guys,
So I flashed, rooted and installed GreyBlur on mu Bell atrix, by following instructions from "seven2099"
It installed great and I have noticed a HUGE improvement in speed and other things.
Only problem, is now I can't connect to any bell networks for my 3G.
WiFi works fine. I am only posting in here, because I am not aloud to post in the developers section, so I am hoping this message can either find its way to "seven2099", or someone in here might know whats up.
Thanks in advance!
If you can do everything except connect to the Internet via 3G then you need to add your APN settings back in:
http://androidforums.com/827267-post4.html
Don't forget to "Save" (menu button/save) after you type all that in...
ccrows said:
If you can do everything except connect to the Internet via 3G then you need to add your APN settings back in:
http://androidforums.com/827267-post4.html
Don't forget to "Save" (menu button/save) after you type all that in...
Click to expand...
Click to collapse
Good but for one thing: Do NOT fill in APN Type. In the linked post it says 'Internet + mms'. I could not get a connection when I had that filled in, as soon as I set APN Type back to undefined it worked right away.
Just sayin'
excellent!
all worked out great!
thanks alot guys!
Bell Atrix always Roaming after 2.1.1
HI all
I spent two days trying to get to the bottom of this..
I installed 2.1.1 on Bell Atrix.. the first things I noticed the little (r) near the signal, checked the system info and it say ROAMING, my Data does not work unless I put Data Roaming on..
I am with Fido, and of course FIDO cannot tell me if really I am paying Roaming charges until the bill date which is 20 days away..
has anyone experienced that problem and has an explanation of some sort? Am I really Roaming or becuase its FR SBF the phone is reporting Roaming??
this is very disturbing and puzzeling as well.. any thoughts is really appreciated.

[SOLVED] No 3g after ICS

9020T with stock ICS -flashed yesterday.
But 3g doesnt work anymore??
Any ideas?
Same problem here. Based on my monitoring of the phone status, it doesn't connect to the 3G networks anymore just EDGE and UMTS.
I don't even know what it's supposed to look like on ICS when the network is 3G or if there' a live data connection. I think the network signal bars are supposed to turn blue. But they don't without wifi.
Upgraded to 4.0.3 from stock 2.3.6 on i9023.
jpacs2007 said:
Same problem here. Based on my monitoring of the phone status, it doesn't connect to the 3G networks anymore just EDGE and UMTS.
I don't even know what it's supposed to look like on ICS when the network is 3G or if there' a live data connection. I think the network signal bars are supposed to turn blue. But they don't without wifi.
Upgraded to 4.0.3 from stock 2.3.6 on i9023.
Click to expand...
Click to collapse
I also upgraded from stock 2.3.6 on i9020T
Everything else is working great except for 3g..
I use a program called notification toggle to move from wifi to 3g and it just crashes if I press 3g.
I go into data settings instead and everything looks fine ...data is enabled etc.. but 3g icon never appears in the signal bars ,so cannot connect.
Anyone know how to fix this?
Anyone ?
I Need help getting the 3g working or will have to try and go back to 2.3.6
I had the same problem after going to ics from 2.3.4 and then to 2.3.6. go to network settings and just refresh or delete and renew the settings. it will scan and take like ten minutes. it will find tmo and att. pick tmo and you should see the mobile network work now. did for me. 3g and edge and all
Sent from my Nexus S using xda premium
kramer987 said:
I had the same problem after going to ics from 2.3.4 and then to 2.3.6. go to network settings and just refresh or delete and renew the settings. it will scan and take like ten minutes. it will find tmo and att. pick tmo and you should see the mobile network work now. did for me. 3g and edge and all
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Ok thanks
But can you explain that a bit better..step by step...
click this..click that etc...
I had to do a factory reset to got data working. 9020t
From the top of my head... If rooted
Download root explorer
Locate efs files....
Move the following files to root of SD card:
Nv.log
Nv_data.bin
Nv_data.bin.md5
Once ur done reboot and u should be ok
-Google Galaxy Tab
Also experiencing this. 9023
Factory reset = no dice.
Gonna try to narrow down the problem a bit. I flat out refuse to root my phone to fix an issue caused by an official OTA update.
geronimo789 said:
Also experiencing this. 9023
Factory reset = no dice.
Gonna try to narrow down the problem a bit. I flat out refuse to root my phone to fix an issue caused by an official OTA update.
Click to expand...
Click to collapse
Same opinion here regarding not rooting. Too bad the factory reset did not work for you, because it just did for me. A great relief that it did, too. Apparently the APN settings remained after the reset and it got 3g and data connection again even during the phone setup.
geronimo789 said:
Also experiencing this. 9023
Factory reset = no dice.
Gonna try to narrow down the problem a bit. I flat out refuse to root my phone to fix an issue caused by an official OTA update.
Click to expand...
Click to collapse
Agreed ..shouldnt have to root to fix an official OTA update
derrell1978 said:
I had to do a factory reset to got data working. 9020t
Click to expand...
Click to collapse
How did you do your reset?
Settings - backup & reset - factory data reset ?
or
bootup the device holding vol up power and do reset from there?
why dont you guys do what i said to do?
go to settings --> click more at the top --> click mobile networks --> click access point names --> opn the options menu and select reset to default.
now click on network operators in the mobile network settings menu --> allow it to search (can take a while)
here's where it takes a little fiddling. i actually selected ATT first so that it would change all the settings. then i selected tmobile afterwards. then it just connected to the mobile network without a hitch. i believe i rebooted but am not sure.
kramer987 said:
why dont you guys do what i said to do?
go to settings --> click more at the top --> click mobile networks --> click access point names --> opn the options menu and select reset to default.
now click on network operators in the mobile network settings menu --> allow it to search (can take a while)
here's where it takes a little fiddling. i actually selected ATT first so that it would change all the settings. then i selected tmobile afterwards. then it just connected to the mobile network without a hitch. i believe i rebooted but am not sure.
Click to expand...
Click to collapse
It doesnt work...tried all that ..but thanks anyway.
you will need a radio.
whats your current baseband version?
luv2vexx said:
you will need a radio.
whats your current baseband version?
Click to expand...
Click to collapse
How do I find that out?
luv2vexx said:
you will need a radio.
whats your current baseband version?
Click to expand...
Click to collapse
ok found it!
i9020XXKI1
Seems I am having the same exact issue, with that exact same baseband. Only I am running into it with CM9 Alfa 17.
Sounds like some files for the radio or something got left out.
Not sure if it's related but I can't get a signal either on my i9020a now. Flashing to a previous gingerbread rom doesn't bring it back either.
Flash kf1 radio best one so far
Sent from my Nexus S using XDA Premium
**If I helped you please remember to hit the thanks button**

NO DATA?!?!

I changed ROM's and I cant get data back. Ive tried multiple and its a no go. I NEED my data. What do I do? Ive checked my APN settings....help!!!
what network are you on?
have you tried deleting all other APN's except the one you need?
Do you have signal at all / are you connected to the phone network and able to take / receive calls? or is nothing working?
williamj1 said:
what network are you on?
have you tried deleting all other APN's except the one you need?
Do you have signal at all / are you connected to the phone network and able to take / receive calls? or is nothing working?
Click to expand...
Click to collapse
I am on Straight Talk.
I just deleted the other "ATT" apn that was there. Currently only have the ST one selected and present.
I have "H+" in the notification pane and its "blue" meaning what i thought was "active data". But nothing
sx4dude2013 said:
I am on Straight Talk.
I just deleted the other "ATT" apn that was there. Currently only have the ST one selected and present.
I have "H+" in the notification pane and its "blue" meaning what i thought was "active data". But nothing
Click to expand...
Click to collapse
has the data worked at any point before?
This is the problem that lots of people over in this thread are having ...
http://forum.xda-developers.com/showthread.php?t=2084706&
We are hoping for some sort of fix to this in 4.2.2, but until then we haven't been able to find a solution. If you are 100% certain the APN settings are correct (I can't help with that as from UK so not familiar with that network) then there isn't much you can do. For me, the only thing I ever find that sometimes brings it back is if I turn airplane mode on, leave it for 30 seconds then turn it off again. Likewise, you can click on the APN to reset that each time.
If you are rooted, Faux released a modified kernal which is meant to improve data drops and the wake issue which some nexus's have.
williamj1 said:
has the data worked at any point before?
This is the problem that lots of people over in this thread are having ...
http://forum.xda-developers.com/showthread.php?t=2084706&
We are hoping for some sort of fix to this in 4.2.2, but until then we haven't been able to find a solution. If you are 100% certain the APN settings are correct (I can't help with that as from UK so not familiar with that network) then there isn't much you can do. For me, the only thing I ever find that sometimes brings it back is if I turn airplane mode on, leave it for 30 seconds then turn it off again. Likewise, you can click on the APN to reset that each time.
If you are rooted, Faux released a modified kernal which is meant to improve data drops and the wake issue which some nexus's have.
Click to expand...
Click to collapse
Ive NEVER had this issue before. I get Facebook notificaitons but cant open them because of "Network Error" WTF......
sx4dude2013 said:
Ive NEVER had this issue before. I get Facebook notificaitons but cant open them because of "Network Error" WTF......
Click to expand...
Click to collapse
did you cut your own micro sim?
try a spare sim if you have one.
Reset APN to default, delete all and try again.
I don't know what else to suggest other than the above / phoning google / rooting and trying a different kernal and ROM / wait for 4.2.2 update.
(In the meantime please post in the thread linked above, no need for this duplicate thread just for your issue )
sx4dude2013 said:
I changed ROM's and I cant get data back. Ive tried multiple and its a no go. I NEED my data. What do I do? Ive checked my APN settings....help!!!
Click to expand...
Click to collapse
Which ROM were you on when you first noticed the problem?

No Internet connection after software update to MHC19I

Hey fellas,
I just recently updated to the latest software version via OTA (running stock), and suddenly I cannot connect to the mobile Internet anymore even though it shows everything correct.. APN, cellular company and signal at the top of the screen..
Any idea?
Thanks
I've been having the same problem having updated to Pure Nexus last night and again this morning with very little help. When I went into the APN section the actual APN was not selected and that at least got me data but I cannot make phone calls out. They keep getting some sort of sim error.
opher50 said:
Hey fellas,
I just recently updated to the latest software version via OTA (running stock), and suddenly I cannot connect to the mobile Internet anymore even though it shows everything correct.. APN, cellular company and signal at the top of the screen..
Any idea?
Thanks
Click to expand...
Click to collapse
Not sure if it will help, but have you tried flashing back to an older radio?
mcmb03 said:
Not sure if it will help, but have you tried flashing back to an older radio?
Click to expand...
Click to collapse
That's impossible to check since I'm in a vacation :S
I had this same problem. Go to your dialer and enter
*#*#4636#*#*. This will get you in the test menu. Select phone info and click the 3 dot menu on the top right. Choose select radio band and then click USA band if that's your location. Reboot your phone. Now turn airplane mode on and go to settings and click more under wireless and networks. Click cellular networks and system select. Toggle home and automatic back and forth. Now toggle allow data when roaming off and then back on. Turn airplane mode off and you should be back up and running again. These steps worked for me anyway.
Solved my issue. Go to pure nexus setting, all the way at the bottom I have a phone and info. Then go into phone information. Then click menu in top right, select the band that works for you (had to set mine to USA, 6&7 Didnt work

Categories

Resources