Related
Hey guys I was trying to do a COMPLETE WIPE for a fresh start on 4.4 and start new.
I wiped and formated everything that is possible thinking once I flash stock 4.1.2 from AP Fastboot it would restore a clean factory version. I WAS VERY WRONG. So I flashed stock 4.1.2 and was getting it set up until I had to connect to WIFI, which would not turn on or find any signal. So I decided to skip and use mobile data... No dice either. Tried flashing .78 radio for the RAZR M among earlier radios.
I have no idea how to fix this, out of my years working with androids never have I had a problem as bad as this that I can't figure out. Does anyone have any suggestions that could help?
I'm planning on taking it in in a few days from now if I can't find a solution, normally the people at Verizon don't know crap when it comes to it being Unlocked or Rooted.
ANY HELP IS VERY MUCH APPRECIATED!!!
Sent from my Nexus 7 using XDA Premium 4 mobile app
If all else fails, try RSD...
Sent from my XT907 using Tapatalk
Rsd?
FYI I fixed Mobile data... Still working on WiFi...
Sent from my Nexus 7 using XDA Premium 4 mobile app
RSD is a program which will use an image file for the device to flash all needed files to stock, including the modem.
Sent from my XT907 using xda app-developers app
I've got similar issues to the OP.
Somehow can only get data via cell networks (4G working).
I can't turn WiFi on either.
I tried to use RSD Lite 6.1.4 and 6.1.5 to go back to stock
Used the latest Motorola Drivers (from motorola website as of today)
The 4.1.2 file from the Firmware Team (VZW_XT907_4.1.2-9.8.1Q-66_1FF.xml.zip from http://sbf.droid-developers.org/scorpion_mini_xt907/list.php)
I get the following error in RSD.
Failed flashing process. 6/19 flash tz "tz.mbn" -> Phone returned FAIL
Click to expand...
Click to collapse
My phone (in Fastboot) says:
Fastboot Reason: Reboot to bootloader
usb connected
downgraded security version
update tz version failed
preflash validation failed for tz
Click to expand...
Click to collapse
lukkypuggy said:
Hey guys I was trying to do a COMPLETE WIPE for a fresh start on 4.4 and start new.
I wiped and formated everything that is possible thinking once I flash stock 4.1.2 from AP Fastboot it would restore a clean factory version. I WAS VERY WRONG. So I flashed stock 4.1.2 and was getting it set up until I had to connect to WIFI, which would not turn on or find any signal. So I decided to skip and use mobile data... No dice either. Tried flashing .78 radio for the RAZR M among earlier radios.
I have no idea how to fix this, out of my years working with androids never have I had a problem as bad as this that I can't figure out. Does anyone have any suggestions that could help?
I'm planning on taking it in in a few days from now if I can't find a solution, normally the people at Verizon don't know crap when it comes to it being Unlocked or Rooted.
ANY HELP IS VERY MUCH APPRECIATED!!!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
A format will require a full rsd to restore or use my restore sticky.
Hey Avi
I was using your restore sticky, just going with stock to avoid any issues. I'm also pretty sure I followed your directions exactly. Used VRZ_XT907_9.8.1Q-78-1_1FF.xml
I get the following out of RSD lite 6.1.15.
Failed flashing process. 1/19 flash partition "gpt_main0.bin" -> Phone returned FAIL.
Click to expand...
Click to collapse
The phone says
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
Click to expand...
Click to collapse
Separate note, Is the VRZ*.xml what you mean by Full RSD vs the VZW*.xml?
_Boondock_ said:
Hey Avi
I was using your restore sticky, just going with stock to avoid any issues. I'm also pretty sure I followed your directions exactly. Used VRZ_XT907_9.8.1Q-78-1_1FF.xml
I get the following out of RSD lite 6.1.15.
The phone says
Separate note, Is the VRZ*.xml what you mean by Full RSD vs the VZW*.xml?
Click to expand...
Click to collapse
I mean full rsd (or my restore) vs radio update: will not fix the partition.
My restore is only for ...78 unlocked. The ...78 locked needs the RZR step too.
aviwdoowks said:
I mean full rsd (or my restore) vs radio update: will not fix the partition.
My restore is only for ...78 unlocked. The ...78 locked needs the RZR step too.
Click to expand...
Click to collapse
Gotcha on the full RSD, that is what I've been trying to do.
I've got an unlocked bootloader with status code 3. But still no dice getting the 78 onto my device. What is the RZR step? I think I missed that.
_Boondock_ said:
Gotcha on the full RSD, that is what I've been trying to do.
I've got an unlocked bootloader with status code 3. But still no dice getting the 78 onto my device. What is the RZR step? I think I missed that.
Click to expand...
Click to collapse
I did see a thread where someone deleted one of the xml steps & got past that error. Recent post too.
Rzr thread see my guide in general.
PC says "Failed flashing process. Failed flashing process. 6 / 19..."
RAZR M says " downgraded security version
gpt_main version failed
preflash validation failed for GPT
downgraded security version
update gpt_main version failed"
Sent from my Nexus 7 using XDA Premium 4 mobile app
lukkypuggy said:
PC says "Failed flashing process. Failed flashing process. 6 / 19..."
RAZR M says " downgraded security version
gpt_main version failed
preflash validation failed for GPT
downgraded security version
update gpt_main version failed"
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The current stock version is 9.8.1Q.94-1 and the full XML.zip is up on droid developers site with all the rest of the firmware. Use that and it won't fail because of trying to revert to an older gpt.bin file.
cellzealot said:
The current stock version is 9.8.1Q.94-1 and the full XML.zip is up on droid developers site with all the rest of the firmware. Use that and it won't fail because of trying to revert to an older gpt.bin file.
Click to expand...
Click to collapse
OK I am still getting a fail.
I read somewhere im supposed to edit some lines of code in the XML file that is in the zip but im not sure where to begin...
Code:
<?xml version="1.0"?>
<flashing>
<header>
<phone_model model="SM_JB_VZW_CFC" />
<software_version version="smq_vzw-user 4.1.2 9.8.1Q-94-1 77 release-keysSM_BP_101032.021.32.80P" />
<interfaces>
<interface name="AP" />
</interfaces>
</header>
<steps interface="AP">
<step operation="getvar" var="max-download-size" />
<step operation="oem" var="fb_mode_set" />
<step operation="flash" partition="partition" filename="gpt_main0.bin" MD5="FB3D9083F1B5890BBF2FA8617D31A70A" />
<step operation="flash" partition="sbl1" filename="sbl1.mbn" MD5="FB458002D5B1B3430B0519E0F206C361" />
<step operation="flash" partition="sbl2" filename="sbl2.mbn" MD5="5E1E096A29FB49A955C595B3E7759CA7" />
<step operation="flash" partition="sbl3" filename="sbl3.mbn" MD5="16813AF63FFBF4044FBF72D75BD47DB1" />
<step operation="flash" partition="rpm" filename="rpm.mbn" MD5="0C3F4FF07D3B5037E17B8EFE5F4C66EE" />
<step operation="flash" partition="tz" filename="tz.mbn" MD5="474F31095C8146D1F86D0E5CE72B878F" />
<step operation="flash" partition="aboot" filename="emmc_appsboot.mbn" MD5="A40F6AAFA4A581023A2EDA9F23202453" />
<step operation="flash" partition="modem" filename="NON-HLOS.bin" MD5="3E7F1624D8DDA8C8E4995F99A68B321F" />
<step operation="flash" partition="fsg" filename="fsg.mbn" MD5="0898A1859E77F05B62E2A6D04251E30E" />
<step operation="erase" partition="modemst1" />
<step operation="erase" partition="modemst2" />
<step operation="flash" partition="logo" filename="logo.bin" MD5="506F42184C465D9CD8BB2BD27DB77F1A" />
<step operation="flash" partition="devtree" filename="device_tree.bin" MD5="66AD59B88203992915EAF476C9E17E58" />
<step operation="flash" partition="boot" filename="boot.img" MD5="624AD56D21BE40E2C62F2D8666C1A3DA" />
<step operation="flash" partition="recovery" filename="recovery.img" MD5="A51ACEFFB3DE7BB9259F345AF8E5ABB6" />
<step operation="flash" partition="cdrom" filename="cdrom" MD5="8C578BC3308036F86BF30BA802E488DF" />
<step operation="flash" partition="system" filename="system.img" MD5="AFF82B543EF8E558892AA67D4909C067" />
<step operation="erase" partition="tombstones" />
<step operation="erase" partition="cache" />
<step operation="erase" partition="userdata" />
<step operation="oem" var="fb_mode_clear" />
</steps>
</flashing>
Try removing the getvar line and the two oem var set lines and try again.
cellzealot said:
Try removing the getvar line and the two oem var set lines and try again.
Click to expand...
Click to collapse
It seemed to work for a while... then then RSD said:
Code:
Failed flashing process. Failed flashing process. 17/20 flash system "system.img" -> Phone returned FAIL.; phone connected
What version of RSD Lite are you using?
6.15 is latest and has a newer binary that supports large partition image sizes.
Or use fastboot by itself to flash the images.
cellzealot said:
What version of RSD Lite are you using?
6.15 is latest and has a newer binary that supports large partition image sizes.
Or use fastboot by itself to flash the images.
Click to expand...
Click to collapse
I am using that version.
How can I manually flash them from fastboot?
I know how to flash IMG files but not BIN.
Use the following commands to flash the modem.
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot erase tombstones
If it's still failing to flash system with RSD Lite 6.15 then it is likely that you have other problems.
What was the error when flashing system?
Thank you so much!!!!!!!! It worked!!!!! She lives!!!!!!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Congrats! Glad it worked out.
Can any one help me to restore my XT907 back to stock JB 4.1.2 from the stock kitkat 4.4.2 update?
My current System version is: 183.46.10.XT907.Veryzon.en.US
Android Version: 4.4.2
Baseband Version: SM_BP_101031.042.32.86P
Kernal Version: 3.4.42-g5170b6b
[email protected] #1
Fri May 2 00:30:06 PDT 2014
Build Number: KDA20.62-10.1
Build Date: Fri May 2 00:20:25 PDT 2014
Please help me.. Thanks in advance...
Wouldn't recommend you try it on a locked bootloader.
Those that are unlocked shouldn't have any issues.
Technically, with a locked bootloader, if Fastboot will allow you to downgrade, then it should be possible.
You'd have to boot into Fastboot, then run the command:
fastboot flash system system.img
Where system.img is the 4.1.2 image file extracted from the fxz file. If it won't let you do this, then downgrade isn't possible. It will likely say failed flash and you'll have to flash something to kick the phone out of fastboot like logo.img.
You could also try RSDLite and try to flash the 4.1.2 fxz, but I doubt that will work because bootloader and such are not downgradeable and it will likely fail.
GnatGoSplat said:
Technically, with a locked bootloader, if Fastboot will allow you to downgrade, then it should be possible.
You'd have to boot into Fastboot, then run the command:
fastboot flash system system.img
Where system.img is the 4.1.2 image file extracted from the fxz file. If it won't let you do this, then downgrade isn't possible. It will likely say failed flash and you'll have to flash something to kick the phone out of fastboot like logo.img.
You could also try RSDLite and try to flash the 4.1.2 fxz, but I doubt that will work because bootloader and such are not downgradeable and it will likely fail.
Click to expand...
Click to collapse
Thanks for ur reply..
My bootloader is locked. I want to try downgrade to stock 4.1.2. Can u please send me the link to download stock 4.1.2 img and exact steps to downgrade?
Thnaks so much in advance..
kulsforu said:
Thanks for ur reply..
My bootloader is locked. I want to try downgrade to stock 4.1.2. Can u please send me the link to download stock 4.1.2 img and exact steps to downgrade?
Thnaks so much in advance..
Click to expand...
Click to collapse
You can get them here:
http://sbf.droid-developers.org/phone.php?device=8
You can extract the original system.img from the archive as well as logo.img in case the phone doesn't allow you to flash system.img, you can use logo.img to kick the phone out of Fastboot. You will need to install Motorola ADB drivers on your computer in advance, and also need a fastboot.exe file which I think you can find via Google, but if you have ever rooted your phone in the past, usually that also came with fastboot.
Anyway, get into fastboot mode by turning off the phone, then holding down all 3 buttons. Use vol- to select Fastboot and vol+ to choose it. Phone should boot into fastboot.
Connect to PC and issue command:
fastboot flash system system.img
If it works, the phone should be downgraded. If it says flash failed, then downgrade isn't possible. In that case, if the phone is stuck in fastboot mode and can't be rebooted, issue this command to get out of fastboot.
fastboot flash logo logo.img
That should let it reboot as normal.
I actually doubt it's possible to downgrade, but I haven't tried it myself so I can't say for sure.
GnatGoSplat said:
You can get them here:
http://sbf.droid-developers.org/phone.php?device=8
You can extract the original system.img from the archive as well as logo.img in case the phone doesn't allow you to flash system.img, you can use logo.img to kick the phone out of Fastboot. You will need to install Motorola ADB drivers on your computer in advance, and also need a fastboot.exe file which I think you can find via Google, but if you have ever rooted your phone in the past, usually that also came with fastboot.
Anyway, get into fastboot mode by turning off the phone, then holding down all 3 buttons. Use vol- to select Fastboot and vol+ to choose it. Phone should boot into fastboot.
Connect to PC and issue command:
fastboot flash system system.img
If it works, the phone should be downgraded. If it says flash failed, then downgrade isn't possible. In that case, if the phone is stuck in fastboot mode and can't be rebooted, issue this command to get out of fastboot.
fastboot flash logo logo.img
That should let it reboot as normal.
I actually doubt it's possible to downgrade, but I haven't tried it myself so I can't say for sure.
Click to expand...
Click to collapse
Thank u so much my friend, I need to clear that I m using this phone in India with Reliance CDMA network. If downgrade will succeed then will it in verizon locked condition or it will remain unlocked for global use? Also I need to add that I have never unlocked my bootloader or rooted my phone.
kulsforu said:
Thank u so much my friend, I need to clear that I m using this phone in India with Reliance CDMA network. If downgrade will succeed then will it in verizon locked condition or it will remain unlocked for global use? Also I need to add that I have never unlocked my bootloader or rooted my phone.
Click to expand...
Click to collapse
I think it would stay unlocked since you wouldn't be reflashing the radio.
It is easy enough to re-unlock if that should get reversed, however.
Ah, nevermind. Don't bother to try it. Even if you could succeed, you'd end up with black screen after the logo. The newer bootloaders will not allow Jellybean to boot. There is no way to downgrade. KitKat is a one way road with a locked BL. Sorry!
GnatGoSplat said:
Ah, nevermind. Don't bother to try it. Even if you could succeed, you'd end up with black screen after the logo. The newer bootloaders will not allow Jellybean to boot. There is no way to downgrade. KitKat is a one way road with a locked BL. Sorry!
Click to expand...
Click to collapse
:crying::crying::crying::crying::crying:
Sorry for the bad news. I'm in the same boat now too. Thought I would experiment with ways to preserve root, and long story short, now I'm stuck on an unrooted phone on stock KK with locked BL.
Why do you want to downgrade? If it's to be rooted, sorry, no solution for that. If there is some other issue, maybe there is a solution for that specific issue.
GnatGoSplat said:
Sorry for the bad news. I'm in the same boat now too. Thought I would experiment with ways to preserve root, and long story short, now I'm stuck on an unrooted phone on stock KK with locked BL.
Why do you want to downgrade? If it's to be rooted, sorry, no solution for that. If there is some other issue, maybe there is a solution for that specific issue.
Click to expand...
Click to collapse
The issue is my CDMA data is not working after upgrade to kitkat. I m from India and using Reliance CDMA sim. Before update, everything was working perfect. But now only data(EVDO or 1x) is not working. GSM data(3G & 2G) is working.
Please help if u have any solution for this issue.
GnatGoSplat said:
You can get them here:
http://sbf.droid-developers.org/phone.php?device=8
You can extract the original system.img from the archive as well as logo.img in case the phone doesn't allow you to flash system.img, you can use logo.img to kick the phone out of Fastboot. You will need to install Motorola ADB drivers on your computer in advance, and also need a fastboot.exe file which I think you can find via Google, but if you have ever rooted your phone in the past, usually that also came with fastboot.
Anyway, get into fastboot mode by turning off the phone, then holding down all 3 buttons. Use vol- to select Fastboot and vol+ to choose it. Phone should boot into fastboot.
Connect to PC and issue command:
fastboot flash system system.img
If it works, the phone should be downgraded. If it says flash failed, then downgrade isn't possible. In that case, if the phone is stuck in fastboot mode and can't be rebooted, issue this command to get out of fastboot.
fastboot flash logo logo.img
That should let it reboot as normal.
I actually doubt it's possible to downgrade, but I haven't tried it myself so I can't say for sure.
Click to expand...
Click to collapse
I'm also on official KK with locked bootloader, Can i flash kk modified system.img via this method ?
Prohyper said:
I'm also on official KK with locked bootloader, Can i flash kk modified system.img via this method ?
Click to expand...
Click to collapse
Sorry, with locked BL, you can't flash modified system.img or older system.img. I tried it just to make sure, and the phone wouldn't allow it.
GnatGoSplat said:
Sorry for the bad news. I'm in the same boat now too. Thought I would experiment with ways to preserve root, and long story short, now I'm stuck on an unrooted phone on stock KK with locked BL.
Why do you want to downgrade? If it's to be rooted, sorry, no solution for that. If there is some other issue, maybe there is a solution for that specific issue.
Click to expand...
Click to collapse
The issue is my CDMA data is not working after upgrade to kitkat. I m from India and using Reliance CDMA sim. Before update, everything was working perfect. But now only data(EVDO or 1x) is not working. GSM data(3G & 2G) is working.
Please help if u have any solution for this issue.
kulsforu said:
The issue is my CDMA data is not working after upgrade to kitkat. I m from India and using Reliance CDMA sim. Before update, everything was working perfect. But now only data(EVDO or 1x) is not working. GSM data(3G & 2G) is working.
Please help if u have any solution for this issue.
Click to expand...
Click to collapse
Good news is that major developments happened a month ago. :good:
You can now root AND unlock bootloader on KitKat. I think you can find the info you need in this thread:
http://forum.xda-developers.com/showthread.php?t=2783806
Once you have bootloader unlocked, you can downgrade back to JB. I have tried it and can confirm it works.
Good luck!
GnatGoSplat said:
Good news is that major developments happened a month ago. :good:
You can now root AND unlock bootloader on KitKat. I think you can find the info you need in this thread:
http://forum.xda-developers.com/showthread.php?t=2783806
Once you have bootloader unlocked, you can downgrade back to JB. I have tried it and can confirm it works.
Good luck!
Click to expand...
Click to collapse
Thanks much for update..
I can not getting the method. Actually I m new with these things.
Can you please explain how to use tr.apk?
Thanks in Advance..
kulsforu said:
Thanks much for update..
I can not getting the method. Actually I m new with these things.
Can you please explain how to use tr.apk?
Thanks in Advance..
Click to expand...
Click to collapse
You just run it and let it do its thing. Your phone should be rooted once it has rebooted. You can verify with any rootchecker app.
Then install and run Motopocalypse.apk to unlock your bootloader.
You can the use RSDLite to flash back to JellyBean using the JB fxz file. You will need to edit the xml file in the fxz file, removing the lines with gpt.bin and tz.mbn.
GnatGoSplat said:
You just run it and let it do its thing. Your phone should be rooted once it has rebooted. You can verify with any rootchecker app.
Then install and run Motopocalypse.apk to unlock your bootloader.
You can the use RSDLite to flash back to JellyBean using the JB fxz file. You will need to edit the xml file in the fxz file, removing the lines with gpt.bin and tz.mbn.
Click to expand...
Click to collapse
Thanks.. I m getting you.. But I m not using verizon network. My Razr M is unlocked for both CDMA and GSM carrier. I m using my Razr M in India and both CDMA and GSM are working at present. only DATA in CDMA is not working.
My question is will it be remain unlocked for both CDMA and GSM career in India after flashing back stock JELLY BEAN?
Thanks in Advance..
kulsforu said:
My question is will it be remain unlocked for both CDMA and GSM career in India after flashing back stock JELLY BEAN?
Click to expand...
Click to collapse
I believe so, yes.
GnatGoSplat said:
I believe so, yes.
Click to expand...
Click to collapse
Thanks.
Can you please send link to download JB 4.1.2 fxz file. and step by step instruction to flash the file.?
Hi everyone!
I have XT902 after trying unlock. Now it is booting up only in fastboot and recovery. Factory firmwares for xt902 are not flashing at all (only recovery partition is). BUT i can flash any partition from VERIZON_XT907_4.4.2_KPA20.10.1 except boot, recovery, system
Does anybody have XT902, updated to official 4.4.2 via OTA? With locked boot?
Please upload dumps of partitions boot, recovery, system
Not yet for 4.4.2 firmware via RSD, but 4.4.2 for this machine like there - information from technical support.
It is necessary to restore my brick.
also any OTA update .zip files for this phone are can be useful.
simbasacuk said:
Does anybody have XT902, updated to official 4.4.2 via OTA? With locked boot?
Click to expand...
Click to collapse
There is no 4.4.2 for the XT902 and according to Motorola never will be.
Here is the latest XML (it's still 4.0.4) and here is the latest OTA to 4.1.2.
simbasacuk said:
Hi everyone!
I have XT902 after trying unlock. Now it is booting up only in fastboot and recovery. Factory firmwares for xt902 are not flashing at all (only recovery partition is). BUT i can flash any partition from VERIZON_XT907_4.4.2_KPA20.10.1 except boot, recovery, system
Does anybody have XT902, updated to official 4.4.2 via OTA? With locked boot?
Please upload dumps of partitions boot, recovery, system
Not yet for 4.4.2 firmware via RSD, but 4.4.2 for this machine like there - information from technical support.
It is necessary to restore my brick.
Click to expand...
Click to collapse
Which bootloader version is installed?
Sent from my XT912 using Tapatalk
sd_shadow, i'm not sure. How to check?
simbasacuk said:
sd_shadow, i'm not sure. How to check?
Click to expand...
Click to collapse
see Attached screenshot
10.9B(*) (sha-61146a2, 2014-08-25
that's i have in this string. not surwe, but look's like 4.4.2 boot.
stock firmwares aren't flashing: boot get "failed preflash validation" and system get "PIV block validation for system failed"
trying OTA by link from recovery FAILed too =(
Any idea?
*boot status code 0
1) Fully charged phone
2) Used Motorola cable
3) Upgrade Moto drivers to latest version
4) Use newest Firmware
5) Used RSDLite 6.6 (newer maybe better) with the following settings:
Flash options: Restart after flexing and TI Blank flash
Use image files and delete files on exit
if flash still fails try
unzip firmware
open file VZW_xxxxxxxxxxxx.xml with a notepad (notepad++)
locate and remove 3 following lines :
Code:
<step operation="getvar" var="max-download-size" />
<step operation="flash" partition="partition" filename="gpt.bin" MD5="....MD5 sum here...." />
<step operation="flash" partition="tz" filename="tz.mbn" MD5="...MD5 sum here...." />
save changes in notepad, close notepad
Open RSD Lite and select edited .xml file to flash [email protected]k3nny2k
simbasacuk said:
10.9B(*) (sha-61146a2, 2014-08-25
that's i have in this string. not surwe, but look's like 4.4.2 boot.
stock firmwares aren't flashing: boot get "failed preflash validation" and system get "PIV block validation for system failed"
trying OTA by link from recovery FAILed too =(
Any idea?
*boot status code 0
Click to expand...
Click to collapse
Sent from my XT912 using Tapatalk
phone retured FAIL =(
BUT 4.4.2_KPA20.10.1 for XT907 IS flashing (all partitions except boot and system)
any idea what to do?
ok, now i need for OTA update for telstra xt905
looks like mainboard of my phone is xt905. need to check by flashing it via recovery.
Can somebody share link for ANY xt905 OTA update?
http://forum.xda-developers.com/showpost.php?p=38054477&postcount=115
link for .zip is dead unfortunatly. looking the same.
sd_shadow said:
1) Fully charged phone
2) Used Motorola cable
3) Upgrade Moto drivers to latest version
4) Use newest Firmware
5) Used RSDLite 6.6 (newer maybe better) with the following settings:
Flash options: Restart after flexing and TI Blank flash
Use image files and delete files on exit
if flash still fails try
unzip firmware
open file VZW_xxxxxxxxxxxx.xml with a notepad (notepad++)
locate and remove 3 following lines :
Code:
<step operation="getvar" var="max-download-size" />
<step operation="flash" partition="partition" filename="gpt.bin" MD5="....MD5 sum here...." />
<step operation="flash" partition="tz" filename="tz.mbn" MD5="...MD5 sum here...." />
save changes in notepad, close notepad
Open RSD Lite and select edited .xml file to flash [email protected]k3nny2k
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
Hay I have tried a lott to do it by the total screen looks like this
AP Fastboot Flash Mode ($)
10.9A(*) (sha-03216fb,2012-10-17 20:35:09)
eMMC Info: Size 8GB
Device is LOCKED, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Sticky bit fastboot
usb connected
Partition (boot) Security Version Downgraded
preflash validation failed for boot
=================================
Please help me, i have tried many ways including using XML to Bat file by Rootjunky
xt902 bricked
talvigi said:
Hay I have tried a lott to do it by the total screen looks like this
AP Fastboot Flash Mode ($)
10.9A(*) (sha-03216fb,2012-10-17 20:35:09)
eMMC Info: Size 8GB
Device is LOCKED, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Sticky bit fastboot
usb connected
Partition (boot) Security Version Downgraded
preflash validation failed for boot
=================================
Please help me, i have tried many ways including using XML to Bat file by Rootjunky
Click to expand...
Click to collapse
i have xt902 stuck on fastboot mode... and i have ota update tooo... but i dont know how to flash it... via fastboot mode... can i flash this ota update via fastboot mode... help me plx to save my phone
---------- Post added at 12:38 PM ---------- Previous post was at 12:36 PM ----------
simbasacuk said:
Hi everyone!
I have XT902 after trying unlock. Now it is booting up only in fastboot and recovery. Factory firmwares for xt902 are not flashing at all (only recovery partition is). BUT i can flash any partition from VERIZON_XT907_4.4.2_KPA20.10.1 except boot, recovery, system
Does anybody have XT902, updated to official 4.4.2 via OTA? With locked boot?
Please upload dumps of partitions boot, recovery, system
Not yet for 4.4.2 firmware via RSD, but 4.4.2 for this machine like there - information from technical support.
It is necessary to restore my brick.
Click to expand...
Click to collapse
i know there is an update of 4.4.2 and i have it but i dont know how can i flash it becuse boootloader is locked and phone is stuck on fastboot mode... i can upload it if u say
This thread has been created
for
Questions & Answers/Troubleshooting
Specific to
Moto G4 Plus
XT1640, XT1641, XT1642, XT1643 XT1644
Please feel free to share issues, questions and offer help. Noob questions are welcomed.
It is always best to use the Thanks button , in lieu of simply posting "Thank you".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please keep discussion focused, on questions pertaining to this Device
List of supporters@strongst@sd_shadow.........
To those seeking help: Please don't bombard the supporters with PMs asking for help. Instead, ask your question here in the thread so others can benefit from the solution to your problem as well. If you want to be sure someone particular gets notified of your question, put his / her username directly after an @.If you have ROM-related questions, post in the relevant ROM Q&A thread (if there is one) or directly in the ROM development thread. Thank you!Supporters: If you want to be put on or off the list, just make a request here in the thread!Before posting anything, I strongly advise you to read
Forum Rules
[GUIDE] - XDA New User Guide - Getting started on XDA
XDA Tour
[Index]Motorola Flashing Utilities, Firmware, and more
[INDEX] Moto G4 Plus
[HELP] thread for custom ROMs
Please look for a similar thread when visiting another device forum.
If you would like to create a [Help Thread] please Click Here.
I'm not planning on adding every Rom or Mod,
but if you have a suggestion for other links
Please post them here.
FAQs
UnLocking the Bootloader
ReLocking the Bootloader
https://forum.xda-developers.com/mo...lus-xt1640-43-athene-npj25-93-t3549369/page43
[Fixing] Baseband <not found> / IMEI=0 / No Network After Flash / Issues
Fixing your Moto stuck in Qualcomm QHSUSB_Bulk or qloader mode
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
Using Lenovo's MOTO Smart Assistant to Update/Repair/Backup
Custom Roms/Recovery/Root/
Firmware
https://mirrors.lolinet.com/firmware/moto/
Specs
Karumbaiah said:
@sd_shadow great work brother. I'm badly in need of some help from you.
I've got everything right from your tutorial. Except for, when I try to flash the firmware on RSD lite, flashing stops at with an error "Failed flashing process. 3/27 flash partition "gpt.bin" -> Phone returned FAIL"
I'm assuming this is because of a stupidest mistake that I did while I was trying to flash the nougat update zip on my Moto G4 Plus (XT1634). Out of my right sense, I used the firmware downgrade codes while flashing the updated zip. This might have incorrectly flashed the partition, boot image and the recovery image from the update file.
Now I'm stuck with the bootloader which gives my security version downgrade error when I try to flash even the latest MM firmware.
I was somehow able to flash an extracted recovery image from the nougat update zip. But, it just gives me a blank screen when I select the option ' apply update from SD card '
Attached is a picture of the bootloader and recovery screen. Any help in reviving my phone is greatly appreciated.
Click to expand...
Click to collapse
Did you try removing?
Code:
<step operation="getvar" var="max-download-size" />
<step operation="flash" partition="partition" filename="gpt.bin" MD5="....MD5 sum here...." />
<step operation="flash" partition="tz" filename="tz.mbn" MD5="...MD5 sum here...." />
as described in post #6 of my thread?
sd_shadow said:
Did you try removing?
Code:
no
<step operation="getvar" var="max-download-size" />
<step operation="flash" partition="partition" filename="gpt.bin" MD5="....MD5 sum here...." />
<step operation="flash" partition="tz" filename="tz.mbn" MD5="...MD5 sum here...." />
as described in post #6 of my thread?
Click to expand...
Click to collapse
Hi,
Yes. I tried removing those lines. Still did not work. I get the same error for every file (boot, recovery, oem etc.) that RSD lite tries to flash.
Karumbaiah said:
Did you try removing?
Hi,
Yes. I tried removing those lines. Still did not work. I get the same error for every file (boot, recovery, oem etc.) that RSD lite tries to flash.
Click to expand...
Click to collapse
what files are in the xml.zip ?
Sent from my XT1080 using XDA Labs
sd_shadow said:
what files are in the xml.zip ?
Sent from my XT1080 using XDA Labs
Click to expand...
Click to collapse
Hi,
I'm using the Moto_G4_Plus_XT1643_ATHENS_MPJ24.138-63_Stock _Img.zip file for flashing. Below is the list of files that are in this zip file.
adspso.bin
boot.img
Bootloader.img
Flashfile.xml
Fsg.mbn
Gpt.bin
Logo.bin
NON-HLOS.bin
OEM lock.bat
Oem.img
Recovery.img
regulatory_info_default.png
Servicefile.xml
slcf_rev_d_default_v1.0.nvm
system.img_sparsechunk.0
system.img_sparsechunk.1
system.img_sparsechunk.2
system.img_sparsechunk.3
system.img_sparsechunk.4
system.img_sparsechunk.5
system.img_sparsechunk.6
system.img_sparsechunk.7
PS - Bootloader is locked and there is no way I can unlock it now. I get the message "enable OEM unlock " error. I can't enable it as my phone doesn't boot.
@sd_shadow I'm willing to support in this thread, you can add me to the list :fingers-crossed:
Karumbaiah said:
Hi,
I'm using the Moto_G4_Plus_XT1643_ATHENS_MPJ24.138-63_Stock _Img.zip file for flashing. Below is the list of files that are in this zip file.
adspso.bin
boot.img
Bootloader.img
Flashfile.xml
Fsg.mbn
Gpt.bin
Logo.bin
NON-HLOS.bin
OEM lock.bat
Oem.img
Recovery.img
regulatory_info_default.png
Servicefile.xml
slcf_rev_d_default_v1.0.nvm
system.img_sparsechunk.0
system.img_sparsechunk.1
system.img_sparsechunk.2
system.img_sparsechunk.3
system.img_sparsechunk.4
system.img_sparsechunk.5
system.img_sparsechunk.6
system.img_sparsechunk.7
PS - Bootloader is locked and there is no way I can unlock it now. I get the message "enable OEM unlock " error. I can't enable it as my phone doesn't boot.
Click to expand...
Click to collapse
I was hoping there was a service.bat
I would setup adb/fastboot tools
see my setting up adb/ fastboot thread and Rootjunky video
links in my thread
Sent from my sailfish using XDA Labs
Setting up Adb and fastboot
http://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
then try flashing boot.img
reboot bootloader
then
some of the other files
Sent from my sailfish using XDA Labs
Code:
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
... repeat for the rest of the chunks
fastboot erase cache
fastboot reboot
Sent from my sailfish using XDA Labs
sd_shadow said:
Setting up Adb and fastboot
http://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
then try flashing boot.img
reboot bootloader
then
some of the other files
Sent from my sailfish using XDA Labs
Click to expand...
Click to collapse
Hi,
Thanks a lot for taking time in responding to me. just a bit confused here.
My device is already getting detected as a 'Motorola ADB Device,' under device manager. However, when I enter the code 'adb devices ' in Command window, it does not return any devices. Although my phone responds to all adb codes.
Should I still follow the adb and fastboot setup guide?
PS : 'fastboot devices ' code in Command window will show my device code listed.
Karumbaiah said:
Hi,
Thanks a lot for taking time in responding to me. just a bit confused here.
My device is already getting detected as a 'Motorola ADB Device,' under device manager. However, when I enter the code 'adb devices ' in Command window, it does not return any devices. Although my phone responds to all adb codes.
Should I still follow the adb and fastboot setup guide?
PS : 'fastboot devices ' code in Command window will show my device code listed.
Click to expand...
Click to collapse
adb commands are used in recovery and os
fastboot commands are used in bootloader/fastboot mode
sd_shadow said:
adb commands are used in recovery and os
fastboot commands are used in bootloader/fastboot mode
Click to expand...
Click to collapse
I totally understand that. My phone is responding to both adb and fastboot commands. Just that I get errors while in the process of flashing.
Hi everybody
I have installed cm13 on my moto g4 plus xt1642.
I have flashed elementalx-g4-0.07-cm.zip and installed mod wake gestures in xposed.
Here I'm getting a msg that wake gestures are not supported or they haven't been enabled .
Any suggestion is greatly appreciated.
Unable to call using Jio after updating to Nougat (Android 7.0)
Unable to make any calls using jio sim after updating to nougat of android 7.0 although mobile data is working completely fine. Also Jio4GVoice is online and no errors are shown regarding that app. Please help!
After Nougat update, I don't get navigation bar popping up when fingerprint scanner is touched while in full screen mode. For example while watching videos, I used to touch the scanner and navigation bar would pop up. Has this feature been removed?
shoaib033 said:
After Nougat update, I don't get navigation bar popping up when fingerprint scanner is touched while in full screen mode. For example while watching videos, I used to touch the scanner and navigation bar would pop up. Has this feature been removed?
Click to expand...
Click to collapse
On which rom was this for you working, what was your prior rom?
When we get features like pixel phone
Sent from my Moto G (4) using Tapatalk
strongst said:
On which rom was this for you working, what was your prior rom?
Click to expand...
Click to collapse
Preloaded stock marshmallow.
shivam kapoor said:
When we get features like pixel phone
Click to expand...
Click to collapse
When Motorola decides to implement it. Be happy to receive official N rom now.
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
shoaib033 said:
Preloaded stock marshmallow.
Click to expand...
Click to collapse
Maybe it's removed as you can't configure too much as the N Stock rom is really near to aosp. Wait for others to confirm, be patient as the rollout has started
I am getting the "No Sim" Error and was told that I needed the boot and bootloader from opp4, does anyone have this?
Thanks
idbl_fanatic said:
I am getting the "No Sim" Error and was told that I needed the boot and bootloader from opp4, does anyone have this? Thanks
Click to expand...
Click to collapse
How is flashing an older boot.img and bootloader.img going to help? There are plenty of places to find the old image file, just unzip and extract.... but don't think that's going to solve anything. Are you on the current stock .019 build?
v12xke said:
How is flashing an older boot.img and bootloader.img going to help? There are plenty of places to find the old image file, just unzip and extract.... but don't think that's going to solve anything. Are you on the current stock .019 build?
Click to expand...
Click to collapse
Doesn't matter now anyway, it started boot looping, had to get an RMA