[Q] Samsung Galaxy Y S5360 with DDMD1 - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

Y S5360. Firmware DDMD1
Want to install Hyperion on my Phone.
Country: India
Operator: Vodafone
Q1: From what i'm reading i have interpreted that Hyperion 9 cannot be installed if my phone has firmware DDMD1. If this is not true, HOW do I install Hyperion9?
Q2: If this is true, whats the next best alternative?
Help & advice solicited. Thank you in advance!

you can install it on any baseband the same way you install any other rom
if you loose imei make sure you are using the correct ril depending on your firmware/kernel combination

Baseband DDMD1
i am using Hyperion 2014 on same baseband and do not face any problem....
working fine and smooth without any lag
Using with Hell's Fusion #50 Kernel
i am also from india
:laugh::good::good::fingers-crossed::fingers-crossed:

How did the new Kernel Help?
nikhilrdm said:
i am using Hyperion 2014 on same baseband (DDMD1) and do not face any problem....
working fine and smooth without any lag
Using with Hell's Fusion #50 Kernel
i am also from india
Click to expand...
Click to collapse
Hi Nikhil
How did the Hells Fusion #50 kernel help you?
Would it be any different in performance of my phone if i just flashed the Hyperion 2014?
Or do you recommend Hells Fusion #50 definitely.
Appreciate your feedback.

A newbie?
XeeXee said:
Hi Nikhil
How did the Hells Fusion #50 kernel help you?
Would it be any different in performance of my phone if i just flashed the Hyperion 2014?
Or do you recommend Hells Fusion #50 definitely.
Appreciate your feedback.
Click to expand...
Click to collapse
I see that you're a new user in XDA. First let me explain what a kernel is. It's a piece of software which links your hardware to the software whereas a ROM is the software.
In Hyperion 9's thread you read that it is based upon DXMJ firmware. It's the firmware which he has modified and made this great ROM. You can flash it over any ROM, including stock which you have got, except the CM ones if you follow the instructions correctly. You have to flash the RIL fix from Hyperion 8's thread to get the networks working if you change your kernel.
As for your kernel question it is sometimes better than stock because you get more freqs, govs and ioscheds to customize your performance, battery life, etc. It also enables support for init.d scripts which can be used to speed up your phone.
You can use any custom kernel of your choice and Hells Fusion #50 is not a bad choice.
Good Luck flashing.

Savie rev 73 is also gd ....
Sent from my GT-S5360 using XDA Free mobile app

S5360 on DDMD1; Hyperion 2014
Hi Guys,
Thank you again for the immediate reverts. I had successfully installed the Hyperion 2014. Not done anything else.
Phone worked perfectly for 2 days. My kid was playing with the phone when she probably touched something in the touch control tab next to the notification tab.
PROB: The screen is off but everything is working. Cannot see anything. It could be that the display light has become 0 or something else.
On rebooting the phone i can see the hyperion logo ... then thats it ..... its dark again!
SOS Help required!

XeeXee said:
Hi Guys,
Thank you again for the immediate reverts. I had successfully installed the Hyperion 2014. Not done anything else.
Phone worked perfectly for 2 days. My kid was playing with the phone when she probably touched something in the touch control tab next to the notification tab.
PROB: The screen is off but everything is working. Cannot see anything. It could be that the display light has become 0 or something else.
On rebooting the phone i can see the hyperion logo ... then thats it ..... its dark again!
SOS Help required!
Click to expand...
Click to collapse
sounds like screen brightness is 0
Hyperion from memory has a hidden brightness slider - if you hold your finger on the status bar as if you are going to expand it but instead of sliding your finger down to expand it you slide it left the screen with get darker and if you slide it right the screen will get brighter
The problem you will have is if you have a screen lock you will have to enter that in before you can get to the status bar
You can remove the screen lock easily if you have to - search how to
Else you will have to format data in cwm and everything will revert to default however you will loose all user data

Related

Green fuzz in camera using kernel by whitexp

I am using a GT-S5360T which is Telecom NZ version of Galaxy Y. I seem to be able to install most custom roms released for GT-S5360 fine, but. When using whitexp kernal with stock rom or latest cm7 release I have a green fuzz when accessing camera app. I see other threads with similar problem but nothing pertaining to my particular model.
I have two questions;
1. Is this because my model has the " T " at the end?
2. How can I fix this?
If some one could point me in the right direction I would greatly appreciate it.
well,
for the reason why it has that green fuzz i have exactly no idea since im not the developer of the kernel,
however,
try to use another kernel besides white's kernel,
or contact the dev or post in his kernel thread for further info
this post is approved by the national potato safety regulation
Thanks for reply. I would post there, but..
deathnotice01 said:
well,
for the reason why it has that green fuzz i have exactly no idea since im not the developer of the kernel,
however,
try to use another kernel besides white's kernel,
or contact the dev or post in his kernel thread for further info
this post is approved by the national potato safety regulation
Click to expand...
Click to collapse
I get the " you do not have permission to access this page. This could be due to one of several reasons: " screen when I try to post in the kernel thread. I think cause I'm newbie.
I like this kernel because it boots fast, it has cwm and my boot animation and power on sound play properly. Everything else seems to work with it i.e. busy box, root browser, link2sd, superuser, sys app installer and beats audio drivers and all the standard apps that don't require rooting it is just the camera.
One thing that I can say is that your "T" isnt the cause for this. T just indicates your region, its fine to install any ROM/kernel based on S5360. You might need to contact whitexp for the solution..
I will try contact White..
hitme987 said:
One thing that I can say is that your "T" isnt the cause for this. T just indicates your region, its fine to install any ROM/kernel based on S5360. You might need to contact whitexp for the solution..
Click to expand...
Click to collapse
Thanks, now I know my model isn't the problem I will try contact White... I wonder if anyone else has had the same problem or if everyone else has the same problem, I see no mention of it being a bug.
with CM7, you can have this error
But not with Strock rom ..
I only use my kernel and a lot of other people also not ..
and nobody had this problem with stock rom or custom roms like Creeds, repencis etc.;;
Stock rom & white0.8.0RC3 flashed with Odin3 V1.85
whitexp said:
with CM7, you can have this error
But not with Strock rom ..
I only use my kernel and a lot of other people also not ..
and nobody had this problem with stock rom or custom roms like Creeds, repencis etc.;;
Click to expand...
Click to collapse
Phone S/N :RV1C5OM2X1X
Model :GT-S5360T
Purchase from Telecom store in May this year.
Stock Rom is from http://forum.xda-developers.com/showthread.php?t=1714872
Perhaps you know what I might be doing wrong?
its crazy try a new app (camerazoom or other )
or a new stock rom or a custom rom ...
if no work ... flash other kernel :/
GT-S5360B
whitexp said:
its crazy try a new app (camerazoom or other )
or a new stock rom or a custom rom ...
if no work ... flash other kernel :/
Click to expand...
Click to collapse
I can get Camera to work with your kernel by flashing the PDA and MODEM pieces of the Brazil GT-S5360B firmware before flashing the white.1.3.3 in Odin.
Only problem I have then is my phone doesn't know which way is up or down unless I turn off auto rotate. Then when I flash WhiteXP the WiFi stops working.
...WiFi is fixed with the driver in WiFi fix thread..> http://forum.xda-developers.com/showthread.php?t=2027326
Screen rotation
Does any body know how to fix the problem with the screen rotation?
..

[Q] Spontaneous reboots

Can some one give some info on how i can determine where the spontaneous reboots come from on my phone. Of it a software or hardware related problem is? I already tryed another firmware with odin. But it still happens on ocassion.
Try using a different kernel
The two that work with all roms here are
Whitexp 1.1.3
Hells fusion #63
Both you will need to flash whitexp wifi driver after
Also make sure you have no scripts in etc/init.d folder that are causing problems if you have flashed any mods eg adrenaline engine
marcussmith2626 said:
Try using a different kernel
The two that work with all roms here are
Whitexp 1.1.3
Hells fusion #63
Both you will need to flash whitexp wifi driver after
Also make sure you have no scripts in etc/init.d folder that are causing problems if you have flashed any mods eg adrenaline engine
Click to expand...
Click to collapse
The original sgy rom is still used,i want to know where i can find these folders with those scripts. And is there a corpse cleaner that i can use, that cleans the phone from already removed apps. The phone is also not rooted.
Kernel
Phoneboot said:
The original sgy rom is still used,i want to know where i can find these folders with those scripts. And is there a corpse cleaner that i can use, that cleans the phone from already removed apps. The phone is also not rooted.
Click to expand...
Click to collapse
root the phone 1st den install hell fusion 50 or xp kernel ...and here u go..!!
Phoneboot said:
The original sgy rom is still used,i want to know where i can find these folders with those scripts. And is there a corpse cleaner that i can use, that cleans the phone from already removed apps. The phone is also not rooted.
Click to expand...
Click to collapse
To see those files...u'll need root explorar..
Nd that corpse cleaner..
Its sd maid ...dnt knw if its paid or free..
** rooting is new for me,
nd i am a noob to root....**

Cm7 compitable baseband?

I am on Hyperion final and tried to flash aosp 2.3.7 , y-escape , cm7 by biel.tv , kitkat experience v1.1 and they doesn't boot, stuck on bootanimation, and sometimes it pass it and vibrates for long time, in kitkat experience it booted fine then the screen turned green with strong vibrations, in aosp it doesn't even pass the boot logo
I performed a full wipe and formatted partitions many times, mounting every thing, redownloaded roms, So I think it is a baseband problem, anyone please tell me the cm7 comptiable baseband.
Note : I am on DXLL1.
Sent from my GT-S5360 using Tapatalk 2
Use DDLK2 as baseband and then flash the roms.When you have flashed your desired rom,flash the CSC of your region.
mohamedrashad said:
I am on Hyperion final and tried to flash aosp 2.3.7 , y-escape , cm7 by biel.tv , kitkat experience v1.1 and they doesn't boot, stuck on bootanimation, and sometimes it pass it and vibrates for long time, in kitkat experience it booted fine then the screen turned green with strong vibrations, in aosp it doesn't even pass the boot logo
I performed a full wipe and formatted partitions many times, mounting every thing, redownloaded roms, So I think it is a baseband problem, anyone please tell me the cm7 comptiable baseband.
Note : I am on DXLL1.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
What kernel do you use? This problem of bootloop mostly occurs on stock kernel. Try to change kernel and try to flash again. There are so many kernels you can choose from. Don't ask me the link. Search it yourself.
You can use Percy's Cyanogenmod kernels for flashing the ROM based on CM.
Here's the link to the kernel thread: Click here to view
If it doesn't solve your problem, feel free to PM me.
Press thanks if I have helped you.
the_pirate_predator said:
What kernel do you use? This problem of bootloop mostly occurs on stock kernel. Try to change kernel and try to flash again. There are so many kernels you can choose from. Don't ask me the link. Search it yourself.
You can use Percy's Cyanogenmod kernels for flashing the ROM based on CM.
Here's the link to the kernel thread: Click here to view
If it doesn't solve your problem, feel free to PM me.
Press thanks if I have helped you.
Click to expand...
Click to collapse
I am on hells fusion 50
I flash percy cm2 and format every thing then install, still doesn't boot
Sent from my GT-S5360 using Tapatalk 2
aniket.lamba said:
Use DDLK2 as baseband and then flash the roms.When you have flashed your desired rom,flash the CSC of your region.
Click to expand...
Click to collapse
Will try this
Sent from my GT-S5360 using Tapatalk 2
mohamedrashad said:
I am on hells fusion 50
I flash percy cm2 and format every thing then install, still doesn't boot
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
theres your problem right there - you are not on an ext4 system partition which is required to boot cm7
flash percys kernel in cwm with system mounted
now for the important part
REBOOT TO RECOVERY!
you must reboot to recovery after flash the kernel - do not just flash the rom without rebooting to recovery
once you have rebooted to recovery you may have mount errors - ignore them
format system
format data
format cache
mount system
mount data
mount cache
install from zip and select cm7
format data again
optional steps
mount system
flash gapps
restart
I do everything you said but I dont do format data after flash, ok, I will try this and tell you in some time, Thanks
Sent from my GT-S5360 using Tapatalk 2
mohamedrashad said:
I do everything you said but I dont do format data after flash, ok, I will try this and tell you in some time, Thanks
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
remove your sim card - if it boots then you know its baseband
mohamedrashad said:
I am on Hyperion final and tried to flash aosp 2.3.7 , y-escape , cm7 by biel.tv , kitkat experience v1.1 and they doesn't boot, stuck on bootanimation, and sometimes it pass it and vibrates for long time, in kitkat experience it booted fine then the screen turned green with strong vibrations, in aosp it doesn't even pass the boot logo
I performed a full wipe and formatted partitions many times, mounting every thing, redownloaded roms, So I think it is a baseband problem, anyone please tell me the cm7 comptiable baseband.
Note : I am on DXLL1.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
DDMD1 is the best baseband for CM7!
Press Thanks if it helped!
lionelsuyog said:
DDMD1 is the best baseband for CM7!
Press Thanks if it helped!
Click to expand...
Click to collapse
there is no 'best' baseband - just those that will work and those that wont
theres no point using ddmd1 if you are from europe for example - much better using a firmware starting xx and not dd in that case - not everyone is from india
marcussmith2626 said:
there is no 'best' baseband - just those that will work and those that wont
theres no point using ddmd1 if you are from europe for example - much better using a firmware starting xx and not dd in that case - not everyone is from india
Click to expand...
Click to collapse
I'm not from India! Im a Nepali! (No Offence) And yeah I 2 experienced problem while using DXLL1, but when I updated it to DDMD1, CM7 worked fine! :good:
lionelsuyog said:
I'm not from India! Im a Nepali! (No Offence) And yeah I 2 experienced problem while using DXLL1, but when I updated it to DDMD1, CM7 worked fine! :good:
Click to expand...
Click to collapse
DD is indian firmware which is why I said india
DX is Indonesia, Malaysia, Philippines, Singapore, Vietnam
They may inlude other countries which can also use these firmwares fine - it is region based not specific countries
its best to flash a firmware from your region which is why I said people from europe shoud flash a firmware starting with XX
If it works for you great

[Q&A] [ROM] Hyperion 9 GM Final Build Final Rev + Update-01

Q&A for [ROM] Hyperion 9 GM Final Build Final Rev + Update-01
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
–NigthFury– said:
can you give a full review like how you installes.hows the UI.nothings perfect so does this rom have bugs
Click to expand...
Click to collapse
this roms UI is pretty smooth..clean and ofc transparent...though the sound quality lags a bit behind...as for bugs..i found that wifi toggle bug still being there..ut thats fine as far as im getting a stable performance...overall i liked this rom
just get the Cwm provided there and flash the rom...with everything mounted...if you are getting imei probs. then flash the hyperion gm08 Ril Fix...that helps for sure...
Cosmitron V said:
this roms UI is pretty smooth..clean and ofc transparent...though the sound quality lags a bit behind...as for bugs..i found that wifi toggle bug still being there..ut thats fine as far as im getting a stable performance...overall i liked this rom
just get the Cwm provided there and flash the rom...with everything mounted...if you are getting imei probs. then flash the hyperion gm08 Ril Fix...that helps for sure...
Click to expand...
Click to collapse
whats the wifi toggle problem
well if u touch the wifi logo in the toggle bar then at times it shows an error (only to shut down the wifi)....long pressing the symbol will get you directly to the wifi settings menu where u have to manually shut it down....other than this this Rom by Sir Carl has no bugs at all...and is THE BEST for sgy When overclocked by merruk 2.5 to 1.25 Ghz and undervolted to say -120mV with bacem tweak along with V6 Supercharger and Kickass kernelizer scripts(Latest versions of both) ,Bravia engine 3 ,beats Audio and Fly On Mod used....it runs like an Alien Device...i had a nice experience with it
can connect to internet but cannot make any calls
i have come across a strange problem on the HYPERION-09.DXMJ1.GM-FINAL.BUILD-UPD.01. i am able to connect to the internet and even 3g and wifi, but when i try to make calls it shows not connected to a network. The status bar also shows no service whereas it shows atleast 3-4 bar in network reception. also i can browse the internet during this time also i have no imei. i have added the screen shots.
[email protected] said:
i have come across a strange problem on the HYPERION-09.DXMJ1.GM-FINAL.BUILD-UPD.01. i am able to connect to the internet and even 3g and wifi, but when i try to make calls it shows not connected to a network. The status bar also shows no service whereas it shows atleast 3-4 bar in network reception. also i can browse the internet during this time also i have no imei. i have added the screen shots.
Click to expand...
Click to collapse
You have lost imei due to using wrong firmware kernel ril combination
You have several options
1- if using new firmware with an old kernel like hells fusion #50 just flash the correct ril file - see my ril thread links as ever below in my thread in my signature
2 - change kernels to match baseband firmware
3 -change baseband to match kernel
marcussmith2626 said:
You have lost imei due to using wrong firmware kernel ril combination
You have several options
1- if using new firmware with an old kernel like hells fusion #50 just flash the correct ril file - see my ril thread links as ever below in my thread in my signature
2 - change kernels to match baseband firmware
3 -change baseband to match kernel
Click to expand...
Click to collapse
thanks brother. as you suggested i took the no. 1 option and got the ril fix and once again thanks
Cosmitron V said:
well if u touch the wifi logo in the toggle bar then at times it shows an error (only to shut down the wifi)....long pressing the symbol will get you directly to the wifi settings menu where u have to manually shut it down....other than this this Rom by Sir Carl has no bugs at all...and is THE BEST for sgy When overclocked by merruk 2.5 to 1.25 Ghz and undervolted to say -120mV with bacem tweak along with V6 Supercharger and Kickass kernelizer scripts(Latest versions of both) ,Bravia engine 3 ,beats Audio and Fly On Mod used....it runs like an Alien Device...i had a nice experience with it
Click to expand...
Click to collapse
can you give me details instructions froms flashing rom to kernel and supercharge etc etc.my mobile has DDMD1 as latest firmaare can I try this rom and ofcoures thanks in advance
Swype language
Sorry for the dumb question.
But how do i install a new language for the Swype?
Good ROM
For me its H9 is the fastest & cool looking ROM.
I am using Hell fusion #50 kernel with whitexp wifi driver & RIL Fix.
All working fine.
dumtara said:
For me its H9 is the fastest & cool looking ROM.
I am using Hell fusion #50 kernel with whitexp wifi driver & RIL Fix.
All working fine.
Click to expand...
Click to collapse
I too have h9 with hellfusion and unlocked sim but cannot make a call it just shows only emergency calls.what to do
---------- Post added at 09:22 AM ---------- Previous post was at 09:19 AM ----------
@marcussmith2626 see the above post and can you help me and please tell me which ril fix to use I am INDIAN.
–NigthFury– said:
I too have h9 with hellfusion and unlocked sim but cannot make a call it just shows only emergency calls.what to do
---------- Post added at 09:22 AM ---------- Previous post was at 09:19 AM ----------
@marcussmith2626 see the above post and can you help me and please tell me which ril fix to use I am INDIAN.
Click to expand...
Click to collapse
read my ril thread - all information is there - links in my signature as always - its only for stock based roms where you have lost imei
marcussmith2626 said:
read my ril thread - all information is there - links in my signature as always - its only for stock based roms where you have lost imei
Click to expand...
Click to collapse
I have hyperion 9 with hellsfusion now which should I flash
–NigthFury– said:
I have hyperion 9 with hellsfusion now which should I flash
Click to expand...
Click to collapse
you obviously haven't read my ril thread as it actually states it on there - Im all for giving help but when I actually write all the instructions on my threads and you haven't read it that annoys me
If you are on a new firmware using an old kernel you will most likely need to flash......
Click to expand...
Click to collapse
I'll let you goto my thread to read the rest
–NigthFury– said:
I have hyperion 9 with hellsfusion now which should I flash
Click to expand...
Click to collapse
Flash HYPERION-08.GM-RIL.FIX file using CWM recovery.
Download zip file from this thread: http://forum.xda-developers.com/showpost.php?p=45885860&postcount=4
post #4
I dont have any haptic feedback when I touch soft buttons.is there a solution
–NigthFury– said:
I dont have any haptic feedback when I touch soft buttons.is there a solution
Click to expand...
Click to collapse
Come on guys we really need to learn to use the search feature
I'll point you to a possible thread solution this time
Don't forget to mount system before you flash the zip
http://forum.xda-developers.com/showthread.php?t=2700849
I Cant turn on wifi hotspot.
–NigthFury– said:
I Cant turn on wifi hotspot.
Click to expand...
Click to collapse
Can you turn WiFi on?
If it just says scanning & doesn't find any WiFi (assuming that there are some in range) you are using the wrong WiFi driver
See below for correct driver - Flash in cwm with system mounted
These are for stock based gb roms only
For whitexp kernel & hells fusion use - http://d-h.st/1ON
For all other stock based kernels use - http://d-h.st/q8W
If you can turn on wifi & can detect networks but wifi hotspot still doesn't work than use a 3rd party app like foxfi
Hyperion9 Removing Transparent Apps
Can someone help me how to remove the transparent background of all app in hyperion9 because I want to mod my mms.apk to change the background....
Tnx in advance and I will press tnx if you help me....

[Q&A] [ROM][PORT][STOCK] TouchWiz Resurrected V1 (Build #2 Added!)

Q&A for [ROM][PORT][STOCK] TouchWiz Resurrected V1 (Build #2 Added!)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Proximity sensor is working
joshclaudio said:
Hello there sir The proximity is not working while on phone calls. Even when you test it with *#0*#, there is no response when you place your palm over the sensor
Click to expand...
Click to collapse
I was trying to fix this using adb,
when i put this command
cat /sys/devices/virtual/sensors/proximity_sensor/prox_cal
it replied "no such file or directory"
after then, I INSTALLED PROXIMITY SENSOR FINDER & RUN IT.
IT'S AMAZINGLY WORKING NOW !!!!!!!!!!!!!!!!!!!
https://play.google.com/store/apps/details?id=com.tigermonster.proxfinder
rom
i notice that when i was in built in internet browser when i go to settings of browser and it start blinking, need to fix,
Badboy Padilla said:
i notice that when i was in built in internet browser when i go to settings of browser and it start blinking, need to fix,
Click to expand...
Click to collapse
same thing happens with me when i open MX player, screen starts blinking with I/O scheduler "null".
sir how to put weather on lockscreen?
help!!!
please tell me where is the option for USB palomiarla, I'll flash another rom and can not find it, thanks.
goldykb said:
I was trying to fix this using adb,
when i put this command
cat /sys/devices/virtual/sensors/proximity_sensor/prox_cal
it replied "no such file or directory"
after then, I INSTALLED PROXIMITY SENSOR FINDER & RUN IT.
IT'S AMAZINGLY WORKING NOW !!!!!!!!!!!!!!!!!!!
https://play.google.com/store/apps/details?id=com.tigermonster.proxfinder
Click to expand...
Click to collapse
I installed the app you have stated, but it's not working for me. How did you made it work?
waiting....
Proximity Sensor not working
Hai NGuyen said:
Proximity Sensor not working
Click to expand...
Click to collapse
You can try flashing my zip below - its one I did for cm7 ages ago however I don't know if it works on stock roms
If not just replace the sensor files with the ones from stock rom
Flash this in cwm with system mounted
http://forum.xda-developers.com/attachment.php?attachmentid=2669398&d=1396684336
Also someone else posted another possible solution a few posts above yours - did you try it or have you even read it?
Thank you...
marcussmith2626 said:
You can try flashing my zip below - its one I did for cm7 ages ago however I don't know if it works on stock roms
If not just replace the sensor files with the ones from stock rom
Flash this in cwm with system mounted
http://forum.xda-developers.com/attachment.php?attachmentid=2669398&d=1396684336
Also someone else posted another possible solution a few posts above yours - did you try it or have you even read it?
Click to expand...
Click to collapse
but it's also does not working
Hai NGuyen said:
but it's also does not working
Click to expand...
Click to collapse
Like I said those were for cm7 - replace with stock sensor files & test
Please don't ask me to provide as I no longer have them
@goldykb, how did you fix the proximity sensor? Please reply... Thanks
Multi-Window Tab
Hello people,
Is there a way to turn off the multi-window tab on the main screen ? Maybe there is a way that I haven't found, would be glad if i can turn it off....
Twillight_Sparkle said:
Hello people,
Is there a way to turn off the multi-window tab on the main screen ? Maybe there is a way that I haven't found, would be glad if i can turn it off....
Click to expand...
Click to collapse
Go to Settings > Display. There you can find the option to disable MultiWindow
marcussmith2626 said:
Like I said those were for cm7 - replace with stock sensor files & test
Please don't ask me to provide as I no longer have them
Click to expand...
Click to collapse
Not working too
Sent from my GT-S5360 using Tapatalk 2
help!!!
after flashing, my fm radio, didn't work. help!
mhegz said:
after flashing, my fm radio, didn't work. help!
Click to expand...
Click to collapse
Did you flashed the new build (#2)?
FM Radio is not working in #1 but it is already fixed and implemented in build #2.
Great!
This is a killer ROM
Can you add digital clock widget and s5 wheater clock? There is analog clock only
The S5 lockscreen effect is not same like as the original one hehehe....
And also add swipe to remove and kill task in multitasking
And please add soft key feature like nexus and cm for galaxy y
Emergency Calls Only
I flashed the ROM but when I turned on the phone, there was no connection. Also wi-fi does not work. So I restored the previous ROM (MIUI). What can the problem be? Would you help me please?
efisane said:
I flashed the ROM but when I turned on the phone, there was no connection. Also wi-fi does not work. So I restored the previous ROM (MIUI). What can the problem be? Would you help me please?
Click to expand...
Click to collapse
sounds like you are using the wrong kernel - use a stock based kernel and make sure you are using the correct ril file for your baseband kernel combination

Categories

Resources