Related
Hello,
First post on xda !
I readed lot of thread about sgy and have made many tests.
I got incredible battery autonomy improvement with the kuro kernel :good:
I will test others kernel to compare
Is there a way to backup the stock kernel and restore it with cwm
In order to test kernels quickly, i searched in many thread but have not found.
Thanks !
Same procedure with install custom kernel..
Extract boot.img from pdaXxx.tar (stock rom from doky thread)
Put in /sdcard/boot.img
Install with mai77 method use SGYbiCWM.zip with cwm-recovery from madteam/skin.
Read 1-10post in basic newbie guide from ronnieryan in sticky general section.
Welcome to xda and try with search and read important thread first before ask or open new thread.
savie said:
Same procedure with install custom kernel..
Extract boot.img from pdaXxx.tar (stock rom from doky thread)
Put in /sdcard/boot.img
Install with mai77 method use SGYbiCWM.zip with cwm-recovery from madteam/skin.
Read 1-10post in basic newbie guide from ronnieryan in sticky general section.
Welcome to xda and try with search and read important thread first before ask or open new thread.
Click to expand...
Click to collapse
I readed the basic thread but i did not understand about the KernelUpdate.zip
Many thanks it's work now
Unfortunately, i can not install your kernel. I have try flashing directly savieREV1_Kernel.zip but it's block on the boot logo. I also tried to extract the boog.img from the package and flash with KernelUpdate but it's the same thing... I'm back on kuro. (using XXLF3 stock rom)
Not tried the merruk at the moment
droidcyril said:
I readed the basic thread but i did not understand about the KernelUpdate.zip
Many thanks it's work now
Unfortunately, i can not install your kernel. I have try flashing directly savieREV1_Kernel.zip but it's block on the boot logo. I also tried to extract the boog.img from the package and flash with KernelUpdate but it's the same thing... I'm back on kuro. (using XXLF3 stock rom)
Not tried the merruk at the moment
Click to expand...
Click to collapse
KernelUpdate.zip from harrish?
Im not use that to coz to complicated
The simple method is from mai77 coz u not need put boot.img into zip file like faqbly method.
For my kernel just make sure u have sysinit in system/bin and 99complete in system/etc/init.d (those file from draktemor script) before installing.
I never try any custom rom only stock rom and never have problem with my kernel. I never release it if im not sure its working but if its make problem just i word "not compatible"
Ok thanks i have to make more search about the method mai77 and draktemor script, and retry your kernel
I prefer keep the stock rom at the moment... but i'm interresting to test the kernels !
droidcyril said:
Ok thanks i have to make more search about the method mai77 and draktemor script, and retry your kernel
I prefer keep the stock rom at the moment... but i'm interresting to test the kernels !
Click to expand...
Click to collapse
But dont install draktemor-a2sd im affraid u will get problem again if u use my kernel
Just copy paste and change permission..
Theres a lot of kernel now. U can choose, try, and compare which one is more near with ur need.
Kuro v.1.0 or White v.1.0 is the best kernel for stock rom coz its minimalis kernel with little modification so all features near with stock kernel.
Merruk and latest White kernel is advance kernel coz there alot modification so must prepare backup before try (nandroid backup via cwn and stockrom backup via odin)
cwm can't restore kernel. It doesn't have bmlunlock program.
kurotsugi said:
cwm can't restore kernel. It doesn't have bmlunlock program.
Click to expand...
Click to collapse
I see that the bmlunkock is in the KernelUpdate.zip.
I have found this mai77 method here
It's work fine to restore a stock rom boot.img
I don't find mai77 method without the KernelUpdate but i keep the searchs !
kurotsugi i have tested your kernel some days it's work very well !
haha...my kernel isn't as good as savie's. In most aspect his kernel is better and he's more well versed in kernel development.
I do more read and search and re-test it !
P.S. : the captcha are hard :cyclops:
Ah ok you include the bmlunkock in your kernel.zip
After many tentatives failed to install savie's kernel :crying:
I tried the white 0.8.0 RC3 with success and very easily and work very fine
please can someone give a way to install savie's kernel step by step and give links necessary
i haeve made
- The start step a fresh XXLF3 stock rom flashed
- I'm not afraid do reflash a stock rom, i have already done many times.
- I'm not afraid about data, i have the kies backup of my contacts, the sql lite contacts2.db from /data, the only thing i want to keep is this but i think it's done, don't care
Thanks all !
Finally I succeeded install the savie kernel :laugh:
[email protected] #60
All freq and gov works :good:
Let's go to give some thanks in this thread !
droidcyril said:
Finally I succeeded install the savie kernel :laugh:
[email protected] #60
All freq and gov works :good:
Let's go to give some thanks in this thread !
Click to expand...
Click to collapse
Great's I will try it
- My first mistake was to not read enough the savie thread and links associated.
- My second mistake i tried in first step to install Bacem and GovIO Tweak before the kernel... But the kernel already integrated this.
- Savie should add this on the first post of the thread please !
savie said:
I dont have creeds so i dont know its work or not..
Manual method In stock rom
- create init.d folder /system/etc/init.d
- copy 99complete to system/etc/init.d
- copy sysinit to system/bin
Ps.those file from draktemor-script
- install kernel
Maybe that step can use in creeds too..
Click to expand...
Click to collapse
- And maybe give the link to the draktemor-script in the repencis thread... here (a2sd.zip)
It's very good kernel :laugh:
Now i will try the dual boot and test CM7 but i read more before !
but don't install the draktemor-script
Just extract and copy this files :
- before create init.d folder /system/etc/init.d (stock rom and stock kernel without init.d support)
- copy 99complete to system/etc/init.d
- copy sysinit to system/bin
- fix the permissions
savie add this in your 1 post thread may make som noobs happy
Good day!
Sir Savie and Sir Kurutsogi I would like to ask regarding kernel. By the way I am using stock rom DXLF1 and with Data2SD of Kurutsogi http://forum.xda-developers.com/showthread.php?t=1622052 wherein my sd card has ext3 partition and the internal memory was changed from 290mb to 1gb.
My questions are:
1. If I will use the kernel of Savie (which was used in Icecream Bread rom and EVO X2 rom), will my current Data2SD will still work? If possible where can I get the boot.img file of Savies kernel? Also Sir Savie I was confused when I was reading you thread on kernel, Sir Savie can I get a link from you on the kernel that was used in Icecream Bread rom and Evo X2 rom?
2. If I have installed your kernel Sir Savie, is there a need to install app like the Nofrills CPU or CPU tuner in order to fully used the functions of kernel like changing the governors, i/o sched and frequencies? Or in you kernel, the said apps (CPU Tuner etc.) is already included and once your kernel is installed, all is done?
3. For my usage of SGY wherein, I have the Ram Manager Pro app, Start Up Auditor app, will it still be needed once I used your kernel Sir Savie? What settings should i used in the governors, i/o sched and frequencies if I only used my phone only for texting, calling, playing games (some HD games like assassins creed) fpse emulator, mp3 listening? Currently now my phone can get 88 to 98 mb RAM usage whenever I used the Easy task killer during making my phone iddle? Will this also possible when using Sir Savies kernel?
Sir Savie and Sir Kurutsogi hoping for your response and I would like to apologize to other XDA members for my questions and hoping for your kind understanding.
Thank you
am I dreaming? (lol)
EDIT: please forgive me. I never saw a question addressed politely like this one
1. if you're using my data2sd kernel, then the answer is no. you still can use this data2sd by creating a script in init.d folder. plz check additional stuff section in that thread. you don't need to clean your sdext partition. follow the step 1-4, reboot, done. this method have several bug, I hope you understand with the risk.
2. I don't know if savie include the app inside the zip file. you need to install them manually. nofrills is commonly enough for the govs n iosched modification. no need to use cpu tuner if you already have nofrills.
3. less ram doesn't always give good performance in android system. using a tweak is a lot better than clear the ram manually since it consume your battery a lot. the explanation is quite long. try to google it a lil bit.
kurotsugi said:
am I dreaming? (lol)
EDIT: please forgive me. I never saw a question addressed politely like this one
1. if you're using my data2sd kernel, then the answer is no. you still can use this data2sd by creating a script in init.d folder. plz check additional stuff section in that thread. you don't need to clean your sdext partition. follow the step 1-4, reboot, done. this method have several bug, I hope you understand with the risk.
2. I don't know if savie include the app inside the zip file. you need to install them manually. nofrills is commonly enough for the govs n iosched modification. no need to use cpu tuner if you already have nofrills.
3. less ram doesn't always give good performance in android system. using a tweak is a lot better than clear the ram manually since it consume your battery a lot. the explanation is quite long. try to google it a lil bit.
Click to expand...
Click to collapse
Sir Kurotsugi thank you for your response. My apology for the polite posting. Its just I am new comer here and want to learn a lot from you experts.
Sir in your reply in question #1, it only means that data2sd can be used in savies kernel by creating script init.d folder but it results to bugs. So would it be best if I use savies kernel just used link2sd in order to save the 290 mb internal memory?
Lastly Sir in question #3 it is better to use custom kernel to achieve better ram management and battery used instead of my stock apps ram mgr pro start up auditor and easy task killer?
Sir please kindly reply if I got your advises correctly.
Thank you
savie's kernel support a lot of similar method like a2sd++, amarullz, sem, etc. you can try to use my akuro if you lil bit lazy to google it. for the ram question stuff, you can read this one http://forum.xda-developers.com/showthread.php?t=1767363&page=120
Wow.. Kuro help me to translate it.. lol..
My questions are:
1. If I will use the kernel of Savie (which was used in Icecream Bread rom and EVO X2 rom), will my current Data2SD will still work? If possible where can I get the boot.img file of Savies kernel? Also Sir Savie I was confused when I was reading you thread on kernel, Sir Savie can I get a link from you on the kernel that was used in Icecream Bread rom and Evo X2 rom?
Click to expand...
Click to collapse
EvoX2 use #60REV1
ICB use #6REV2
My latest kernel is #73REV
Data2SD i thing support in my kernel but not with a2sd draktemor. Just make sure to clean 2nd partition to reduce error.
2. If I have installed your kernel Sir Savie, is there a need to install app like the Nofrills CPU or CPU tuner in order to fully used the functions of kernel like changing the governors, i/o sched and frequencies? Or in you kernel, the said apps (CPU Tuner etc.) is already included and once your kernel is installed, all is done?
Click to expand...
Click to collapse
Yes if u wanna change freq, governor, and iosched. Im only use cpumaster application.
3. For my usage of SGY wherein, I have the Ram Manager Pro app, Start Up Auditor app, will it still be needed once I used your kernel Sir Savie? What settings should i used in the governors, i/o sched and frequencies if I only used my phone only for texting, calling, playing games (some HD games like assassins creed) fpse emulator, mp3 listening? Currently now my phone can get 88 to 98 mb RAM usage whenever I used the Easy task killer during making my phone iddle? Will this also possible when using Sir Savies kernel?
Click to expand...
Click to collapse
For all app that u say above i dont have it so u can try
For gaming use max freq with performance gov but for light use 312 with smartassV2 and sio its enough.
savie said:
Wow.. Kuro help me to translate it.. lol..
EvoX2 use #60REV1
ICB use #6REV2
My latest kernel is #73REV
Data2SD i thing support in my kernel but not with a2sd draktemor. Just make sure to clean 2nd partition to reduce error.
Yes if u wanna change freq, governor, and iosched. Im only use cpumaster application.
For all app that u say above i dont have it so u can try
For gaming use max freq with performance gov but for light use 312 with smartassV2 and sio its enough.
Click to expand...
Click to collapse
Sir Savie thank you for your response. Sir just a clarification, the Data2sd of Sir Kurotsugi which is installed in my phone will still work if I use your kernels?
What kernels of yours is the best to use Sir Savie from the three?
Sir Savie, do I still need the boot.img file in your kernels in order that the data2sd to work? Because the boot.img file that I have right now is from Sir Kuro. Sir please kindly include the boot img file for the three kernels which I will choose from.
Thank you again Sir Savie and hoping for your response
ariszon said:
Sir Savie thank you for your response. Sir just a clarification, the Data2sd of Sir Kurotsugi which is installed in my phone will still work if I use your kernels?
Click to expand...
Click to collapse
I never use data2sd from kurotsugi but if i see the script should not problem with my kernel.
What kernels of yours is the best to use Sir Savie from the three?
Click to expand...
Click to collapse
Its hard question, coz everyone have difference preference..
#60REV2 only different in cwm integrated with #60REV1
But for #73REV its minimalist kernel
Sir Savie, do I still need the boot.img file in your kernels in order that the data2sd to work? Because the boot.img file that I have right now is from Sir Kuro. Sir please kindly include the boot img file for the three kernels which I will choose from.
Click to expand...
Click to collapse
U can backup boot.img from kurotsugi..
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
savie said:
I never use data2sd from kurotsugi but if i see the script should not problem with my kernel.
Its hard question, coz everyone have difference preference..
#60REV2 only different in cwm integrated with #60REV1
But for #73REV its minimalist kernel
U can backup boot.img from kurotsugi..
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Click to expand...
Click to collapse
Good day!
Sir Savie thank you for your response. I just check the three kernel of yours and choose the best according to my preference. Sir sorry for my noob question when you say minimalist it means just a simple kernel that can improve battery and ram usage?
I will just install your kernel through cwm and if I got problem regarding the data2sd, I will just ask question from you.
Thank you
ariszon said:
Good day!
Sir Savie thank you for your response. I just check the three kernel of yours and choose the best according to my preference. Sir sorry for my noob question when you say minimalist it means just a simple kernel that can improve battery and ram usage?
I will just install your kernel through cwm and if I got problem regarding the data2sd, I will just ask question from you.
Thank you
Click to expand...
Click to collapse
Maybe in battery less consume with smartassV2+sio 156-312freq uv -80mV.. but dont know bout ram management coz in my rom only 105-115 in first booting..
savie said:
Maybe in battery less consume with smartassV2+sio 156-312freq uv -80mV.. but dont know bout ram management coz in my rom only 105-115 in first booting..
Click to expand...
Click to collapse
Sir Savie i have already prepared the back up files for tomorrow I will gonna be installing your kernel. Sir please forgive me I have to ask this noob question? What do you mean by the SGYbiCWM.zip in your previous response below
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Sir I have downloaded your #60REV2 and #73REV and check it, i can find the SGYbicCWM.zip.
Also Sir Savie may I ask again, If I would be using a custom rom and your kernel, will this procedure be the best in order to avoid problems.
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel.
Sir hoping for your response and please forgive me If I have so many questions. Thank you for your support
ariszon said:
Sir Savie i have already prepared the back up files for tomorrow I will gonna be installing your kernel. Sir please forgive me I have to ask this noob question? What do you mean by the SGYbiCWM.zip in your previous response below
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Sir I have downloaded your #60REV2 and #73REV and check it, i can find the SGYbicCWM.zip.
Also Sir Savie may I ask again, If I would be using a custom rom and your kernel, will this procedure be the best in order to avoid problems.
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel.
Sir hoping for your response and please forgive me If I have so many questions. Thank you for your support
Click to expand...
Click to collapse
SGYbiCWM.zip is kernel flasher tools method from mai77 u can search coz its old thread but very usefull.. But my kernel is zip package and include that tools so u dont need it again but its very usefull tools if u wanna flash only boot.img file in /sdcard
Nandroid backup is must to reduce something bad.. Yupz u can use that method to install my kernel.. if u dont use custom rom.. after install stock rom u must root ur device then create /system/etc/init.d folder with rootexplorer application or similiar like that application..
Hope u understand with my bad english..
Enjoy ur experience to playing android.. dont worry with bootloop or softbrick coz we are here to help each other..
savie said:
SGYbiCWM.zip is kernel flasher tools method from mai77 u can search coz its old thread but very usefull.. But my kernel is zip package and include that tools so u dont need it again but its very usefull tools if u wanna flash only boot.img file in /sdcard
Nandroid backup is must to reduce something bad.. Yupz u can use that method to install my kernel.. if u dont use custom rom.. after install stock rom u must root ur device then create /system/etc/init.d folder with rootexplorer application or similiar like that application..
Hope u understand with my bad english..
Enjoy ur experience to playing android.. dont worry with bootloop or softbrick coz we are here to help each other..
Click to expand...
Click to collapse
Thank you Sir Savie now I got. That mai77, I already got it before when I use the boot .img of Sir Kuro. Its good that I learned a lot from you Sir Savie
Sir I am now doing installation today. Sir please confirm the procedures below if I am doing it right provided I have all the back ups and nandroid back up. I will be installing a custom rom plus you kernel
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel using cwm.
Thank you for your usual support
If i use 2nd partition just format as ext3 dont use ext4/2 to safety in backup and restoring..
Thanks..
savie said:
If i use 2nd partition just format as ext3 dont use ext4/2 to safety in backup and restoring..
Thanks..
Click to expand...
Click to collapse
Good day!
Sir Savie, I have successfully installed you kernel #73REV together with rom Next to ICS by Avijit Ghosh82 in my SGY.
Sir I have some observations regarding your kernel and hoping for your comment or advise. Please see below.
1. When Installed your kernel, I followed everything on your thread wherein use CWM Skin 180, i mount the system, then do custom installation so I can add up other governors, other io scheds, bacem tweak, and all other items found in the custom installation window. Then began installing. After installation it displayed success but in the upper portion (I forgot the exact term) written with the count is displayed 0. Then after exiting the installation window it show up installation success savie in the CWM Skin 180 window. Then I reboot. After reboot, I checked the Settings and Info, in the kernel, it shows the old stock kernel. So i repeat the whole process again 2 times but still stock old kernel name display in the Settings.
What I did is that I do the whole process again but I do not mount the system in CWM. Then after installing and rebooting and checking again in the Settings, it showed up the the name of your kernel.
Sir Savie, is there any effect with what I did when I don't mount the system at CWM but it installed successfully and the name of your kernel appears in the Setting Menu- About the Phone menu? Please enlighten me.
2. Upon installation I noticed some of the governors and io sched in the CPU master is not showing up. So I read your thread again and see the something screw in #73REV kernel in you thread and followed step 2 installation wherein I downloaded and extracted the GovIO-tweak-1.zip then copy all the files in the modules then paste it on the /sdcard/.system-replacer/lib/modules/* then reboot. After I checked in CPU Master, there is some 3 or 4 governors lacking and io sched all are present.
Sir Savie, will there any problems arise if it lacks 3 or 4 governors?
3. Then I also notice in the main option of CPU Master is use max 312 min 156 then smartassv2 then tick the apply on boot then at the io sched I selected sio then apply. Whenever I shutdown then turn it on again, in the CPU Master it boot up the settings in the main menu i encoded which is max 312 min 156 then smartassv2 there i have no problem because CPU Master follows my setting. But in the io sched same scenario off then on SGY from my original setting sio it always choose deadline.
Sir Savie how can I make sio as the default selection whenever I turn off/on SGY?
4. In the CPU Master I dont see the option for changing the undervolting. Sir is it okay I I don't have the option for changing the volt and run the default volt in #73REV kernel which is -80mV?
5. I used Link 2sd because the data2sd of Sir Kuro doesn't work on your kernel then i link the CPU master in SD card. Sir Savie, will there be problems in terms of using the CPU Master when loading or changing governors or io sched?
Sir Savie my apologies If I have so many observation. Sir Savie hoping for your kind responses with my 5 questions.
Thank you
ariszon said:
Good day!
Sir Savie, I have successfully installed you kernel #73REV together with rom Next to ICS by Avijit Ghosh82 in my SGY.
Sir I have some observations regarding your kernel and hoping for your comment or advise. Please see below.
1. When Installed your kernel, I followed everything on your thread wherein use CWM Skin 180, i mount the system, then do custom installation so I can add up other governors, other io scheds, bacem tweak, and all other items found in the custom installation window. Then began installing. After installation it displayed success but in the upper portion (I forgot the exact term) written with the count is displayed 0. Then after exiting the installation window it show up installation success savie in the CWM Skin 180 window. Then I reboot. After reboot, I checked the Settings and Info, in the kernel, it shows the old stock kernel. So i repeat the whole process again 2 times but still stock old kernel name display in the Settings.
What I did is that I do the whole process again but I do not mount the system in CWM. Then after installing and rebooting and checking again in the Settings, it showed up the the name of your kernel.
Sir Savie, is there any effect with what I did when I don't mount the system at CWM but it installed successfully and the name of your kernel appears in the Setting Menu- About the Phone menu? Please enlighten me.
Click to expand...
Click to collapse
If u in 73rev so just make sure in recovery mode (cwm) u mount /system before install zip package like re-install savie73rev_kernel.zip..
Dont worry in count 0 coz its bugs from aroma..
To change other kernel put other kernel in /sdcard/boot.img then follow step in above but in custom installation choose other kernel..
2. Upon installation I noticed some of the governors and io sched in the CPU master is not showing up. So I read your thread again and see the something screw in #73REV kernel in you thread and followed step 2 installation wherein I downloaded and extracted the GovIO-tweak-1.zip then copy all the files in the modules then paste it on the /sdcard/.system-replacer/lib/modules/* then reboot. After I checked in CPU Master, there is some 3 or 4 governors lacking and io sched all are present.
Sir Savie, will there any problems arise if it lacks 3 or 4 governors?
Click to expand...
Click to collapse
Yupz if im not wrong lulzactive, ondemandx, etc..
3. Then I also notice in the main option of CPU Master is use max 312 min 156 then smartassv2 then tick the apply on boot then at the io sched I selected sio then apply. Whenever I shutdown then turn it on again, in the CPU Master it boot up the settings in the main menu i encoded which is max 312 min 156 then smartassv2 there i have no problem because CPU Master follows my setting. But in the io sched same scenario off then on SGY from my original setting sio it always choose deadline.
Sir Savie how can I make sio as the default selection whenever I turn off/on SGY?
Click to expand...
Click to collapse
Go to setting in cpumaster then uncheck all..
4. In the CPU Master I dont see the option for changing the undervolting. Sir is it okay I I don't have the option for changing the volt and run the default volt in #73REV kernel which is -80mV?
Click to expand...
Click to collapse
I dont know is theres app to show voltage now.. just use voltage-info.zip u see ur voltage..
5. I used Link 2sd because the data2sd of Sir Kuro doesn't work on your kernel then i link the CPU master in SD card. Sir Savie, will there be problems in terms of using the CPU Master when loading or changing governors or io sched?
Click to expand...
Click to collapse
Nope, i use that too..
Sir Savie my apologies If I have so many observation. Sir Savie hoping for your kind responses with my 5 questions.
Thank you
Click to expand...
Click to collapse
Lol.. no problem as long i can.. sorry if my explanation confusing coz im bad in english..
I am using a GT-S5360T which is Telecom NZ version of Galaxy Y. I seem to be able to install most custom roms released for GT-S5360 fine, but. When using whitexp kernal with stock rom or latest cm7 release I have a green fuzz when accessing camera app. I see other threads with similar problem but nothing pertaining to my particular model.
I have two questions;
1. Is this because my model has the " T " at the end?
2. How can I fix this?
If some one could point me in the right direction I would greatly appreciate it.
well,
for the reason why it has that green fuzz i have exactly no idea since im not the developer of the kernel,
however,
try to use another kernel besides white's kernel,
or contact the dev or post in his kernel thread for further info
this post is approved by the national potato safety regulation
Thanks for reply. I would post there, but..
deathnotice01 said:
well,
for the reason why it has that green fuzz i have exactly no idea since im not the developer of the kernel,
however,
try to use another kernel besides white's kernel,
or contact the dev or post in his kernel thread for further info
this post is approved by the national potato safety regulation
Click to expand...
Click to collapse
I get the " you do not have permission to access this page. This could be due to one of several reasons: " screen when I try to post in the kernel thread. I think cause I'm newbie.
I like this kernel because it boots fast, it has cwm and my boot animation and power on sound play properly. Everything else seems to work with it i.e. busy box, root browser, link2sd, superuser, sys app installer and beats audio drivers and all the standard apps that don't require rooting it is just the camera.
One thing that I can say is that your "T" isnt the cause for this. T just indicates your region, its fine to install any ROM/kernel based on S5360. You might need to contact whitexp for the solution..
I will try contact White..
hitme987 said:
One thing that I can say is that your "T" isnt the cause for this. T just indicates your region, its fine to install any ROM/kernel based on S5360. You might need to contact whitexp for the solution..
Click to expand...
Click to collapse
Thanks, now I know my model isn't the problem I will try contact White... I wonder if anyone else has had the same problem or if everyone else has the same problem, I see no mention of it being a bug.
with CM7, you can have this error
But not with Strock rom ..
I only use my kernel and a lot of other people also not ..
and nobody had this problem with stock rom or custom roms like Creeds, repencis etc.;;
Stock rom & white0.8.0RC3 flashed with Odin3 V1.85
whitexp said:
with CM7, you can have this error
But not with Strock rom ..
I only use my kernel and a lot of other people also not ..
and nobody had this problem with stock rom or custom roms like Creeds, repencis etc.;;
Click to expand...
Click to collapse
Phone S/N :RV1C5OM2X1X
Model :GT-S5360T
Purchase from Telecom store in May this year.
Stock Rom is from http://forum.xda-developers.com/showthread.php?t=1714872
Perhaps you know what I might be doing wrong?
its crazy try a new app (camerazoom or other )
or a new stock rom or a custom rom ...
if no work ... flash other kernel :/
GT-S5360B
whitexp said:
its crazy try a new app (camerazoom or other )
or a new stock rom or a custom rom ...
if no work ... flash other kernel :/
Click to expand...
Click to collapse
I can get Camera to work with your kernel by flashing the PDA and MODEM pieces of the Brazil GT-S5360B firmware before flashing the white.1.3.3 in Odin.
Only problem I have then is my phone doesn't know which way is up or down unless I turn off auto rotate. Then when I flash WhiteXP the WiFi stops working.
...WiFi is fixed with the driver in WiFi fix thread..> http://forum.xda-developers.com/showthread.php?t=2027326
Screen rotation
Does any body know how to fix the problem with the screen rotation?
..
I've tried searching for a fix to the "Android is Updating" on Every Boot problem with no avail.
I am rooted on stock and have tried to uninstall and reinstall TBP. This did not solve the problem. I read something about moving odex files around in the /data/app but there are only apk's
I have Currents, Earth, Magazine, iWnn, Picasa and Set-up Wizard frozen.
Have you run any scripts for "supercharging" or similar?
your dalvik is getting wiped on every boot. its either the rom, kernel, mod, or a root app that you enabled it in.
Did you have disabled/frozen apps then done a davlik cache clearance ?
if so try enabling them and maybe reset davlik again.
estallings15 said:
Have you run any scripts for "supercharging" or similar?
Click to expand...
Click to collapse
Nop
simms22 said:
your dalvik is getting wiped on every boot. its either the rom, kernel, mod, or a root app that you enabled it in.
Click to expand...
Click to collapse
That much I have gathered from looking around for a solution. Stock rom (rooted), 3.4.0-perft-ge039dcb kernal and I used the wugfresh toolkit for rooting
meangreenie said:
Did you have disabled/frozen apps then done a davlik cache clearance ?
if so try enabling them and maybe reset davlik again.
Click to expand...
Click to collapse
yup, and that didn't fix the issue
I have the same on my N4 and N7.
On the N4 I didn't freeze any application, on N7 Currents is frozen.
I am wondering whether this happens because I integrated sys Dalvik into ROM with Titanium Backup
Has anyone found a solution to this problem?
texaslittleangel said:
Has anyone found a solution to this problem?
Click to expand...
Click to collapse
yes. its either a mod that you flashed(sound mod, or a supercharger script, etc..), the kernel youre using, or a root app that you use, that has an option that you have enabled.
simms22 said:
yes. its either a mod that you flashed(sound mod, or a supercharger script, etc..), the kernel youre using, or a root app that you use, that has an option that you have enabled.
Click to expand...
Click to collapse
I haven't installed a sound mod. I don't think I have a supercharger script
I am using kernel 3.4.0-perf-g7ce11cd (if that says anything)
Root app?
Could you help break this down for me a bit more simms? I'm not a complete newb but let's just say I am FAR from being a pro lol
texaslittleangel said:
I haven't installed a sound mod. I don't think I have a supercharger script
I am using kernel 3.4.0-perf-g7ce11cd (if that says anything)
Root app?
Could you help break this down for me a bit more simms? I'm not a complete newb but let's just say I am FAR from being a pro lol
Click to expand...
Click to collapse
do you have a root file explorer? look to see if you have an /etc/init.d/ folder.. are there any files in it?
simms22 said:
do you have a root file explorer? look to see if you have an /etc/init.d/ folder.. are there any files in it?
Click to expand...
Click to collapse
only init.goldfish.sh and init.mako.bt.sh
texaslittleangel said:
only init.goldfish.sh and init.mako.bt.sh
Click to expand...
Click to collapse
na, i was looking for an init.d folder. that means its not a script that was set into that folder. is it a custom kernel that you are using, or just the stock kernel that comes with the stock rom? do you use anykind of root only apps that have multitudes of options to change things around? are you willing to try another rom or kernel?
simms22 said:
na, i was looking for an init.d folder. that means its not a script that was set into that folder. is it a custom kernel that you are using, or just the stock kernel that comes with the stock rom? do you use anykind of root only apps that have multitudes of options to change things around? are you willing to try another rom or kernel?
Click to expand...
Click to collapse
Kernel is custom i believe.
Root only apps? Yes, TB is one of them (which I uninstalled to see if that was causing the problem). ROM Manager (which I just uninstalled as well), BusyBox, SuperSU and Online Nandroid.
Rooted but stock, no custom ROM. I don't mind trying out a new ROM and kernel if that is going to solve the annoying issue
texaslittleangel said:
Kernel is custom i believe.
Root only apps? Yes, TB is one of them (which I uninstalled to see if that was causing the problem). ROM Manager (which I just uninstalled as well), BusyBox, SuperSU and Online Nandroid.
Rooted but stock, no custom ROM. I don't mind trying out a new ROM and kernel if that is going to solve the annoying issue
Click to expand...
Click to collapse
rom manager has such an option(wipe dalvik) i believe.
1. you can try to factory reset, then reboot after booted up, before installing any apps(make a nandroid backup in your recovery first, so you can restore it if needed).
2. try a different kernel. if still happening, try a different rom.
3. rom manager is one of my most hated apps :angel:
simms22 said:
rom manager has such an option(wipe dalvik) i believe.
1. you can try to factory reset, then reboot after booted up, before installing any apps(make a nandroid backup in your recovery first, so you can restore it if needed).
2. try a different kernel. if still happening, try a different rom.
3. rom manager is one of my most hated apps :angel:
Click to expand...
Click to collapse
I did a couple of factory resets a few months ago when I was having camera/gallery issues. I had no apps installed (aside from those that came with the phone) and was getting the annoying "android is upgrading" message.
I've read good things about the Franco Kernel and found this site with a few options but I am not sure which one to flash. Any suggestions?
I've learned to dislike it myself and hence why I just uninstalled it a few
texaslittleangel said:
I did a couple of factory resets a few months ago when I was having camera/gallery issues. I had no apps installed (aside from those that came with the phone) and was getting the annoying "android is upgrading" message.
I've read good things about the Franco Kernel and found this site with a few options but I am not sure which one to flash. Any suggestions?
I've learned to dislike it myself and hence why I just uninstalled it a few
Click to expand...
Click to collapse
franco kernel is good, personally i use trinity kernel.
---------- Post added at 07:18 PM ---------- Previous post was at 06:51 PM ----------
texaslittleangel said:
I did a couple of factory resets a few months ago when I was having camera/gallery issues. I had no apps installed (aside from those that came with the phone) and was getting the annoying "android is upgrading" message.
I've read good things about the Franco Kernel and found this site with a few options but I am not sure which one to flash. Any suggestions?
I've learned to dislike it myself and hence why I just uninstalled it a few
Click to expand...
Click to collapse
ok, so if its doing it, without any app installed, nor rom manager, and the rom is completely stock, then the chances are that its the kernel. btw, i highly recommend the rasbean jelly rom. its very clean, with only added mods(not everything plus the kitchen sink), and very highly praised by many. if you want a stock experience, with a few additions, rasbean is great.
simms22 said:
franco kernel is good, personally i use trinity kernel.
What's the difference between the two?
---------- Post added at 07:18 PM ---------- Previous post was at 06:51 PM ----------
ok, so if its doing it, without any app installed, nor rom manager, and the rom is completely stock, then the chances are that its the kernel. btw, i highly recommend the rasbean jelly rom. its very clean, with only added mods(not everything plus the kitchen sink), and very highly praised by many. if you want a stock experience, with a few additions, rasbean is great.
Click to expand...
Click to collapse
I've actually enjoyed stock on my Nexus (I can't say the same about the other phones I've had lol). What you describe for rasbean sounds tempting!! is it on the list of ROMs?
texaslittleangel said:
I've actually enjoyed stock on my Nexus (I can't say the same about the other phones I've had lol). What you describe for rasbean sounds tempting!! is it on the list of ROMs?
Click to expand...
Click to collapse
he has a pure android open source build up too, without any mods, with a few optimizations, called rasvanilla, built with the latest code. he describes the 3 different builds in his op. i prefer rasbean jelly http://forum.xda-developers.com/showthread.php?t=2028025
simms22 said:
he has a pure android open source build up too, without any mods, with a few optimizations, called rasvanilla, built with the latest code. he describes the 3 different builds in his op. i prefer rasbean jelly http://forum.xda-developers.com/showthread.php?t=2028025
Click to expand...
Click to collapse
Simms, I tried to download but the page it took me to comes out blank (no link, no info, nada)
EDIT: got it
So guys, I'm developing a ROM but when I flash it the phone lost the root acess. How can I keep it? There's is a way to inject the SU?
Just download the update.zip file for your device
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
TomalinSGY said:
Just download the update.zip file for your device
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
Click to expand...
Click to collapse
But I want to people use my ROM, others custom ROMs maintain the root acess...
eduds said:
But I want to people use my ROM, others custom ROMs maintain the root acess...
Click to expand...
Click to collapse
Oh. I think you should put the su in system/app folder in your rom. Sorry, I don't have enough knowledge about that. Im a noob here
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
TomalinSGY said:
Oh. I think you should put the su in system/app folder in your rom. Sorry, I don't have enough knowledge about that. Im a noob here
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
Click to expand...
Click to collapse
I thought about it but do not know if it's enough. Anyway, thank you!
Look what's inside update.zip or similar zip and copy its content to the same location in your custom ROM
Sent from my GT-S5360
study the root access,
how it executes and how it runs,
eduds said:
I thought about it but do not know if it's enough. Anyway, thank you!
Click to expand...
Click to collapse
No problem. Just press the thanks button if I helped :beer: Additional answer: Find the update.zip(or the file needed to root your device) then you can find inside it the superuser app and three files. (I don't know what's the file format ) I think, in my opinion, you can put that in your rom. But be sure it's a zip file. I checked my update.zip file and I had found that files
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
TomalinSGY said:
No problem. Just press the thanks button if I helped :beer: Additional answer: Find the update.zip(or the file needed to root your device) then you can find inside it the superuser app and three files. (I don't know what's the file format ) I think, in my opinion, you can put that in your rom. But be sure it's a zip file. I checked my update.zip file and I had found that files
Sent from my Samsung Galaxy Y
Creeds Rom- Hells Fusion #50
Click to expand...
Click to collapse
If I do it the updater-script will be changed, i.d. the commands to flash the ROM will be changed and it'll not install, just the root acess will.
I'm thinking... if I put the commands the updater-script together?
Anyway, I'll study more.
eduds said:
If I do it the updater-script will be changed, i.d. the commands to flash the ROM will be changed and it'll not install, just the root acess will.
I'm thinking... if I put the commands the updater-script together?
Anyway, I'll study more.
Click to expand...
Click to collapse
Well, in that case I don't know how Sorry dude. But I guess you should study on how to put that just like in the other roms :beer: