at some point in the last 6 months or so, my phone lost the ability to connect to my computer- I've tested by uninstalling and reinstalling the USB drivers on my computer, using virtual drivers, etc. Everything I could- I even tested on other computers that it has worked on in the past. Nothing helps.
I then decided it must be on my phones end, so I went so far as to replace the USB connection board inside my phone and that doesnt even work.
I used to have my phone rooted, but that was lost at some point over a couple OTA updates-- Is there anyway I can restore root access on my device without using a USB connection, or does anyone have any ideas on how to fix the connection issue?
Thanks!
Did you check the cable?
krystyuc said:
Did you check the cable?
Click to expand...
Click to collapse
Multiple cables as well. I'd do that before replacing the board!
crazychris78 said:
Multiple cables as well. I'd do that before replacing the board!
Click to expand...
Click to collapse
Usb debugging enabled?
krystyuc said:
Usb debugging enabled?
Click to expand...
Click to collapse
Tried that as well. I've tried pretty much everything I can think of. the superuser app says it might be a kernal issue
crazychris78 said:
Tried that as well. I've tried pretty much everything I can think of. the superuser app says it might be a kernal issue
Click to expand...
Click to collapse
Try the following
1)Boot into booloader and check in device manager if the phone is detected if so then go flash-all.bat 4.4.3( will wipe your phone,new phone factory)
krystyuc said:
Try the following
1)Boot into booloader and check in device manager if the phone is detected if so then go flash-all.bat 4.4.3( will wipe your phone,new phone factory)
Click to expand...
Click to collapse
bootloader isn't recognized on my PC or any others, either
crazychris78 said:
bootloader isn't recognized on my PC or any others, either
Click to expand...
Click to collapse
Well,in that case...i don't know.Maybe you should go to a specialist.
Look for flashify, a app can flash recovery, once you have recovery, you can have root.
Sent from my Galaxy Nexus using Tapatalk
chongns said:
Look for flashify, a app can flash recovery, once you have recovery, you can have root.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Flashify requires root access
do you have a kernel with fast charge enabled? that disables PC data connection
crazychris78 said:
Flashify requires root access
Click to expand...
Click to collapse
please answer below question
1. what os use on your PC ?
2. do you install others driver beside google adb and fastboot?
3. what version of adb and fastboot you have if you have installed before
4. you said you have OTA udpate from gogole or form the ROM developer?
note:
you need to install latest adb and fastboot. latest version is .31
if you have other 2 or more driver installed before, it may crash or mis regonice the phone, like samsung and google driver for Galaxy nexus which i facing.
some help form external web here
I have same problem, i tried even on linux. What is worst i removed rom from sdcard and now my current rom crashed. When i try to pull new rom via adb, new file is created but is "empty". Usb otg doesn't work in recovery ;/
I am seeing the same thing also. I even bought a USB replacement part on ebay and installed it. The PC still doesn't see the device.
Related
Quick and possibly stupid question but is adb accessible in 2.1 when fully booted? I know in 1.5 it was but I can't seem to do it in 2.1 unless i'm in recovery.
cali310 said:
Quick and possibly stupid question but is adb accessible in 2.1 when fully booted? I know in 1.5 it was but I can't seem to do it in 2.1 unless i'm in recovery.
Click to expand...
Click to collapse
I'm far from an expert, but with USB debugging enabled I can adb to my phone with it fully booted...in fact, that's how I rooted it, lol.
I might be missing something though...like I said, I'm pretty much a newb.
cali310 said:
Quick and possibly stupid question but is adb accessible in 2.1 when fully booted? I know in 1.5 it was but I can't seem to do it in 2.1 unless i'm in recovery.
Click to expand...
Click to collapse
No problems here doing it.
You have to be connected using the choice HTC Sync when you plug the phone in. Then you have to wait a few seconds and then you should be able to use ADB
Leukay said:
You have to be connected using the choice HTC Sync when you plug the phone in. Then you have to wait a few seconds and then you should be able to use ADB
Click to expand...
Click to collapse
Actually the trick is NOT using htc sync. HTC sync also uses adb and you can't have multiple adb connections. So if you have htc sync running on your computer (even if you aren't currently connected to it) it's holding a connection to your phone and will prevent command line adb from working properly.
I tried all 4 settings when USB is connected and no luck w/ any of them.
cali310 said:
I tried all 4 settings when USB is connected and no luck w/ any of them.
Click to expand...
Click to collapse
Can you tell us what adb is telling you? To answer your original post... adb works perfectly fine in all flavors of 2.1. So there is something else going on.
That's the thing. It's not showing the device. If I do an adb devices it's not showing up unless i'm in recovery. Same thing when using fresh kitchen. I tried using it the other day to wipe the lock screen cache to install the invis one and that's when I discovered the prob.
That's the thing. The device isn't showing up. If I do an "adb devices" I get nothing unless i'm in recovery. Same thing w/ fresh kitchen. I went to use it the other day to wipe my lock screen cache and that's when I discovered the prob. It worked in recovery too.
Sounds like you are missing drivers. Are you running Win 7 by any chance?
Anyways, try this, it should help. Download PDAnet (google it for link) and install it. This will install correct drivers for you . Then it should work.
ccapasso said:
Sounds like you are missing drivers. Are you running Win 7 by any chance?
Anyways, try this, it should help. Download PDAnet (google it for link) and install it. This will install correct drivers for you . Then it should work.
Click to expand...
Click to collapse
I already have PDANet installed. It is the 1.12 version if that makes a difference. And yes, i'm running Win 7 64 bit. It was working fine w/ 1.5 so I don't think it's a driver issue.
This worked for me as well.....
jackal424 said:
I had a similar problem. I use Windows 7 Pro 64bit.
Here is what helped fix the issue:
http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
Click to expand...
Click to collapse
I'm using linux, and I used linux to root both of our Heros. Now, in linux I can't communicate with the phone through adb. It just doesn't see the phone. On the same computer I boot into windows and adb works fine.
What could be causing this?
One time, I had a bad USB cable. Only charged, and made no USB connection whatsoever (ADB, sdcard mount, etc.)
Before I mess w/ htcsync does one of the hero gurus around here think it is worth trying? As I said before I have no probs with adb in 1.5 when fully booted nor do I have a prob w/ it when in recovery (both 1.5 and 2.1) so I wouldn't think it's a driver issue. If i'm wrong let me know.
Also, which of the 4 USB settings do you select when the phone is plugged into the pc?
I had the exact same issue. I blogged about it here so I could show screenshots in context
http://sprintherotips.blogspot.com/2010/03/pc-connection-issue-windows-7-ultimate.html
cali310 said:
Before I mess w/ htcsync does one of the hero gurus around here think it is worth trying? As I said before I have no probs with adb in 1.5 when fully booted nor do I have a prob w/ it when in recovery (both 1.5 and 2.1) so I wouldn't think it's a driver issue. If i'm wrong let me know.
Also, which of the 4 USB settings do you select when the phone is plugged into the pc?
Click to expand...
Click to collapse
charge only.
Updated the drivers and the sdk and now I can adb in. Thanks a lot ro_bro and everyone else. It only works for me in htcsync mode. It searches for htcsync for like 30 secs then lets me cancel. Charge only doesn't work. I assume something else is screwed up.
As I was running the P.A.C. Man ROM with nightlies, I installed the most recent update at the time, the "pac_mako-nightly-20130722.zip". I have been dirty flashing all the nightlies without any problems, until this morning. I installed the new nightly from TWRP, then wiped the dalvik and cache, and then rebooted the system, but when the phone started up again, I got an SD card error - I cannot view any of the contents of my SD card from ES File Explorer or anything and I cannot open or find any of them (picture, music, etc.) from anywhere.
From the file manager in TWRP, I can see that all the files are still there, but the SD card that is been seen everywhere else is a completely different one. If I plug my phone into my computer, the SD card shows up as a "generic hierarchical" with no contents.
Another thing, I cannot access the internet in anyway anymore. The wifi is stuck on "Turning wifi on..." and my SIM card is getting no response ("No Service") - if I remove my SIM card, my phone doesn't do anything either.
I already tried a factory reset to no avail. Nothing I do is working and right now my phone is pretty much stuck in a state of uselessness. I can start it up and it will load normally, but once loaded, there are errors - wifi stuck on "Turning on," no service, SD card is unreadable, and I can't transfer any files from my computer to my phone because it shows up as a "generic hierarchical" SD card.
What do I do?
Wipe system, data, cache and dalvik. Start fresh, reflash ROM. Might help.
Sent from my Nexus 4 using Tapatalk 4 Beta
ridikolous said:
Wipe system, data, cache and dalvik. Start fresh, reflash ROM. Might help.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I've done all of that twice now, but still it doesn't work.
Try a different ROM. Or return your phone back to stock. There is a guide somewhere.
Sent from my Nexus 4 using Tapatalk 4 Beta
roll back to earlier nightly. 721 cm side issues
ziddey said:
roll back to earlier nightly. 721 cm side issues
Click to expand...
Click to collapse
How can I do that?
NexusAndroid4 said:
How can I do that?
Click to expand...
Click to collapse
adb push or sideload an earlier ROM zip to your phone, or restore your backup.
NexusAndroid4 said:
How can I do that?
Click to expand...
Click to collapse
by flashing an older nightly...?
ziddey said:
by flashing an older nightly...?
Click to expand...
Click to collapse
I deleted my old nightlies to clear up space on my SD card... Does that ruin everything?
NexusAndroid4 said:
I deleted my old nightlies to clear up space on my SD card... Does that ruin everything?
Click to expand...
Click to collapse
No, adb push or adb sideload a different ROM zip, done.
NexusAndroid4 said:
I deleted my old nightlies to clear up space on my SD card... Does that ruin everything?
Click to expand...
Click to collapse
time to buy a new phone
CMNein said:
No, adb push or adb sideload a different ROM zip, done.
Click to expand...
Click to collapse
I downloaded the 07/21 file and the sdk. I'm trying to adb sideload in TWRP but I get the error:device not found - adb devices lists no serial number in TWRP. My device's serial number shows up in the Android OS but not in TWRP. What do I do?
Install the adb drivers again with your phone in recovery and connected and try again.
Sent from my Nexus 4 using Tapatalk 4 Beta
CMNein said:
Install the adb drivers again with your phone in recovery and connected and try again.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I believe I've done this reinstalling and it still failed, but could you tell me how?
NexusAndroid4 said:
I believe I've done this reinstalling and it still failed, but could you tell me how?
Click to expand...
Click to collapse
How to install the drivers?
Check if anything is showing up under your cpu's device manager when your phone is connected in recovery. Right click on that device, go to driver tab, select update driver, and then select the path to where you put the drivers you DL'd.
CMNein said:
How to install the drivers?
Check if anything is showing up under your cpu's device manager when your phone is connected in recovery. Right click on that device, go to driver tab, select update driver, and then select the path to where you put the drivers you DL'd.
Click to expand...
Click to collapse
In Device Manager, my phone shows up as "mako." When I try to update from the path of the AndroidSDK in recovery mode, I get an error.
You're pointing it all the way to the sub folder the drivers are in? It's extras/Google/USB drivers or something similar.
Sent from my Nexus 4 using Tapatalk 4 Beta
CMNein said:
You're pointing it all the way to the sub folder the drivers are in? It's extras/Google/USB drivers or something similar.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yes:
C:\...\sdk\extras\google\usb_driver
NexusAndroid4 said:
Yes:
C:\...\sdk\extras\google\usb_driver
Click to expand...
Click to collapse
When your phone is booted is it showing up as "online" or "offline" when you do adb devices?
How old are the drivers you have? Might have to update them. The SE Linux code that broke wireless, etc... didn't affect adb. You're just going to have to mess around until you can get your cpu to recognize your phone while you're in recovery. That's all I got.
CMNein said:
When your phone is booted is it showing up as "online" or "offline" when you do adb devices?
How old are the drivers you have? Might have to update them. The SE Linux code that broke wireless, etc... didn't affect adb. You're just going to have to mess around until you can get your cpu to recognize your phone while you're in recovery. That's all I got.
Click to expand...
Click to collapse
Nothing shows up at all with adb devices. When I do adb devices in the normal Android OS, it works, but not in recovery. I installed the SDK today so that shouldn't be the problem.
Hey, so today I wanted to install a new ROM on my SM-N900 Note 3. I flashed TWRP, and rebooted. Then I booted into TWRP and opened Android File transfer on my Mac. It kept saying please connect USB device. Other parts of the system do not read the device, however TWRP says the device is charging from my Mac's USB port. I moved to my Windows computer and connected the device. Still nothing. I tried multiple USB cables both 2.0 and 3.0. Nothing works! Can someone help me? I have no OS installed! I don't want to use ODIN or download mode because I would prefer to the install the ROM I'm trying to install because it seems silly that I have recovery access but can't access the file transfer.
Thanks, Justin
No SD Card?
justinxfan said:
Hey, so today I wanted to install a new ROM on my SM-N900 Note 3. I flashed TWRP, and rebooted. Then I booted into TWRP and opened Android File transfer on my Mac. It kept saying please connect USB device. Other parts of the system do not read the device, however TWRP says the device is charging from my Mac's USB port. I moved to my Windows computer and connected the device. Still nothing. I tried multiple USB cables both 2.0 and 3.0. Nothing works! Can someone help me? I have no OS installed! I don't want to use ODIN or download mode because I would prefer to the install the ROM I'm trying to install because it seems silly that I have recovery access but can't access the file transfer.
Thanks, Justin
Click to expand...
Click to collapse
via PC, Odin is the easiest way.
va Mobile, Recovery + ROM in SD card is the easiest way.
nijom said:
via PC, Odin is the easiest way.
va Mobile, Recovery + ROM in SD card is the easiest way.
Click to expand...
Click to collapse
I've used ODIN before but I had thought was incompatible with zips. I'll try it today though. And no, I don't have an SD card. I'm trying to move the files into my internal storage.
Thanks, Justin.
MTP doesn't work with TWRP. You'll have to use adb and push the zip to your internal storage. Then flash it through TWRP.
There are many guides on how to do this, it is very simple. Good luck
Edit- i see you're using a mac, not sure if adb works on there.. never tried myself.. always installed linux on any apple product i've owned
I haven't researched it so it might work straight away, but if not just create a vm with xp, ubuntu or something and use adb through there
Sent from my SM-N9005 using Tapatalk
celderic said:
MTP doesn't work with TWRP. You'll have to use adb and push the zip to your internal storage. Then flash it through TWRP.
There are many guides on how to do this, it is very simple. Good luck
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
That's strange, I'm pretty sure my old Nexus 7 could do this. Oh well.
Code:
adb devices
does not work. It doesn't show the device in recovery. File transfer and ADB only work while the OS is booted up.
justinxfan said:
That's strange, I'm pretty sure my old Nexus 7 could do this. Oh well.
Click to expand...
Click to collapse
Same with my old S2
It's a bug with TWRP for the n9005, i posted in the thread 4 or 5 months ago.
Sorry i've just finished work, will be back in an hour or two.
I thiught there was an ADB button in TWRP?
Sent from my SM-N9005 using Tapatalk
celderic said:
Same with my old S2
It's a bug with TWRP for the n9005, i posted in the thread 4 or 5 months ago.
Sorry i've just finished work, will be back in an hour or two.
I thiught there was an ADB button in TWRP?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
There's a button in TWRP called disable MTP or enable MTP. It has no effect. I cannot find any sign of a ADB button.
justinxfan said:
There's a button in TWRP called disable MTP or enable MTP. It has no effect. I cannot find any sign of a ADB button.
Click to expand...
Click to collapse
ADB sideload, under the advanced tab.
https://twrp.me/faq/ADBSideload.html
I just looked myself and it is there.. if there's a way of taking screenshots in recovery, somebody let me know and i'll post a pic here
Sent from my SM-N9005 using Tapatalk
Ahhh I've seen that button before. Didn't jnowbwhat it did so I didn't touch it. Now that I understand it, I'll give it a try.
Sent from my SM-N900 using XDA Free mobile app
justinxfan said:
Ahhh I've seen that button before. Didn't jnowbwhat it did so I didn't touch it. Now that I understand it, I'll give it a try.
Sent from my SM-N900 using XDA Free mobile app
Click to expand...
Click to collapse
Good luck! Let me know if you run into any problems.
Sent from my SM-N9005 using Tapatalk
Nope. Not working. Started ADB sideload from TWRP and tried to push in a random zip from my computer (about 2 mb). it said error: device not found.
bump
Someone can clarify this?
hey guys not sure if this is the right place for this but i was wondering if someone can hlep me out.
in an attempt to trouble shoot why i had no connectivity i reflashed the phone. sys data cache and all. dont remember what i tried to update, but the phone reboot into twrp and now is stuck in a twrp bootloop. i can get into download mode... but my pc cant see the device. i tried to install adb and the drivers... but the device still wont pick up. i dont know how to skip the twrp update to get into the OS.
N910W8VLU1ANJ3
any advice?
ryecola said:
hey guys not sure if this is the right place for this but i was wondering if someone can hlep me out.
in an attempt to trouble shoot why i had no connectivity i reflashed the phone. sys data cache and all. dont remember what i tried to update, but the phone reboot into twrp and now is stuck in a twrp bootloop. i can get into download mode... but my pc cant see the device. i tried to install adb and the drivers... but the device still wont pick up. i dont know how to skip the twrp update to get into the OS.
N910W8VLU1ANJ3
any advice?
Click to expand...
Click to collapse
First thing I'd do is remove the ADB drivers. Install kies is the simplest way to have proper drivers. You must put this fw on by Odin so if your phone doesn't connect in download mode, that's your issue.
Connect Odin
Flash new fw
Flash rom
Rejoice
Sent from my SM-N910W8 using Tapatalk
I would check the cable first. I've had tons of bad cables cause that problem
Sent from my SM-N910T using Tapatalk
Pick_A_Name said:
I would check the cable first. I've had tons of bad cables cause that problem
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
no kidding. it has to be a normal usb 2 cable a none powered usb port.
i was using the original fast charge usb cable, clearly that was a mistake.
anywho its at 6% hopefully this goes through and i can initialize the device.
oh since i have you guys is there any reason why my data only connects when wifi is connected?
i tried a variety of things and i cant seem to get thing to get service.
i have a ! by the rogers indicator.
it seems to work with my s4 just fine.
I have the XT720 version of the le pro 3 I have the following issues:
1. My phone charges to 100% but whenever I shut it off for the night and turn it on in the morning the battery always less by about 30%
2. I'm able to charge the device and use ADB but my computer's can't mount the phone as removable storage. I always get a device not recognized message in Windows.
If anyone has a solution for these issues I'd really appreciate the help
Have you installed USB drivers.
On your battery stats what is draining your battery.
Sent from my LEX727 using xda premium
And which rom are you using?
mchlbenner said:
Have you installed USB drivers.
On your battery stats what is draining your battery.
Click to expand...
Click to collapse
That's the thing when the phone is on nothing drain's it. The issue with the battery drain only occurs when the phone is completely off
Palm Trees said:
And which rom are you using?
Click to expand...
Click to collapse
The unofficial version of paranoid but the issues occurs on all roms even stock
Your device not being recognised by your computer: Sounds like a usb driver issue.
Try reinstalling the Google USB driver, and while you are at it, check to make sure that you ADB is up to date as well.
Theres is an easy way to do this quickly: @mauronofrio built an excellent tool that does all kinds of stuff including: keeping your drivers and adb up to date. Plus, it will give ADB system wide privileges.
Its called : TOOL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
Get it here: https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
* If your issue is related to drivers or software on the windows side, the updates may resolve the issue.
* Just make sure to give the software Firewall privileges, so it can check for updates.
* Have you tried using another USB C cable?
* Do you have an OTG drive? If so does it work?
* Is quick charge working?
tsongming said:
Your device not being recognised by your computer: Sounds like a usb driver issue.
Try reinstalling the Google USB driver, and while you are at it, check to make sure that you ADB is up to date as well.
Theres is an easy way to do this quickly: @mauronofrio built an excellent tool that does all kinds of stuff including: keeping your drivers and adb up to date. Plus, it will give ADB system wide privileges.
Its called : TOOL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
Get it here: https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
* If your issue is related to drivers or software on the windows side, the updates may resolve the issue.
* Just make sure to give the software Firewall privileges, so it can check for updates.
* Have you tried using another USB C cable?
* Do you have an OTG drive? If so does it work?
* Is quick charge working?
Click to expand...
Click to collapse
Yes quick charge works ADB works ( I used the tool you mentioned above already) charging the phone through PC also works. But when I select the mtp option the storage doesn't show in my PC. And I have no idea why the phone battery drain's when the phone is completely off. I searched for others that might have the same issue but didn't find anything.
Oka I have a idea.
On couple rom I have flashed I have had problems connecting to computer.
Try this
I will take that your rooted.
When trying to connect to computer undo debugging in your development setting.
Sent from my LEX727 using xda premium
mchlbenner said:
Oka I have a idea.
On couple rom I have flashed I have had problems connecting to computer.
Try this
I will take that your rooted.
When trying to connect to computer undo debugging in your development setting.
Click to expand...
Click to collapse
Thanks for the tip at first it wasn't working so I used revo uninstaller to remove all the drivers and reinstalled the Google one again. Quick question is there a cable /cable and charger brand you can recommend for the le pro 3? Because on the leeco cable my phone isn't always recognized on my computer and the other cable I have is from the ulefone t1. That's the one that works but I'm selling the phone so. I'm going to need a new USB cable
Restored back to stock then that should fix it.
Sent from my LEX727 using xda premium
mchlbenner said:
Restored back to stock then that should fix it.
Click to expand...
Click to collapse
Any particular method or qfi file you recommend. Because the qfi file I used didn't fix it
andrew2401 said:
Any particular method or qfi file you recommend. Because the qfi file I used didn't fix it
Click to expand...
Click to collapse
No qfi at all you can sell this phone not stock in this case it will put a value.one it.
I personal have sold root phones and put extra value on it.
Keep in mind their is no official support for it.
Sent from my LEX727 using xda premium
mchlbenner said:
No qfi at all you can sell this phone not stock in this case it will put a value.one it.
I personal have sold root phones and put extra value on it.
Keep in mind their is no official support for it.
Click to expand...
Click to collapse
How did you manage to restore your phone to stock
andrew2401 said:
How did you manage to restore your phone to stock
Click to expand...
Click to collapse
First just make sure yours is 727.
Their is a twrp 21s back then just flash stock recovery your stock again.
Personally I would leave custom ROM on it.
Sent from my LEX727 using xda premium
mchlbenner said:
First just make sure yours is 727.
Their is a twrp 21s back then just flash stock recovery your stock again.
Personally I would leave custom ROM on it.
Click to expand...
Click to collapse
I have the xt720 variant unfortunately
andrew2401 said:
I have the xt720 variant unfortunately
Click to expand...
Click to collapse
Just sell with custom ROM I seem many sell on eBay that way.
Sent from my LEX727 using xda premium
andrew2401 said:
I have the xt720 variant unfortunately
Click to expand...
Click to collapse
In regard to your cable question, I bouught these realy nice cables for only $15 ( and it is a 4pack!) :
https://www.amazon.com/ONSON-Braide...49579&sr=1-1-spons&keywords=Onson+usb+c&psc=1 The quality is extremely good they are thickly braided and the cables come with a 12 month warranty.
One last suggestion. Have you tried everything we have mentioned, But, in a different Admin user? it is still possible that the issue is with your PC and corruption.
If you still have tried another user or computer. Sell it as it is , rooted with a custom Rom as MclBenner suggested. Theres alot of people who are too intimidated to try rooting or learning how to install a custom Rom on their own and they will certainly pay close to full retail value , maybe more.
Good Luck!
tsongming said:
In regard to your cable question, I bouught these realy nice cables for only $15 ( and it is a 4pack!) :
https://www.amazon.com/ONSON-Braide...49579&sr=1-1-spons&keywords=Onson+usb+c&psc=1 The quality is extremely good they are thickly braided and the cables come with a 12 month warranty.
One last suggestion. Have you tried everything we have mentioned, But, in a different Admin user? it is still possible that the issue is with your PC and corruption.
If you still have tried another user or computer. Sell it as it is , rooted with a custom Rom as MclBenner suggested. Theres alot of people who are too intimidated to try rooting or learning how to install a custom Rom on their own and they will certainly pay close to full retail value , maybe more.
Good Luck!
Click to expand...
Click to collapse
Thanks