Quick and possibly stupid question but is adb accessible in 2.1 when fully booted? I know in 1.5 it was but I can't seem to do it in 2.1 unless i'm in recovery.
cali310 said:
Quick and possibly stupid question but is adb accessible in 2.1 when fully booted? I know in 1.5 it was but I can't seem to do it in 2.1 unless i'm in recovery.
Click to expand...
Click to collapse
I'm far from an expert, but with USB debugging enabled I can adb to my phone with it fully booted...in fact, that's how I rooted it, lol.
I might be missing something though...like I said, I'm pretty much a newb.
cali310 said:
Quick and possibly stupid question but is adb accessible in 2.1 when fully booted? I know in 1.5 it was but I can't seem to do it in 2.1 unless i'm in recovery.
Click to expand...
Click to collapse
No problems here doing it.
You have to be connected using the choice HTC Sync when you plug the phone in. Then you have to wait a few seconds and then you should be able to use ADB
Leukay said:
You have to be connected using the choice HTC Sync when you plug the phone in. Then you have to wait a few seconds and then you should be able to use ADB
Click to expand...
Click to collapse
Actually the trick is NOT using htc sync. HTC sync also uses adb and you can't have multiple adb connections. So if you have htc sync running on your computer (even if you aren't currently connected to it) it's holding a connection to your phone and will prevent command line adb from working properly.
I tried all 4 settings when USB is connected and no luck w/ any of them.
cali310 said:
I tried all 4 settings when USB is connected and no luck w/ any of them.
Click to expand...
Click to collapse
Can you tell us what adb is telling you? To answer your original post... adb works perfectly fine in all flavors of 2.1. So there is something else going on.
That's the thing. It's not showing the device. If I do an adb devices it's not showing up unless i'm in recovery. Same thing when using fresh kitchen. I tried using it the other day to wipe the lock screen cache to install the invis one and that's when I discovered the prob.
That's the thing. The device isn't showing up. If I do an "adb devices" I get nothing unless i'm in recovery. Same thing w/ fresh kitchen. I went to use it the other day to wipe my lock screen cache and that's when I discovered the prob. It worked in recovery too.
Sounds like you are missing drivers. Are you running Win 7 by any chance?
Anyways, try this, it should help. Download PDAnet (google it for link) and install it. This will install correct drivers for you . Then it should work.
ccapasso said:
Sounds like you are missing drivers. Are you running Win 7 by any chance?
Anyways, try this, it should help. Download PDAnet (google it for link) and install it. This will install correct drivers for you . Then it should work.
Click to expand...
Click to collapse
I already have PDANet installed. It is the 1.12 version if that makes a difference. And yes, i'm running Win 7 64 bit. It was working fine w/ 1.5 so I don't think it's a driver issue.
This worked for me as well.....
jackal424 said:
I had a similar problem. I use Windows 7 Pro 64bit.
Here is what helped fix the issue:
http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
Click to expand...
Click to collapse
I'm using linux, and I used linux to root both of our Heros. Now, in linux I can't communicate with the phone through adb. It just doesn't see the phone. On the same computer I boot into windows and adb works fine.
What could be causing this?
One time, I had a bad USB cable. Only charged, and made no USB connection whatsoever (ADB, sdcard mount, etc.)
Before I mess w/ htcsync does one of the hero gurus around here think it is worth trying? As I said before I have no probs with adb in 1.5 when fully booted nor do I have a prob w/ it when in recovery (both 1.5 and 2.1) so I wouldn't think it's a driver issue. If i'm wrong let me know.
Also, which of the 4 USB settings do you select when the phone is plugged into the pc?
I had the exact same issue. I blogged about it here so I could show screenshots in context
http://sprintherotips.blogspot.com/2010/03/pc-connection-issue-windows-7-ultimate.html
cali310 said:
Before I mess w/ htcsync does one of the hero gurus around here think it is worth trying? As I said before I have no probs with adb in 1.5 when fully booted nor do I have a prob w/ it when in recovery (both 1.5 and 2.1) so I wouldn't think it's a driver issue. If i'm wrong let me know.
Also, which of the 4 USB settings do you select when the phone is plugged into the pc?
Click to expand...
Click to collapse
charge only.
Updated the drivers and the sdk and now I can adb in. Thanks a lot ro_bro and everyone else. It only works for me in htcsync mode. It searches for htcsync for like 30 secs then lets me cancel. Charge only doesn't work. I assume something else is screwed up.
Related
Ok, so I am trying to root this new Incredible, and I thought I had it working, but nothing could get superuser privileges, so I reset to factory defaults to start from scratch. When I go into recovery mode, windows is seeing my phone as 2 "HTC Android Phone USB Device"'s. I know it's some sort of driver problem, but it's not letting me into ADB because of it. I tried on my laptop, and it sees a "Android 1.0 Device" and I can't seem for find a proper driver on that system. Both are Win7, Main is 64 bit, laptop is 32 bit. Anyone have any ideas? This is sooo frustrating.....
Did you read the howto sticky in this forum and the wiki?
Sent from my ADR6300 using XDA App
GMK83 said:
Did you read the howto sticky in this forum and the wiki?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
ive had the same issue.
i cant get adb to recognize my phone after installing the hboot driver. i had the HTC sync installed in order to root my phone. i uninstalled it before installing the hboot driver but when i try to connect my phone adb doesnt recognize it.
Thread moved to General.
tech9ne said:
ive had the same issue.
i cant get adb to recognize my phone after installing the hboot driver. i had the HTC sync installed in order to root my phone. i uninstalled it before installing the hboot driver but when i try to connect my phone adb doesnt recognize it.
Click to expand...
Click to collapse
The WIKI is down. The biggest problem is trying to uninstall the drivers that are currently there. I can't get windows to let me re-install them. I tried in linux as someone suggested somewhere, but adb isn't seeing the phone I guess......
Have done done searching, but still can't get my phone to connect to my computer. I've tried everything that I've found posted. Doesn't mean I found then all.
I get "usb device not recognized" when I plug on my phone. I'm trying to flash the modem to get my text messaging to work. Windows 7 64bit
DL30 black hole 4.1
Any help would be appreciated.
Sent from my SCH-I500 using XDA App
As most people would say, wrong place. This is a question that belongs in the general section.
Did you install the samsung driver onto your computer?
Kaze105 said:
As most people would say, wrong place. This is a question that belongs in the general section.
Did you install the samsung driver onto your computer?
Click to expand...
Click to collapse
Sorry about that.
Yes divers have been installed a long time. I used to be able to connect. Then about a month ago it decided to stop. I even tried it on a XP system, same thing.
Sent from my SCH-I500 using XDA App
Have you tried using a different USB cable?
mob87 said:
Have you tried using a different USB cable?
Click to expand...
Click to collapse
Yes. Tried my wifes. Tried one from my BB. Tried de-bugging mode. Tried rebooting while connected. Lol
Sent from my SCH-I500 using XDA App
Did you try a different USB port?
Also I would suggest updating to EB01 since DL30 isn't supported by devs and is a less stable Froyo build. Uninstall the Samsung drivers, reboot, reinstall and try it again.
Mine quit working today....i disabled usb debug then did a battery pull. Rebooted..enabled usb all is well...
Sent from my Froyo Fascinate.
I've had this issue and have tracked it down to my BT dongle. Every time I use it on my win 7 64bit box I have to uninstall the Samsung drivers, then reinstall without the phone or the BT dongle plugged in.
Thanks for all the input. It finally started working. I installed another rom and kernel. But now I can't get odin to recognize the phone in download mode. Weird stuff....
Sent from my SCH-I500 using XDA App
ragarm said:
Thanks for all the input. It finally started working. I installed another rom and kernel. But now I can't get odin to recognize the phone in download mode. Weird stuff....
Click to expand...
Click to collapse
I just ran into this myslef, and I believe the Fascinate has a bit of a multiple personality disorder. When I went through the Windows registry, I found entries listing the phone as a phone, as removable storage, as a SD card reader and as a CD drive. Nothing worked - no matter what I did, Windows wouldn't recognize it as anything.
To solve it, I had to uninstall the Samsung drivers and then search through the registry, removing anything that said Samsung. A bunch of keys gave me permission errors, but after finally removing them all, I connected the phone and it was immediately recognized as an Android Device. I reloaded the Samsung drivers and everything is back to normal.
A major PITA, but I'm just glad there was a solution.
If you want to try to do the same, uninstall the Samsung drivers, open regedit and search for Samsung. Delete any key that says Samsung (assuming you don't have any other Samsung peripherals). Hopefully you won't run into the permissions problems, but if you do, let me know and I'll walk you through how to get past them.
ChrisDDD, thank you. I will try that asap. That is some great information. I will report back my findings after I'm finished.
Sent from my SCH-I500 using XDA App
Well finally got around do working on this. And YES it worked. At least on my XP machine. Got some permission problems on my win 7 machine.
Chris, thanks for that bit of info. Only thing I had to do different than most was to reboot my phone in download from the menu that is installed with my kernel. I couldn't get it to work by pulling the batt and hooking up to pc. Funny stuff trying to get this stuff to work.
i need a windows 7 64 bit drivers. i installed htc sync and it wont read my device, i plug in my phone no pop up occurs. also when i try to mount it as a disk drive nothing happens, im running synergy rom.
Did you install the unrevoked / revolutionary drivers for you evo depending on the hboot?
teh roxxorz said:
Did you install the unrevoked / revolutionary drivers for you evo depending on the hboot?
Click to expand...
Click to collapse
i honestly dont remember how i rooted my evo, i rooted it after all the quick ways to root went down.
alleyezonblack said:
i honestly dont remember how i rooted my evo, i rooted it after all the quick ways to root went down.
Click to expand...
Click to collapse
Boot into the bootloader.
If its hboot 2.10 you need the unrevoked drivers, if 2.16 you need the revolutionary drivers.
unrevoked drivers > unrevoked.com
revolutionary drivers> revolutionary.io
if all else fails try this:
open Task Manager>Processes and look for something like "HTCUPCTloader.exe" and end that process. try your usb afterwards.
i couldnt believe when it actually worked, but it did
ImaWinRAR said:
if all else fails try this:
open Task Manager>Processes and look for something like "HTCUPCTloader.exe" and end that process. try your usb afterwards.
i couldnt believe when it actually worked, but it did
Click to expand...
Click to collapse
i tried this but nothing happened
teh roxxorz said:
Boot into the bootloader.
If its hboot 2.10 you need the unrevoked drivers, if 2.16 you need the revolutionary drivers.
unrevoked drivers > unrevoked.com
revolutionary drivers> revolutionary.io
Click to expand...
Click to collapse
i went to unrevoked.com and tried to re flash and it connect to the phone.
bump!!!!!!!!!!!!!!!!!!!
Update java on your computer. Happened to my fathers evo with windows 7
Sent from my hTc Evo!
i updated my java and im still getting the same error
alleyezonblack said:
i updated my java and im still getting the same error
Click to expand...
Click to collapse
http://andrewbrobinson.com/2011/01/20/adb-driver-for-htc-evo-4g/
Having trouble with AOSP? http://forum.xda-developers.com/showthread.php?t=1295702
how do i install these drivers?
Extract them and then go to device manager. Right click on wherever you need to, press update driver, pick manually, and then point it to the folder where the drivers are.
Having trouble with AOSP? http://forum.xda-developers.com/showthread.php?t=1295702
i tried to manually update my drivers, windows says i already have the best one installed
alleyezonblack said:
i tried to manually update my drivers, windows says i already have the best one installed
Click to expand...
Click to collapse
Uninstall that and install mine
Sent from my PC36100 using Tapatalk 2
ok, now i thinking its not the computer. recently my evo stopped charging, and no matter what computer i put it to it wont show up as a disk drive, the lil menu never even pops up... i have set the connect computer settings to automatically mount as disk drive and nothing still happens, it just charges... anybody know how to fix this? i need to unroot my phone
alleyezonblack said:
ok, now i thinking its not the computer. recently my evo stopped charging, and no matter what computer i put it to it wont show up as a disk drive, the lil menu never even pops up... i have set the connect computer settings to automatically mount as disk drive and nothing still happens, it just charges... anybody know how to fix this? i need to unroot my phone
Click to expand...
Click to collapse
Have you tried different chargers?
Sent from my PC36100 using Tapatalk 2
If you need your files on the computer you can use a wifi file explorer..
Sent from my PC36100 using Tapatalk 2
Trying to go from paranoid android to stock 4.2, and adb won't see my device, what is the deal?
ok, nevermind
alright heres the deal, in fastboot, it won't see my device, what is the deal?
I type in "Fastboot" devcices, and it just goes to the next line. Argh i'm getting pissed
Anybody? HELP!
Cor-master said:
Anybody? HELP!
Click to expand...
Click to collapse
Have you installed the Google USB drivers from the SDK, this guide will help you out.
http://developer.android.com/tools/extras/oem-usb.html
Cor-master said:
Anybody? HELP!
Click to expand...
Click to collapse
Have you got the right drivers on your PC?
Edit: Somebody beat me to it.
I've had a folder on my desktop I've been using since I rooted my flyer back in March, and my windows sees it in the bootloader, but cmd prompt doesn't.
here's a screenshot. God I've done this crap a million times, adb works inside android, but in the bootloader it does nothing, I hate getting stumped on simple crap.
Cor-master said:
here's a screenshot. God I've done this crap a million times, adb works inside android, but in the bootloader it does nothing, I hate getting stumped on simple crap.
Click to expand...
Click to collapse
I think Windows "sees" the device as a different device when it's in Fastboot mode versus being in Recovery mode, vs. fully booted.
Try force installing the driver per these directions:
http://trevorsullivan.net/2012/07/03/forcibly-installing-the-android-usb-driver-in-windows-7/
Cor-master said:
here's a screenshot. God I've done this crap a million times, adb works inside android, but in the bootloader it does nothing, I hate getting stumped on simple crap.
Click to expand...
Click to collapse
In device manager, is there a device with an unknown driver (warning sign)? when your N7 is connected to your PC?
I just downloaded wugs root tool kit, reinstalled drivers throught it, it worked completly...yet if I manually type commands I get nothing...ugh..
screw it I wanted to do it manually so I could try and keep my data, but so be it.
I am having the same issue. Google drivers installed while device was turned on. Adb works flawlessly as long as the device is fully booted. When the device reboots into recovery, windows sees it as a different device. Reinstalling the drivers while in recovery fails.
Sent from my Nexus 7 using xda premium
I dunno what the deal is. On my vivid kernels have to be flashed through fastboot because of htcs s on crap and it always works. Even stranger toolkits work fine but manually typing commands doesn't
Sent from my HTC PH39100 using Tapatalk 2
at some point in the last 6 months or so, my phone lost the ability to connect to my computer- I've tested by uninstalling and reinstalling the USB drivers on my computer, using virtual drivers, etc. Everything I could- I even tested on other computers that it has worked on in the past. Nothing helps.
I then decided it must be on my phones end, so I went so far as to replace the USB connection board inside my phone and that doesnt even work.
I used to have my phone rooted, but that was lost at some point over a couple OTA updates-- Is there anyway I can restore root access on my device without using a USB connection, or does anyone have any ideas on how to fix the connection issue?
Thanks!
Did you check the cable?
krystyuc said:
Did you check the cable?
Click to expand...
Click to collapse
Multiple cables as well. I'd do that before replacing the board!
crazychris78 said:
Multiple cables as well. I'd do that before replacing the board!
Click to expand...
Click to collapse
Usb debugging enabled?
krystyuc said:
Usb debugging enabled?
Click to expand...
Click to collapse
Tried that as well. I've tried pretty much everything I can think of. the superuser app says it might be a kernal issue
crazychris78 said:
Tried that as well. I've tried pretty much everything I can think of. the superuser app says it might be a kernal issue
Click to expand...
Click to collapse
Try the following
1)Boot into booloader and check in device manager if the phone is detected if so then go flash-all.bat 4.4.3( will wipe your phone,new phone factory)
krystyuc said:
Try the following
1)Boot into booloader and check in device manager if the phone is detected if so then go flash-all.bat 4.4.3( will wipe your phone,new phone factory)
Click to expand...
Click to collapse
bootloader isn't recognized on my PC or any others, either
crazychris78 said:
bootloader isn't recognized on my PC or any others, either
Click to expand...
Click to collapse
Well,in that case...i don't know.Maybe you should go to a specialist.
Look for flashify, a app can flash recovery, once you have recovery, you can have root.
Sent from my Galaxy Nexus using Tapatalk
chongns said:
Look for flashify, a app can flash recovery, once you have recovery, you can have root.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Flashify requires root access
do you have a kernel with fast charge enabled? that disables PC data connection
crazychris78 said:
Flashify requires root access
Click to expand...
Click to collapse
please answer below question
1. what os use on your PC ?
2. do you install others driver beside google adb and fastboot?
3. what version of adb and fastboot you have if you have installed before
4. you said you have OTA udpate from gogole or form the ROM developer?
note:
you need to install latest adb and fastboot. latest version is .31
if you have other 2 or more driver installed before, it may crash or mis regonice the phone, like samsung and google driver for Galaxy nexus which i facing.
some help form external web here
I have same problem, i tried even on linux. What is worst i removed rom from sdcard and now my current rom crashed. When i try to pull new rom via adb, new file is created but is "empty". Usb otg doesn't work in recovery ;/
I am seeing the same thing also. I even bought a USB replacement part on ebay and installed it. The PC still doesn't see the device.