kernel is not seandroid enforcing n9005 - Galaxy Note 3 Q&A, Help & Troubleshooting

hello gues
I have SM-N9005
and i install CWM 6.0.4.7
and install the custome rom Hyperdrive KK RLS3.1 ║
and installed lean kernel 2.6 and 2.5.1
and after booting getting this problem
kernel is not seandroid enforcing
set waranty: kernel
what is the solution?

mohands said:
hello gues
I have SM-N9005
and i install CWM 6.0.4.7
and install the custome rom Hyperdrive KK RLS3.1 ║
and installed lean kernel 2.6 and 2.5.1
and after booting getting this problem
kernel is not seandroid enforcing
set waranty: kernel
what is the solution?
Click to expand...
Click to collapse
It is normal when u flash custom kernel.
Unless u r saying u have a bootloop.
Sent from somewhere under the sky, at the corner of this rounded earth.

antique_sonic said:
It is normal when u flash custom kernel.
Unless u r saying u have a bootloop.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
so there is no any solution for that

mohands said:
so there is no any solution for that
Click to expand...
Click to collapse
Have of course.
Flash stock kernel!
Sent from somewhere under the sky, at the corner of this rounded earth.

It's not a problem... it's all ok!

how can i get the stock kernel only without flashing the stock rom

mohands said:
how can i get the stock kernel only without flashing the stock rom
Click to expand...
Click to collapse
Download the stock kernel of your choice and flash it in CWM.
In case you want the stock ND3 kernel: https://mega.co.nz/#!el4hUZ5K!ge2FS3XH7mfwHQ9QtBL5wFqNetwafpOptUl1dyhtM6k

kwayteow said:
Download the stock kernel of your choice and flash it in CWM.
In case you want the stock ND3 kernel: https://mega.co.nz/#!el4hUZ5K!ge2FS3XH7mfwHQ9QtBL5wFqNetwafpOptUl1dyhtM6k
Click to expand...
Click to collapse
thanks i will try it

mohands said:
thanks i will try it
Click to expand...
Click to collapse
does changing kernel affect on the rom operation or not

mohands said:
does changing kernel affect on the rom operation or not
Click to expand...
Click to collapse
stock kernel is a very safe and normal and standard to use

antique_sonic said:
stock kernel is a very safe and normal and standard to use
Click to expand...
Click to collapse
I'm running now custom rom lollipop 5.1.1 where i can find stock kernal?????
My phone n9005 international

Mahran omer said:
I'm running now custom rom lollipop 5.1.1 where i can find stock kernal?????
My phone n9005 international
Click to expand...
Click to collapse
There is no 5.1.1 stock kernel. The last stock is 5.0.
Sent from my SM-G925F

Rosli59564 said:
There is no 5.1.1 stock kernel. The last stock is 5.0.
Sent from my SM-G925F
Click to expand...
Click to collapse
Ok so if i use this last stock 5.0 kernal with this custom rom will fix this issue
Note: i know its normal with custom kernal it upset me ?? and really want this warrning go.

Mahran omer said:
Ok so if i use this last stock 5.0 kernal with this custom rom will fix this issue
Note: i know its normal with custom kernal it upset me ?? and really want this warrning go.
Click to expand...
Click to collapse
There is no 5.1.1 stock kernel. Samsung last update for note 3 is 5.0.
Sent from my SM-G925F

Related

[Q] Overclock Kernel for 4.4.2

I'm Trying to find a 4.4.2 compatible kernel that supports overclocking, under-volting and some battery optimizations (preferably developer supported). I was using Perseus in my Note II and loved it. But since moving to 4.4.2 the one kernel I tried kept the phone from booting. I don't want or need a whole ROM, just a kernel.
bladehawk said:
I'm Trying to find a 4.4.2 compatible kernel that supports overclocking, under-volting and some battery optimizations (preferably developer supported). I was using Perseus in my Note II and loved it. But since moving to 4.4.2 the one kernel I tried kept the phone from booting. I don't want or need a whole ROM, just a kernel.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2541304
heres a kernel just download no need for the rom
jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2541304
heres a kernel just download no need for the rom
Click to expand...
Click to collapse
I pushed the kernel with TWRP, cleared DALVIK, and nothing but boot loops. Thank goodness for backups. Any ideas of things I could try?
bladehawk said:
I pushed the kernel with TWRP, cleared DALVIK, and nothing but boot loops. Thank goodness for backups. Any ideas of things I could try?
Click to expand...
Click to collapse
The right kernel would be good.... The link posted was for 4.3, not 4.4.2. The correct version is here
http://forum.xda-developers.com/showthread.php?t=2646185
B3311 said:
The right kernel would be good.... The link posted was for 4.3, not 4.4.2. The correct version is here
http://forum.xda-developers.com/showthread.php?t=2646185
Click to expand...
Click to collapse
This worked perfectly, thanks again.

Can I install CM on non-KNOX bootloader?

Currently I'm on a Pre-rooted stock ROM and would really like to update as stock OTA is not working.
Info:
Model : GT-I9505
Android : 4.2.2
Baseband : I9505XXUBMGA
Kernel : 3.4.0-1081224
Build number : JDQ39.I9505XXUBMGA
So, I don't have the newer bootloader with KNOX yet.
Further, I already installed CWM 6.0.4.4 recovery
My questions:
Can I simply install CM10.2.1 or CM 11.2 through CWM?
Or do I have to update the bootloader first or does it include in CM?
Is there a catch in updating my phone concerning KNOX and chance of bricking?
I'm I stuck on CM or can I always revert to my backup of rooted stock 4.2.2?
Thanx in advance for any help.
I searched, but couldn't find correct answers...
Yes you can just install cm but if you try to install newer touchwiz roms then you need to change your modem. And wrong section....
Sent from my SCH-I545 using Tapatalk
pvdwaal said:
Currently I'm on a Pre-rooted stock ROM and would really like to update as stock OTA is not working.
Click to expand...
Click to collapse
Post this on HERE & you will get help you need there?
This is for ROM Dev only & you'll only get shouted at LOL
Alttwo said:
Yes you can just install cm but if you try to install newer touchwiz roms then you need to change your modem. And wrong section....
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
So KNOX is all about stock Samsung ROMs?
And I don't need an updated bootloader for all other ROMs like CM and OMEGA and can switch between them without issues?
yes.
pvdwaal said:
So KNOX is all about stock Samsung ROMs?
And I don't need an updated bootloader for all other ROMs like CM and OMEGA and can switch between them without issues?
Click to expand...
Click to collapse
Knox is basically a counter to counter rooters. You should be able to flash any ROM like normal but there may be some changed needed to be done for the modem. I'm sure there are multiple threads about the i9505 modems...
Sent from my SCH-I545 using Tapatalk

AOSP on new bootloader

Is it now possible to flash AOSP on a stock kit kat bootloader? Because before I heard that AOSP can only be flash on old stock boot loader which is Android 4.3.
bibiner said:
Is it now possible to flash AOSP on a stock kit kat bootloader? Because before I heard that AOSP can only be flash on old stock boot loader which is Android 4.3.
Click to expand...
Click to collapse
if you mean, CM11 ... yes you can.
aouni_tahech said:
if you mean, CM11 ... yes you can.
Click to expand...
Click to collapse
Other AOSP? Like slim kat and C ROM and aosb etc
bibiner said:
Other AOSP? Like slim kat and C ROM and aosb etc
Click to expand...
Click to collapse
I believe YES. I've installed AOSB on kitkat bootloader with no problems at all.
Check the other roms discussion threads, you'll find out the answer if you search inside the thread.
aouni_tahech said:
I believe YES. I've installed AOSB on kitkat bootloader with no problems at all.
Check the other roms discussion threads, you'll find out the answer if you search inside the thread.
Click to expand...
Click to collapse
Help please. I tried to install AOSB with Cwm with full wipe. I was on X-Note 17. After I flash it soft bricked my device. Manage to save it by flashing a stock firmware through Odin. Any idea?
bibiner said:
Help please. I tried to install AOSB with Cwm with full wipe. I was on X-Note 17. After I flash it soft bricked my device. Manage to save it by flashing a stock firmware through Odin. Any idea?
Click to expand...
Click to collapse
maybe the one you flashed not for note 3?[emoji51]
Sent from my SM-N9005 using Tapatalk
Rosli59564 said:
maybe the one you flashed not for note 3?[emoji51]
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
It was correct. Hlte or N9005 should be correct.

Can't flash any rom

the only rom I can install is jasmine 2.3 but when I try 1.8 or Alliance or hyper drive I get stuck on a black screen.
Are you on NC2? Nc4? What steps have you taken?
Sent from my SM-G900V using Tapatalk
neopolotin75 said:
Are you on NC2? Nc4? What steps have you taken?
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
idk I just flashed safestrap and jasmine 2.3... from kitekat
??
You are probably on the nc4 kernel , so you need to Odin the nc2 kernel for other roms. Besides stock nc4 rom, jasmine 2.3 is the only rom that supports the nc4 kernel
Nc4 and nc2 mean?
hazedabeast said:
Nc4 and nc2 mean?
Click to expand...
Click to collapse
Yes, if your still on an nc4 kernel you can't flash other roms without Odin the nc2 kernel first
mjh68 said:
Yes, if your still on an nc4 kernel you can't flash other roms without Odin the nc2 kernel first
Click to expand...
Click to collapse
So I first install the rom then use odin to flash the nc2 kernel?
hazedabeast said:
So I first install the rom then use odin to flash the nc2 kernel?
Click to expand...
Click to collapse
Think u flash kernel first then rom
mjh68 said:
Think u flash kernel first then rom
Click to expand...
Click to collapse
Oh alright I'll try
mjh68 said:
Think u flash kernel first then rom
Click to expand...
Click to collapse
what setting does the kernel go in on odin?
hazedabeast said:
what setting does the kernel go in on odin?
Click to expand...
Click to collapse
AP is where the file goes to flash it
how exactly do i flash a rom that has nc2?
hazedabeast said:
how exactly do i flash a rom that has nc2?
Click to expand...
Click to collapse
As long as you have the NC2 kernel any NC4 rom will run as long as it's not Jasmine. Jasmine has a very detailed install process as it's a s5 port to the note 3. I've yet to mess with it but you can try reading here if you're on NC4 OTA.
http://forum.xda-developers.com/showpost.php?p=53508274&postcount=2

XPOSED

WHY I CANT INSTALL XPOSED ON MY NOTE?
i do all the steps but i cant...
Stock Rom or custom?
I just flashed xposed alfa 3 from recovery.
Reboot.
Start xposed app once.
Reboot in recovery.
Flashed framework.
Wipe (just in case).
Reboot. Done.
As I know on stock it won't work for now. Just deodexed roms are supported.
stock
Where i can found guide for note4.?
shlomoreuven said:
Where i can found guide for note4.?
Click to expand...
Click to collapse
it won't work on stock rom.
only deodexed roms can use the modded experimental alpha build :good:
Clearly someone forgot to read the Xposed op
Sent from my SM-N9005 using Tapatalk
If i have stock rom of lollipop its can be work?
shlomoreuven said:
If i have stock rom of lollipop its can be work?
Click to expand...
Click to collapse
You just asked a similar question a few posts up. The answer is the same. You need a deodexed rom. A stock rom is odexed.
Hi friends
i can make stock rom to deodexed rom???
I realy want the exposed but not with custom rom
thanks for answers
shlomoreuven said:
Hi friends
i can make stock rom to deodexed rom???
I realy want the exposed but not with custom rom
thanks for answers
Click to expand...
Click to collapse
what variant Of Note 4 You've Got????
Stock of israel
910f
shlomoreuven said:
Stock of israel
910f
Click to expand...
Click to collapse
Download the Deodexed Stock version for N910F...either BOD2 or POF2...
Both will work...
Don't forget to Flashing the appropriate Bootloader & Modem via Odin...(like for POF2 use POF2 BL modem.. For BOD2 use BOD2 BL as well modem )
Download Bootloader & Modem For SM-N910F
It's all Stock just changed to Deodexed ...
Everything is Present like in Stock Samsung...

Categories

Resources