the only rom I can install is jasmine 2.3 but when I try 1.8 or Alliance or hyper drive I get stuck on a black screen.
Are you on NC2? Nc4? What steps have you taken?
Sent from my SM-G900V using Tapatalk
neopolotin75 said:
Are you on NC2? Nc4? What steps have you taken?
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
idk I just flashed safestrap and jasmine 2.3... from kitekat
??
You are probably on the nc4 kernel , so you need to Odin the nc2 kernel for other roms. Besides stock nc4 rom, jasmine 2.3 is the only rom that supports the nc4 kernel
Nc4 and nc2 mean?
hazedabeast said:
Nc4 and nc2 mean?
Click to expand...
Click to collapse
Yes, if your still on an nc4 kernel you can't flash other roms without Odin the nc2 kernel first
mjh68 said:
Yes, if your still on an nc4 kernel you can't flash other roms without Odin the nc2 kernel first
Click to expand...
Click to collapse
So I first install the rom then use odin to flash the nc2 kernel?
hazedabeast said:
So I first install the rom then use odin to flash the nc2 kernel?
Click to expand...
Click to collapse
Think u flash kernel first then rom
mjh68 said:
Think u flash kernel first then rom
Click to expand...
Click to collapse
Oh alright I'll try
mjh68 said:
Think u flash kernel first then rom
Click to expand...
Click to collapse
what setting does the kernel go in on odin?
hazedabeast said:
what setting does the kernel go in on odin?
Click to expand...
Click to collapse
AP is where the file goes to flash it
how exactly do i flash a rom that has nc2?
hazedabeast said:
how exactly do i flash a rom that has nc2?
Click to expand...
Click to collapse
As long as you have the NC2 kernel any NC4 rom will run as long as it's not Jasmine. Jasmine has a very detailed install process as it's a s5 port to the note 3. I've yet to mess with it but you can try reading here if you're on NC4 OTA.
http://forum.xda-developers.com/showpost.php?p=53508274&postcount=2
Related
I Flashed adam's kernel so I could root my phone. I successfully rooted and flash adam's kernel. I was wondering how could I revert back to the stock kernel? Thanks in advance
gaurdjatixa said:
I Flashed adam's kernel so I could root my phone. I successfully rooted and flash adam's kernel. I was wondering how could I revert back to the stock kernel? Thanks in advance
Click to expand...
Click to collapse
Deleted
gaurdjatixa said:
I Flashed adam's kernel so I could root my phone. I successfully rooted and flash adam's kernel. I was wondering how could I revert back to the stock kernel? Thanks in advance
Click to expand...
Click to collapse
Quickest way revert back to stock rom http://forum.xda-developers.com/showthread.php?t=2265477
Sent from my GT-I9505 using xda app-developers app
topcat07 said:
Quickest way revert back to stock rom http://forum.xda-developers.com/showthread.php?t=2265477
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
is there a way to flash only the kernel and not losing data? and how to do I back up and restore data if I want to unroot? sorry for the noob question. Kinda new to android thanks in advance!
Whatsup OP,
easiest way is mentioned, is to simply reflash the entire stock ROM, perhaps the question you should be asking is how to extract the Kernel from the entire ROM zip?
also i would recomend reflashing the entire stock ROM on anyway just to avoid any issues.
Hope i helped!
Here is a link for the ME2 dated 2-5-2013 stock kernel and recovery http://fs1.d-h.st/download/00046/xDf/I9505XXUAME2-STOCK-KERNEL-RECOVERY.rar. Extract once with 7-zip and flash the md5 file in PDA with Odin.
gee2012 said:
Here is a link for the ME2 dated 2-5-2013 stock kernel and recovery. Extract once with 7-zip and flash the md5 file in PDA with Odin.
Click to expand...
Click to collapse
Is it okay to flash ME2 kernel even if I have MDK?
gaurdjatixa said:
Is it okay to flash ME2 kernel even if I have MDK?
Click to expand...
Click to collapse
You could do that but its better to check for updates and reroot.
Has anybody had success with this? Failed when I tried to flash the beastly n.e.o.n. ROM after the mje ota.
ButterBoost ROM Developer
XzxBATTxzX said:
Has anybody had success with this? Failed when I tried to flash the beastly n.e.o.n. ROM after the mje ota.
ButterBoost ROM Developer
Click to expand...
Click to collapse
I have flashed beans and hyperdrive successfully
2swizzle said:
I have flashed beans and hyperdrive successfully
Click to expand...
Click to collapse
I guess I'll try hyperdrive tomorrow and see if it works.
hello gues
I have SM-N9005
and i install CWM 6.0.4.7
and install the custome rom Hyperdrive KK RLS3.1 ║
and installed lean kernel 2.6 and 2.5.1
and after booting getting this problem
kernel is not seandroid enforcing
set waranty: kernel
what is the solution?
mohands said:
hello gues
I have SM-N9005
and i install CWM 6.0.4.7
and install the custome rom Hyperdrive KK RLS3.1 ║
and installed lean kernel 2.6 and 2.5.1
and after booting getting this problem
kernel is not seandroid enforcing
set waranty: kernel
what is the solution?
Click to expand...
Click to collapse
It is normal when u flash custom kernel.
Unless u r saying u have a bootloop.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
It is normal when u flash custom kernel.
Unless u r saying u have a bootloop.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
so there is no any solution for that
mohands said:
so there is no any solution for that
Click to expand...
Click to collapse
Have of course.
Flash stock kernel!
Sent from somewhere under the sky, at the corner of this rounded earth.
It's not a problem... it's all ok!
how can i get the stock kernel only without flashing the stock rom
mohands said:
how can i get the stock kernel only without flashing the stock rom
Click to expand...
Click to collapse
Download the stock kernel of your choice and flash it in CWM.
In case you want the stock ND3 kernel: https://mega.co.nz/#!el4hUZ5K!ge2FS3XH7mfwHQ9QtBL5wFqNetwafpOptUl1dyhtM6k
kwayteow said:
Download the stock kernel of your choice and flash it in CWM.
In case you want the stock ND3 kernel: https://mega.co.nz/#!el4hUZ5K!ge2FS3XH7mfwHQ9QtBL5wFqNetwafpOptUl1dyhtM6k
Click to expand...
Click to collapse
thanks i will try it
mohands said:
thanks i will try it
Click to expand...
Click to collapse
does changing kernel affect on the rom operation or not
mohands said:
does changing kernel affect on the rom operation or not
Click to expand...
Click to collapse
stock kernel is a very safe and normal and standard to use
antique_sonic said:
stock kernel is a very safe and normal and standard to use
Click to expand...
Click to collapse
I'm running now custom rom lollipop 5.1.1 where i can find stock kernal?????
My phone n9005 international
Mahran omer said:
I'm running now custom rom lollipop 5.1.1 where i can find stock kernal?????
My phone n9005 international
Click to expand...
Click to collapse
There is no 5.1.1 stock kernel. The last stock is 5.0.
Sent from my SM-G925F
Rosli59564 said:
There is no 5.1.1 stock kernel. The last stock is 5.0.
Sent from my SM-G925F
Click to expand...
Click to collapse
Ok so if i use this last stock 5.0 kernal with this custom rom will fix this issue
Note: i know its normal with custom kernal it upset me ?? and really want this warrning go.
Mahran omer said:
Ok so if i use this last stock 5.0 kernal with this custom rom will fix this issue
Note: i know its normal with custom kernal it upset me ?? and really want this warrning go.
Click to expand...
Click to collapse
There is no 5.1.1 stock kernel. Samsung last update for note 3 is 5.0.
Sent from my SM-G925F
I want to clean up my phone and get the NC4 firmware and get the new root method and install Eclipse.
Anyone provide the fir.ware for me please.
Sent from my SM-N900V using XDA Free mobile app
scoreboard said:
I want to clean up my phone and get the NC4 firmware and get the new root method and install Eclipse.
Anyone provide the fir.ware for me please.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
Eclipse is NC2 not NC4.. Just install the nc2 leak.
scoreboard said:
I want to clean up my phone and get the NC4 firmware and get the new root method and install Eclipse.
Anyone provide the fir.ware for me please.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
This should be in the Q and A/Troubleshooting section, just for future reference.
Still need that Stock NC4 firmware tar.
Tried to flash NC2 over NC4, softbricked now :/
Upon booting says to use Software Repair Assistant from Verizon, can't get into recovery, can't get into SafeStrap, only Download / Odin mode.
Because once your on the nc4 ota, you cannot go back.
Firmware
http://samsung-updates.com/latest-firmware/
《 #VerizonLovesYou 》
http://www.androidfilehost.com/?fid=23487008491963309 don't use unless you were already on nc4. Otherwise use nc2.
Sent from my SM-N900V using Tapatalk
I was on the nc4 ota, rooted this morning with the new method, but have had no luck installing eclipse yet.
about to try another rom, and see if it takes but for the time being I have root, just can't install a rom
ROB281 said:
I was on the nc4 ota, rooted this morning with the new method, but have had no luck installing eclipse yet.
about to try another rom, and see if it takes but for the time being I have root, just can't install a rom
Click to expand...
Click to collapse
it's a weird quirk with the firmware. nc4 firmware/bootloader can only have nc4 based roms flashed over it. I believe Jasmine rom in dev section has a beta release you might be able to use...
《 #VerizonLovesYou 》
I'm guessing there's still no way to downgrade to NC2 is there?
ROB281 said:
I'm guessing there's still no way to downgrade to NC2 is there?
Click to expand...
Click to collapse
Call verizon and get a replacement with mje on it is the only way I've seen. Lol. Some note 3 have signal issues.....
TaPpEd from my XpOsEd 4.4.2 NIII
Official Stock 4.4.2 Kitkat NC4 Firmware...
Zip file (1.6 GB):
http://www.sammobile.com/firmwares/3/?download=29319 and http://rapidgator.net/file/d6f6780043f87044b413b3e0704909c6
OR
Extracted Tar File (2.3 GB):
http://www.androidfilehost.com/?fid=23487008491963309
ROB281 said:
I was on the nc4 ota, rooted this morning with the new method, but have had no luck installing eclipse yet.
about to try another rom, and see if it takes but for the time being I have root, just can't install a rom
Click to expand...
Click to collapse
Well if u have NC4 OTA then i think you can flash the leaked NC2 kernel in ODIN, install safestrap and then can flash Eclipse because Eclipse ROM will run on NC2 kernel not NC4 kernel...
So I've got a Verizon Note 3 running android 4.3 rooted with supersu + busybox, decent amount of samsung bloatware disabled. I am wondering for starters if I were to install safestrap if I can just keep the way it currently is and then use a rom slot for any roms or should I factory wipe the stock slot, install 4.4.2 via odin then root via towelroot and then install safestrap and rom from that or what method should I take? Is it possible to use the ROM slots on the VZN3? I watched a few youtube videos and they were all factory resetting the stock slot and installing it there but I'd love to be able to just keep my current setup as is since it'd be a guranteed fallback. In case this doesnt make sense just respond as to what needs clarification and i'll respond in less than 5 minutes.
You can use only the jelly bean roms while on jb. Follow the instructions to use a kitkat rom in each roms op. You have to odin the kernal. You will retain root if following them. You dont need to use towelroot.
So can i just do a rom slot or do I have to upgrade to kit kat? What do you mean by odin the kernel?
Its really to much to explain… you probably really have to do some read up on odin software and kernels before you attempt to do anything on your phone cause no one is responsible but you… So please google search how to odin or how to flash a unified kernel NC2 or NC4… Nc2 is a older but more versatile kernel of 4.4.2 and Nc4 is the lastest kernel likely the one that your on now go to about phone and look under Baseband Version yours should say NC4 the last 3 character
waco2hot33 said:
Its really to much to explain… you probably really have to do some read up on odin software and kernels before you attempt to do anything on your phone cause no one is responsible but you… So please google search how to odin or how to flash a unified kernel NC2 or NC4… Nc2 is a older but more versatile kernel of 4.4.2 and Nc4 is the lastest kernel likely the one that your on now go to about phone and look under Baseband Version yours should say NC4 the last 3 character
Click to expand...
Click to collapse
Seems like saying kernel is unnecessary, isn't this just flashing the .tar or whatever format it is to the phone using odin, i've already done that. I just need to upgrade to NC4? No one is answering the question of whether i can just use the rom slots and keep the stock slot active on MJE.
Xproplayer said:
Seems like saying kernel is unnecessary, isn't this just flashing the .tar or whatever format it is to the phone using odin, i've already done that. I just need to upgrade to NC4? No one is answering the question of whether i can just use the rom slots and keep the stock slot active on MJE.
Click to expand...
Click to collapse
Once you upgrade to KK your MJE roms won't work so if you have a real love for a particular MJE rom stay on MJE. On KK and the updated safestrap rom slots work but with mixed results, some people have no problems and other roms in slots other than stock have seen performance issues.
You only need the NC2 kernel if you took the NC4 OTA, if you upgrade via this method you don't have to worry about it.
See here : http://forum.xda-developers.com/showpost.php?p=55241731&postcount=2
waco2hot33 said:
Its really to much to explain… you probably really have to do some read up on odin software and kernels before you attempt to do anything on your phone cause no one is responsible but you… So please google search how to odin or how to flash a unified kernel NC2 or NC4… Nc2 is a older but more versatile kernel of 4.4.2 and Nc4 is the lastest kernel likely the one that your on now go to about phone and look under Baseband Version yours should say NC4 the last 3 character
Click to expand...
Click to collapse
thegamerdarkseid said:
Once you upgrade to KK your MJE roms won't work so if you have a real love for a particular MJE rom stay on MJE. On KK and the updated safestrap rom slots work but with mixed results, some people have no problems and other roms in slots other than stock have seen performance issues.
You only need the NC2 kernel if you took the NC4 OTA, if you upgrade via this method you don't have to worry about it.
See here : http://forum.xda-developers.com/showpost.php?p=55241731&postcount=2
Click to expand...
Click to collapse
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
No that can't happen unless there's something huge that I don't know about. They are different firmwares. But if you do the rooted upgrade you can go back if you prefer ME, if you do the OTA there's no going back to MJE.
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
No that can't happen unless there's something huge that I don't know about. They are different firmwares. But if you do the rooted upgrade you can go back if you prefer ME, if you do the OTA there's no going back to MJE.
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
No that can't happen unless there's something huge that I don't know about. They are different firmwares. But if you do the rooted upgrade you can go back if you prefer ME, if you do the OTA there's no going back to MJE.
Xproplayer said:
I don't want MJE roms, I want NC4 roms, but what I mean is can I keep my stock slot as MJE and use rom slot for nc4 roms
Click to expand...
Click to collapse
currently the only rom that runs with the NC4 kernel is jasmine.
the_rooter said:
currently the only rom that runs with the NC4 kernel is jasmine.
Click to expand...
Click to collapse
Are you sure? I was looking at alliancerom and it says NC4 4.4.2 in the name...
http://forum.xda-developers.com/showthread.php?t=2553357
Xproplayer said:
Are you sure? I was looking at alliancerom and it says NC4 4.4.2 in the name...
http://forum.xda-developers.com/showthread.php?t=2553357
Click to expand...
Click to collapse
Yes Alliance is nc2 kernel but it'll be nc4 next build..... http://forum.xda-developers.com/showthread.php?p=55373385
thegamerdarkseid said:
Yes Alliance is nc2 kernel but it'll be nc4 next build..... http://forum.xda-developers.com/showthread.php?p=55373385
Click to expand...
Click to collapse
Do you happen to know about hyerdrive, and just to clarify i should be able to flash nc2 to my vzn3 and then install alliance over it
Both are possible; I did the latter. ROM slots do not work with SS 3.72 and above (the one you will need if you are running kit Kat). You can only flash ROMs to the stock slot, so make a nandroid first!
If you decide to stay on JB and SS 3.71, you can definitely keep a stock ROM in the stock slot and install another ROM on a custom ROM slot. Hope I could help.
Sent from my GT-I9505G using Tapatalk
---------- Post added at 07:38 AM ---------- Previous post was at 07:32 AM ----------
Actually since you're on note 3 you may need SS 3.75 if you're going to flash kit Kat Roms. If you have any questions feel free to email me. And yes Hyperdrive is an extremely popular TW ROM. Just make sure whatever android version you are on, flash a compatible ROM.
Sent from my GT-I9505G using Tapatalk
marbertshere said:
Both are possible; I did the latter. ROM slots do not work with SS 3.72 and above (the one you will need if you are running kit Kat). You can only flash ROMs to the stock slot, so make a nandroid first!
If you decide to stay on JB and SS 3.71, you can definitely keep a stock ROM in the stock slot and install another ROM on a custom ROM slot. Hope I could help.
Sent from my GT-I9505G using Tapatalk
---------- Post added at 07:38 AM ---------- Previous post was at 07:32 AM ----------
Actually since you're on note 3 you may need SS 3.75 if you're going to flash kit Kat Roms. If you have any questions feel free to email me. And yes Hyperdrive is an extremely popular TW ROM. Just make sure whatever android version you are on, flash a compatible ROM.
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
its actually ss 3.75 B04
So does anyone know about hyperdrive? I looked all over the thread and couldn't find anything..
Xproplayer said:
So does anyone know about hyperdrive? I looked all over the thread and couldn't find anything..
Click to expand...
Click to collapse
What do you want to know about Hyperdrive? If you're on NC4 and you want to run Hyperdrive you'll have to flash the NC2 kernel after flashing the rom or it won't boot. Just flash the rom in safestrap and when you're done flashing use safestrap to boot into download mode and flash NC2 kernel in Odin in the AP slot. In all honesty I'd look into flashing @hsbadr unified kk firmware and then you could run any rom in this forum without worrying about flashing the NC2 kernel. I've done it and been able to bounce from rom to rom without any issues....
thegamerdarkseid said:
What do you want to know about Hyperdrive? If you're on NC4 and you want to run Hyperdrive you'll have to flash the NC2 kernel after flashing the rom or it won't boot. Just flash the rom in safestrap and when you're done flashing use safestrap to boot into download mode and flash NC2 kernel in Odin in the AP slot. In all honesty I'd look into flashing @hsbadr unified kk firmware and then you could run any rom in this forum without worrying about flashing the NC2 kernel. I've done it and been able to bounce from rom to rom without any issues....
Click to expand...
Click to collapse
I'm currently on 4.3 MJE, could you send some links on this unified, the only two roms I'm currently interested in are Hyperdrive and Alliance but I've been told each one has to be flashed onto specific roms etc etc.
Xproplayer said:
I'm currently on 4.3 MJE, could you send some links on this unified, the only two roms I'm currently interested in are Hyperdrive and Alliance but I've been told each one has to be flashed onto specific roms etc etc.
Click to expand...
Click to collapse
Here's the link to the post look in Downloads. RE is for retail edition and DE is for Dev Edition. Don't flash the wrong one or you could brick your phone. The unified firmware is flashed in Odin in the AP slot and once you flash it you can jump from rom to rom without worrying about the NC2 kernel but since you're on MJE you'll need to do the KK upgrade before flashing unified firmware. See quote in red at the bottom of the Downloads section!! I don't want you to get the wrong impression as I'm not yelling at you or anything bro, I don't want anyone bricking their device....
Link to firmware : http://forum.xda-developers.com/showpost.php?p=52860439&postcount=1
Links for all other things : http://forum.xda-developers.com/showpost.php?p=55241731&postcount=2