[Q] Overclock Kernel for 4.4.2 - Galaxy Note 3 Q&A, Help & Troubleshooting

I'm Trying to find a 4.4.2 compatible kernel that supports overclocking, under-volting and some battery optimizations (preferably developer supported). I was using Perseus in my Note II and loved it. But since moving to 4.4.2 the one kernel I tried kept the phone from booting. I don't want or need a whole ROM, just a kernel.

bladehawk said:
I'm Trying to find a 4.4.2 compatible kernel that supports overclocking, under-volting and some battery optimizations (preferably developer supported). I was using Perseus in my Note II and loved it. But since moving to 4.4.2 the one kernel I tried kept the phone from booting. I don't want or need a whole ROM, just a kernel.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2541304
heres a kernel just download no need for the rom

jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2541304
heres a kernel just download no need for the rom
Click to expand...
Click to collapse
I pushed the kernel with TWRP, cleared DALVIK, and nothing but boot loops. Thank goodness for backups. Any ideas of things I could try?

bladehawk said:
I pushed the kernel with TWRP, cleared DALVIK, and nothing but boot loops. Thank goodness for backups. Any ideas of things I could try?
Click to expand...
Click to collapse
The right kernel would be good.... The link posted was for 4.3, not 4.4.2. The correct version is here
http://forum.xda-developers.com/showthread.php?t=2646185

B3311 said:
The right kernel would be good.... The link posted was for 4.3, not 4.4.2. The correct version is here
http://forum.xda-developers.com/showthread.php?t=2646185
Click to expand...
Click to collapse
This worked perfectly, thanks again.

Related

[Q] Going back to original kernal.

I'm thinking of flashing Trinity kernel on my Nexus 7. If I have troubles after flashing the Trinity kernel and want to revert back to my present kernel do I restore a nandroid backup or is there something else I have to do to get present kernel back? Am currently running CM 10.1 jb 4.2.1 on my Nexus 7. Any input would be greatly appreciated. Thanks.
Just do a dirty flash (flash CM10.1 again without factory reset, just wipe cache and dalvik). Your kernel will be overwritten.
kevk60 said:
I'm thinking of flashing Trinity kernel on my Nexus 7. If I have troubles after flashing the Trinity kernel and want to revert back to my present kernel do I restore a nandroid backup or is there something else I have to do to get present kernel back? Am currently running CM 10.1 jb 4.2.1 on my Nexus 7. Any input would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
davisac said:
Just do a dirty flash (flash CM10.1 again without factory reset, just wipe cache and dalvik). Your kernel will be overwritten.
Click to expand...
Click to collapse
yup, thats the easiest way. but you dont have to wipe anything, not even dalvik or cache. you can always extract the boot.img from the cm rom and flash it via fastboot too.
Thanks simms. I'm still trying to figure everything out just got my Nexus for Christmas.
davisac said:
Just do a dirty flash (flash CM10.1 again without factory reset, just wipe cache and dalvik). Your kernel will be overwritten.
Click to expand...
Click to collapse
Thanks for all your info. Appreciate it. Have a good one!
How about if Im using stock rom and I want to flash a different kernel, what should I do?
Leonhan said:
How about if Im using stock rom and I want to flash a different kernel, what should I do?
Click to expand...
Click to collapse
Flash the kernel? Lol !
Wilks3y said:
Flash the kernel? Lol !
Click to expand...
Click to collapse
Ive read that franco has a ramdisk of his own, how do I apply a new kernel without problems if I will try a different one (say motley kernel)?
Trinity kernel working great.
kevk60 said:
Thanks for all your info. Appreciate it. Have a good one!
Click to expand...
Click to collapse
Flashed Trinity kernel on my Nexus 7 and it is great. Am running CM 10.1 JB 4.2.1 latest nightly and so far everything is working awesome. Thanks for everyones input. Thanks to morfic for a wonderful kernel. Boom! Freak out now.

updating camera firmware. please wait... on flashes gt9505 with att ktweater

i keep getting that message in my camera and then it just closes my camera and doesnt say anything else. i have the ATT gs4 with the wanam lite rom for GT9505 with the ATT ktweaker to make the rom work. any idea how to make that stop or update that camera firmware.
jerrah said:
i keep getting that message in my camera and then it just closes my camera and doesnt say anything else. i have the ATT gs4 with the wanam lite rom for GT9505 with the ATT ktweaker to make the rom work. any idea how to make that stop or update that camera firmware.
Click to expand...
Click to collapse
I'm seeing the same thing running Omega and KT kernel.
mannerheim77 said:
I'm seeing the same thing running Omega and KT kernel.
Click to expand...
Click to collapse
I'm running the exact same thing with zero issues
Sent from my SGH-I337M using xda premium
thatsupnow said:
I'm running the exact same thing with zero issues
Sent from my SGH-I337M using xda premium
Click to expand...
Click to collapse
idk i tried omega just not with faux kernel same thing no idea how to fix it
jerrah said:
idk i tried omega just not with faux kernel same thing no idea how to fix it
Click to expand...
Click to collapse
try doing this it does work http://forum.xda-developers.com/showthread.php?p=41692622
Sent from my SGH-I337M using xda premium
thatsupnow said:
try doing this it does work http://forum.xda-developers.com/showthread.php?p=41692622
Sent from my SGH-I337M using xda premium
Click to expand...
Click to collapse
i did install that way, but since i have ATT us version i have to install a kernel before i boot, i cant just use the kernal it comes with.. or can i ? will it still load ? then thats how i do that camera thing then i flash the kernel ?
jerrah said:
i did install that way, but since i have ATT us version i have to install a kernel before i boot, i cant just use the kernal it comes with.. or can i ? will it still load ? then thats how i do that camera thing then i flash the kernel ?
Click to expand...
Click to collapse
I started with the kernel in the rom just to boot it, then went back into recovery and flashed a kernel for my model and everything is running fine
Omega v3.0, 3minit framework, kt kernel 2.2 Ghz
thatsupnow said:
I started with the kernel in the rom just to boot it, then went back into recovery and flashed a kernel for my model and everything is running fine
Omega v3.0, 3minit framework, kt kernel 2.2 Ghz
Click to expand...
Click to collapse
ok so im gonna put the zips back on, flash one reboot let it load up... if i read right i wont have wifi or other stuff that doesnt work, click the camera let it load that firmware thing, reboot recovery install the att kernel then reboot and stuff should work
jerrah said:
ok so im gonna put the zips back on, flash one reboot let it load up... if i read right i wont have wifi or other stuff that doesnt work, click the camera let it load that firmware thing, reboot recovery install the att kernel then reboot and stuff should work
Click to expand...
Click to collapse
If that doesn't work, just try flashing the stock Samsung Camera APK. I'm having the same issue as you are, but Im gonna hit the sack tonight and try it tomorrow.
http://forum.xda-developers.com/showthread.php?t=2295650
mannerheim77 said:
If that doesn't work, just try flashing the stock Samsung Camera APK. I'm having the same issue as you are, but Im gonna hit the sack tonight and try it tomorrow.
http://forum.xda-developers.com/showthread.php?t=2295650
Click to expand...
Click to collapse
i have that file i cant figure out how to delete the old file from twrp i cant get to the system/apps folder
thatsupnow said:
I started with the kernel in the rom just to boot it, then went back into recovery and flashed a kernel for my model and everything is running fine
Omega v3.0, 3minit framework, kt kernel 2.2 Ghz
Click to expand...
Click to collapse
ya, tried it it wont let me boot because its not att kernel to start with. soooo idk lol
jerrah said:
i did install that way, but since i have ATT us version i have to install a kernel before i boot, i cant just use the kernal it comes with.. or can i ? will it still load ? then thats how i do that camera thing then i flash the kernel ?
Click to expand...
Click to collapse
Bott with loki doki which keeps the original kernel.
Alright, I got the update firmware message to go away by just flashing the newest v3.1 Omega ROM and the KT kernel.
Im having the same issue " updating camera firmware. Please wait"
I have tried everything from flash stock with oden and re-rooting the phone and installing CWM with loki and i even flashed loki doki to see if that would help and if i tried to run OMEGA 3.1 without KT kernel all i get is "System software not authorized by ATT has been found on your phone"
Everything in OMEGA seems to be working but as soon as i open the camera app i continue to get "Updating camera firmware... please wait". Any other suggestions would be greatly appreciated. Thanks
cja1782 said:
I have tried everything from flash stock with oden and re-rooting the phone and installing CWM with loki and i even flashed loki doki to see if that would help and if i tried to run OMEGA 3.1 without KT kernel all i get is "System software not authorized by ATT has been found on your phone"
Everything in OMEGA seems to be working but as soon as i open the camera app i continue to get "Updating camera firmware... please wait". Any other suggestions would be greatly appreciated. Thanks
Click to expand...
Click to collapse
Same for me
I just restored back to darthstalker v2 with kt kernel. no issues what so ever
Sent from my I-337 At&t using xda premium
cja1782 said:
I just restored back to darthstalker v2 with kt kernel. no issues what so ever
Sent from my I-337 At&t using xda premium
Click to expand...
Click to collapse
Yeah but if you're using a specific ROM, may be hard to flash back to something else.
mannerheim77 said:
Alright, I got the update firmware message to go away by just flashing the newest v3.1 Omega ROM and the KT kernel.
Click to expand...
Click to collapse
What version KT kernel? Thanks
Sent from my GT-I9505 using xda premium
i was using the 5/27/13 one which at the time was the newest one.
jerrah said:
i was using the 5/27/13 one which at the time was the newest one.
Click to expand...
Click to collapse
Ok thanks bud. For what rom. I'm a t-mobile user. Do I flash KT for omega I9505 or t-mobile version? I'm not sure it will even boot? I know it won't for at&t because of the locked bootloader but it's possible it will for me? I'm trying to get that camera is updating message?
Sent from my GT-I9505 using xda premium

Could not install ROM on safestrap ROM slot

I installed safestrap 3.6 as explained in http://forum.xda-developers.com/showthread.php?t=2448942
Everything worked fine, created a new slot with 3Gbyte size. However, I could ntot get custom ROM installed there. I copied ROM .zip file (CARBON-JB-1.8-jflteatt.zip) to internal SD card + gapps -jb-20130813-signed.zip. Got "installation completed" message for both ZIPs, and then :
Updating partition details...
E: Unable to mount internal storage. Got green "Successful" message under the window where all log messages were running.
Then when rebooting with newly-flashed ROM slot, the phone does not boot, it is stuck with back screen and the only way to get it back to life is to power-cycle it and boot into stock ROM slot.
Any idea what went wrong?
Phone details:
Model: SAMSUNG-SGH-I337
Android 4.2.2
Baseband version - I337UCUAMF3
Kernel version 3.4.0-812098
Thanks,
Carbon is not tw based. Only touch wiz based roms will work.
I think the only aosp ROM that works is GPE 4.2.2 try that. But check its compatibility first
Sent from my Samsung Galaxy S4 (SGH-i337) via Tapatalk 4
all the google edition roms work with safestrap as far as I know, I've tested most of them. if it's one from another carrier the most you have to change are the apn settings. I'll be testing VirginROM later.
http://forum.xda-developers.com/showthread.php?t=2341376
http://forum.xda-developers.com/showthread.php?t=2356276
Just to be clear for OP
Google Edition (GE) roms are Touch Wiz---
Did not manage to turn WiFi on
deadenz said:
all the google edition roms work with safestrap as far as I know, I've tested most of them. if it's one from another carrier the most you have to change are the apn settings. I'll be testing VirginROM later.
http://forum.xda-developers.com/showthread.php?t=2341376
http://forum.xda-developers.com/showthread.php?t=2356276
Click to expand...
Click to collapse
thanks for the reply.
Tried ge4.2.2clean-20130907.zip, but it did not manage to turn WiFi during sign-in process.
Tried ge4.3clean-20130907.zip, this one did not boot at all.
Any tip? thanks
michaelkagan said:
thanks for the reply.
Tried ge4.2.2clean-20130907.zip, but it did not manage to turn WiFi during sign-in process.
Tried ge4.3clean-20130907.zip, this one did not boot at all.
Any tip? thanks
Click to expand...
Click to collapse
on the first boot of installing any rom, I always skip the initial setup. wait until the rom has booted first then add your google account and setup wifi and 4.3 roms are not compatible with safestrap
If you want a good GE 4.3 ROM, try this one:
http://forum.xda-developers.com/showthread.php?t=2395030
That's what I use as my daily driver. It works great, and is an untouched 4.3 GE ROM, except for the kernel. You can customize it yourself if you want before you install it.
chocodough said:
If you want a good GE 4.3 ROM, try this one:
http://forum.xda-developers.com/showthread.php?t=2395030
That's what I use as my daily driver. It works great, and is an untouched 4.3 GE ROM, except for the kernel. You can customize it yourself if you want before you install it.
Click to expand...
Click to collapse
4.3 roms don't work with safestrap.
It's been my understanding GE ones are TW based--
Got that from playing with KT's kernels
Maybe I am wrong--
rugmankc said:
It's been my understanding GE ones are TW based--
Got that from playing with KT's kernels
Maybe I am wrong--
Click to expand...
Click to collapse
Pretty sure you are right, I haven't installed a GE rom that hasn't worked yet
deadenz said:
Pretty sure you are right, I haven't installed a GE rom that hasn't worked yet
Click to expand...
Click to collapse
Currently only TouchWiz and GE 4.2.2 roms work. I tried GE 4.3 and it wouldn't turn on. Hopefully within the next week at&t treats us with a cookie and release 4.3 update.
DrXTC said:
Currently only TouchWiz and GE 4.2.2 roms work. I tried GE 4.3 and it wouldn't turn on. Hopefully within the next week at&t treats us with a cookie and release 4.3 update.
Click to expand...
Click to collapse
That's good info, didn't think about it stopping with 4.2.2--
chocodough said:
If you want a good GE 4.3 ROM, try this one:
http://forum.xda-developers.com/showthread.php?t=2395030
That's what I use as my daily driver. It works great, and is an untouched 4.3 GE ROM, except for the kernel. You can customize it yourself if you want before you install it.
Click to expand...
Click to collapse
It seems like this is ROM for i9505, my phone is i9500. WIll it work?
thanks,
Still could not make wifi work
deadenz said:
on the first boot of installing any rom, I always skip the initial setup. wait until the rom has booted first then add your google account and setup wifi and 4.3 roms are not compatible with safestrap
Click to expand...
Click to collapse
Tried to skip initial setup, but still WiFi would not turn on. Tried with ge4.2.2clean-20130907.zip
Any hint?
michaelkagan said:
Tried to skip initial setup, but still WiFi would not turn on. Tried with ge4.2.2clean-20130907.zip
Any hint?
Click to expand...
Click to collapse
did you flash the mf3 kernel module after you installed the rom?
You might get a lot more help here
Official AT&T S4 Safestrap Discussion Q/A
deadenz said:
did you flash the mf3 kernel module after you installed the rom?
Click to expand...
Click to collapse
No, I did not flash kernel, just installed ROM. SHould I flash kernel?
michaelkagan said:
No, I did not flash kernel, just installed ROM. SHould I flash kernel?
Click to expand...
Click to collapse
no. you should stop everything that you're doing and READ before you do anything else
http://forum.xda-developers.com/showthread.php?t=2428254
http://forum.xda-developers.com/showthread.php?t=2448925
http://blog.hash-of-codes.com/how-to-safestrap/
deadenz said:
no. you should stop everything that you're doing and READ before you do anything else
http://forum.xda-developers.com/showthread.php?t=2428254
http://forum.xda-developers.com/showthread.php?t=2448925
http://blog.hash-of-codes.com/how-to-safestrap/
Click to expand...
Click to collapse
thanks for the pointers.

I9505 KT-SGS4 won't boot

Hi!
After months of using my S4, I decided to flash custom ROM and kernel. Unfortunately, after flashing KT-SGS4 kernel, my phone gets stuck in Galaxy S4 logo and keeps flashing blue LED. I've tried using CM11 and AOKP, same results.
I hope, someone know how to fix it, thanks!
Mastirion said:
Hi!
After months of using my S4, I decided to flash custom ROM and kernel. Unfortunately, after flashing KT-SGS4 kernel, my phone gets stuck in Galaxy S4 logo and keeps flashing blue LED. I've tried using CM11 and AOKP, same results.
I hope, someone know how to fix it, thanks!
Click to expand...
Click to collapse
You have to factory reset when installing a custom rom
MrAndroid12 said:
You have to factory reset when installing a custom rom
Click to expand...
Click to collapse
I know, I'm always doing cache and data wipe. Roms are working correctly, but when i try to change kernel, this happens.
Then you are flashing the wrong kernel. There are 3 different types of that kernel.
Lennyz1988 said:
Then you are flashing the wrong kernel. There are 3 different types of that kernel.
Click to expand...
Click to collapse
I tried all of them in case if this one was wrong, maybe if there is said aosp, aokp is out of reach.

[Q] Problem after flash kernel

Hi Guys,
As you can see, I am new to this site. My phone is S4 19505. Yesterday, I tried to root my phone and that was a succes. Problem began when I want to install kernel for longer battery life. I have installed kernel from http://forum.xda-developers.com/showthread.php?t=2297379 and I have chosen Touchwiz KitKat 4.4 version. After I flashed this kernel my s4 is not starting. It just stuck at first screen "where we get first white letters samsung galaxy s4".
I have no idea what to do now.
Can anyone please help me?
Advance thanks.
safi_k19 said:
Hi Guys,
As you can see, I am new to this site. My phone is S4 19505. Yesterday, I tried to root my phone and that was a succes. Problem began when I want to install kernel for longer battery life. I have installed kernel from http://forum.xda-developers.com/showthread.php?t=2297379 and I have chosen Touchwiz KitKat 4.4 version. After I flashed this kernel my s4 is not starting. It just stuck at first screen "where we get first white letters samsung galaxy s4".
I have no idea what to do now.
Can anyone please help me?
Advance thanks.
Click to expand...
Click to collapse
Did you follow the instruction of the OP, wipe cache and wipe dalvik after installing it?
Interface23 said:
Did you follow the instruction of the OP, wipe cache and wipe dalvik after installing it?
Click to expand...
Click to collapse
Yes, I did everything as there said.
safi_k19 said:
Yes, I did everything as there said.
Click to expand...
Click to collapse
Are you using cmw or twrp? I believe your stock rom is 4.4 kitkat
Interface23 said:
Are you using cmw or twrp? I believe your stock rom is 4.4 kitkat
Click to expand...
Click to collapse
twrp. I dont know what you mean by stock rom because this is my first time I did. My device is running 4.4.2. and I chose for kernel 4.4 version of tw.
I think that you have to re-flash a new rom. Then, you have to retry installing root and the kernel.
msmlz said:
I think that you have to re-flash a new rom. Then, you have to retry installing root and the kernel.
Click to expand...
Click to collapse
I agree with msmlz, if you have nandroid restore it or download the firmware in sammobile and reflash it and before flashing the custom kernel again, read the thread, see if someone face bootloop like you. Hope someone with experience on it could help you, I never install custom kernel, just update the last stock kernel on my rooted stock rom.

Categories

Resources