I stupidly wiped everything before trying to sell my phone, i was unaware that it would remove the ROM. When i try to turn on the device i get stuck at the LG logo, and when i try to load a ROM using my flashdrive and an OTG cable, in TWRP it says 0MB for OTG. ADB in TWRP isnt working either, i have no more options. Please help im supposed to meet the guy in an hour and a half.
gearlo said:
I stupidly wiped everything before trying to sell my phone, i was unaware that it would remove the ROM. When i try to turn on the device i get stuck at the LG logo, and when i try to load a ROM using my flashdrive and an OTG cable, in TWRP it says 0MB for OTG. ADB in TWRP isnt working either, i have no more options. Please help im supposed to meet the guy in an hour and a half.
Click to expand...
Click to collapse
Download mode?
Related
Hi there,
So I did something really stupid and I wiped my phone while in recover mode trying to install a new ROM. And now I'm stuck with a useless phone that can only go into TWRP and Firmware Update Mode.
I've tried every method to unbrick my phone, and have a previous thread on this forum trying to get help (http://forum.xda-developers.com/showthread.php?p=48914581#post48914581), but nothing is working.
My question now is I'm running TWRP 6.3.2.2, If I buy a USB OTG cable and put my rom files on a USB thumbdrive, can I then install the rom from the usb? If so, where in the filesystem does this usb storage show up?
BraydenJW said:
Hi there,
So I did something really stupid and I wiped my phone while in recover mode trying to install a new ROM. And now I'm stuck with a useless phone that can only go into TWRP and Firmware Update Mode.
I've tried every method to unbrick my phone, and have a previous thread on this forum trying to get help (http://forum.xda-developers.com/showthread.php?p=48914581#post48914581), but nothing is working.
My question now is I'm running TWRP 6.3.2.2, If I buy a USB OTG cable and put my rom files on a USB thumbdrive, can I then install the rom from the usb? If so, where in the filesystem does this usb storage show up?
Click to expand...
Click to collapse
I believe only TWRP 2.6.3.4 can support OTG (I've been happy with it).
I think you may have to ADB push the files from PC over while in recovery (may need to look around).
Ok so I was trying to install CM13, so i read something on a forum (I think XDA), and installed this zip that I downloaded from the website then installed the zip from my custom recovery, and then restarted, and I could boot into CM13, but then I lost my custom recovery! (TWRP). When I try to go to the factory reset screen when the phone is off, I select all the Yes delete data stuff, because that's how I got into my custom recovery, but now it says secure boot error, certification error, etc. and just boots into a black screen. So the only option that I am stuck with, is i figured how to get it into the firmware update mode (download mode), but no custom recovery, and when I connect it to the LG Mobile Support tool, It doesn't say it is connected, I have installed the drivers like 3 times, and my phone keeps connecting and disconnecting from my computer (I can hear the ding sound each time it disconnects randomly and connects randomly. I have no idea what to do. Am I out of luck? Pleeeeaseee help!!!!
LG model D803 Canadian version, was running 5.1 CM12 just fine before until i decided to update and this crap started happening
Have you tried different USB cables and different USB ports?
audit13 said:
Have you tried different USB cables and different USB ports?
Click to expand...
Click to collapse
Yes I have, still doesn't work but thanks anyways
Ok, first of all, I was at TWRP recovery trying to flash a 4.4.2 rom with all wiped, but I couldn't and I left the phone turned on in TWRP and I went to buy an otg cable to flash the rom, when I arrived home the screen was black and I can't do nothing, is as the phone were turned off but I can't do nothing, it doesn't turn on, I can't get into any of the 2 modes and when I connect to the computer the phone it says that the computer doesn't recognize my phone, it doesn't appears the charging logo, pls someone can help me? I have an lg g2 D802
TheSkyRay said:
Ok, first of all, I was at TWRP recovery trying to flash a 4.4.2 rom with all wiped, but I couldn't and I left the phone turned on in TWRP and I went to buy an otg cable to flash the rom, when I arrived home the screen was black and I can't do nothing, is as the phone were turned off but I can't do nothing, it doesn't turn on, I can't get into any of the 2 modes and when I connect to the computer the phone it says that the computer doesn't recognize my phone, it doesn't appears the charging logo, pls someone can help me? I have an lg g2 D802
Click to expand...
Click to collapse
Check if you are able to access download mode.
If not, check if you can go to recovery.
If both fails, then follow this guide : http://forum.xda-developers.com/showthread.php?t=2582142
The battery. BTW you don't need the otg USB you can use adb command while on twrp.
Oh yea the twrp used many layer of locking you need to swap again and again
Sent from my LG-D802 using XDA-Developers mobile app
I have a dilemma. This morning my usb was working fine but I needed to get back to stock and unrooted. I flashed the system.img from the NDR90X factory image and wiped my data (not userdata however because I didn't want to lose everything) the phone booted up just fine and operates fine, other then it doesn't mount on my pc anymore. fastboot and adb do not work for me either. I tried mounting on both windows and linux, I tried using another computer, and I have tried mounting through the recovery. none of these have worked. I cant try going back to complete stock because fastboot is not recognizing the device either. the phone still charges fine with no problems. But I still am getting the feeling that maybe the usb port has malfunction. I was hoping that maybe someone could help me with this problem and reaching a solution. I don't know if I can contact google about this problem because my device cannot be returned to completely stock.
I forgot to mention that after flashing the stock system.img I also flashed TWRP, and since then I am back on a custom rom to see if maybe that would fix my problem. However it still persists.
I have uploaded a picture showing what error message I am getting on windows.
Reinstall the USB drivers
hd-renegade said:
Reinstall the USB drivers
Click to expand...
Click to collapse
Turns out it was the USB that doesn't work. When I got home I tried another USB that I have and it works fine.
Sent from my AOSP on angler using Tapatalk
Hello,
After rooting the system I tried to upgrade the stock firmware.
I probably did something wrong because now the device won't boot.
At startup it shows the "Nubia... Powered by android" screen and does not continue with the boot process.
I still have access to TWRP so I tried to wipe everything and to install the ROM from TWRP.
It looks as if the ROM is installed correctly, but it requires reboot and after reboot the same "Nubia... Powered by android" screen comes up.
I also tried the emergency recovery but that installs only from external sd card (that the Z17 lite does not have), or from OTG device. I connected a USB thumb drive with OTG cable but it doesn't recognize it
At this point I have no idea what else to do.
I'd be happy for any assistance.
TIA
yaccri said:
Hello,
After rooting the system I tried to upgrade the stock firmware.
I probably did something wrong because now the device won't boot.
At startup it shows the "Nubia... Powered by android" screen and does not continue with the boot process.
I still have access to TWRP so I tried to wipe everything and to install the ROM from TWRP.
It looks as if the ROM is installed correctly, but it requires reboot and after reboot the same "Nubia... Powered by android" screen comes up.
I also tried the emergency recovery but that installs only from external sd card (that the Z17 lite does not have), or from OTG device. I connected a USB thumb drive with OTG cable but it doesn't recognize it
At this point I have no idea what else to do.
I'd be happy for any assistance.
TIA
Click to expand...
Click to collapse
UPDATE: I tried different USB drives. One of them mounted. I found that this one was formatted in FAT. Since this is a small 2Gb drive that cannot hold the ROM, I found another drive that was formatted in ExFAT that also loaded correctly.
I loaded the ROM as suggested and now the phone is working again.
My guess is that the phone can't read NTFS file format in emergency recovery mode.