Database Users

[Q] Cannot unroot/unbrick my SM-N9005 on bobcat rom 4.4

Hi there....
i rooted my Note 3 LTE SM-N9005 and had it flashed with bobcat rom 4.4. then i had dropped my phone and having some issues with screen. Now i need to flash it with custom rom. I hope I've done everything as per instructions to odin the phone using the default stock rom N9005XXUDMJ7_N9005TMNDMK1_N9005XXUDMJ7_HOME.tar (Bought the phone from Dubai, UAE; my friend's phone is with the same firmware which was bought in the very same outlet)
But when i try to unroot it, everything goes good till finally the left upper box turns red and says "FAIL!" following is the progress i do get during unroot process.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005TMNDMK1_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
I don't have an idea on what should have gone wrong here. Tried not less than 10times using different Odin versions too, but still the result was same.
Guys, Please give me hand to get my phone back to life. I cannot boot my phone now. another custom rom in my internal memory but cannot boot into recovery either. What should i do? is there any other way to unroot/unbrick my precious (for me) mobile.?
Thanks in advance for all your time and effort put to save my ass.

Am not sure but i think you get this error because you are trying to downgrade from 4.4.2 to 4.3 that not working anymore on samsung at least for the mean time.
Go to sammobile and download the official kitkat (poland) then flash it via Odin
Sent from my SM-N9005 using Tapatalk

Dahdoul said:
Am not sure but i think you get this error because you are trying to downgrade from 4.4.2 to 4.3 that not working anymore on samsung at least for the mean time.
Go to sammobile and download the official kitkat (poland) then flash it via Odin
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks a lot for the instruction bro... going to download it... and will give the feedback when i try it...
thanks again.

mhrdeena said:
Thanks a lot for the instruction bro... going to download it... and will give the feedback when i try it...
thanks again.
Click to expand...
Click to collapse
No problem ? and make sure you download the unbranded firmware (Poland XEO)
check this thread
http://forum.xda-developers.com/showthread.php?t=2610444
Sent from my SM-N9005 using Tapatalk

delega cattrit
Dahdoul said:
No problem ? and make sure you download the unbranded firmware (Poland XEO)
check this thread
http://forum.xda-developers.com/showthread.php?t=2610444
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
yeah,I've selected the same. but seems like terrafile.co, the file hosting website is under maintenance right now. I will have to wait till they resume back to normal.

mhrdeena said:
yeah,I've selected the same. but seems like terrafile.co, the file hosting website is under maintenance right now. I will have to wait till they resume back to normal.
Click to expand...
Click to collapse
MEGA Link for you

[Q] Galaxy Note 3 SM-N9005 LTE Softbrick(international)

I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it

Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/

I had the same problem. Flash the device by using a PIT file and have repartition selected. It will wipe all your data but it worked for me.
Sent from my SM-N9005 using Tapatalk
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
Sorry, I'm not sure about the previous solution given, I just know my way worked for me.
Sent from my SM-N9005 using Tapatalk

Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md 5 >> is not 4.4.2 (KK) rom. You are trying to downgrade your phone. Download the latest KK firmware and then reflash and see how it goes.

jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!

Afzaal said:
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue

redox990 said:
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue
Click to expand...
Click to collapse
are you sure its saying that is your total amount of ram? or is it just your available/currently used ram?
if you have 3gb total ram, the available ram will always be less than that.. depending on what else is running at the time, so it will change frequently.
for e.g my note 3 currently says RAM STATUS 1.38GB/2.71GB
2.71GB = total ram (it will always display slightly less than the supposed 3GB that it has)
1.38GB = either amount of ram currently in use or amount of ram currently available (im not sure which way they do it)
but if the second number is anywhere close to 3GB, theres nothing wrong.

same problem probably same phone (
jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?

ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks

ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
If its a same problem as OP u can flash XEO ROM, Its a stable rom.

dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
jdomadia said:
If its a same problem as OP u can flash XEO ROM, Its a stable rom.
Click to expand...
Click to collapse
i try but i will try different versions of XEO.
Thanx.

ohayyam said:
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
i try but i will try different versions of XEO.
Thanx.
Click to expand...
Click to collapse
will resolve ur problem with or without efs backup

dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx

ohayyam said:
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx
Click to expand...
Click to collapse
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language

How EFS Pro works ???
dul-faqar said:
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language
Click to expand...
Click to collapse
Do you mean if i back up my softbricked N9005 with EFS pro, my network will work? how ???
i already try back up working N9005 efs files to PC then connect softbricked N9005 and restore on it still not working ?
but i will try for to backup as you advice

Data connection only works on CyanogenMod

Hi everyone !
I'm Matt, a Belgian student so don't be afraid of my english !
So I've a SM-G900F since September. Three weeks after bought it, I changed the ROM ! I put a port of CM11. After that, every rom ROM that i've flashed (exept Cyanogen ) was bugged. When i say bugged, i talk about the data connection. Once very slow, once not functionately,... Firstly, i thonk that that was a problem on the APN but i check that and that's not. After that, I asked me over the MODEM so i said, Ok , I'm going to put the original firmware from SamMobile ( The belgian firmware ) with Odin. Yesterday I did it BUT , at the end, they were an error Message ! That was something like that :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
So i search that on XDA and i found that i had to put the firmware of my country (http://forum.xda-developers.com/showthread.php?t=2641965) but that's my coutry's firmware ! So after this failed message, i put CWM recovery on PDA section and my phone booted ! But since that, I can't use any data connection exept on cyanogen. And today, i looked at the G900F of a friend and that was the same baseband ... ANG2 for Belgium ....
Thx for reading and i hope that i'll find a member that he can resolve my problem ! See u

Try to flash this, I found this firmware with information you provided.
Model: SM-G900F
Country: Belgium
(you are responsible for your actions)
http://www.sammobile.com/firmwares/download/33819/G900FXXU1ANG9_G900FPRO1ANG3_PRO.zip/
Sent from my SM-G906S using XDA Premium 4 mobile app

Probably s problem with your modem / baseband, flash a new one.

dladz said:
Probably s problem with your modem / baseband, flash a new one.
Click to expand...
Click to collapse
And do you know a site where i can find some modem ? Or extract a part of a ROM ?

Matt-2905 said:
And do you know a site where i can find some modem ? Or extract a part of a ROM ?
Click to expand...
Click to collapse
Not off hand no, I would have to search and i'm sure we'd yield the same results so i'll leave that to you, if you're rooted and have a custom recovery, have no problem using odin, then i'd flash Neat Rom's rom, there's a tutorial in there which links to a bootloader and modem, ang3 I believe or AMG3, can't remember exactly, but that one works for me so try that.

If i've been understand, you think that i have to flash AMG3 Modem part ? Did u ever heart something like that ?

Odin fail with aboot.mbn

Bought a new Galaxy S5 G900F privately and noticed I am not getting any updates, the phone is rooted. So I decided to go back to stock, but after following the how-to guides, I get to the point where Odin (any version - 3.09 down to 3.04) fails with the error:
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone I get the message : Secure Check Fail: Aboot.
I have double checked that the Reactivation lock is unchecked, and the Developer options are enabled.
Not really sure where to go from here. I am using the "G900FXXU1BOC7_G900FO2U1BOC1_O2U.zip" stock firmware. There are no labels on the original box that indicates the phone is locked to any particular region. Current android version is 4.4.2 with a build number of S5G900FXXU1ANJ1.
Any help appreciated.
Adrian

Hello,
It is a error caused by your CSC. You must find original CSC and download ROM with original CSC. Don't matter if phone is locked in an network, matter only the CSC.
Sent from my SM-G901F using Tapatalk 2

bogdan109 said:
Hello,
It is a error caused by your CSC. You must find original CSC and download ROM with original CSC. Don't matter if phone is locked in an network, matter only the CSC.
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
Right. Thank you. Any idea how I will find out what my original CSC was?
Adrian

Now phone it is working? You can install from google play, samsung phone info, or you can connect with PC and view what CSC you have from Kies. Last option it is to restore last firmware from Kies.
Sent from my SM-G901F using Tapatalk 2

bogdan109 said:
Now phone it is working? You can install from google play, samsung phone info, or you can connect with PC and view what CSC you have from Kies. Last option it is to restore last firmware from Kies.
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
Excellent. Thank you. Yes, the phone is working and after installing the phone info, I can see the CSC is from Poland. So now I know that the stock firmware was wrong (was getting the UK version). Trying to get the poland stock firmware from Sammobile, but getting "bad gateway" errors. Any other reliable place to source these images?
Adrian

Just copy name of right firmare from sammobile and search on google. I think it is another site, something like this: http://samsung-updates.com/
Sent from my SM-G901F using Tapatalk 2

Damn!
Unfortunately I get the same error after downloading the polish version, according to the samsung info app:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOE5_G900FXEO1BOF1_G900FXXU1BOE5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I tried this with both Odin 3.09 and 3.04. Is there a problem going directly to Lollipop from 4.4.2? Should I try the 4.4.2 firmware first?
Anything else that I can try?

I tried with the Kit Kat version this time and received the following error (which looks to be similar to the other):
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANJ1_G900FXEO1ANJ1_G900FXXU1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Scratching my head...

What CSC do you have?
Sent from my SM-G901F using Tapatalk 2

bogdan109 said:
What CSC do you have?
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
Product Code: SM-G900AZKAXEO
Original CSC Code: XEO
Firmware's CSC Code: XEO
Active CSC Code: XEO
CSC Country: Poland

Did u flash this stock rom ??
http://www.sammobile.com/firmwares/download/40283/G900FXXU1BNL7_G900FXEO1BNL1_XEO.zip/
try to flash the best compatible software
and use the latst odin

I am also not able to connect the phone to Kies - The device driver never installs correctly. I have tried installing Kies again after fully removing it, as well as installing the separate device driver "SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.25.0-retail"
Perhaps the two have something in common?
Adrian

vinura kithmal said:
Did u flash this stock rom ??
http://www.sammobile.com/firmwares/download/40283/G900FXXU1BNL7_G900FXEO1BNL1_XEO.zip/
try to flash the best compatible software
and use the latst odin
Click to expand...
Click to collapse
Downloading that one now - the other XEO one that I have tried is G900FXXU1BOE5_G900FXEO1BOF1_XEO.zip. Not sure what the difference is, but I will attempt to flash it when its finished. Thanks for the help!
Adrian

This is the latest firmware for your CSC with the latest bootloader
http://www.sammobile.com/firmwares/download/48389/G900FXXU1BOE5_G900FXEO1BOF1_XEO/
Use a later version of odin again
extremely sorry for the last firmware with a little outdated

vinura kithmal said:
This is the latest firmware for your CSC with the latest bootloader
http://www.sammobile.com/firmwares/download/48389/G900FXXU1BOE5_G900FXEO1BOF1_XEO/
Use a later version of odin again
extremely sorry for the last firmware with a little outdated
Click to expand...
Click to collapse
Yep, I have tried that one, but it gives me the error.
Adrian

adrianjm said:
Product Code: SM-G900AZKAXEO
Original CSC Code: XEO
Firmware's CSC Code: XEO
Active CSC Code: XEO
CSC Country: Poland
Click to expand...
Click to collapse
YO BRO
SERIOUSLY
ARE U SURE YOU BOUGHT G900F
YOUR PRODUT CODE SAYS ITS A G900A
SERIOUSLY WHAT IS YOUR PHONE MODEL
YOU HAVE STARTED THE THREAD TELLING THAT YOU HAVE A G900F
---------- Post added at 01:15 PM ---------- Previous post was at 01:13 PM ----------
Install phone info app from playstore and see what is your real phone model,pda and csc
i think your going to install the wrong model
thats why i think odin is not doing the process
common bro

If you have a G900F
your product code have to be like this

adrianjm said:
Product Code: SM-G900AZKAXEO
Original CSC Code: XEO
Firmware's CSC Code: XEO
Active CSC Code: XEO
CSC Country: Poland
Click to expand...
Click to collapse
i also think that you have a G900A
um not sure
in my device also it says product code :SM-G900FZKASIN
and it is a G900F

In settings/about device:
Model Number: SM-G900F
Build Number: S5G900FXXU1ANJ1
Baseband Version: G900AUCU2AND3
Behind the Battery it states: Model SM-G900F.
So I think its a 900F.
On Sammobile, the only firmware available for a 900a is from ATT?? Downloading this firmware to see if it will flash.
Adrian

Your product code is the problem
hmmmm it a lil confusing,post this on sammobile forums or wait for a recognise contributer to reply
Your previous user might have flashed a custom modem and bootloader I THINK
But i dont know why the later version of odin not doing it for you
This is not a problem with your firmware
you can flash any CSC firmwares from odin
its not a big deal
try to install samsung drivers properly(samsung kies may work too) and try again
---------- Post added at 02:16 PM ---------- Previous post was at 02:09 PM ----------
use this app from samsung bro
it'll do the process nicely
download the pc version from here
http://www.techspot.com/downloads/6086-samsung-smart-switch.html

BTU G900F, Marshmallow bootloader won't flash

I've been trying to flash Marshmallow on my BTU G900F, but it won't actually flash the bootloader. Odin reports successful but bootloader is still the old version and MM won't boot. Any suggestions? So far I've tried a few versions of Odin and the Sri Lanka and Netherlands MM roms and with/without ticking bootloader update in Odin.
Odin log:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> rpm.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> tz.mbn
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> NON-HLOS.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!

Put the phone off, or remove the battery from it for about 15 seconds.
And boot directly to download mode. And oh, you should flash bootloaders along with modems!
Hope this helps.
Happy flashing

Are you flashing the modded BTU MM ROM?
This one works for my G900F BTU
Code:
https://mega.nz/#!SMRlERrY!oeOX8W_4tbQbArTN-LzTKWJ1xi_8LLrN_ZoSg-Dzs1Q

Greatness_GH said:
Put the phone off, or remove the battery from it for about 15 seconds.
And boot directly to download mode. And oh, you should flash bootloaders along with modems!
Hope this helps.
Happy flashing
Click to expand...
Click to collapse
I'll give that a try tomorrow. I'm flashing both. Forgot to say, I've even factory reset and flashed the whole stock rom and it still wouldn't update it.
*Detection* said:
Are you flashing the modded BTU MM ROM?
This one works for my G900F BTU
Code:
https://mega.nz/#!SMRlERrY!oeOX8W_4tbQbArTN-LzTKWJ1xi_8LLrN_ZoSg-Dzs1Q
Click to expand...
Click to collapse
Thanks, if the above fails, I'll try that.

No need to flash separate bootloaders and modems with the modded one
It is a stock G900F Marshmallow ROM, the only mod is to convert it to BTU and remove a partition that wiped the phone during install

Hey i want help i have galaxy s5 sm-g900f and m still on lolipop i want to manually install marshmallow but my device is by three.co.uk career can u send me a appropriate link plzzzzz...
Thnks in advance !!!

Harsh_singh said:
Hey i want help i have galaxy s5 sm-g900f and m still on lolipop i want to manually install marshmallow but my device is by three.co.uk career can u send me a appropriate link plzzzzz...
Thnks in advance !!!
Click to expand...
Click to collapse
BTU should work fine with Three

Help
*Detection* said:
BTU should work fine with Three
Click to expand...
Click to collapse
I checked on sammobile, g900f btu doesn't get a marshmallow update yet???

Harsh_singh said:
I checked on sammobile, g900f btu doesn't get a marshmallow update yet������
Click to expand...
Click to collapse
Figured that my device is h3g and there is no update available by three yet so i think i will wait for official firmware to be aired but thats for ur concern

Harsh_singh said:
I checked on sammobile, g900f btu doesn't get a marshmallow update yet������
Click to expand...
Click to collapse
G900F 6.0.1 Stock (Just modded to change the region to BTU)
Code:
https://mega.nz/#!SMRlERrY!oeOX8W_4tbQbArTN-LzTKWJ1xi_8LLrN_ZoSg-Dzs1Q
Will trip KNOX

Greatness_GH said:
Put the phone off, or remove the battery from it for about 15 seconds.
And boot directly to download mode. And oh, you should flash bootloaders along with modems!
Hope this helps.
Happy flashing
Click to expand...
Click to collapse
Thanks, that worked And it seems it failing to boot was caused by using system-mode supersu

NHellFire said:
Thanks, that worked And it seems it failing to boot was caused by using system-mode supersu
Click to expand...
Click to collapse
Great! I'm glad it worked. Welcome back