Hi everyone !
I'm Matt, a Belgian student so don't be afraid of my english !
So I've a SM-G900F since September. Three weeks after bought it, I changed the ROM ! I put a port of CM11. After that, every rom ROM that i've flashed (exept Cyanogen ) was bugged. When i say bugged, i talk about the data connection. Once very slow, once not functionately,... Firstly, i thonk that that was a problem on the APN but i check that and that's not. After that, I asked me over the MODEM so i said, Ok , I'm going to put the original firmware from SamMobile ( The belgian firmware ) with Odin. Yesterday I did it BUT , at the end, they were an error Message ! That was something like that :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
So i search that on XDA and i found that i had to put the firmware of my country (http://forum.xda-developers.com/showthread.php?t=2641965) but that's my coutry's firmware ! So after this failed message, i put CWM recovery on PDA section and my phone booted ! But since that, I can't use any data connection exept on cyanogen. And today, i looked at the G900F of a friend and that was the same baseband ... ANG2 for Belgium ....
Thx for reading and i hope that i'll find a member that he can resolve my problem ! See u
Try to flash this, I found this firmware with information you provided.
Model: SM-G900F
Country: Belgium
(you are responsible for your actions)
http://www.sammobile.com/firmwares/download/33819/G900FXXU1ANG9_G900FPRO1ANG3_PRO.zip/
Sent from my SM-G906S using XDA Premium 4 mobile app
Probably s problem with your modem / baseband, flash a new one.
dladz said:
Probably s problem with your modem / baseband, flash a new one.
Click to expand...
Click to collapse
And do you know a site where i can find some modem ? Or extract a part of a ROM ?
Matt-2905 said:
And do you know a site where i can find some modem ? Or extract a part of a ROM ?
Click to expand...
Click to collapse
Not off hand no, I would have to search and i'm sure we'd yield the same results so i'll leave that to you, if you're rooted and have a custom recovery, have no problem using odin, then i'd flash Neat Rom's rom, there's a tutorial in there which links to a bootloader and modem, ang3 I believe or AMG3, can't remember exactly, but that one works for me so try that.
If i've been understand, you think that i have to flash AMG3 Modem part ? Did u ever heart something like that ?
Related
Hi there....
i rooted my Note 3 LTE SM-N9005 and had it flashed with bobcat rom 4.4. then i had dropped my phone and having some issues with screen. Now i need to flash it with custom rom. I hope I've done everything as per instructions to odin the phone using the default stock rom N9005XXUDMJ7_N9005TMNDMK1_N9005XXUDMJ7_HOME.tar (Bought the phone from Dubai, UAE; my friend's phone is with the same firmware which was bought in the very same outlet)
But when i try to unroot it, everything goes good till finally the left upper box turns red and says "FAIL!" following is the progress i do get during unroot process.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005TMNDMK1_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
I don't have an idea on what should have gone wrong here. Tried not less than 10times using different Odin versions too, but still the result was same.
Guys, Please give me hand to get my phone back to life. I cannot boot my phone now. another custom rom in my internal memory but cannot boot into recovery either. What should i do? is there any other way to unroot/unbrick my precious (for me) mobile.?
Thanks in advance for all your time and effort put to save my ass.
Am not sure but i think you get this error because you are trying to downgrade from 4.4.2 to 4.3 that not working anymore on samsung at least for the mean time.
Go to sammobile and download the official kitkat (poland) then flash it via Odin
Sent from my SM-N9005 using Tapatalk
Dahdoul said:
Am not sure but i think you get this error because you are trying to downgrade from 4.4.2 to 4.3 that not working anymore on samsung at least for the mean time.
Go to sammobile and download the official kitkat (poland) then flash it via Odin
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks a lot for the instruction bro... going to download it... and will give the feedback when i try it...
thanks again.
mhrdeena said:
Thanks a lot for the instruction bro... going to download it... and will give the feedback when i try it...
thanks again.
Click to expand...
Click to collapse
No problem ? and make sure you download the unbranded firmware (Poland XEO)
check this thread
http://forum.xda-developers.com/showthread.php?t=2610444
Sent from my SM-N9005 using Tapatalk
delega cattrit
Dahdoul said:
No problem ? and make sure you download the unbranded firmware (Poland XEO)
check this thread
http://forum.xda-developers.com/showthread.php?t=2610444
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
yeah,I've selected the same. but seems like terrafile.co, the file hosting website is under maintenance right now. I will have to wait till they resume back to normal.
mhrdeena said:
yeah,I've selected the same. but seems like terrafile.co, the file hosting website is under maintenance right now. I will have to wait till they resume back to normal.
Click to expand...
Click to collapse
MEGA Link for you
I am trying to update to kitkat and keep failing in odin near the end of the process - see messages below. Has anyone else seen this and how can I overcome the problem?
Thanks
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pjh2903 said:
I am trying to update to kitkat and keep failing in odin near the end of the process - see messages below. Has anyone else seen this and how can I overcome the problem?
Thanks
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Flash XEO Poland version & report.
Thanks
Loaded Poland version and everything worked OK, Just wonder why the German DTM version would not work.
pjh2903 said:
Loaded Poland version and everything worked OK, Just wonder why the German DTM version would not work.
Click to expand...
Click to collapse
File size differences between branded & Unbranded firmwares.
pjh2903 said:
Loaded Poland version and everything worked OK, Just wonder why the German DTM version would not work.
Click to expand...
Click to collapse
LINK changed N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME - just flash via Odin over the Polish one
KNOX stays 0/0
THANK YOU!!!!
jdomadia said:
File size differences between branded & Unbranded firmwares.
Click to expand...
Click to collapse
Dude you really ****ing saved me ))))))) u have no IDE how greatfule i am to you.. I have been looking around the net for several 6-8 hour I thought I had bricked the phone)))
Now ATLAST it is up and running thank you so very much
Schutzi said:
Dude you really ****ing saved me ))))))) u have no IDE how greatfule i am to you.. I have been looking around the net for several 6-8 hour I thought I had bricked the phone)))
Now ATLAST it is up and running thank you so very much
Click to expand...
Click to collapse
Happy I am able to help u.Cheers
Same..
Hi guys, thanks for this post.
Had the same problem and right now downloading Polish XEO N9005XXUENA6 version. Is it right version to overwright this German, or should use some another? Thank you..
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
I had the same problem. Flash the device by using a PIT file and have repartition selected. It will wipe all your data but it worked for me.
Sent from my SM-N9005 using Tapatalk
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
Sorry, I'm not sure about the previous solution given, I just know my way worked for me.
Sent from my SM-N9005 using Tapatalk
Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md 5 >> is not 4.4.2 (KK) rom. You are trying to downgrade your phone. Download the latest KK firmware and then reflash and see how it goes.
jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Afzaal said:
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue
redox990 said:
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue
Click to expand...
Click to collapse
are you sure its saying that is your total amount of ram? or is it just your available/currently used ram?
if you have 3gb total ram, the available ram will always be less than that.. depending on what else is running at the time, so it will change frequently.
for e.g my note 3 currently says RAM STATUS 1.38GB/2.71GB
2.71GB = total ram (it will always display slightly less than the supposed 3GB that it has)
1.38GB = either amount of ram currently in use or amount of ram currently available (im not sure which way they do it)
but if the second number is anywhere close to 3GB, theres nothing wrong.
same problem probably same phone (
jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
If its a same problem as OP u can flash XEO ROM, Its a stable rom.
dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
jdomadia said:
If its a same problem as OP u can flash XEO ROM, Its a stable rom.
Click to expand...
Click to collapse
i try but i will try different versions of XEO.
Thanx.
ohayyam said:
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
i try but i will try different versions of XEO.
Thanx.
Click to expand...
Click to collapse
will resolve ur problem with or without efs backup
dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx
ohayyam said:
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx
Click to expand...
Click to collapse
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language
How EFS Pro works ???
dul-faqar said:
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language
Click to expand...
Click to collapse
Do you mean if i back up my softbricked N9005 with EFS pro, my network will work? how ???
i already try back up working N9005 efs files to PC then connect softbricked N9005 and restore on it still not working ?
but i will try for to backup as you advice
My Galaxy Tab 4.7.0 stopped working when I tried to erase an app. So I have Team Win Recovery installed. At first I though it was a firmware issue so I had it flashed. Then I realized every time I reboot or power off it says, "No OS Installed." I must have erased it when I used factory reset. So what can I do?
Sam B. said:
My Galaxy Tab 4.7.0 stopped working when I tried to erase an app. So I have Team Win Recovery installed. At first I though it was a firmware issue so I had it flashed. Then I realized every time I reboot or power off it says, "No OS Installed." I must have erased it when I used factory reset. So what can I do?
Click to expand...
Click to collapse
You are dealing with a "bug" common/specific to TWRP
boot into TWRP and use the format data option to correct your data partition, before you do that though,
run adb and pull any important files from internal storage.
m
moonbutt74 said:
You are dealing with a "bug" common/specific to TWRP
boot into TWRP and use the format data option to correct your data partition, before you do that though,
run adb and pull any important files from internal storage.
m
Click to expand...
Click to collapse
That didn't work. I still get the "No OS Installed!" Is there a way to install the operating system from somewhere?
Sam B. said:
That didn't work. I still get the "No OS Installed!" Is there a way to install the operating system from somewhere?
Click to expand...
Click to collapse
Use Odin to flash that firmware file I was telling you about earlier. It has the OS included in it
thisisapoorusernamechoice said:
Use Odin to flash that firmware file I was telling you about earlier. It has the OS included in it
Click to expand...
Click to collapse
That was the first thing I did. It didn't work. I guess I could try it again.
Sam B. said:
That was the first thing I did. It didn't work. I guess I could try it again.
Click to expand...
Click to collapse
Copy ODIN log , please .
repey6 said:
Copy ODIN log , please .
Click to expand...
Click to collapse
This is what the log stated:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T230NUUEU0AOC1_T230NUXAR0AOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
thisisapoorusernamechoice said:
Use Odin to flash that firmware file I was telling you about earlier. It has the OS included in it
Click to expand...
Click to collapse
Sorry for replying so late, I've been busy. I tried to flash again and still no luck. It also says the device isn't rooted, could that be the problem why the flash isn't working? I tried to
re-root, but that's not working. I do not know what else to do.
Sam B. said:
This is what the log stated:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T230NUUEU0AOC1_T230NUXAR0AOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
Click to expand...
Click to collapse
This is not the entire log file
repey6 said:
This is not the entire log file
Click to expand...
Click to collapse
That's all that was on the log page.
Sam B. said:
That's all that was on the log page.
Click to expand...
Click to collapse
This is full right log file
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> param.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!
---------- Post added at 05:17 AM ---------- Previous post was at 05:14 AM ----------
For example
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<ID:0/006> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
repey6 said:
This is full right log file
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> param.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!
---------- Post added at 05:17 AM ---------- Previous post was at 05:14 AM ----------
For example
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<ID:0/006> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Click to expand...
Click to collapse
What version of Odin are you using? Because when I connect my tablet, all that's stated is was I had posted before, nothing else. But after reading what is suppose to logged, it may seem the system and everything else was wiped and or corrupted. The tablet starts up to the first screen, and just stays there. A few things I forgot to mention was; at one point when I connected the tab to my laptop, it open the storage which was recognized as Dalvik, or something like that. And this whole situation took place when I installed an app called Freedom. I tried to get rid of it, but Google Play refused to let me login. So I factory reset. It could also be the app Lucky Patcher too. I tried to modify the Google Play to try and see if it would fix the login issues. And I ended having to uninstall the current version of Play to an earlier version.. So I'm at a loss on what to do. I'm might end up getting a new one if there are no other solutions.
My Galaxy Tab 4 (US Cellular), model SM-T537R4 will NOT enter 'download' mode in the usual way (On+VOL-). It simply ignores this and boots into the US Cellular screen, then boots as normal.
Is there any way to access download mode, other than the ON + Vol- method?
[email protected] said:
My Galaxy Tab 4 (US Cellular), model SM-T537R4 will NOT enter 'download' mode in the usual way (On+VOL-). It simply ignores this and boots into the US Cellular screen, then boots as normal.
Is there any way to access download mode, other than the ON + Vol- method?
Click to expand...
Click to collapse
You have to hold ON + Vol- + Home button (all three)
Sam B. said:
What version of Odin are you using? Because when I connect my tablet, all that's stated is was I had posted before, nothing else. But after reading what is suppose to logged, it may seem the system and everything else was wiped and or corrupted. The tablet starts up to the first screen, and just stays there. A few things I forgot to mention was; at one point when I connected the tab to my laptop, it open the storage which was recognized as Dalvik, or something like that. And this whole situation took place when I installed an app called Freedom. I tried to get rid of it, but Google Play refused to let me login. So I factory reset. It could also be the app Lucky Patcher too. I tried to modify the Google Play to try and see if it would fix the login issues. And I ended having to uninstall the current version of Play to an earlier version.. So I'm at a loss on what to do. I'm might end up getting a new one if there are no other solutions.
Click to expand...
Click to collapse
At first you must to install USB drivers on your PC http://developer.samsung.com/technical-doc/view.do?v=T000000117#none .
Then go to download mode on your device .
Then connect to PC and install your firmware via Odin . ( this instruction how install firmware via Odin , for example :
http://www.sammobile.com/firmwares/download/45899/T230XXU0AOC1_T230ITV0AOC2_ITV/ ).
Second variant : restoring firmware with Kies .
Is there a CyanogenMod update I can flash to a Galaxy Tab 4 (US Cellular), model SM-T537R4 (rooted) using Odin? With TWRP?
[email protected] said:
Is there a CyanogenMod update I can flash to a Galaxy Tab 4 (US Cellular), model SM-T537R4 (rooted) using Odin? With TWRP?
Click to expand...
Click to collapse
Unfortunately I don't think there are any custom roms compatible with your tablet model available yet. Sorry
Although, thanks, did not know about your model number. Will be added to my firmware collection ASAP
Yeah I'm blushing writing this message. It turns out, you're suppose to press the start button on odin to see if the firmware is compatible; I think. Then press again to install it. Wow! I'll admit, I never was never that computer-savvy, but DAMN! This is a new low for me.
Please Update this Problem
Hi Sam, Please let me know if you fixed your problem. I Think I have the same situation. My computer does Not recognize the Galaxy Tab 4. I can put the Tab into download but....computer does not see the tab. Help Please???!!!! Thanks Harold
Sam B. said:
Yeah I'm blushing writing this message. It turns out, you're suppose to press the start button on odin to see if the firmware is compatible; I think. Then press again to install it. Wow! I'll admit, I never was never that computer-savvy, but DAMN! This is a new low for me.
Click to expand...
Click to collapse
I have an SCH-i545 S4. It was running Jelly Bean 4.3 at the time rooted using Super SU and still have TWRP recovery.
I was trying to install the new lollipop update manually and forgot to switch from stock to a ROM slot in TWRP recovery and wiped the stock ROM.
I try to use Odin to flash stock firmware and revert to unrooted, but I get the following error: (I am able to get phone into download Odin mode)
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Using Odin 3.09 and trying to flash :
ALL_I545VRUEMK2_I545VZWEMK2_1937946_REV06_user_low_ship_MULTI_CERT.tar
Not sure if I'm using the wrong stock firmware and Odin version.
Let me know what I'm doing wrong thank you!
You can't flash older firmwares.
Odin 3.09 worked fine for me in the past, buy it doesn't hurt to try a different version.
Also, use the back USB ports if you have a pc.
Try different USB cables and windows versions too. Odin is quite picky.
My setup was Windows 7 x64 Pro with Odin 3.09. Using the back USB and original cable I never had an issue flashing stuff with Odin.
GDReaper said:
You can't flash older firmwares.
Odin 3.09 worked fine for me in the past, buy it doesn't hurt to try a different version.
Also, use the back USB ports if you have a pc.
Try different USB cables and windows versions too. Odin is quite picky.
My setup was Windows 7 x64 Pro with Odin 3.09. Using the back USB and original cable I never had an issue flashing stuff with Odin.
Click to expand...
Click to collapse
So I should be flashing the latest lollipop firmware vs. the older kit kat or jellybean?
odin is failing when flashing aboot.mbn because the rom has a bootloader that is older than the bootloader on the phone.
Flashing a stock LP or kk should work if the phone was running a stock 4.3 rom.
audit13 said:
odin is failing when flashing aboot.mbn because the rom has a bootloader that is older than the bootloader on the phone.
Flashing a stock LP or kk should work if the phone was running a stock 4.3 rom.
Click to expand...
Click to collapse
Alright I tried what you said and started to flash the following file: I545VRUGOC1_I545VZWGOC1_VZW
Here is the data from Odin 3.09 and the process failed again:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any suggestions? Working with Windows 10 and original samsung cord.
Strange. Boot into recovery and look at the second or third line for the recovery version on the phone.
audit13 said:
Strange. Boot into recovery and look at the second or third line for the recovery version on the phone.
Click to expand...
Click to collapse
So booting into download gives the following:
Odin Mode
Product name: SCH-I545
Current Binary: Samsung Official
System Status: Custom
Reactivation Lock: Off
CSB-CONFIG-LSB: 0x30
Secure Download: Enabled
Write Protection: Enabled
eMMC Burst Mode enabled
Can the phone be booted into recovery?
audit13 said:
Can the phone be booted into recovery?
Click to expand...
Click to collapse
Trying... Maybe not anymore???... Giving me the software update fail screen
Sounds reasonable since recovery is probably gone.
This is the verizon version of the phone? Have you tried using the original USB cable as previously suggested, a different USB port, or operating system?
audit13 said:
Sounds reasonable since recovery is probably gone.
This is the verizon version of the phone? Have you tried using the original USB cable as previously suggested, a different USB port, or operating system?
Click to expand...
Click to collapse
Just got his while trying this OS on a different USB port.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
angelfury126 said:
Just got his while trying this OS on a different USB port.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Just got it to PASS!!!! YES!!!. Plugged into the back usb ports.
Now the problem is it won't boot up... Thoughts?
It is completely dead? Did you get the firmware from sammobile.com?
audit13 said:
It is completely dead? Did you get the firmware from sammobile.com?
Click to expand...
Click to collapse
Don't think so. I'll download and try again.
All official firmware is on sammobile.com.
The phone will go to download mode?
audit13 said:
All official firmware is on sammobile.com.
The phone will go to download mode?
Click to expand...
Click to collapse
Yes.
angelfury126 said:
Just got it to PASS!!!! YES!!!. Plugged into the back usb ports.
Now the problem is it won't boot up... Thoughts?
Click to expand...
Click to collapse
I told you right from the beginning to use the back USB ports.
Anyway, did you wipe before flashing the firmware? Cuz Odin will not do it for you.
have you tried flashing different versions of the rom?
When flashing, did you try unchecking everything except f.reset time? When it finishes flashing, power off the phone by removing the USB cable and then the battery. Replace the battery and boot directly to recovery to perform a factory wipe, then reboot to the rom.
audit13 said:
power off the phone by removing the USB cable and then the battery.
Click to expand...
Click to collapse
Or you can just hold the power button for a couple of seconds until it turns off
That will work too but I find removing the battery to be easier for me.