I am trying to update to kitkat and keep failing in odin near the end of the process - see messages below. Has anyone else seen this and how can I overcome the problem?
Thanks
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pjh2903 said:
I am trying to update to kitkat and keep failing in odin near the end of the process - see messages below. Has anyone else seen this and how can I overcome the problem?
Thanks
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Flash XEO Poland version & report.
Thanks
Loaded Poland version and everything worked OK, Just wonder why the German DTM version would not work.
pjh2903 said:
Loaded Poland version and everything worked OK, Just wonder why the German DTM version would not work.
Click to expand...
Click to collapse
File size differences between branded & Unbranded firmwares.
pjh2903 said:
Loaded Poland version and everything worked OK, Just wonder why the German DTM version would not work.
Click to expand...
Click to collapse
LINK changed N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME - just flash via Odin over the Polish one
KNOX stays 0/0
THANK YOU!!!!
jdomadia said:
File size differences between branded & Unbranded firmwares.
Click to expand...
Click to collapse
Dude you really ****ing saved me ))))))) u have no IDE how greatfule i am to you.. I have been looking around the net for several 6-8 hour I thought I had bricked the phone)))
Now ATLAST it is up and running thank you so very much
Schutzi said:
Dude you really ****ing saved me ))))))) u have no IDE how greatfule i am to you.. I have been looking around the net for several 6-8 hour I thought I had bricked the phone)))
Now ATLAST it is up and running thank you so very much
Click to expand...
Click to collapse
Happy I am able to help u.Cheers
Same..
Hi guys, thanks for this post.
Had the same problem and right now downloading Polish XEO N9005XXUENA6 version. Is it right version to overwright this German, or should use some another? Thank you..
Related
Hi
I'm kinda stuck on unrooting my Note 3 (SM-N9005)
I've tried to unroot about 10 times in the same amount of usb ports (about)
I always get the same problem
"
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005VFGENA4_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
I'm freaking out a little bit, cause my phone is not working anymore.
Can anyone please help me with my problem?
Thanks
flash a stock firmware from samsung and then root using kingo. google for how to root with kingo
theoutliner said:
Hi
I'm kinda stuck on unrooting my Note 3 (SM-N9005)
I've tried to unroot about 10 times in the same amount of usb ports (about)
I always get the same problem
"
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005VFGENA4_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
I'm freaking out a little bit, cause my phone is not working anymore.
Can anyone please help me with my problem?
Thanks
Click to expand...
Click to collapse
I think tat one related tp the partition. U need a pit file.
U can't just get other firmware and flash? All firmware like that?
Sent from N7105, powered by DittoNote3 v.3.2 with AGNi PSN purestock v3.9.3 OC
Sold my phone on eBay, I had it rooting running SafeStrap on NB1 firmware. Thought it would be best to flash back to stock before shipping it. Used this ROM. Got various errors before deciding I had to repartition with this PIT file. Since then I have gotten the same error (in the title). Is this fixable or am I completely screwed?
Odin text:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Click to expand...
Click to collapse
Update: Just tried a USB port on the motherboard rather than the front panel ports and got this:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Click to expand...
Click to collapse
Is this good or am I even more screwed?
Update 2: Here's what I get when only flashing the MD5 without the PIT:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Click to expand...
Click to collapse
Update 3: Was able to flash the MD5 I used in order to root. Tried again to flash the stock MD5 and got about as far as one can hope for but, again, faced the Complete(Write) operation failed.
Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> NON-HLOS.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Click to expand...
Click to collapse
After this point I was again able to restore the ROM I had before. So I'm guessing this points to the problem being within the MD5 I'm attempting to flash?
If you're not already, use the tar from here
http://forum.xda-developers.com/showthread.php?p=50912149
It could be a bad download of the file that is causing the problem. You also should not need the pit file. Use usb 2.0 ports, not 3.0 and try different ports and cable. Odin can be finicky.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you're not already, use the tar from here
http://forum.xda-developers.com/showthread.php?p=50912149
It could be a bad download of the file that is causing the problem. You also should not need the pit file. Use usb 2.0 ports, not 3.0 and try different ports and cable. Odin can be finicky.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I redownloaded the file from that link, used a different USB port, and finally I am successful!
windoge said:
Thanks, I redownloaded the file from that link, used a different USB port, and finally I am successful!
Click to expand...
Click to collapse
Glad you got it working!
Sent from my Nexus 5 using XDA Free mobile app
I tired changing USB ports it worked...
jd1639 said:
If you're not already, use the tar from here
http://forum.xda-developers.com/showthread.php?p=50912149
It could be a bad download of the file that is causing the problem. You also should not need the pit file. Use usb 2.0 ports, not 3.0 and try different ports and cable. Odin can be finicky.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thank a lot...
It worked after trying different ports...
i was trying to update galaxy s5 to lollipop and i have this problem
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BNL9_G900FEUR1BNL2_G900FXXU1BNL9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> NON-HLOS.bin
<ID:0/006> rpm.mbn
<ID:0/006> sbl1.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
anyone can help ?
Hello
I recently upgraded my samsung galaxy S5 (G900F) to android 5. I downloaded the firmware from sammobile a few weeks ago and it's been working great. Since I live in South Africa, the updates take quite a while to reach us, and finally they're here. I downloaded the original 4.4.2 firmware so that I can upgrade my firmware from the phone itself (Thinking it would be best that way). The version I'm trying to install is this-
"G900FXXU1ANG2_G900FOXE1ANI2_G900FXXU1ANG2_HOME.ta r.md5"
That's the name of the md5 file I'm using. When I click "Start" in Odin, it takes a few minutes to do a few things and then all of a sudden:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANG2_G900FOXE1ANI2_G900FXXU1ANG2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen it says:
ODIN: Invalid ext4 image
Please help!!
I successfully downgraded back to 4.4.2.
Ensure that you are not using an USB HUB nor other cable than original...
S5 tends to be a little stuborn on that LOL
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3860 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im tryin to flash G928FXXU5CRI1_G928FTMZ4CRF1_G928FXXU5CRH3_HOME.tar.md5
Im new so I need every help.
Shootarz said:
Im tryin to flash G928FXXU5CRI1_G928FTMZ4CRF1_G928FXXU5CRH3_HOME.tar.md5
Im new so I need every help.
Click to expand...
Click to collapse
The stock image you flash should match your device. And he nougat or at least mm. If you got a Verizon phone you want Verizon stock for example. Sammobile will be your friend in this. Also. Did you install Samsung USB drivers to PC?
try this https://www.youtube.com/watch?v=Tm4LiABFKYo
---------- Post added at 01:18 AM ---------- Previous post was at 01:16 AM ----------
Shootarz said:
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3860 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
try this tutorial I happened the same and so solve it https://www.youtube.com/watch?v=1aNP0ImacUk