Database Users

[Q] Problem unrooting Samsung galaxy note 3 SM-N9005

Hi
I'm kinda stuck on unrooting my Note 3 (SM-N9005)
I've tried to unroot about 10 times in the same amount of usb ports (about)
I always get the same problem
"
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005VFGENA4_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
I'm freaking out a little bit, cause my phone is not working anymore.
Can anyone please help me with my problem?
Thanks

flash a stock firmware from samsung and then root using kingo. google for how to root with kingo

theoutliner said:
Hi
I'm kinda stuck on unrooting my Note 3 (SM-N9005)
I've tried to unroot about 10 times in the same amount of usb ports (about)
I always get the same problem
"
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005VFGENA4_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
I'm freaking out a little bit, cause my phone is not working anymore.
Can anyone please help me with my problem?
Thanks
Click to expand...
Click to collapse
I think tat one related tp the partition. U need a pit file.
U can't just get other firmware and flash? All firmware like that?
Sent from N7105, powered by DittoNote3 v.3.2 with AGNi PSN purestock v3.9.3 OC

[Q] G900f Odin ext4 Fail when downgrading to 4.4.2 from 5

Hello
I recently upgraded my samsung galaxy S5 (G900F) to android 5. I downloaded the firmware from sammobile a few weeks ago and it's been working great. Since I live in South Africa, the updates take quite a while to reach us, and finally they're here. I downloaded the original 4.4.2 firmware so that I can upgrade my firmware from the phone itself (Thinking it would be best that way). The version I'm trying to install is this-
"G900FXXU1ANG2_G900FOXE1ANI2_G900FXXU1ANG2_HOME.ta r.md5"
That's the name of the md5 file I'm using. When I click "Start" in Odin, it takes a few minutes to do a few things and then all of a sudden:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANG2_G900FOXE1ANI2_G900FXXU1ANG2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen it says:
ODIN: Invalid ext4 image
Please help!!

I successfully downgraded back to 4.4.2.
Ensure that you are not using an USB HUB nor other cable than original...
S5 tends to be a little stuborn on that LOL

[HELP]I Think i bricked my phone. Please help me Out Thanks, [Solved :D]

Hi,
I mistakenly deleted my os and now i can't boot. When i flash it just get stuck. Recover-mode downloading blue bar just move a further and than stop. When i try to run my mobile there is a error message "Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again." I can only open Recovery Mode,
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> hyp.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me with this.
Edit: Change the port and it works

Unable to Root N910G after update to Android 6.0.1 firmware

My phone was rooted before I downloaded and flashed the marshmallow firmware (28th Aug 2017 version). Now I am trying to root it, it just says FAIL.
I have tried both, the CF-Autoroot and the TWRP methods. No luck. Any help??
Below are the logs from Odin.
CF-Autoroot:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> cache.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
TWRP:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Help with flashing fw to g928f

<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3860 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Im tryin to flash G928FXXU5CRI1_G928FTMZ4CRF1_G928FXXU5CRH3_HOME.tar.md5
Im new so I need every help.

Shootarz said:
Im tryin to flash G928FXXU5CRI1_G928FTMZ4CRF1_G928FXXU5CRH3_HOME.tar.md5
Im new so I need every help.
Click to expand...
Click to collapse
The stock image you flash should match your device. And he nougat or at least mm. If you got a Verizon phone you want Verizon stock for example. Sammobile will be your friend in this. Also. Did you install Samsung USB drivers to PC?

try this https://www.youtube.com/watch?v=Tm4LiABFKYo
---------- Post added at 01:18 AM ---------- Previous post was at 01:16 AM ----------
Shootarz said:
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3860 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
try this tutorial I happened the same and so solve it https://www.youtube.com/watch?v=1aNP0ImacUk