Is this process of rooting safe if I do it correctly or there is also chance of bricking ?Idon't want to lose warranty so please give me some tips. If i root my device can i use my sd card as my default installation of apps or I need to install custom rom? If i root my device is it in stock rom? SOrry for my many questions. newbie on android from ios.
Instruction:
1- Download CF-ROOT for device SM-G7102 from THIS LINK
2- Extract the downloaded files in ur PC and connect ur fone in download mode (volume - , Home button , Power button press simultaneously for some seconds)
3- Open ODIN and place CF-Auto-Root-ms013g-ms013gxx-smg7102.tar.md5 in PDA or AP section of ODIN
4 - Press start button on ODIN and wait till it shows RESET or PASS and fone Reboot automatically
5 - Enjoy ur Root on Grand 2
Related
hi , i have got galaxy s4 i9505 , i rooted the phone with this
TUTORIAL
( Step 1: Download both CF-Auto-Root Android 4.4.2 Package and ODIN3, and extract the files to the computer.
Step 2: Power off the handset and put it in Download mode by pressing and holding down the Volume Down, Home and Power buttons together. After a warning screen appears, press the Volume Up button to enter Download mode.
Step 3: Run Odin3 v3.09.exe as an Administrator while the phone is Download mode, and connect the Galaxy S4 to the PC via USB cable. If connected successfully, a message showing “Added!!” will appear in Odin’s message box.
Step 4: Now, click on the AP button, and select the CF-Auto-Root file that was extracted in Step 1.
Step 5: In Odin, check the “Auto Reboot” and “F. Reset Time” options.
Step 6: Click on the Start button in Odin to begin the flashing process.
Step 7: Once the process is complete, the Galaxy S4 will restart and a PASS message with green background will appear in the left-most box at the top of Odin.
You can now unplug the USB cable to disconnect the handset from the PC.
AFTER THAT
i downloaded 3 different roms and try to installed ( in recovery mode , so volume up + menu + power button ) and wipe data cache and then i chose one of the roms and it starts and after few seconds it says ""failed to verify whole file signature , signature verification failder ""
so how to fix this problem ?
can you give me TUTORIAL for the whole proces ?
THANKS
If your phone do not start so first you need to reflash again with stock rom and again root your mobile after that install cwm or other recovery. Due to cwm or other u can install your roms...
Sent from my GT-I9500 using XDA Premium 4 mobile app
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
No one answered me
my mobile still dying :crying:
I think u have to press volume - instead of volume +..
if still it don't open.
Try to flash a new rom from download mode..
Your rom get corrupted you been to flash a New rom trought odin and download Mode in the device
Fixing
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
*Enjoy
check url
louis0 said:
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
Click to expand...
Click to collapse
AmGaD-SaLaH said:
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
please check URL website
Click to expand...
Click to collapse
kindly give again the website of the firmware.. thankyou
Look at my grand prime original developers where I show to flash and from where to downloads firmware
You'd better download a firmware backup of your Handheld and install Odin in your PC in case there's something wrong happens in your device.
Sent from my SM-G530H using XDA Free mobile app
i have hold the power botton and home botton but it only boot to factory mode please help me
nelvicv3 said:
i have hold the power botton and home botton but it only boot to factory mode please help me
Click to expand...
Click to collapse
Home, Volume Down and Power buttons.
Abd El -Rahman Alswaf said:
AmGaD-SaLaH said:
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
please check URL website
Click to expand...
Click to collapse
Go here http://www.sammobile.com/firmwares/
Make account and search your model number ie; sm-g531h
Click to expand...
Click to collapse
grand prime 4g
nelvicv3 said:
i have hold the power botton and home botton but it only boot to factory mode please help me[/QUO
check once by changing touch display...or remove touch connector from display and try on.....
Click to expand...
Click to collapse
EXACTLY!!!!!
louis0 said:
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
Click to expand...
Click to collapse
Yes bro i am facing same problem i cant reach my bootloader option. plz help us guyz
Devansh11 said:
Yes bro i am facing same problem i cant reach my bootloader option. plz help us guyz
Click to expand...
Click to collapse
Try to enter download mode. HOME+VOLUME DOWN + POWER
Also when entering either recovery or download mode I find it helps to hold HOME+VOLUME UP and then press POWER.
If you can enter download mode but not recovery maybe your recovery is corrupt, reflash your firmware using ODIN
Well that literally happened to me and I fixed it by installing a custom recovery but its cuz of installing a wrong root version for android. U can flash a custom recovery and tell us.
ty bro
u0aol said:
Home, Volume Down and Power buttons.
Click to expand...
Click to collapse
CAN u plz tell how to reinstall flash
Devansh11 said:
CAN u plz tell how to reinstall flash
Click to expand...
Click to collapse
www.sammobile.com/tag/galaxy-grand-prime - Download the correct firmware for your device.
Ensure all of the Samsung USB drivers have been installed on your computer.
Place your phone into download mode (Home+Volume Down+ Power)
Open ODIN on your computer (Version 3.10 works best for the Grand Prime, but the newest version would be optimal)
Plug your USB cable into your cellphone and into your computer.
ODIN will say *ADDED* in its text output.
Press AP or PDA (Depending on ODIN version)
Select your downloaded firmware packet (It is either a .md5 file or a .md5.tar)
Press start and ODIN will automatically flash your firmware for you.
ODIN will say *SUCCESS* if completed and will automatically restart your phone.
Wait until your phone boots.
That is how you flash firmware using ODIN. I hope it helps.
Please in future search these forums as there are a hundred different tutorials on flashing.
:good::good:
---------- Post added at 04:46 AM ---------- Previous post was at 04:36 AM ----------
Honex98 said:
Well that literally happened to me and I fixed it by installing a custom recovery but its cuz of installing a wrong root version for android. U can flash a custom recovery and tell us.
Click to expand...
Click to collapse
Corrupting your recovery is NOT an issue that would happen because of a bad flash of root files.
Flashing a custom recovery such as TWRP will NOT solve issues with root or any issues caused by flashing the wrong root file.
Firmware corruption caused by flashing an incorrect root file is only fixable by reflashing your firmware and starting from the begining, custom recovery has nothing to do with that.
TWRP makes it easier to fix the issue, but it is not itself a fix for the issue.
hi i am using grand prime galaxy . but i got some text with blue and red it shows muticore odin mode etc
i am not able to enter recovery mode of smG530h
i can enter recovery mode of my smg 530h dous it just reboot and also dont show anything after rebooting black screen appears it is going in download mode pls help me :crying::crying::crying::crying:
I leave the download link contains TWRP and rooting SuperSU for 915G 6.0 / 6.0.1
It cost me quite get compatible files . But after all this we can rootearlo smoothly.
INSTALL TWRP
1- Open Odin
2- Select "AP" and open the archive"twrp_3.0-915F-915FY-915G-915V"
3- TURN OFF YOUR NOTE EDGE.
4- POWER ON PRESS "VOL DOWN + POWER + HOME", in the first menu press "VOL. UP" and connect via USB
5- SELECT "START" in the ODIN.
EXECUTE SUPERSU
then tell the program "pass" in the last step , we just need move the file "BETA-SuperSU-v2.71-20160331103524" to the internal phone memory.
Now... POWER OFF the note edge... and POWER ON PRESS "VOL UP+ POWER + HOME".
In the new menu touch in "INSTALL" and select the SUPER SU ARCHIVE.
just need scroll the inferior bar.
WE ARE ROOT.
FILES: mega.nz/#!flEy1AbB!xEHo5lLZ6RpIW9DJiqA7YXZNOZN3Dwx4cXPAaI9oS9w
NOTE: I just try in this version SM N915G MARSHMALLOW 6.0.1
Download Link
You haven't provided download link
ChandravadanR said:
You haven't provided download link
Click to expand...
Click to collapse
I only seek help new people on this issue.
It is a small guide, is not spam , is not advertising or anything malicious.
It would have liked to say thank people who was useful this material and not be checking whether one can or can not put a link , as I said before , it's nothing bad.
https://mega.nz/#!flEy1AbB!xEHo5lLZ6RpIW9DJiqA7YXZNOZN3Dwx4cXPAaI9 oS9w
Enter decryption key
To access this folder/file, you will need its Decryption key.
If you do not have the key, contact the creator of the link.
when i try dont tellme that, is a direct link up by me.
Can you unroot to get OTA updates, then root again?
odin shows PASS but when i reboot agaib to install SUPERSU , it again starts android recovery... what should i do know??:
oren_b said:
Can you unroot to get OTA updates, then root again?
Click to expand...
Click to collapse
Yes you can.
faridfox said:
Yes you can.
Click to expand...
Click to collapse
Will I loose TWRP if I do upgrade via OTA?
RobbieJeiter said:
I leave the download link contains TWRP and rooting SuperSU for 915G 6.0 / 6.0.1
It cost me quite get compatible files . But after all this we can rootearlo smoothly.
INSTALL TWRP
1- Open Odin
2- Select "AP" and open the archive"twrp_3.0-915F-915FY-915G-915V"
3- TURN OFF YOUR NOTE EDGE.
4- POWER ON PRESS "VOL DOWN + POWER + HOME", in the first menu press "VOL. UP" and connect via USB
5- SELECT "START" in the ODIN.
EXECUTE SUPERSU
then tell the program "pass" in the last step , we just need move the file "BETA-SuperSU-v2.71-20160331103524" to the internal phone memory.
Now... POWER OFF the note edge... and POWER ON PRESS "VOL UP+ POWER + HOME".
In the new menu touch in "INSTALL" and select the SUPER SU ARCHIVE.
just need scroll the inferior bar.
WE ARE ROOT.
FILES: mega.nz/#!flEy1AbB!xEHo5lLZ6RpIW9DJiqA7YXZNOZN3Dwx4cXPAaI9oS9w
NOTE: I just try in this version SM N915G MARSHMALLOW 6.0.1
Click to expand...
Click to collapse
Hi,
1- what is the dic code for the link ?
2-There is a newer version of twrp , TWRP-3.1.0-for_915F_915FY_915G.zip , is that ok to use this one? why you used the "twrp_3.0-915F-915FY-915G-915V" ?
thanks
no reply ??
so much for a dead thread
Before this issue happens i try to root my phone using King Root that i download from kingrootapk.com. After i run that apps my phone died. I try to switch on so many time but didnt work. I download stock ROM from firmwarefile.com for my phone version and run the Odin v 1.85.,.it detect my phone but failed to flash that stock ROM ...Please someone help me.
HELLO... your grand2 is softbricked
i can help you!!!
do this:
A.YOU NEED:
1. a windows os
2.your phone
3. download this stock prerooted https://www.androidfilehost.com/?fid=23329332407574426?fid=23329332407574426
4. download odin 3.09 http://www.devfiles.co/download/CAHmXM6c/Odin_v3.09.zip
5. YOU(lol)
B.1.switch your phone download mode ( power+volume down+home)
2. extract odin and stock prerooted
3. open odin 3.09 select pda or ap and select the extracted stock prerooted (NOT the .zip)
4.connect your phone and you will see in odin on upper right corner @[0:] or something like it means your phone connected
5.now press start and wait
6.let the phone boot alone(if it bootloop open recovery and wipe)
7.CONGRATULATIONS
8. you can open settings and see you baseband version and download the official stock
dont forget to press THANKS
bismillah ar rahman ar rahim
Hello Guys today i will show you how you can Flash ur device with TWRP and Root it without waiting 7 Days and get locked out of ur device.
The first thing i have to say is, sorry for my broke english, i am from Germany.
I will teach you step by step how u can done this without Problems.
Please confirm that OEM-LOCK is enabled
The first thing i do is flashing the newest 4 file Rom for the G955F the name of the ROM is G955FXXU4DSCB its a DBT ROM you can Download it via Samfirm. And please choose the CSC_OXM as CSC in Odin because i had problems with the HOME_CSC after i flash Back from Rooted Phone to Stock Rom why ever.
Complete the Setup and ensure that u have Signal on your Network, it dont work for me without Signal. after that change our date seven days later and go to Build Number tap it 5 times and go to dev settings confirm that OEM-LOCK is activated reboot your Phone and go to Download Mode by holding Vol Down + Bixby + Power Untick on ODIN 3.13 Auto Reboot after that Flash the newest TWRP after Flash is done Press Vol- Down + Bixby + Power Down when Screen goes of press immediately Vol Up + Bixby + Power and go to the Recovery and swipe to Allow Modifications Format Data by Pressing on Wipe and then Format Data confirm with yes Flash RMM-STATE BYPASS and no-verity-opt and Magisk Download RMM-STATE BYPASS AND NO-VERITY here u can Download Magisk and the APK for Magisk you are almost done. Now reboot your Phone and wait... After booting up in setting wizard make sure to uncheck diagnostic data after that complete the Setup please do not add Google Account or somethng like this until you complete the complete Progress. Wait and check your Signal if u have Signal change your date 7 Days later and go to Build Number tap it 5 times and go to Dev Settings and check if OEM LOCK is available now and activated you can now install the Magisk APK to feel the Power of Root
Donation
Thanks gonna to corsicanu, topjohnwu,George Burduli , zxz0O0
reserved for video