Related
Please help.
I tried to root my phone using the app kingo root,
After the root process showed as successful my phone proceeded to reboot only it is stuck on the boot screen and dosnt move on any further.
By holding the up volome key, the home key and the power key i get up the following screen.
Android System Recovery <3e>
LRX2IT.G900FXXU1POG7
Reboot System now
Apply update from ADB
Apply update from external storage
Apply update from cache
Wipe data/factory reset
Wipe cache partition
Reboot to bootloader
power down
view recovery logs
Enable cp logging
Disable cp logging
I have no idea what to do or how to fix this as i am a complete novice when it comes to Android,
Can someone please help me??
Go to sammobile .com firmware section
Enter your model S5
Select your region from the dropdown
Download a stock ROM (Free account needed)
Flash with ODIN
Instructions and links to ODIN under the download
Next time, come to XDA to learn how to root, instead of afterwards when you've already bricked it
Thanks for your quick reply and in the process of downloading firmware now and have just installed odin,
Yep your right mate i should have done bit more research before jumping into rooting it
For rooting
http://forum.xda-developers.com/showthread.php?t=2696537
3rd post has the links
The one linked for the G900F works for Lollipop (Same one I use each new ROM update)
hey guys, i just tryed to install a rooted kernel on my s6 edge s6+ (g928f) and now it just says "kernel is not seandroid secure" what to do? i have tryed different kernels... and it wont start at all do you guys have an idea of what to to? its all stock firmware, no CWM or anything installed
you make a nandroid backup bevor?
Same problem
Verstuurd van mijn SM-G928F met xda-developers.com, mogelijk gemaakt door appyet.com
Same problem x2
In a other post some one tell me how to fix it , and it works for mee my sm g928f is rooted later today i will post it in this threat
Originally Posted by agantal864
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0...eltezt.img.tar
supersu: https://download.chainfire.eu/924/Su...0228150503.zip
USB drivers link: http://developer.samsung.com/technic...o?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-r...-s6-edge-plus/
THIS one works for me
I bought the phone from out of my country and I'd like to flash my country's firmware (without triggering KNOX) for getting better signal, proper connection info (Lte+ , 4.5G)
I flashed the firmware via Odin (putting BL, AP, CP and CSC in their area) and nothing has changed in the phone (CSC etc.). Is there something should be done before flashing stock firmware via Odin?
Havik1453 said:
I bought the phone from out of my country and I'd like to flash my country's firmware (without triggering KNOX) for getting better signal, proper connection info (Lte+ , 4.5G)
I flashed the firmware via Odin (putting BL, AP, CP and CSC in their area) and nothing has changed in the phone (CSC etc.). Is there something should be done before flashing stock firmware via Odin?
Click to expand...
Click to collapse
Before you flash through odin make sure you wipe data and cache through stock recovery on the s7 edge, then flash your countrys stock firmware when its done dont let your phone complete the first boot. Make sure you wipe data and cache through the recovery after this let it boot up. It now should be on your countrys csc.
amar95353 said:
Before you flash through odin make sure you wipe data and cache through stock recovery on the s7 edge, then flash your countrys stock firmware when its done dont let your phone complete the first boot. Make sure you wipe data and cache through the recovery after this let it boot up. It now should be on your countrys csc.
Click to expand...
Click to collapse
So I need to go into stock recovery by pressing volume up + home button + power button and select wipe cache partition, power down the device, volume down + home button + power button into download mode, flash stock firmware. After flashing the firmware it automaticly restarts and boots up. How can I wipe cache before it boots up?
Havik1453 said:
So I need to go into stock recovery by pressing volume up + home button + power button and select wipe cache partition, power down the device, volume down + home button + power button into download mode, flash stock firmware. After flashing the firmware it automaticly restarts and boots up. How can I wipe cache before it boots up?
Click to expand...
Click to collapse
You need to wipe cache and wipe data factory reset before and after the stock firmware flash. Also when it says pass on odin or it disconnects have your phone ready in your hand so when the screen goes black hold the recovery button combination and let go when you see the samsung logo. If the phone stars turning on just hold power + volume up + home button, when the phone shuts off let go of the buttons and very quickly hold them again and let go when the samsung logo appears.
amar95353 said:
You need to wipe cache and wipe data factory reset before and after the stock firmware flash. Also when it says pass on odin or it disconnects have your phone ready in your hand so when the screen goes black hold the recovery button combination and let go when you see the samsung logo. If the phone stars turning on just hold power + volume up + home button, when the phone shuts off let go of the buttons and very quickly hold them again and let go when the samsung logo appears.
Click to expand...
Click to collapse
It's easier to just untick "Auto reboot" on Odin ....device will not start after Odin do its job.... [emoji4]
Sent from my SM-G935F
Xode said:
It's easier to just untick "Auto reboot" on Odin ....device will not start after Odin do its job.... [emoji4]
Sent from my SM-G935F
Click to expand...
Click to collapse
Didn't know about that. Good to know
amar95353 said:
Before you flash through odin make sure you wipe data and cache through stock recovery on the s7 edge, then flash your countrys stock firmware when its done dont let your phone complete the first boot. Make sure you wipe data and cache through the recovery after this let it boot up. It now should be on your countrys csc.
Click to expand...
Click to collapse
I don't want to sound contradictory, but I have flashed quite a few different firmwares on my S7 Edge and I never had to go through the steps you suggested to get a successful flash.
Here are the steps I have done:
1) Make sure phone has OEM unlocked in Developer Settings
2) Select USB Debugging in Developer Settings
3) Download firmware that I want to us - Unzip and place AP, BL, CP and CSW in the correct slots in Odin.
4) Flash via Odin
5) Reboot
Also make sure you are using the latest Odin - "Odin-3.12.3"
I don't know if enabling USB Debugging is necessary but I have always included that step - I beleive making sure OEM unlock is selected is necessary. (do this in developer settings - to activate developer settings go to About Phone, Software Info, click on Build Number a bunch of times until you see "developer settings has been enabled".
I have updated firmware at least 7 times since I purchased the S7 EDge, maybe more, following those same steps every time and never had an issue. Not once.
That was my experience - as anything when flashing roms, YMMV.
Good Luck
mocsab said:
I don't want to sound contradictory, but I have flashed quite a few different firmwares on my S7 Edge and I never had to go through the steps you suggested to get a successful flash.
Here are the steps I have done:
1) Make sure phone has OEM unlocked in Developer Settings
2) Select USB Debugging in Developer Settings
3) Download firmware that I want to us - Unzip and place AP, BL, CP and CSW in the correct slots in Odin.
4) Flash via Odin
5) Reboot
Also make sure you are using the latest Odin - "Odin-3.12.3"
I don't know if enabling USB Debugging is necessary but I have always included that step - I beleive making sure OEM unlock is selected is necessary. (do this in developer settings - to activate developer settings go to About Phone, Software Info, click on Build Number a bunch of times until you see "developer settings has been enabled".
I have updated firmware at least 7 times since I purchased the S7 EDge, maybe more, following those same steps every time and never had an issue. Not once.
That was my experience - as anything when flashing roms, YMMV.
Good Luck
Click to expand...
Click to collapse
OEM unlock and usb debugging is unnecessary when flashing stock firmware.
You need OEM unlock only when you flash something custom (TWRP, custom rom, root, etc) or else phone won't boot.
Sent from my SM-G935F using Tapatalk
mocsab said:
I don't want to sound contradictory, but I have flashed quite a few different firmwares on my S7 Edge and I never had to go through the steps you suggested to get a successful flash.
Here are the steps I have done:
1) Make sure phone has OEM unlocked in Developer Settings
2) Select USB Debugging in Developer Settings
3) Download firmware that I want to us - Unzip and place AP, BL, CP and CSW in the correct slots in Odin.
4) Flash via Odin
5) Reboot
Also make sure you are using the latest Odin - "Odin-3.12.3"
I don't know if enabling USB Debugging is necessary but I have always included that step - I beleive making sure OEM unlock is selected is necessary. (do this in developer settings - to activate developer settings go to About Phone, Software Info, click on Build Number a bunch of times until you see "developer settings has been enabled".
I have updated firmware at least 7 times since I purchased the S7 EDge, maybe more, following those same steps every time and never had an issue. Not once.
That was my experience - as anything when flashing roms, YMMV.
Good Luck
Click to expand...
Click to collapse
You don't need to do what I am saying for a successful flash. You only need to do this when you want to change your csc without root
NonXtreme said:
OEM unlock and usb debugging is unnecessary when flashing stock firmware.
You need OEM unlock only when you flash something custom (TWRP, custom rom, root, etc) or else phone won't boot.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
thanks - I always did have those done but glad to here it isn't necessary. thanks
---------- Post added at 06:13 AM ---------- Previous post was at 06:07 AM ----------
amar95353 said:
You don't need to do what I am saying for a successful flash. You only need to do this when you want to change your csc without root
Click to expand...
Click to collapse
Sorry if I misunderstood -
Check this thread : http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065. It should answer all your questions.
hi all,
first sorry for my bad english.
andorid version 6.0.1, rooted.
i have two problems
first, phone is single sim, but in settings shows "manage sim cards" phone is no g935FD, phone is g935F, but phone works ok.
second, when i update with odin, firmware form sammobile, i can't connect on network, my sim card can't work.
i backup all with flashfire, and when i restore all expect EFS and modem firmware, phone still does't work, and with efs work.
my phone is gift from cousin, and that in settings show only one sim and phone is rooted too.
After that I tried, and I told you what happened.
please help me how to update to 7.0, and how to solve problem with sim.
i tried to update with odin, but when i restore efs and modem, phone, can't connect on network.
UP !
Up !!
Anyone ?
Upppppp
Antonije123 said:
hi all,
first sorry for my bad english.
andorid version 6.0.1, rooted.
i have two problems
first, phone is single sim, but in settings shows "manage sim cards" phone is no g935FD, phone is g935F, but phone works ok.
second, when i update with odin, firmware form sammobile, i can't connect on network, my sim card can't work.
i backup all with flashfire, and when i restore all expect EFS and modem firmware, phone still does't work, and with efs work.
my phone is gift from cousin, and that in settings show only one sim and phone is rooted too.
After that I tried, and I told you what happened.
please help me how to update to 7.0, and how to solve problem with sim.
i tried to update with odin, but when i restore efs and modem, phone, can't connect on network.
Click to expand...
Click to collapse
Can you please provide your device exact model number? It is printed below on the back panel of your phone..Then can suggest you exact stock firmware to flash using odin
DroidHackeR said:
Can you please provide your device exact model number? It is printed below on the back panel of your phone..Then can suggest you exact stock firmware to flash using odin
Click to expand...
Click to collapse
Model is g935f.
I tried superstock room, but again problem with network connect
Antonije123 said:
Model is g935f.
I tried superstock room, but again problem with network connect
Click to expand...
Click to collapse
What do you mean by superstock room? You need to flash latest nought 7.0 stock firmware for your device..
1)Go to the link provided below and select country for your device and download latest 7.0 firmware using free member through registration
https://www.sammobile.com/firmwares/database/SM-G935F/
AFTER THAT FOLLOW ODIN FLASHING GUIDE PROVIDED BELOW
1)You can flash stock firmware for you specific device and country using sammobile.com as a free member registration* Remember to download latest stock firmware for your specific model number and country, you can find your model number printed below on back panel of your phone*
2)Go there in firmware section and enter your device model no and country..( Save it to pc and extract it on your pc in particular firmware folder, you will now find tar.md5 file in that folder)..Now download latest versions of odin and Samsung usb drivers for your device( Extract those files as you did with firmware, install latest usb drivers on pc)
3)From your phone's setting>about device>software info>press build version for 7-8 times continuesly to enable developers option
4)You can find developers option below setting>about device..From developers option select oem unlocking and usb debugging enabled
5)Now connect your phone to pc in download mode( Press volume down+home+power button simultaneously, you are now in download mode..press volume up button to continue)
6) Run odin as device administrator on your pc from odin extracted folder, let pc to install device drivers and your device will be highlighted in odin..
7)Add previously extracted tar.md5 file of stock firmware in AP tab of odin, give it some time to be ready..In odin options let auto reset and reboot options checked..*Dont check repatriation option*
8) Now click start button in odin, flashing process have been started..Sit back and relax untill firmware is being flashed..After that your device will be automatically rebooted and you will have latest stock firmware on your device..
*DO IT ON YOUR OWN RISK NOR I NEITHER ANYONE FROM XDA FORUM WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE*
DroidHackeR said:
What do you mean by superstock room? You need to flash latest nought 7.0 stock firmware for your device..
1)Go to the link provided below and select country for your device and download latest 7.0 firmware using free member through registration
https://www.sammobile.com/firmwares/database/SM-G935F/
AFTER THAT FOLLOW ODIN FLASHING GUIDE PROVIDED BELOW
1)You can flash stock firmware for you specific device and country using sammobile.com as a free member registration* Remember to download latest stock firmware for your specific model number and country, you can find your model number printed below on back panel of your phone*
2)Go there in firmware section and enter your device model no and country..( Save it to pc and extract it on your pc in particular firmware folder, you will now find tar.md5 file in that folder)..Now download latest versions of odin and Samsung usb drivers for your device( Extract those files as you did with firmware, install latest usb drivers on pc)
3)From your phone's setting>about device>software info>press build version for 7-8 times continuesly to enable developers option
4)You can find developers option below setting>about device..From developers option select oem unlocking and usb debugging enabled
5)Now connect your phone to pc in download mode( Press volume down+home+power button simultaneously, you are now in download mode..press volume up button to continue)
6) Run odin as device administrator on your pc from odin extracted folder, let pc to install device drivers and your device will be highlighted in odin..
7)Add previously extracted tar.md5 file of stock firmware in AP tab of odin, give it some time to be ready..In odin options let auto reset and reboot options checked..*Dont check repatriation option*
8) Now click start button in odin, flashing process have been started..Sit back and relax untill firmware is being flashed..After that your device will be automatically rebooted and you will have latest stock firmware on your device..
*DO IT ON YOUR OWN RISK NOR I NEITHER ANYONE FROM XDA FORUM WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE*
Click to expand...
Click to collapse
If i only flash ap phone can't run.
Superstock room i downloaded form xda.
Yes i know everything you wrote, but when flash stock firmware my phone on search network show one network, and show that's my phone g935fd.
First time when i update phone, i must send at service, and my phone was been rooted on 6.01 and single sim(g935f) .
I tried to install stock 6.01 via odin from sammobile but don't work
Antonije123 said:
If i only flash ap phone can't run.
Superstock room i downloaded form xda.
Yes i know everything you wrote, but when flash stock firmware my phone on search network show one network, and show that's my phone g935fd.
First time when i update phone, i must send at service, and my phone was been rooted on 6.01 and single sim(g935f) .
I tried to install stock 6.01 via odin from sammobile but don't work
Click to expand...
Click to collapse
You should flash 7.0 latest nougat for your device model no and country instead of 6.0.1 through odin..Try to flash 7.0 stock firmware instead of superstock rom or stock 6.0.1..If you are running your phone well and have root access..Download Samsung phone info app..Grant root access and provide me screen-shot of information shown in that application here..So i can suggest you proper stock firmware to be flashed using odin
DroidHackeR said:
You should flash 7.0 latest nougat for your device model no and country instead of 6.0.1 through odin..Try to flash 7.0 stock firmware instead of superstock rom or stock 6.0.1..If you are running your phone well and have root access..Download Samsung phone info app..Grant root access and provide me screen-shot of information shown in that application here..So i can suggest you proper stock firmware to be flashed using odin
Click to expand...
Click to collapse
Ss
Antonije123 said:
Ss
Click to expand...
Click to collapse
Nougat is still not available for your country..So you have flashed latest stock 6.0.1 firmware using odin? Still you are not getting network signal? After flashing stock firmware don't restore your efs, it will be restored automatically after flashing...Now just again flash the stock 6.0.1 available on sammobile and after flashing when you see Samsung logo, simply press volume down+power button now your screen will turn off..immediately Press volume up+power+home button simultaneously untill you see Samsung galaxy logo, now release keys and you will boot into stock recovery..From there choose wipe data/factory reset option..After reset, reboot your phone..And see if singal back again or not?
DroidHackeR said:
Nougat is still not available for your country..So you have flashed latest stock 6.0.1 firmware using odin? Still you are not getting network signal? After flashing stock firmware don't restore your efs, it will be restored automatically after flashing...Now just again flash the stock 6.0.1 available on sammobile and after flashing when you see Samsung logo, simply press volume down+power button now your screen will turn off..immediately Press volume up+power+home button simultaneously untill you see Samsung galaxy logo, now release keys and you will boot into stock recovery..From there choose wipe data/factory reset option..After reset, reboot your phone..And see if singal back again or not?
Click to expand...
Click to collapse
Can you send me link for what country to download? I download for slovenia 6.01 but still don't work, and i must restore efs,preload and modem firmware.
App i used to backup ans restore flashfire. I don't konw what is preload but is very important to signal.
Antonije123 said:
Can you send me link for what country to download? I download for slovenia 6.01 but still don't work, and i must restore efs,preload and modem firmware.
App i used to backup ans restore flashfire. I don't konw what is preload but is very important to signal.
Click to expand...
Click to collapse
Try this one as your csc in TOP and country is serbia-russia..Flash it using odin and report..By the way before flashing enable OEM UNLOCKING and USB DEBUGGING from developers option..
Link- https://www.sammobile.com/firmwares/download/89389/G935FXXU1BPH6_G935FTOP1BPH1_TOP/
JUST FLASH AS I INSTRUCTED ABOVE IN FIRST POST I.E.HOW TO FLASH STOCK FIRMWARE USING ODIN AND DO FACTORY RESET VIA STOCK RECOVERY AFTER FLASHING AS I SAID IN MY PREVIOUS POST
DroidHackeR said:
Try this one as your csc in TOP and country is serbia-russia..Flash it using odin and report..By the way before flashing enable OEM UNLOCKING and USB DEBUGGING from developers option..
Link- https://www.sammobile.com/firmwares/download/89389/G935FXXU1BPH6_G935FTOP1BPH1_TOP/
JUST FLASH AS I INSTRUCTED ABOVE IN FIRST POST I.E.HOW TO FLASH STOCK FIRMWARE USING ODIN AND DO FACTORY RESET VIA STOCK RECOVERY AFTER FLASHING AS I SAID IN MY PREVIOUS POST
Click to expand...
Click to collapse
Ok, flash only ap or bl, ap, cp,csc ?
Antonije123 said:
Ok, flash only ap or bl, ap, cp,csc ?
Click to expand...
Click to collapse
This is single bundled firmware including ap,cp,bl in it and it is have to flash as AP only..
DroidHackeR said:
This is single bundled firmware including ap,cp,bl in it and it is have to flash as AP only..
Click to expand...
Click to collapse
ok, i will try now, and report here after done
up: after flash i have again two sim, and on search network show me only one network witch is not mine.
Antonije123 said:
ok, i will try now, and report here after done
up: after flash i have again two sim, and on search network show me only one network witch is not mine.
Click to expand...
Click to collapse
Ohhhk now one more tutorial for you and it will help you i guess
1) Download samsung smartswitch application for windows from the link provided below
http://samsungsmartswitch.org/
2) Install latest samsung usb drivers for your s7 edge from below
http://samsungusbdriver.com/download/samsung-driver-v1-5-63-0
3)Now install both samsung smart switch and samsung usb drivers on your windows pc
4) Open samsung smart switch as device administrator on your pc
5) Power off your device and press volume down+home+power button simultaneously untill you get into download mode, now press volume up to continue
6)After installing usb drivers for your phone by pc, your device will be recognised in smart switch
7) Select emergency software recovert option from smart switch
8) It will ask you some information like model no and serial no ( You can find model no and serial no printed below on back panel of phone or on the box of phone)
9) After providing such information, smart switch will locate latest and correct software version to be installed for your device
10) Start update and sit back..It will take some time to update software..After that your device will be reboot and if you are facing bootloop i.e. stuck at samsung logo follow factory reset process i have provided earlier( While your phone stuck at samsung logo for long time, press volume down+power button, screen will turn off now immediatly press volume up+power+home button simultaneously untill you see samsung galaxy s7 edge logo..Now release buttons, you will boot into stock recovery..From there choose wipe data/factory reset option..After reset complete, reboot your device)
*IF SMART SWITCH FAILS TO DETECT YOUR DEVICE, UNINSTALL SAMSUNG USB DRIVER AND INSTALL THEM AGAIN AND FOLLOW PROCESS AGAIN*
● You can refer this guide that how to find and restore exact firmware for your device using Smart switch before trying
https://www.sammobile.com/forum/showthread.php?t=29914
DroidHackeR said:
Ohhhk now one more tutorial for you and it will help you i guess
1) Download samsung smartswitch application for windows from the link provided below
http://samsungsmartswitch.org/
2) Install latest samsung usb drivers for your s7 edge from below
http://samsungusbdriver.com/download/samsung-driver-v1-5-63-0
3)Now install both samsung smart switch and samsung usb drivers on your windows pc
4) Open samsung smart switch as device administrator on your pc
5) Power off your device and press volume down+home+power button simultaneously untill you get into download mode, now press volume up to continue
6)After installing usb drivers for your phone by pc, your device will be recognised in smart switch
7) Select emergency software recovert option from smart switch
8) It will ask you some information like model no and serial no ( You can find model no and serial no printed below on back panel of phone or on the box of phone)
9) After providing such information, smart switch will locate latest and correct software version to be installed for your device
10) Start update and sit back..It will take some time to update software..After that your device will be reboot and if you are facing bootloop i.e. stuck at samsung logo follow factory reset process i have provided earlier( While your phone stuck at samsung logo for long time, press volume down+power button, screen will turn off now immediatly press volume up+power+home button simultaneously untill you see samsung galaxy s7 edge logo..Now release buttons, you will boot into stock recovery..From there choose wipe data/factory reset option..After reset complete, reboot your device)
*IF SMART SWITCH FAILS TO DETECT YOUR DEVICE, UNINSTALL SAMSUNG USB DRIVER AND INSTALL THEM AGAIN AND FOLLOW PROCESS AGAIN*
● You can refer this guide that how to find and restore exact firmware for your device using Smart switch before trying
https://www.sammobile.com/forum/showthread.php?t=29914
Click to expand...
Click to collapse
i tried, but that installated (DRE), and don't work
Antonije123 said:
i tried, but that installated (DRE), and don't work
Click to expand...
Click to collapse
You have tried both stock flashing through odin and also smart switch recovery still not getting any signal?? I think i have helped you in all possible ways i could suggest..Now you can either wait for any expertised advice or simply visit samsung service centre and ask them to restore you phone's original firmware...Sorry and Regards
[ROM] J710FXXU2AQA8 [4 file firmware] J7 2016 Latest Stock ROM Build Date 2th Feb. 2017 [J710FN]+ Root +Debloated
It's not on sammobile.com
It's not on live.samsung-updates.com
It's only here on XDA
The latest stock ROM for J7'6 J710FN
That was released this February 02 2017 by Samsung.
Devs can use it in their work to make Deodexed or Custom ROMs
ROM: 6.0.1
Baseband: J710FXXU2AQA4
Country: Rusia
Build date: 2th Feb. 2017
Security Patch Level: 1st Jan 2017
Instructions
• It's a 4 file firmware, meaning it's in 4 parts
1. BL_ J710FXXU2AQA8
2. AP_J710FXXU2AQA8
3. CP_ J710FXXU2AQA4
4. CSC_J710FOXY2AQA2
• Download the zip package and unpack it. You'll get four .tar files
• Flash all the 4 files together via ODIN
• Enjoy
• (You can also use only the parts if u need not all 4 files. Well it's up to you)
Please read carefully the installation procedure because I'm not responsible for damage to your equipment or loss of warranty!
Credits
SAMSUNG (for the Smart Switch & ofcourse for the Stock ROM)
4PDA.RU forum http://4pda.ru/forum/index.php?showtopic=763247&st=0
(for providing the latest firmware for SM-J710FN )
Recommended Installation Flow:
FOR OBTAINING ROOT
1. Extract Odin v3.11.1.zip to your computer.
2. Install SAMSUNG_USB_Driver 1.5.61.0 for Odin to find your device.
3. Before flashing is better to go to recovery and do a FACTORY RESET of your phone
4. Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons
while your device reboots.
5. Open Odin as an administrator and choose your 4 files
1. BL_ J710FXXU2AQA8
2. AP_J710FXXU2AQA8
3. CP_ J710FXXU2AQA4
4. CSC_J710FOXY2AQA2
6. Wait for Odin to update the files
7. Connect your phone and wait for Odin to see it , then press Start and wait until you will see PASS and your phone will reboot.
8. Wait for the phone to reboot and do a minimum set up basic just to be able to open Developer options ( after rooting with TWRP you will do
again the set up because you will format data to eliminate encryption in order to be rooted)
9. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
10. Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
11. Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
12. Download the .tar image of TWRP for j7xelte (twrp-3.0.3-1 sm-j710fn).
13. Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons
while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
14. Open Odin and place that twrp-3.0.3-1 sm-j710fn tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
15. Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the
battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
16. At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
17. FORMAT DATA to delete encryption without any patch kernel , the recovery will ask you if you are sure , write yes , and then you will see
there are no errors.
18. To be sure you are safe press DELETE Dalvik cache after FORMAT DATA.
19. Go back to TWRP and on the install choose SuperSU-v2.79-SR2.zip
20. After flash SuperSU-v2.79-SR2.zip you are rooted
21. Go to [Reboot] -> [System].
22. Enjoy the new J710FXXU2AQA8 rooted
Hope you will enjoy the new stock firmware on your J710FN
And for the one who really want all the Samsung crap application to be removed I found and did some changes on a zip made by @TENN3R (Originally made by @ambasadii . Thanks both of you man) and finally come here with this work. Hope you'll love it.
I have tested this zip few times on my device (SM-J710FN) and there's no any fc or issues. So i think it's worth trying.
But as we all say here, I'm not responsible if your device get bootloops, your wife hits you or your dog bites you for some reasons.
Do not forget to hit thanks button
This is made for my personal use of the phone , day by day , and the battery keeps for more than 2 days now.
If you want To know which apps it removes and if you want to keep some system apps, open zip, copy updater script on your pc, open updater script with notepad++, check all apps names one (takes hardly few minutes) and if you want to keep any app in system and don't want to remove it, just remove that whole line. For example, if you want to keep "GoogleContactsSyncAdapter", remove line contains that app name ? runs ("/sbin/rm", "-rf", "system/app/GoogleContactsSyncAdapter"); ? including semicolon same as shown here.
To install the Debloater script :
1. After you complete the setup of your phone with SuperSU-v2.79-SR2.zip
2. Copy J7_710FN_DeBloater2017 on your internal storage
3. Reboot to recovery
4. Flash this zip and wipe dalvik/cache
5. Reboot to system and you'll see that almost all junks is removed.
Please read carefully the installation procedure because I'm not responsible for damage to your equipment or loss of warranty!
As I said from the description , this stock firmware was made for my personal day to day use .
You have all the software used for this in the zip folder with the full description of the applications removed and how to !!!
Hope you will enjoy !!!
Download SM-J710FN 2017 folder from my MEGA folder and you will find everything you need !!!
https://mega.nz/#F!moNHVZ5a!uTp5rlV7oAQQGXDyumNnuQ
I want to install back old version
Any way?
haleem320 said:
I want to install back old version
Any way?
Click to expand...
Click to collapse
you can find on this link the service firmware for SM-J710FN with the 4 files .. and you can go back to what version you want ...
https://cloud.mail.ru/public/HCTK/Rp59xXwpL
i'm using J710FN and my phone is hard brick on Android 7.0 Nougat and can't flash rom with Odin because my phone was knox warranty void but i can flash rom if you backup your Rom for my phone. please help my