Hi, if someone want to speedup LTE Tablet here you go (my TabZ run so smoothly and without LAGs, also with TabZ2 live wallpaper^^).
Requirements:
1. TabZ LTE DEODEXED!
How to deodex 4.4
2. You can flash it on Odexed Rom, but it is strongly recommended to use a deodexed ROM if you want to use Dalvik patch.
How to:
1. Download Qualcomm-optimized Dalvik & Bionic libraries:
Orginal Nexus Thread
Xperia Z Thread about this Fix
2. Clean Dalvik in Recovery
3. Flash and reboot.
4. Download newest Seeder2.0.apk
Orginal Thread
5. Enable Seeder lag reduction, set root privileges and turn on "Suspend RNG service", "Start automaticly on boot" and RNG Service: Moderate.
6. Download form Play Store "No-Frills CPU Control":
Google Play
7. Set: min/max 384/1512, interactive CPU Control with CFQ, Start automaticly on boot, save everything.
thats all, just reboot your Device
Extra:
8. If you want you can download Greenify App It works quiet well
Play Store
Does this work with the SGP311 variant as well?
Jequan said:
Does this work with the SGP311 variant as well?
Click to expand...
Click to collapse
i think so, but deodex is only for sgp321
Dalvik versions inside your zip are the same that are in KitKat ROM (.230). Bionic versions are different, but there are thoughts that ROM actually contains newer versions.
So flashing this will actually do practically nothing considering performance, benchmarks.
Well, I would recommend you to try CM11 if you really want a great performance enhancement...
Even better if you enable ART...
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
2 questions:
If I root and follow directions above I probably loose warranty?
And what is the impact on battery?
AllanJacques said:
Well, I would recommend you to try CM11 if you really want a great performance enhancement...
Even better if you enable ART...
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
I tested pretty much any available 4.4 ROM out there and just recently installed the sony 4.4.
I don't see any difference in performance besides laggy settings wich seems to be a bug in the sony ROM.
I have tested ART and used it allways with custom ROMs but to be honest: I never felt even the slightest difference between ART and Dalvik.
CM11 didn't perform any better then the official firmware either in my opinion. I never did any benchmarksa though.
Well, what can I say?
I didnt run any benchs either but as far as feelings go I feel CM11 faster and smoother than any sony iteration I have tested, granted that I didnt test KK.
I guess it is a matter of preference indeed, I got a new tablet when changed to CM11 but I wouldnt change my Z1 rom as I dont think there is any advantage to it.
Nonetheless, if anyone care to try CM11 or AOKP I urge them to do so!
AllanJacques said:
Well, I would recommend you to try CM11 if you really want a great performance enhancement...
Even better if you enable ART...
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
I've tried flashing CM11, for some reason it's not booting.
Checked MDSum, internal external SD. No chance
Gesendet von meinem SGP321 mit Tapatalk
romskii said:
I've tried flashing CM11, for some reason it's not booting.
Checked MDSum, internal external SD. No chance
Gesendet von meinem SGP321 mit Tapatalk
Click to expand...
Click to collapse
First you have to flash boot.img
By the way, try Omni Rom, it's even better than cm11
Sent from my C6943 using Tapatalk
AllanJacques said:
First you have to flash boot.img
By the way, try Omni Rom, it's even better than cm11
Sent from my C6943 using Tapatalk
Click to expand...
Click to collapse
boot.img? Hmm...I've done all the normal rooting process and flashed kitkat and just don't thought about an boot.img.
Do you have a guide? Maybe you can send me a pm to keep this thread clean from off topic
ryany67 said:
Hi, if someone want to speedup LTE Tablet here you go (my TabZ run so smoothly and without LAGs, also with TabZ2 live wallpaper^^).
Requirements:
1. TabZ LTE DEODEXED!
How to deodex 4.4
2. You can flash it on Odexed Rom, but it is strongly recommended to use a deodexed ROM if you want to use Dalvik patch.
How to:
1. Download Qualcomm-optimized Dalvik & Bionic libraries:
Orginal Nexus Thread
Xperia Z Thread about this Fix
2. Clean Dalvik in Recovery
3. Flash and reboot.
4. Download newest Seeder2.0.apk
Orginal Thread
5. Enable Seeder lag reduction, set root privileges and turn on "Suspend RNG service", "Start automaticly on boot" and RNG Service: Moderate.
6. Download form Play Store "No-Frills CPU Control":
Google Play
7. Set: min/max 384/1512, interactive CPU Control with CFQ, Start automaticly on boot, save everything.
thats all, just reboot your Device
Extra:
8. If you want you can download Greenify App It works quiet well
Play Store
Click to expand...
Click to collapse
Will this work on tab z2?
xPoiled said:
Will this work on tab z2?
Click to expand...
Click to collapse
i dont think so... you have to build z2 deodex pack.
Related
SCRIPT:
DECRAPIFIER:
It works on a simple mechanism. When you run the script with root permission in Script Manager it moves all the apks listed in the script to a seperate folder so that it frees your internal memory gives some RAM boost. It is just like Freeze function of Titanium Backup.
It helps saving battery too because there will be less apps installed after running this script.
>>>>>>YOU LOSE THE WIDGETS<<<<<<
CRAPIFIER:
It simply reverts the move done by decrapifier script. Crapifies your Internal
NOTE:
YOU CAN DELETE THE COMMAND FOR A PARTICULAR APP IF YOU DONT WANT IT TO BE DISABLED.
NOTE:
APP DATA IS NOT LOST IN THIS PROCESS SO IT IS SAFE TO USE IT
HOW TO USE:
1. Install Script Manager (link given down)
2. Run Decrapifier as root
3. Enjoy.
HOW TO DISABLE:
4. Run Crapifier
5. Enjoy.
TWEAK:
This tweak NOS'd improves the overall performance of your phone. It cleans up junk, sets some values, Zipaligns, SQlite's , some changes in governor settings, remounts , partition handling, etc.. and TAADA... a faster phone. Sometimes improvement may not be that good if your phone is already in good condition.. but it sure improves performance.
HOW TO USE:
1. Go to CWM.
2. Install the zip.
3. Reboot.
4. Enjoy.
compatible with all roms
Testers:
1. Me
2. Cascabel
3. sgt.meow
4. ScatteredHell
Credits:
1. Cascabel
2. sgt.meow
3. ScatteredHell
Script V1:
Decrapifier:
http://www.mediafire.com/download.php?l2dma6d91xknk4u
Crapifier:
http://www.mediafire.com/download.php?cjy69djdxpydi4g
Tweak V1:
http://www.mediafire.com/download.php?rbhy94hxuylr03y
Tweak V2
http://www.mediafire.com/download.php?7u9yah3fuyr4crj
Script manager in attachment.
for future releases..
nice
RohinZaraki said:
nice
Click to expand...
Click to collapse
links up... will you try?
I have set and configured some apps , after using this I got to reconfigure them?? *Widgets*
noobismyname said:
I have set and configured some apps , after using this I got to reconfigure them?? *Widgets*
Click to expand...
Click to collapse
the apps wont have to be reconfigured.. only noFrillsCPU needs to be reconfigured.. and Widgets.. you lose them all..
will add the widget support in V2..
you can use the tweak though... it will give no problem
ahhh thanxx....i wanted something like this...will try it asap!
kamaal kar diya yaar
Keep walking bro :thumbup:
This works on JB ?
Sent from my Crappy Xperia X8 using Tapatalk 2
It should work. I tried on JB once; it increased performance slightly (because I had no apps installed). It's a good script. Try it.
sidewalk_ said:
This works on JB ?
Sent from my Crappy Xperia X8 using Tapatalk 2
Click to expand...
Click to collapse
it works on any rom any phone
sgt. meow said:
It should work. I tried on JB once; it increased performance slightly (because I had no apps installed). It's a good script. Try it.
Click to expand...
Click to collapse
thanks for answering the question buddy...
NOS'd version 2 coming up tomorrow. Basic and essential changes. Anyone up for testing?
W8ing for nxt update good job:thumbup:
Sent from my Sony Walkman to yours
NOS'd V2 up...anyone for testing?
@iamnice dont use V2 on nexus 7 if you use higher VM. It will lower performance because it allows max vm heapsize of 64 mb
Just flshed nos v2
Slight increase in performance
Decrappifier deleted my calculator, calender, browser so crappifier installd
Sent from my Sony Walkman to yours
jadhavtushaar said:
Just flshed nos v2
Slight increase in performance
Decrappifier deleted my calculator, calender, browser so crappifier installd
Sent from my Sony Walkman to yours
Click to expand...
Click to collapse
thanks for testing bro
Good job by the way i installed it on my minicm9 rom
Sent from my Sony Walkman to yours
Hi guys,
I've just brought this fantastic device, and I'm very happy about it. He is really snappy whit Nova launcher However I would like to receive some suggestions from you on how to get the best from our N10.
For example, I was thinking to install a custom rom and a custom kernel, but I rly don't know which and I don't know if they rly can give some advantages.
I was thinking something like purity rom (because of tweaked bionic and dalvik libraries) + KT Kernel (because it has been recently updated). Or maybe KT kernel + stock rom + ART
What do you think? Have you got any suggestion? Tell me
PS: sry for my bad English
Hi,
I've been using CyanogenMod 11 with its own kernel for some long time now, it never ceased to disappoint me! However, it's not recommendable creating threads asking for the "best kernel/ROM", the best thing to be done is downloading and trying yourself until you find something that suits well your needs . CM11 with NOVA Launcher was good enough for me hehe.
~Lord
XxLordxX said:
Hi,
I've been using CyanogenMod 11 with its own kernel for some long time now, it never ceased to disappoint me! However, it's not recommendable creating threads asking for the "best kernel/ROM", the best thing to be done is downloading and trying yourself until you find something that suits well your needs . CM11 with NOVA Launcher was good enough for me hehe.
~Lord
Click to expand...
Click to collapse
Eheh I know that, but I'm not a flash maniac, and rly I have fear to brick my device flashing and re-flashing roms on roms... That's why I'm asking your opinion. I would like to find immediately the best solution, flash it and then don't touch the device more.
However the for your opinion. I will keep it in mind
OmniSlyfer said:
Hi guys,
I've just brought this fantastic device, and I'm very happy about it. He is really snappy whit Nova launcher However I would like to receive some suggestions from you on how to get the best from our N10.
For example, I was thinking to install a custom rom and a custom kernel, but I rly don't know which and I don't know if they rly can give some advantages.
I was thinking something like purity rom (because of tweaked bionic and dalvik libraries) + KT Kernel (because it has been recently updated). Or maybe KT kernel + stock rom + ART
What do you think? Have you got any suggestion? Tell me
PS: sry for my bad English
Click to expand...
Click to collapse
I think that the first thing you need to ask yourself is what are your priorities with this device? For instance gaming performance, media consumption, is stability paramount... Etc?
You may want to start off with rooted stock and add the XPosed framework plus modules that give you custom ROM features particularly Gravity Box. If you need more then change your kernel (Franco, KTManta ... Etc). No matter which way you go take nandroid backups and save them off your device before making a significant change (kernel, custom ROM, moving away from stock). Your recovery of choice will provide you with the nandroid backup/recovery functions.
Also read, read... Knowing the focus of a specific kernel or ROM will help in making your choices balanced by the issues other users are having.
Good luck.
Sent from my Nexus 10 using XDA Premium HD app
3DSammy said:
I think that the first thing you need to ask yourself is what are your priorities with this device? For instance gaming performance, media consumption, is stability paramount... Etc?
You may want to start off with rooted stock and add the XPosed framework plus modules that give you custom ROM features particularly Gravity Box. If you need more then change your kernel (Franco, KTManta ... Etc). No matter which way you go take nandroid backups and save them off your device before making a significant change (kernel, custom ROM, moving away from stock). Your recovery of choice will provide you with the nandroid backup/recovery functions.
Also read, read... Knowing the focus of a specific kernel or ROM will help in making your choices balanced by the issues other users are having.
Good luck.
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
Thank for the answer.
Yeah I always read all the feature of roms... But they never speak about optimization or performance. They always add features and options on Android but... Nothing I can't get with gravitybox.
What I need is smoothness. Not necessarily game performance, but speed while moving from app to app without microlag.
However, let me ask here other questions without opening another thread:
1)Is it normal that, when trying to access the recovery (my device is locked and not rooted) it display "no commands"? Do I need to unlock the device to get into recovery?
2) Can you suggest me a program make backups of my games saves and apps without root? Because I need to backups my data before unlocking the device...
OmniSlyfer said:
Thank for the answer.
Yeah I always read all the feature of roms... But they never speak about optimization or performance. They always add features and options on Android but... Nothing I can't get with gravitybox.
What I need is smoothness. Not necessarily game performance, but speed while moving from app to app without microlag.
However, let me ask here other questions without opening another thread:
1)Is it normal that, when trying to access the recovery (my device is locked and not rooted) it display "no commands"? Do I need to unlock the device to get into recovery?
2) Can you suggest me a program make backups of my games saves and apps without root? Because I need to backups my data before unlocking the device...
Click to expand...
Click to collapse
Well, I can't really speak on custom ROMs and kernels because I'm perfectly happy with running stock rooted with Xposed Framework on my N5, N7 (2013) and N10. But, to answer your questions:
1) Yes, it's normal. When you boot into Recovery, all you initially see is the android laying on his back with a red exclamation mark over him. In order to get the commands to show, you need to hit power + volume down (or maybe up, I always forget) at the same time. It can take a few tries with the buttons, but they'll eventually show up.
2) I believe an app called Helium is what you are looking for. I've never used it since I'm already rooted and use Titanium Backup, but I believe it kind of works the same as Titanium Backup.
charesa39 said:
I'm perfectly happy with running stock rooted with Xposed Framework on my N5, N7 (2013) and N10.
Click to expand...
Click to collapse
Do you mind providing the instructions of installing Xposed Framework on N4 and N10? Thanks a lot!
Nexus devices are very very hard to brick. Luckily. So no worries there mate. As for roms. Long story short: there is no best rom. If you want speed juat overclock the beast..
Sent from my Galaxy Nexus using xda app-developers app
mj56gt said:
Do you mind providing the instructions of installing Xposed Framework on N4 and N10? Thanks a lot!
Click to expand...
Click to collapse
No problem. Everything you need to know can be found in this thread: http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401.
It's pretty straightforward. Just install the Xposed Installer apk, then go into the Xposed Installer app and hit "Install/Update". Reboot, and Xposed Framework should be installed. Then, just go back into the Xposed Installer app and click "Download" and choose whatever Modules you want to run. My personal favorites are Gravity Box, Unicon (purchased through the Play Store), Xuimod, and App Settings. I also have the Xposed GEL Settings (XGELS) Module, but only on my Nexus 10 since I love the Google Now Launcher, but it shrinks the icon grid considerably. So XGELS allows me to get the same number of icons on the GN Launcher as the default launcher.
Edit: Oh, and here is a collection of the Modules so you can see what each of them do: http://forum.xda-developers.com/xposed/modules/index-collection-xposed-modules-post-t2327541
charesa39 said:
No problem. Everything you need to know can be found in this thread: http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401.
It's pretty straightforward. Just install the Xposed Installer apk, then go into the Xposed Installer app and hit "Install/Update". Reboot, and Xposed Framework should be installed. Then, just go back into the Xposed Installer app and click "Download" and choose whatever Modules you want to run. My personal favorites are Gravity Box, Unicon (purchased through the Play Store), Xuimod, and App Settings. I also have the Xposed GEL Settings (XGELS) Module, but only on my Nexus 10 since I love the Google Now Launcher, but it shrinks the icon grid considerably. So XGELS allows me to get the same number of icons on the GN Launcher as the default launcher.
Edit: Oh, and here is a collection of the Modules so you can see what each of them do: http://forum.xda-developers.com/xposed/modules/index-collection-xposed-modules-post-t2327541
Click to expand...
Click to collapse
Thanks a lot for the detailed help!
A couple of questions:
1) Is backup necessary before the installation?
2) Does the Enable Translucent Decor module hide the navigation and notification bars?
3) Would the installation of the Xposed framework interfere with the stock ROM updates later on?
Thanks again for your kind help...
mj56gt said:
Thanks a lot for the detailed help!
A couple of questions:
1) Is backup necessary before the installation?
2) Does the Enable Translucent Decor module hide the navigation and notification bars?
3) Would the installation of the Xposed framework interfere with the stock ROM updates later on?
Thanks again for your kind help...
Click to expand...
Click to collapse
No problem.
1) It's not really necessary, but before installing/flashing anything that can modify system files, I always think it's a good idea to make a backup beforehand. You never know. That being said, it's all really simple.
2) If you're talking about the solid black background in the notification and navigation bars, then yes. It doesn't completely get rid of them, it just makes the black bar transparent like it should be when using the Google Now Launcher. I don't use that specific module because I already use Gravity Box, and it already has that option to enable translucent decor. It works flawlessly. I don't know why Google said it causes issues on the Nexus 10. If you want to completely get rid of those two bars, you need to enable something like PIE controls and Expanded Desktop.
3) Yes. But the solution is simple. When you want to update via OTA, all you have to do is go into the Xposed Installer app, and under Framework, just click Uninstall. This replaces the modified Framework with the stock Framework so you can update via OTA without any issues. You don't even have to uncheck or uninstall your Modules or the Xposed Installer app itself. Then, after updating, you'll probably just have to re-root by flashing SuperSU in recovery (unless you have survival mode enabled). After that, simply go back into the Xposed Installer app, and under Framework again, click Install/Update. As long as you left your Modules as is, your setup should be back to how it was before you took the OTA.
Well guys, i think I'm going to install SlimKat 4.0 and KTmanta Kernel... I will tell you if I'm satisfied of my choice
Ok guys, I've done some tests and now I've decided too keep Purity rom + ART... And the results are incredible!
23000 score on Antutu benchmark
9000 with Quadrat
Incredible performances and a GREAT battery life, much better than stock rom with dalvik
I think that the tweaked ART and Kernel of Purity Rom deliver the best experience with our device. I suggest it, you will be surprised of the benefits you can get!
Thank to everyone who helped me in this thread
I have been very happy with my AOKP and Franco Kernel combination.
I've installed Purity ROM + ART and it's fast - but i still think stock 4.3 is faster. I tried KTManta and that didn't change things despite overclocking the CPU and GPU.Wish we could have ART on a 4.3 rom.
Are there any recommended 4.3 rom/kernel combos that give good performance?
Edit: First time i installed Purity I didn't install GApps. It was incredibily smooth and fast. After installing GApps, it became laggy again, similar to my experience of stock 4.4.2.
sheyac said:
I've installed Purity ROM + ART and it's fast - but i still think stock 4.3 is faster. I tried KTManta and that didn't change things despite overclocking the CPU and GPU.Wish we could have ART on a 4.3 rom.
Are there any recommended 4.3 rom/kernel combos that give good performance?
Edit: First time i installed Purity I didn't install GApps. It was incredibily smooth and fast. After installing GApps, it became laggy again, similar to my experience of stock 4.4.2.
Click to expand...
Click to collapse
Do you really find 4.3 faster then kitkat + art? It's really strange. Well I know that the latest jelly bean firmware maybe is built better than 4.4.2 (which has got some bugs here and there, and yeah I prefer JB device options format) but ART is unbeatable, except by a very well tweaked Dalvik library.
However I think I know maybe why Purity 4.4.2 seems laggy to you. Maybe it's Google now launcher + transparent status bar & notification bar.
I've changed the launcher to Nova (but u can use Apex and similar) and immediately disabled translucent bars. It's smooth like butter now. With tra translucent bars, instead, everything was a little laggy and not fluid. In particular the Drawer scrolling was clearly laggy.
So, try to Nandroid backup, flash again Purity + Gapps. Then change Launcher (and unistall the google one if u want) and disable translucent bars. Then activate ART.
That's what I've done and I'm very happy of the performance provided by my Nexus 10
Also now I'm trying KTmanta Kernel. I didn't found increased performances, but I really like the possibility to undervolt both CPU & GPU. Undervolt = less energy request = No overheat = best battery life
SmokinCharger said:
I have been very happy with my AOKP and Franco Kernel combination.
Click to expand...
Click to collapse
But it doesn't support Undervolting, am I right?
OmniSlyfer said:
But it doesn't support Undervolting, am I right?
Click to expand...
Click to collapse
Franco kernel supports undervolting
PHP:
SmokinCharger said:
Franco kernel supports undervolting
Click to expand...
Click to collapse
This is cool
I' going to test KTmanta for another week, then I will switch to Franco kernel to see which is better
Sure I agree the general UI and multitasking is snappier with 4.4.2 with ART than 4.3.1...BUT I primarily bought the nexus 10 to consume media (e.g. video, ebooks, music) and for me buttered AOKP 4.3 is much smoother when watching video than any 4.4.2 rom/kernel combo I tried. The trade off is a bit of stutter in the UI but I can live with that. Video was just terrible on 4.4.2, including audio sync lag and plenty of dropped frames.
Can't wait to see how 4.5 behaves with video as I really like ART!
We Sonic Developers have decided to give focus on the S4 active forums to make it a better place to live in :fingers-crossed: ... and here you go another work by us for you guys :good:
Welcome to VanirAOSP. Our mission is to deliver a clean optimized version of Android with subtly improved versions of the features you love to as many devices as possible. we've tried to incorporate and improve our features in a way that makes them more cohesive to improve the overall user experience while correcting any performance regressions and improving functionality..
What to expect:
- This is not a McCopy ROM. What goes into our build is well thought-out and not a bunch of stuff duck taped together because we could.
- maximum optimization. We do our research. We test hard. We build thoroughly tested global optimizations including standard linaro.
- originality in our source. We generate a lot of new commits being features or general code improvements. We are open source to share and improve the community but we also try to make sure we offer a unique experience.
- aesthetics.. hopefully in your opinion
General features:
SU, busybox etc
stock mode - ability revert to stock AOSP code with the exception of a few custom features we chose to keep active
enhanced performance.. longer uptime with less slowdown
custom written CRON and init.d etc
UI and graphics improvements
custom navbar, navring, and hardware key features
halo (active display & lockscreen notifications are in review)
usability improvements like power reboot menu and sound
animation control
Improved Vanir keyboard
CM's profiles & quicksettings
additional quicksetting tiles
immersive mode
statusbar mods
clock & battery mods
lockscreen blur and other mods
soon to come -> quick cam and flash notifications
busybox, embedded root, init.d, cron etc
yatta yatta yatta
more to come when i feel like updating the op
Please help us continue developing, or simply just toss me some change for a coffee
kernel source
Get the rom from HERE
reserved
!
Downloading, but very poor downloadspeed
Gesendet von meinem GT-I9295 mit Tapatalk
So far no significant bugs found and running very smooth
Gesendet von meinem GT-I9295 mit Tapatalk
If I come from unofficial cm11, is anything needed beside full wipe?
Gesendet von meinem GT-I9295 mit Tapatalk
I came from unofficial cm11.
Did a full wipe (dalvik, cache, factory reset).
Then installed VanirAOSP and gapps.
And everything running smooth.
Gesendet von meinem GT-I9295 mit Tapatalk
4cr0ph3t said:
I came from unofficial cm11.
Did a full wipe (dalvik, cache, factory reset).
Then installed VanirAOSP and gapps.
And everything running smooth.
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
great !
olarf said:
If I come from unofficial cm11, is anything needed beside full wipe?
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
if you want gapps flash gapps after flashing rom :laugh:
Super rom! Haven't found any bugs so far.
Sent from my GT-I9295 using Tapatalk
nice rom.
just a little problem: adding a aptoide store link will open a browser popup and i can't add any store.
on other rom sems work propely I think is rom relative.
thanks
Very good, realy fast ROM!!!
I've one problem. I need to use PIN for a lock screen, if I reboot the phone I can't write any number and can't lock the phone.
EDIT:
I push it to a charger after 1-2 hour the PIN pad works
Is NFC working?
Pkt_Lnt said:
Is NFC working?
Click to expand...
Click to collapse
Yes nfc is working. I used it to beam pictures from my Galaxy Nexus.
Sent from my GT-I9295 using Tapatalk
Hi
How do I install this ROM?
I'm on official 4.2.2 without any modifications.
Can I just install recovery (CWM), wipe, and flash?
Thanks!
I9295 BTW
oori002 said:
Hi
How do I install this ROM?
I'm on official 4.2.2 without any modifications.
Can I just install recovery (CWM), wipe, and flash?
Thanks!
I9295 BTW
Click to expand...
Click to collapse
You have to root your phone first.
I used Chainfire's cf auto root.
There is a pretty good guide here: http://androidxda.com/root-samsung-galaxy-s4-active-gt-i9295
And then install a custom recovery
http://forum.xda-developers.com/showthread.php?t=2387980
Now you are ready to install custom ROM
Sent from my GT-I9295 using Tapatalk
I found a little "bug"
After OTA update (052514) when pressing the Vanir update tile in quick settings, it flips the screen to show notifications.
Before updating it took me to the update screen.
It's no big deal, just thought I'd report it
Sent from my GT-I9295 using Tapatalk
When i try to change preferred network type to gsm only
I get this bug
"Unfortunately, the process
Com.android.phone
Has stopped"
Any help ???
Please
أرسلت بواسطة iPad بإستخدام Tapatalk
noofo said:
When i try to change preferred network type to gsm only
I get this bug
"Unfortunately, the process
Com.android.phone
Has stopped"
Any help ???
Please
أرسلت بواسطة iPad بإستخدام Tapatalk
Click to expand...
Click to collapse
Same thing here. I never use it, so I didn't notice before.
EDIT: When trying to enable android debugging, i get Unfortunately, Settings has stopped.
When i go back in Developer options, debugging is enabled but doesn't work.
Sent from my GT-I9295 using Tapatalk
It takes 38 Seconds to power on my device , isn't that too long for simple rom ???
أرسلت بواسطة iPad بإستخدام Tapatalk
People with the gsm selection bug ... This bug is because the rom source doesn't allow for changing such things so we had to fix a lot of conflicts ... Just go up with selections s little bit and choose other modes until it shows gsm , the modes mashed up ....USB debugging issue is there because maybe u haven't done a data wipe , if not please do one a give me results ... MY DEVICE IS UNDER MAINTENANCE ... Thank you people for using ROMs .
Recently, when looking for a ROM for my Nexus 7 (2013) I found, that those guys actually also build ROMs for our Z3C. Been using them for several months now and I am very satisfied - very stable ROM.
So here you go:
www.exodus-developers.net/exodus-5.1/z3c/
Xposed users:
Wipe Cache + Dalvik after flashing Xposed. Wipe also after recovering apps with Titanium Backup with already installed Xposed.
Exodus Updater - like in CyanDelta you can add additional zips to be flashed with ROM updates (find it in settings), like custom kernel / Xposed /... (M5 kernel is awesome and works great with Exodus)
Zwulf said:
Recently, when looking for a ROM for my Nexus 7 (2013) I found, that those guys actually also build ROMs for our Z3C. Been using them for about 10 days and I am very satisfied, very stable ROM.
So here you go:
www.exodus-developers.net/exodus-5.1/z3c/
Btw. you can find an Exodus updater app in Play Store - like in CyanDelta you can add additional zips to be flashed with ROM updates (find it in settings), like custom kernel / Xposed /... (M5 kernel is awesome and works great with Exodus)
Mods: If this is the wrong place for the thread or offends anyone in any way: sorry, please remove it. Just wanted to post it, where people usually watch out for ROMs, so they find it quickly - I didn't see an Exodus thread yet in Z3C sections.
Click to expand...
Click to collapse
How about the camera? There is the reverse fisheye bug right?
sfrique said:
How about the camera? There is the reverse fisheye bug right?
Click to expand...
Click to collapse
Sadly, yes. Didn't find a custom ROM without it yet. Also got it in stock, but the effect is not as strong there. Still no clean pic with Z3C, neither in stock nor in any custom ROM. Anyway a very good ROM.
Gesendet von meinem Nexus 7 mit Tapatalk
Zwulf said:
Sadly, yes. Didn't find a custom ROM without it yet. Also got it in stock, but the effect is not as strong there. Still no clean pic with Z3C, neither in stock nor in any custom ROM. Anyway a very good ROM.
Gesendet von meinem Nexus 7 mit Tapatalk
Click to expand...
Click to collapse
How good is the support for this ROM, because on the part of custom ROM support is one of the most needed part.
loopguru said:
How good is the support for this ROM, because on the part of custom ROM support is one of the most needed part.
Click to expand...
Click to collapse
Well, there is no ROM-thread for Z3C Exodus build... I'm not the creator nor the maintainer of the build, just found it and wanted to share the link, so it's hard for me to say how good the support is, didn't need it yet - everything works fine on my device. Not one single random reboot with Xposed since I use this ROM.
If you need support you probably should watch out on G+ (read pinned post!):
https://plus.google.com/communities/106801227383087889476
Great ROM, been running it for months, Devs are aggressive on bug fixing.
What is the base of the ROM ?
I also installed it today. Wisely many things are not added in this rom, like camera, calendar, music. 9th October build is going into bootloop bcoz of xposed installer, anyone having similar issues
Sent from my GT-I9192 using XDA Free mobile app
nathan30 said:
What is the base of the ROM ?
Click to expand...
Click to collapse
CM12.1 nightlies.
loopguru said:
I also installed it today. Wisely many things are not added in this rom, like camera, calendar, music. 9th October build is going into bootloop bcoz of xposed installer, anyone having similar issues
Sent from my GT-I9192 using XDA Free mobile app
Click to expand...
Click to collapse
I'm using it with M5 permissive kernel and Slim Zero Gapps. Try this config, works great for me, no bootloops. You should wipe cache and dalvik directly after flashing Xposed, without doing this you will probably run into a bootloop or get a system starting and constantly rebooting after system is up. Use latest version (v75 arm) of Xposed.
Zwulf said:
CM12.1 nightlies.
I'm using it with M5 permissive kernel and Slim Zero Gapps. Try this config, works great for me, no bootloops. You should wipe cache and dalvik directly after flashing Xposed, without doing this you will probably run into a bootloop or get a system starting and constantly rebooting after system is up. Use latest version (v75 arm) of Xposed.
Click to expand...
Click to collapse
What is the things add by this ROM instead of CM12.1 ?
nathan30 said:
What is the things add by this ROM instead of CM12.1 ?
Click to expand...
Click to collapse
You could easily give it a shot with MultiROM. I'm too lazy to list everything here... ;-P
There are quite a few things. Most important ones for me personally are the customizable clear all button in recents, customizable navigation bar height, double tap to sleep on lockscreen (double tap anywhere) and four tiles per row in quick settings. I also like it to be able to deactivate navigation ring as I never use it and it only gets on my nerves when accidentally swiping over the navigation bar.
It is not this rom version but you can say build after 5th October causing this kind of problem. May be some minor bug with latest builds
Sent from my Xperia Z3C using XDA Free mobile app
loopguru said:
It is not this rom version but you can say build after 5th October causing this kind of problem. May be some minor bug with latest builds
Sent from my Xperia Z3C using XDA Free mobile app
Click to expand...
Click to collapse
No problem with bootloops except one case:
1) Factory Reset
2) Flash ROM
3) Flash M5 (permissive) kernel (for V4A)
4) Flash Xposed v75 arm
5) Wipe cache & dalvik
6) Boot up system
7) Restore many (300+) apps with Titanium Backup
In this case ROM will reboot shortly after TB is closed and a few seconds after system is running and up it will reboot and do this again and again until the battery is empty.
Solution: Boot to recovery, wipe cache & dalvik again. Everything should be fine now, no more bootloops.
This behavior also occurs on CM12.1 nightlies for me so seems to have nothing to do with the ROM itself but rather CM base.
Zwulf said:
No problem with bootloops except one case:
1) Factory Reset
2) Flash ROM
3) Flash M5 (permissive) kernel (for V4A)
4) Flash Xposed v75 arm
5) Wipe cache & dalvik
6) Boot up system
7) Restore many (300+) apps with Titanium Backup
In this case ROM will start and a few seconds after system is running and up it will reboot and do this again and again until the battery is empty.
Solution: Boot to recovery, wipe cache & dalvik again. Everything should be fine now, no more bootloops.
This behavior also occurs on CM12.1 nightlies for me so seems to have nothing to do with the ROM itself but rather CM base.
Click to expand...
Click to collapse
Thanks for the reply, i moved out of this ROM ,bootloop problem sorted out with exposed v75 arm.
loopguru said:
Thanks for the reply, i moved out of this ROM ,bootloop problem sorted out with exposed v75 arm.
Click to expand...
Click to collapse
Same here, without Xposed no bootloop at all. With Xposed: constantly rebooting after recovering apps (Xposed already installed) but gone after wiping cache & dalvik again.
hey guys. have someone problem with navbar? idk why is doesnt show buttons in landscape. i tryed to implement other navbar with gravitybox, but same.
it keep sayin error 7!
whats the problem?
hmnt said:
it keep sayin error 7!
whats the problem?
Click to expand...
Click to collapse
that should help u
Hi guys, yesterday i find other marshmallow roms for our z2, and i decided to share it to you ..
Knowing bugs:
- Camera not working
- Extcard not detected, but you can use file manager to copy extcard content to sdcard from /mnt/media_rw path, see this commit to fix it, confirmed working by me ?
- no dt2w on settings, but you can enabled it manually, type su -c echo enabled >> /sys/devices/virtual/input/max1187x/power/wakeup in terminal app, need to retype after reboot
- You tell
DOWNLOAD ROM HERE!
Credits to fxp, cm and vanir
Thangs
why would yo release this? It has the same bugs as aosp one for z2 and without camera and external card the phones really feels handicapped.
azam_ said:
why would yo release this? It has the same bugs as aosp one for z2 and without camera and external card the phones really feels handicapped.
Click to expand...
Click to collapse
I'm not developer, i just share it ..
Sent from my Xperia Z2 using Tapatalk
azam_ said:
why would yo release this? It has the same bugs as aosp one for z2 and without camera and external card the phones really feels handicapped.
Click to expand...
Click to collapse
He is just shared it.. He is not the developer.. Just read his OP first.. Anyway AOSP 5.1.1 seems no bugs.. Latest builds works cool..
Rajeev said:
He is just shared it.. He is not the developer.. Just read his OP first.. Anyway AOSP 5.1.1 seems no bugs.. Latest builds works cool..
Click to expand...
Click to collapse
What's the best AOSP 5.1.1 ROM in your opinion?
Gus194 said:
What's the best AOSP 5.1.1 ROM in your opinion?
Click to expand...
Click to collapse
This one. The one in the OP download link.. Its the best available. No bugs.. Its the best AOSP 5.1.1 available for Z2. Grab it and enjoy.. Pick latest build..
Hei bro @itsnie
Thanks alot for sharing the perfect stable AOSP 5.1.1 for Z2. Flashed the latest build in my friend's Z2 today. No bugs. Camera seems better than CM and decent. This AOSP 5.1.1 coming with CM Theme engine. So u can install various CM themes also..
Installed latest sony home + Music + Album + Video + Invisible Power button SystemUI + modded settings + flash light mod + Dolby with Louder stereo speakers mod etc in this build. Now its perfect.. I am using his mobile right now for further testing.. Thanks again for sharing the link..
Rajeev said:
Hei bro
Thanks alot for sharing the perfect stable AOSP 5.1.1 for Z2. Flashed the latest build in my friend's Z2 today. No bugs. Camera seems better than CM and decent. This AOSP 5.1.1 coming with CM Theme engine. So u can install various CM themes also..
Installed latest sony home + Music + Album + Video + Invisible Power button SystemUI + modded settings + flash light mod + Dolby with Louder stereo speakers mod etc in this build. Now its perfect.. I am using his mobile right now for further testing.. Thanks again for sharing the link..
Click to expand...
Click to collapse
Hi too, i'm confusing about this, the latest build of vanir rom is android 6.0.1 not 5.1.1, also vanir rom is based on cyanogenmod, not a pure aosp, that's why they have cm theme engine and similar to cm ..
Oh so the latest build have camera working ?, i'll test later, i'm on 0104 build and my camera's still error
itsnie said:
Hi too, i'm confusing about this, the latest build of vanir rom is android 6.0.1 not 5.1.1, also vanir rom is based on cyanogenmod, not a pure aosp, that's why they have cm theme engine and similar to cm ..
Oh so the latest build have camera working ?, i'll test later, i'm on 0104 build and my camera's still error
Click to expand...
Click to collapse
No my friend. U misread. I am talking about latest build of 5.1.1. Not 6.0.1. U can see latest build of 5.1.1 there. In 6.0.1 no camera available..
Rajeev said:
No my friend. U misread. I am talking about latest build of 5.1.1. Not 6.0.1. U can see latest build of 5.1.1 there. In 6.0.1 no camera available..
Click to expand...
Click to collapse
Oh that's why i'm confused [emoji23] [emoji23] [emoji23]
Sent from my Xperia Z2 using Tapatalk
Why latest version is android 6.0.0 and not android 6.0.1?
katibehi said:
Why latest version is android 6.0.0 and not android 6.0.1?
Click to expand...
Click to collapse
Latest is android 6.0.1
Thanks for sharing, I'll try this ROM.
Sent from my D6503 using Tapatalk
If you want to use the 6.0.1 version, you must use the DHO Gapps
http://www.emccann.net/dho/5-Gapps/60arm-DHO-GAPPs.zip
Otherwise Google Play Services will FC!
(Would be good, if added to op.... searched 2 hours for this xD)
For enabling d2tw you can use M5Settings APK (enable root in dev settings before)
http://dl.myself5.de/M5 Settings/
Love the rom... so smooth <3
Duilio Patiño said:
Thanks for sharing, I'll try this ROM.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
You welcome
Mikey94 said:
If you want to use the 6.0.1 version, you must use the DHO Gapps
http://www.emccann.net/dho/5-Gapps/60arm-DHO-GAPPs.zip
Otherwise Google Play Services will FC!
(Would be good, if added to op.... searched 2 hours for this xD)
Love the rom... so smooth <3
Ext SD-Card working fine more me.
Click to expand...
Click to collapse
No no no, cm based rom can use any gapps (for now), because (see my attachment)
Also i feel more battery friendly :laugh:
I can tell you, that open gapps and Bank gapps dont work i get fc of gp Services in Setup Wizard. I didnt Boot between flashing!
If you Boot up Rom and then install gapps, Setup Wizard is perma fc...
Rajeev said:
This one. The one in the OP download link.. Its the best available. No bugs.. Its the best AOSP 5.1.1 available for Z2. Grab it and enjoy.. Pick latest build..
Click to expand...
Click to collapse
Even I've not used it yet but I guess it has an issue. After a long time using with WiFi, mobile data won't work unless doing a reboot or toggle airplane mode (this issue is caused by baseband), in Carbon ROM, mobile data even got FCs. I've just backed to stock yesterday, wish I read this post earlier.
The mobile data issue can be fixed by replace the /system/etc/firmware folder, I replaced one from stock sony but got another issue with bluetooth, you can give a try with the firmware which is taken from this, test it and report.
RyTekk said:
Even I've not used it yet but I guess it has an issue. After a long time using with WiFi, mobile data won't work unless doing a reboot or toggle airplane mode (this issue is caused by baseband), in Carbon ROM, mobile data even got FCs. I've just backed to stock yesterday, wish I read this post earlier.
The mobile data issue can be fixed by replace the /system/etc/firmware folder, I replaced one from stock sony but got another issue with bluetooth, you can give a try with the firmware which is taken from this, test it and report.
Click to expand...
Click to collapse
Can confirm this bug. After toggling airplane mode on and off, mobile data is there.
Update:
Unpacked the system.img from rcstars MM and replaced the system/etc/firmware folder. Will test and report
Update2:
Booted up without problem, wifi and mobile data working. Will activate Wifi for now and test in some minutes if mobile data is working
Update3:
Turning of wifi after 1 hour. Instant switch to mobile data working fine. Now testing longer time
This is from VANIR Google+:
So i think more people are having problems with open gapps for example...
Mikey94 said:
Can confirm this bug. After toggling airplane mode on and off, mobile data is there.
Update:
Unpacked the system.img from rcstars MM and replaced the system/etc/firmware folder. Will test and report
Update2:
Booted up without problem, wifi and mobile data working. Will activate Wifi for now and test in some minutes if mobile data is working
Update3:
Turning of wifi after 1 hour. Instant switch to mobile data working fine. Now testing longer time [emoji14]
This is from VANIR Google+:
So i think more people are having problems with open gapps for example...
Click to expand...
Click to collapse
Have you tried to test Bluetooth?
Sent from my D6503 using Tapatalk
Oh Yeah...
Bluetooth function completely gone. Can't find any Bluetooth Device.