Database Users

[Q] HTC Desire 310 cannot Power on / charge after flashing stock rom using SPFlash

Hello to all XDA Family,
This is my first post here in XDA hope someone could help me reviving my Friend's HTC Desire 310. My friend asked me to repair her sister's bootloop HTC desire 310 uni sim. I searched a tutorial in XDA and downloaded the necessary files (Drivers, SP Flashtool & rom-Uni Sim). I followed the tutorial and finished flashing the stock rom. Unfortunately after flashing the rom the phone won't turn on or charge. I tried to reflashed it and got some error after the 100% yellow bar progress it gave me some errors.
*Below is the Scenario during and after flashing*
1- After flashing anything whatever it was the phone will get Hard Brick . Does it mean that Preloader or Bootloader "1st 2 data partations" is faulty.
2- Since Factory Mode is in Bootloader so you are not able to access it
3- since adb starts after bootloader phase so also u cant access it.
4- THANKFULLY i can get the phone into Preloader Mode by Removing Battery ===> connect usb ===> then hold Volume Down
5- In Preloader Mode the phone shutsdown in approxmatly 2-3 seconds getting SP Flash Tool Recognising it for 2 seconds and disconnect again after 2 seconds.
6- I can also get the phone into Preloader mode by Removing battery =====> connect USB =====> plug the battery back in. the phone will get into Preloader Mode for 2 seconds too but when i tried to flash the rom using SP Flash tool it give some error like (BROM ERROR: S_CHKSUM_ERROR) when the yellow progress bar reached 100%.
What can i do to revive the phone.? Please lend me your knowledge Thank you in advance.

Please help guys... thank you

Bricked A120 help ASAP!!!

So it all started when I did a firmware upgrade to wiko rainbow... The firmware upgrade was successful with spflash tool... I deattached my phone and the phone was working fine...After that I tried to install a custom recovery (philz touch)with spftools where the problem arrives.. So I tried to install it I clicked on download in spftool and when I connected my phone (turned off) I got some errors... I tried reconnecting my phone and after some trials.. The spftool download procedure started... Just after formatting I got an error.. my phone stopped getting detected by the PC I unplugged and tried to charge it but no led response for charging ... Phone is literally dead now, power button doesn't do ****! Is there any help or solution please help asap!!! (PC is not detecting my phone ???)

Have you tried Recovery Mode ?

Meizu m2 note bricked.

I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.

Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me

Can you speak more clearly?I don't understand.Because my English is not very good.

zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?

Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?

Thank you very much，This is my mobile phone. It's done.Thank you for your kindness.
：○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse

I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)

please guys my meizu m3 note screen black help mee

hello .. my probleme is when i update the latest frimeware 6.7.28 ( nougat ) beta i have 'L' modele , and i root my device so i update from the phone i download it and update it after reboot upgrading and say upade or clear data i clicke update and reboot every thing gone black screen and some sruch no logo flyme only black screen and some scruch word ;; i download frimeware and sp tools when i plug cable and download nothing happen plz any help guys

any one helip ?

dz123 said:
any one helip ?
Click to expand...
Click to collapse
if you have L version and you install the M rom on it than you have a black screen like my phone.
if you have black screen try that link worked for my L681
https://forum.xda-developers.com/an...-t3682743/post74012914?nocache=1#post74012914
if it doesnt work:
+ first of all before you start these drivers must be installed correctly sometimes window make mass with them)
MediaTek USB Port
MediaTek Preloader USB VCOM (Android)
MediaTek DA USB VCOM (Android)
Maybe you need to use usb driver uninstaller than reinstall the drivers
+ than try the all steps again and again.
if it doesnt flash keep pressing three side buttons ( v+, v-, pwr) at the same time and hold it untill it restarts (usb cable was pluged.). it flashed. than i succeed.

please help.

My lenovo k4 note totally dead after after a few days installing RR 5.8.5 and Zero addition kernel,charging in the night and in the morning i find my device is dead can't boot ,no bootloader,no recovery ,not even vibrate,can' t connect to pc when i' m trying to use SP flash tool to recover it,can' detect by flash tool ,i was trying every preloader Driver i was found in xda or another site,
Please anyone i need your experience to bring my device up @mohancm i really apreciate if you can drop some word here,please,

glewo45 said:
My lenovo k4 note totally dead after after a few days installing RR 5.8.5 and Zero addition kernel,charging in the night and in the morning i find my device is dead can't boot ,no bootloader,no recovery ,not even vibrate,can' t connect to pc when i' m trying to use SP flash tool to recover it,can' detect by flash tool ,i was trying every preloader Driver i was found in xda or another site,
Please anyone i need your experience to bring my device up @mohancm i really apreciate if you can drop some word here,please,
Click to expand...
Click to collapse
i think your mobile is bricked.... download sp flash tool and stock rom....load scatter file then click on download button then connect your phone with a data cable if flash tool do not recognise your phone then press volume up key...and flashing will start...hope this will work