Greetings to all forum users .
I apologize for my bad English .
I am the owner of the N9006 .
I have two problem.
1) If I insert the headphone jack , you only hear one side , and if you do not push it all the way down you will hear from both sides. Can you give me some possible solution before taking it in for service ?
2) But in fact I am writing to another much more serious issue .
I have big problems with bluetooth connection between the terminal and the renault Radiosat ( issue already addressed and never resolved in several forums , including foreigners ) . We omit all the tests , studies and readings of pounds of post . However, I believe to have found the problem.
Given that as I do the first pairing - phone carkit everything works (except the contact management) . And it works if I do not bluettoth off the phone , in the sense that if I leave the car and after we return, the paring is automatic.
The pains begin if I turn off the bluetooth on the phone.
If reactivated , do not connect more and I have to redo the whole procedua pairing .
With total disbelief , I discovered that whenever deactivated and reactivated the phone bluetooth , changes its mac addres .
But the mac adress is not fixed, because it depends on the vendor and the hardware ?
How is this possible? How can I change it and make it permanent ?
This explains why not connect a second time. The machine reads a different mac adress ......
Related
I have I-mate , and updated to ver 1.52 , i try to connect it with the BMW car bluetooth , they can see each other but the car can not bound the i-mate , any body try this , or is there a patch tor that.
any help
I'd like to...if anyone has a BMW 520i to donate i'll be willing to have a go!!
Sorry i couldn't be more helpful....i just couldn't resist.
Yes There is a solution Ali!!
First backup your device
Goto www.clubimate.com
Register Your device
Then you would head to the support section
And download the latest ROM upgrade which is approximately 40 MB
Upgrade your device since the new ROM is said to have a new fix for bluetooth.
And if this works ........ Please Donate !! (Just kidding !!)
if i am not mistaken, the bmw carkit is the same as the parrot ck3000...if so you have a problem (for the moment anyway)
the parrot ck3000 works with the handsfree profile of a bluetooth phone, and the xda2,qtek2020,i-mate and all the other names for our machine only works the headset-profile....it is no use of trying to upgrade the carkit, mine has the latest software, and still does not work...the upgrade has to come from your pda, that has to support the handsfree profile...as i heard, there should be one comming out in the first few months...let's hope...
thanks for the help
i update the i-mate before from the clubimate but as you said no help at all it is the same problem
if problem solved will donate sample bmw logo from the company
To ali:
Simply: NO WAY. Nor will BMW support you in any way: You will not get (in written) even the list of supported phones. They just claim it's lack of Bluetooth standardization (Wich is not completly false...).
BTW, I've found the hard way that BMW cars only support Handsfree profile (No headset), BUT, not on every phone model, and not all features....
If you are interested:
1- Ericsson and Sony-Ericsson T68 models: They work on the handsfree part of the Bonding, but you will not get your phone contact list automatically passed onto the car kit phone system. You may pass contacts one at a time (tedious and time consumming).
2- SE P800: My biggest disappointement, they do not even pair reliably, no contact list at all, connection breaks with no apparent reason.
3- Siemens S-55: The BMW preferred one (Both Germans, I guess....), to no avail. Same behaviour as SE T68, and although the contact list is supposed to be passed automatically it doesn't. When tried manually, it stops at about 6 or 7 contacts and the phone hangs.
4- XDAII: The BT part is SO POORLY implemented, it should have been even removed from the reviews on the forums.
PROFS OF THE XDA-WORLD, PLEASE HEEEEEEEEEEEEEEEEELP!
i have my htc tytn since 2 weeks. i connected my Samsung WEP-150 bluetooth headset (worked previously with Samsung tels, and qtek 9100). Now the issue is: after hard reset the headset works properly: push-beep-i say the name-he says the name and calls. And this is the last time it works until the next hard reset. The issu comes up with Nokia BH-200 headset too. The unit opens the audio gateway (can hear the noice), but closes it immediately, so i cant hear the beep, and say the name into the headset. If the unit is in my pocket, i cant say the name loud enough!
What i allready tried:
-upgrade to ext 106
-upgrade to jasjam 1.20...
-and with the original (ext 105) firmware the bttoggle prog.
The bttoggle (i red about it here) is a funny prog. Everybody wants to listen music on his unit, but i just wanted to use as designed. If i run the bttoggle 2 times (first is audio gateway on, second switches back to voice speed dial), the stuff works till the next softreset (or sometimes it loses the setup in suspend mode too).
Anyway, i think this is not good so.
PLESE HELP ME!!!
thx
peterke
PS: one more question: why is a com port in the headset profile there? is it useful? the dealer told me to switch it of, and only use the handsfree port.
sorry bout ur head set
I bought the same one that was already used but i cant activate it cuz i dont have the code,are they all the same code?were can i get the code to activate it ,do you know?i would appreciate the help if you have it!I know you said it sucks but i would still like to try it!
Firstly, I love this phone, it almost does exactly what I want, Ok Windows Mobile 6.x would be good but I can without that, what I can't live with is the Bluetooth problem I have.
My device will not connect to the integrated bluetooth within my Skoda Octavia - it pairs up OK, but won't transfer the phonebook, and then after 5-10mins the connection is dropped! While it's connect it'll receive calls OK. The BT in the car is identified as SKODA_UHV, which I understand is the same of other VAG (Volkswagen Audi Group) cars, albeit with a different name.
It's been back to HP three times, the last time it came back with different BT version software installed, but that hasn't helped.
The car works fine with my old Nokia phone (and the HTC S710), the BT kit installed is the latest Skoda version....
Beer tokens await anyone who can provide a fix.....
do you see "hand free" on this connection? more things iI can think of is that lots of problems are due to lack of memory (device not card) pleas look at other thread on this issue it dose happen with new users ,one more thing is that you can set the connection to be not scure go over the settings
Yes the icon appears - everything is fine and works well for around 10mins, the the connection is broken.
The same happens if the unit is cold booted (thus ensuring maximum memory) and regardless of the security settings.
look for "ms-bt-stock" on xda ,you can also use google like "xda ms-bt..." see if one f the cabs will do the trick but from that day on you will not have your current bt screen (you can uninstall orHR) backup your device before installing so you can hr and restore ,good luck
Hy
Im a litle bit frustated , trying to pair a HCB-120 car kit.
First time I did worked as all manuals explain detailled , but , I got an error after introducing password, I didnĀ“t pay much atention because devide worked as expected .
Problem begins when I delete configuration on BT and try to pair it again .
Never work again last step , pasword intro never apears , looks like device link properly , but after a few seconds car kit goes out .
I have tryed to change my phone name to force it to a new pair process , but all is the same .
Any help ?
THx
Soft reset your x1 before you start.
On your X1 turn on bluetooth and make sure it is set to visible.
Set up your bluetooth device so that it can be found (put it in pairing mode).
Use your x1 to set up a new pairing - enter password if needed.
After your device has been paired with your x1, check to see that your x1 will automatically connect when in range (not sure what the settings are at the moment).
Once a pairing has been set up it shouldn't need to be changed.
Thx but after following instructions I get same resolts.
I will try with a fresh rom
Hello everyone,
Two months ago, i bought a p8 lite on an online website. Problem when it arrived : the version was the C02B140 (Android 5.0), and sadly, MMS and bluetooth were disfunctionning.. But I saw that i could install the firmware ALE-L21_C432B551_Single SIM (Android 6.0 thanks to a tuto on a site i can't find anymore unfortunately).
It succeeded, and I was happy with it (bluetooth and MMS working !). BUT a few days ago, the bluetooth started doing weird stuff.
Soo, I have two bluetooth devices, a wooly hat/headphone (really cool btw), and a more classic Phillips Headphone. Here is the only link i found for the hat/headphone (just delete the space after www) : www .drezzup.fr/echarpes/bonobo/coffret-no-l-homme-bonnet-bluetooth-gris-synthetique-homme-taille-tu-bonobo-art2303118.html
With the Philips Headphone, there are abolutely no problems, i can listen to music with it for literaly hours without a cut on the audio stream.
But with the other one, i can only listen to music with it for like two minutes. After that, the bluetooth turns off, then returns on, and reconnect (or not sometimes). You'll understand it's quite annoying, isn't it ? I red many topics with the problems of on/off but it did not fix my stuff. The only thing i haven't done yet is to reset my phone, but if I do that, i'll be back to the first problems (unless you can recommend another version to upgrade ?).
So, my questions are : Is it a problem with the balong thing ? Or with the hardware (less likely i guess, cause it works with my philips headset) ?
Should I reset with Android 5.0 ?
I asked on French forums (oh yes i'm very baguette and omelette du fromage), but no answers, sadly.
Thanks a lot for your future help, hope we'll get a fix !
Eminar
So, after all, I managed to fix my issues, by downgrading my system, then re-upgrading it, guided by this really cool tuto (without space after www):
www .gsmdude.com/threads/huawei-p8-lite-ale-l21-balongc52b311-solution-and-upgrade-to-marshmallow.7422/
Hoping this will work more than a few days !