Database Users

USB device Not Recognized

Whenever i plug in my i9000, it just pop up an error msg ÜSB Device not recognized. I'm trying to get Kies to recognize my i9000
I tried following this but it doesnt work at all.

it worked for me on kies, but i didn;t like it anyways
What i did was go to settings --> about phone --> usb settings
and try the other options (i'm using media player option, not sure why mass storage doesn't work)

Did you try to change the usb ports on your pc (stick the cable into different usb ports)?
Sent from my HTC Desire using Tapatalk

OrbNRG said:
it worked for me on kies, but i didn;t like it anyways
What i did was go to settings --> about phone --> usb settings
and try the other options (i'm using media player option, not sure why mass storage doesn't work)
Click to expand...
Click to collapse
yeah only the media player option was available to me as well.

Mikulec said:
Did you try to change the usb ports on your pc (stick the cable into different usb ports)?
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
changing the usb port does help, however when i unplug it and restart my com, it does not recognize it anymore

What OS are u running?

Could also have something to do with the number of irq's on your motherboard.
PC's older then aprox. 3/4 years have less irq's and can have trouble with much external devices

keevy17 said:
Whenever i plug in my i9000, it just pop up an error msg ÜSB Device not recognized. I'm trying to get Kies to recognize my i9000
I tried following this but it doesnt work at all.
Click to expand...
Click to collapse
Have a look at this site from HardwareZone.com.
It's heavily populated but you only need to read the last five or so pages.

Beards said:
Have a look at this site from HardwareZone.com.
It's heavily populated but you only need to read the last five or so pages.
Click to expand...
Click to collapse
yeah i am looking at that thread too, however thanks for the link here, good for documentation as well, appreciated

keevy17, u have the phone already? If yes, you could help us resolve our questions in last pages of this thread:http://forum.xda-developers.com/showthread.php?t=694835&page=9
Q: Are there any notifications (on screen, backlight of buttons, ...) about missed calls, new mails, sms? Is there any notification when u charge the battery and the battery is fully charged?
Thanks in advance.

The default USB connection is to activate Samsung Kies. You'll have to go to settings->About Phone->USB Settings to change. If it doesn't work after changing, soft reset the phone and try again.
Caused me a bit of head scratching until I went through the options.

Now am having same problem, can'r see mass storage in my computer.

I think I read you need to enable USB Debugging then it will work. for both of you I believe.

With USB debug i can only use adb, nothing works. If i disable debug i can copy files via MTP protocol but mass storage doesn't work.
Edit.
Found the problem, it doesn't mount it self like Desire/N1 i had mount it my self. All working.

hassan said:
With USB debug i can only use adb, nothing works. If i disable debug i can copy files via MTP protocol but mass storage doesn't work.
Edit.
Found the problem, it doesn't mount it self like Desire/N1 i had mount it my self. All working.
Click to expand...
Click to collapse
hassan,
I've not yet had a chance to use the phone yet. Can you tell me how you mount the USB in order to use it with a PC?

Beards said:
hassan,
I've not yet had a chance to use the phone yet. Can you tell me how you mount the USB in order to use it with a PC?
Click to expand...
Click to collapse
It was bit tricky to start with as i thought my phone is broke. First go to setting > About > USB Settings > and select Ask on connection. Plug the cable in to the and from drop down notification bar and hit USB connected then you get the option to mount the mass storage.

hassan said:
It was bit tricky to start with as i thought my phone is broke. First go to setting > About > USB Settings > and select Ask on connection. Plug the cable in to the and from drop down notification bar and hit USB connected then you get the option to mount the mass storage.
Click to expand...
Click to collapse
Thanks hassan, I'll try it later.

If you want kies to work with the phone, dont kill MTP.. But kies is acting weird, soemtimes it doesnt see the phone, but after unplug and replug it works again.. I've given up on kies actually, over 100MB to download and worst than some beta software i've used.
also, i cannot get samsung apps to work on kies, it just error or timeout.. you guys hv any luck?

I haven't tried kies yet, i'll try when i get home from work.

Anybody know how to mount on a Mac? I tried changing the USB settings to Mount/Media, no luck. Any help would be appreciated.

[Q] how to enable MTP on CM10?

seems much faster SD card writing speed via MTP then USB mass storage, but everytime when I connect to PC, it is forced to use USB mode. appreciate if anyone can help.

Marmite kernel have MTP function. May be you can try it out.
Sent from my Galaxy Nexus using Tapatalk 2

deani77 said:
Marmite kernel have MTP function. May be you can try it out.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
is there any other way no need to flash kernel?

You must first enable MTP on your phone to see if the stock CM kernel already supports it. You can go to settings > Storage and tap on the capacitive menu button (Second from the left). If you see USB Computer Connection or USB settings, tab on it.Now you must select Media Device (MTP) instead of mass storage device at this point. Then you connect to your computer. If the phone is now detected as a media device, you would know that MTP support is built in. If not, then you must flash marmite to get MTP to work.

Even though they have the option in their storage settings, I don't think their stock kernel supports mtp.
If you try my kernel for cm, you will not be disappointed.

Defy+ No USB connection

Hi everyone,
My phone isn't showing up as USB device when connected to computer. I have tried installing latest CM 10 quarx's ROM but no success (I transferred new ROM through wifi - Dropspot app). Could this be a hardware problem or something else?
I have already tried using a different cable and restarted my phone(many times) and computer (once).
Any help will be appreciated!

Please helps. I have even tried with CM10 05.12.12 build(I am sure usb mount was working with this build) but no change.

lief.erl said:
Please helps. I have even tried with CM10 05.12.12 build(I am sure usb mount was working with this build) but no change.
Click to expand...
Click to collapse
I too faced a similar problem,. try connecting to different computer to check., IF its working in other computers.,
Then remove all mobile related drivers from Windows Device manager(Show hidden devices).,
The problem would be solved

[APP] USB Mass Storage for Ice Cream Sandwich & Jelly Bean
This app works for me when i was having this problem. Also try re-installing drivers. :fingers-crossed:

Thanks everyone for replying but I have already tried what you guys have suggested. Still looking for a solution..

N4 not recognize by PC

I know it's a really common and simple problem but I google it several time and I can't figure out how to solve this.
When I plug the device onto the PC it begin to charge, but I can't browse the folder inside the N4 cause it's not seen by the PC itself.
the N4 has stock rom android 4.3 with stock kernel, unlocked bootloader and root permission.
I tried to:
-use different cables
-use different usb ports (2.0-3-0)
-enable USB debugging
-install MTP driver from microsoft site
-install ADB driver from google nexus toolkit
-put it in PTP mode
-install other driver suggested by another toolkit
when I was on 4.2.2 all worked fine, but since I installed CM 10.1 and android 4.3 I can't see the folder such as music or download.
Someone can help me? this thing is really annoying

Lamerlengo said:
I know it's a really common and simple problem but I google it several time and I can't figure out how to solve this.
When I plug the device onto the PC it begin to charge, but I can't browse the folder inside the N4 cause it's not seen by the PC itself.
the N4 has stock rom android 4.3 with stock kernel, unlocked bootloader and root permission.
I tried to:
-use different cables
-use different usb ports (2.0-3-0)
-enable USB debugging
-install MTP driver from microsoft site
-install ADB driver from google nexus toolkit
-put it in PTP mode
-install other driver suggested by another toolkit
when I was on 4.2.2 all worked fine, but since I installed CM 10.1 and android 4.3 I can't see the folder such as music or download.
Someone can help me? this thing is really annoying
Click to expand...
Click to collapse
Do you use a pin on your lock screen?
I'm on Carbon nightly and use a pin and have to unlock my screen to get access through PC

mrhiab said:
Do you use a pin on your lock screen?
I'm on Carbon nightly and use a pin and have to unlock my screen to get access through PC
Click to expand...
Click to collapse
no pin neither other methods, just the standard slide

Lamerlengo said:
I know it's a really common and simple problem but I google it several time and I can't figure out how to solve this.
When I plug the device onto the PC it begin to charge, but I can't browse the folder inside the N4 cause it's not seen by the PC itself.
the N4 has stock rom android 4.3 with stock kernel, unlocked bootloader and root permission.
I tried to:
-use different cables
-use different usb ports (2.0-3-0)
-enable USB debugging
-install MTP driver from microsoft site
-install ADB driver from google nexus toolkit
-put it in PTP mode
-install other driver suggested by another toolkit
when I was on 4.2.2 all worked fine, but since I installed CM 10.1 and android 4.3 I can't see the folder such as music or download.
Someone can help me? this thing is really annoying
Click to expand...
Click to collapse
Is the partition marked as active within windows? start > run > diskmgmt.msc

Timboe73 said:
Is the partition marked as active within windows? start > run > diskmgmt.msc
Click to expand...
Click to collapse
nope, can't see the phone there

up

I'm having the same issue here and can't get my device to be recognized by various computers. This was after flashing CM 10.2 (Android 4.3) and the problem still persists in CM 11.0 (Android 4.4).
Prior to that the device connected normally as it showed up on device manager and my PC making the USB connect sound.
Is this potentially hardware problem as well?
Thanks in advance.

Try Usb Debugging + P2P and lmk

gt-kingz said:
Try Usb Debugging + P2P and lmk
Click to expand...
Click to collapse
Hi gt-kingz, I tried that and it won't work. Do I try wiping my system and then re-installing CM 11.0 or Android 4.4?

dmatthew said:
Hi gt-kingz, I tried that and it won't work. Do I try wiping my system and then re-installing CM 11.0 or Android 4.4?
Click to expand...
Click to collapse
It won't fix it. I have the same problem since I installed 4.4 (tried many different roms). Usb Debugging + p2p is the only working solution for me.
I tested on Xp/7/8 even with different drivers. But well, I would just use Airdroid.

I have the same problem!
Sent from my Nexus 4 using xda app-developers app

Try different USB wire. If the problem persist; uninstall and reinstall N4 drivers.
Sent from my Nexus 4 using Tapatalk

badboy47 said:
Try different USB wire. If the problem persist; uninstall and reinstall N4 drivers.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Hi badboy47, have tried different USB wires and even different computers. With regards to the N4 drivers, I can't even see the device in device manager when plugged into my PC. Or did you mean uninstalling the universal ADB drivers?
Thanks!

Official rom important bug

I've installed official room using OSTLA, before i install my nokia6 ta1000 can connect pc such as MTP or midi or just charging, after successfully flashed and update till now in oct update no pop up when i connect to pc my nokia 6 just charging, no pop up mtp or midi or charge just charging like using adapter, does anyone feeling too? Or just me, and i need someone to fix this ps: this happen from the first flashed on jully update till oct update, i've been using much cable and reinstall windows the problem still, *sorry for bad english

And i cant connect otg fdd, please help did my usb conmector broken or this rom kernel problem? Before october update in september update my otg is normal, but my charging still normal and i can go into recovery using micro sd from charger with up volume and power button

have u enable USB debugging on Developer Option ??

hawwin88 said:
have u enable USB debugging on Developer Option ??
Click to expand...
Click to collapse
i enabled but nothing changed, do your nokia 6 TA-1000 normal when connecting to pc such as MTP mode? And can you try to using otg on nokia 6 october update?

forward12315 said:
i enabled but nothing changed, do your nokia 6 TA-1000 normal when connecting to pc such as MTP mode? And can you try to using otg on nokia 6 october update?
Click to expand...
Click to collapse
my nokia 6 TA-1000 work as normally bro, MTP mode work fine and OTG work fine too, maybe u can try this :
1. change your cable data or try on another PC
2. install app named "es explorer" on play store to OTG mode
3. install adb driver on your PC
good luck

hawwin88 said:
my nokia 6 TA-1000 work as normally bro, MTP mode work fine and OTG work fine too, maybe u can try this :
1. change your cable data or try on another PC
2. install app named "es explorer" on play store to OTG mode
3. install adb driver on your PC
good luck
Click to expand...
Click to collapse
It doesnt help..., do your nokia 6 ta 1000 on october update?

Up

forward12315 said:
I've installed official room using OSTLA, before i install my nokia6 ta1000 can connect pc such as MTP or midi or just charging, after successfully flashed and update till now in oct update no pop up when i connect to pc my nokia 6 just charging, no pop up mtp or midi or charge just charging like using adapter, does anyone feeling too? Or just me, and i need someone to fix this ps: this happen from the first flashed on jully update till oct update, i've been using much cable and reinstall windows the problem still, *sorry for bad english
Click to expand...
Click to collapse
huh? That's strange..Have tried installing the drivers? (Which pops up when you plug your phone to the pc)

DinethIrusha said:
huh? That's strange..Have tried installing the drivers? (Which pops up when you plug your phone to the pc)
Click to expand...
Click to collapse
No driver installing in pc when pluged, no pops up in my phone, my phone just charging, otg not function too, did my usb connector broken?

Hey,
Goto
Developer Option > Select USB Configuration > set it MTP
then try plugging it on your PC
(To turn Developer Options goto Settings>About and keep touching the Build Number for 5 times)
Settings > Developer Options..
I included the Screenshots below

DinethIrusha said:
Hey,
Goto
Developer Option > Select USB Configuration > set it MTP
then try plugging it on your PC
(To turn Developer Options goto Settings>About and keep touching the Build Number for 5 times)
Settings > Developer Options..
I included the Screenshots below
Click to expand...
Click to collapse
After flashed rom using ostla developer option setted on automatic with mtp mode(no need press build number), when i plugged on pc just charging and when i set to mtp and charging again no changes, and why my otg doesnt work but at early update otg working and now in november update still not working, i think its usb connector problem but i dont know is usb connector same machine with pc connection and otg or just on power management?