Was on Boost, Sprint says they can't use it now... - EVO 4G General

Hi everyone....
I bought my phone from a reseller (NEW) a few years back and this phone was rooted and unlocked to run on Boost Mobile.
I recently re-flashed the stock ROM back on it and factory reset the phone, and gave it to a friend who wants to run on Sprint.
He took it to the Sprint store and they said it is "locked to Boost Mobile" and they cannot use it??!?
I'm really confused as it is "unlocked", which means I should be able to run on any supported (same technology) carrier.
What do I need to do to be able to use this on Sprint's network once again?

Most likely what happened is the MEID was changed from it's original to one from Boost Mobile.
You could verify this theory by comparing the MEID the phone states under
settings > system info > MEID
*or something similar*
To the one under the battery in the compartment.
If this is your situation the MEID needs to be reverted back to the original.

Related

Sprint Mogul to verizon wireless

a friend recently purchased a sprint branded mogul and has attempted to hax verizons settings onto it, but it aint working.
anyone got some working instructions on how to do this? i know its possible, but i can't find anything on it.
First if verizon won't accept the esn or add it to there system then give up because it isn't going to happen.
oh how i love cdma, but still thats not the problem.
its still using sprints radio and whatnot even after flashing it=
The radio has no bearing on the problem. Just install a custom rom with verizon carrier cab or install verizon rom. Also update to a current verizon prl. And change you epst settings. It would help if you had another verizon phone to copy the settings from.
FWIW, Upper "management" from my current (small) carrier told me that Verizon was now accepting devices that were not originally sold by Verizon. I drove two hours to a corporate Verizon store to discuss activating a device (provided by my carrier, long story) and was told by the corporate Verizon tech no how, no way!
You chances of getting one activated are slim. You have to find the right tech to add the esn to there dmd.

[Q] Please Help Flash My Stolen Phone Back to Verizon

My HTC Touch Pro was stolen on campus. Long story short I got my phone back but the thief flashed it to another carrier. I know very little about cell phone modification but would like to flash it back to Page Plus ( Verizon ) so I can use it again. Page Plus tech support won't help me but their Tech did have me pull up my ESN. Turns out the thief changed my ESN as well. Presumably to avoid being traced using my phone. The Page Plus Tech said a hard reset won't restore my phone to factory settings. Is that correct? I can't afford a new phone. I would be very grateful if some one could tell me exactly how to flash my phone back to Page Plus / Verizon and change my ESN back to the original one. I had Windows Mobile 6.1. It would be great if I could upgrade to 6.5 in this process. If not, that's ok 6.1 is fine.
Thanks
Jim

used galaxy s4 won't activate

okay so i got the used galaxy s4 sprint from somebody, and it won't activate.
esn came up clean, but they said it won't activate due to some reason.
it' snot like someone is activated on that phone.
but the sprint told me that there is one weird thing he found.
when i go to about device > status > network says "samsung" not sprint
It might be an unlocked version. and i have no idea what that mean.
because sprint don have unlocked phone.
help me someone
I see that your phone number isn't programmed into the my number field and your MIN number isn't assigned either. I'm not on 3g at the moment so I don't know if the evdo rev a mode is the same mode as Sprint. Looks like you have a sim card in it because it's setting a tower. The phone's serial number needs to be programmed to your account and update the profile and prl and possibly needs the provisioning to be updated. A real Sprint employee could tell you what needs to be done correctly. I don't think unlocked phones, per se, run on evdo. That's odd that they can't give you a definite answer why they can't activate it. Take it to a different Sprint store.
Did you try doing a ##786# reset?
The phone might have been used on a prepaid service and was flashed.
Try a factory reset if it still won't activate take it to a sprint store.
Sent from my SPH-L720 using xda premium
2 things:
1) Flash the one click restore for Sprint and see if that fixes the carrier name.
2) If #1 doesn't fix the activation can you provide the error message?
Also, make sure the MEID matches between screen and back of the phone (behind battery).
If that doesn't that could also explain things.
I'm having the exact same problem. I was going to flash the phone to boost because sprint wouldn't activate, but I can't update the profile or prl. It when I try it just seems to activate hands free activation which fails.
How to get read of activation not completed message process? Due to such a kind advice on this board I got the phone to work with GSM and do not need Sprint service on it. Thanks
and nsnuyc
I would do what garwynn said double check the MEID inside the settings versus the tag located under the battery. Also confirm that the phone wasnt blacklisted after you purchased it. I have seen shady deals where you buy a clean esn phone as soon as you walk away with it the person calls Sprint on the spot and reports it lost/stolen. Where did you verify the MEID was clear directly through Sprint CS or a third party website like swappa or checkesnfree?

[Q] (Unlocked) AT&T Samsung Galaxy S4 SGH i337 gives MM#6 error for MetroPCS SIM Card

[Q] (Unlocked) AT&T Samsung Galaxy S4 SGH i337 gives MM#6 error for MetroPCS SIM Card
Hello everyone. I feel that I have a rather unique issue here.
My sister recently bought an AT&T GS4 from eBay to use here under a MetroPCS service. I took it to a local phone shop in order to have it unlocked. I am not a noob when it comes to rooting/unlocking/ROMing/etc. since I've done so and experimented with my Verizon HTC Rezound. Since I've nearly bricked my Rezound three times, I decided that I should leave it to someone more experienced.
I took it in, within 2hrs the guy had the phone unlocked for me. He put in a Simple Mobile SIM card, I called my own phone and it worked. I take it to Metro PCS to have my sisters current line transferred to a SIM card to use the GS4 with. The problem is that whenever the SIM card is put into the phone and turned on, it says Phone not allowed (MM#6). I then proceeded to look up the IMEI to see if its blacklisted. I checked online and it said that it was clean. I also went to a corporate AT&T store to have them check if it is indeed blacklisted and they said that it is clean. While at the store, I decided to look through the phone for anything unusual. After checking the Status of the phone, I find that the IMEI value is 0. I then hit the *#06# menu and get a popup which says IMEI 0/04. I let the Sales Rep know and ask him if that could be an issue and he said that whoever I took it to might have messed up with the root and that there's nothing they can do since I don't have service with them.
I thought that maybe the phone wasn't connecting to the network because it wasn't set on the GSM radio so I used the *#*#4636#*#* menu but yet nothing happens. I added the APN values for T-Mobile (works for MetroPCS) and still no luck. I even tried factory resetting the phone but whenever I add the SIM card, I keep getting the same popup. In the Service Menu (*#0011#>>Back>>Key Input: 1) UMTS Main Menu, I hit [2] Version Info >> [1] SW Version >> [1] Read IMEI >> and it says "IMEI NOT ACTIVE."
I started looking around the net to see if I can restore and/or repair the phone and I've seen YouTube videos of people unlocking the code by using the Service Menu. Currently, I'm looking around the XDA Forums to see if there is anything I can try out. I'd appreciate the help. I do not want to install any ROMs on my sister's phone unless I absolutely have to. If anything, at the moment I'm trying to flash back to stock. Does anybody know anything about this issue? Also, if I am posting in the wrong area, I apologize for the inconvenience.
You need to put the original imei back to your phone, because the guy unlock the phone for you he messed up with your phone 's imei that why after unlock the phone shows zero imei
Sent from my iPhone using Tapatalk
shock_and_awe said:
Hello everyone. I feel that I have a rather unique issue here.
My sister recently bought an AT&T GS4 from eBay to use here under a MetroPCS service. I took it to a local phone shop in order to have it unlocked. I am not a noob when it comes to rooting/unlocking/ROMing/etc. since I've done so and experimented with my Verizon HTC Rezound. Since I've nearly bricked my Rezound three times, I decided that I should leave it to someone more experienced.
I took it in, within 2hrs the guy had the phone unlocked for me. He put in a Simple Mobile SIM card, I called my own phone and it worked. I take it to Metro PCS to have my sisters current line transferred to a SIM card to use the GS4 with. The problem is that whenever the SIM card is put into the phone and turned on, it says Phone not allowed (MM#6). I then proceeded to look up the IMEI to see if its blacklisted. I checked online and it said that it was clean. I also went to a corporate AT&T store to have them check if it is indeed blacklisted and they said that it is clean. While at the store, I decided to look through the phone for anything unusual. After checking the Status of the phone, I find that the IMEI value is 0. I then hit the *#06# menu and get a popup which says IMEI 0/04. I let the Sales Rep know and ask him if that could be an issue and he said that whoever I took it to might have messed up with the root and that there's nothing they can do since I don't have service with them.
I thought that maybe the phone wasn't connecting to the network because it wasn't set on the GSM radio so I used the *#*#4636#*#* menu but yet nothing happens. I added the APN values for T-Mobile (works for MetroPCS) and still no luck. I even tried factory resetting the phone but whenever I add the SIM card, I keep getting the same popup. In the Service Menu (*#0011#>>Back>>Key Input: 1) UMTS Main Menu, I hit [2] Version Info >> [1] SW Version >> [1] Read IMEI >> and it says "IMEI NOT ACTIVE."
I started looking around the net to see if I can restore and/or repair the phone and I've seen YouTube videos of people unlocking the code by using the Service Menu. Currently, I'm looking around the XDA Forums to see if there is anything I can try out. I'd appreciate the help. I do not want to install any ROMs on my sister's phone unless I absolutely have to. If anything, at the moment I'm trying to flash back to stock. Does anybody know anything about this issue? Also, if I am posting in the wrong area, I apologize for the inconvenience.
Click to expand...
Click to collapse
You're not alone on this one. I bought an AT&T S3 and having the exact same issue as you are. Here's my story...LOL. I met with a gentleman at the local AT&T store. We checked the IMEI, verified it was in good standing. Since he's the original owner, I purchased the phone from him. I use my MetroPCS SIM, and I get the same "MM#6" code you described. I'm very familiar with using AT&T phones on MetroPCS. I have transferred two NOTE 2s and an S4 to Metro accounts with no issues at all. BTW...the IMEI is still in good standing & when I insert a MetroPCS SIM, the IME still shows in the AT&T S3.
My Phone specs: Samsung Galaxy S3
Carrier: AT&T
Version: Android 4.3
What I've tried:
Downgrade to 4.1.1 (Unfortunatley, bootloader can not be downgraded)
There's two things I can think of...The Android version has something to do with it. Or...I've found out that my S3 was used overseas. And since your phone was from Ebay, theres no telling how the phone was used.
My next step is to purchase a clean SIM card from MetroPCS and have transferred to my account. I'll keep you posted on my findings. For now, I'd go to AT&T store and use their SIM and see if your IMEI comes back. Or downgrade the phone if possible and start from the bottom and work your way up.
---------- Post added at 02:43 PM ---------- Previous post was at 02:02 PM ----------
shock_and_awe said:
Hello everyone. I feel that I have a rather unique issue here.
My sister recently bought an AT&T GS4 from eBay to use here under a MetroPCS service. I took it to a local phone shop in order to have it unlocked. I am not a noob when it comes to rooting/unlocking/ROMing/etc. since I've done so and experimented with my Verizon HTC Rezound. Since I've nearly bricked my Rezound three times, I decided that I should leave it to someone more experienced.
I took it in, within 2hrs the guy had the phone unlocked for me. He put in a Simple Mobile SIM card, I called my own phone and it worked. I take it to Metro PCS to have my sisters current line transferred to a SIM card to use the GS4 with. The problem is that whenever the SIM card is put into the phone and turned on, it says Phone not allowed (MM#6). I then proceeded to look up the IMEI to see if its blacklisted. I checked online and it said that it was clean. I also went to a corporate AT&T store to have them check if it is indeed blacklisted and they said that it is clean. While at the store, I decided to look through the phone for anything unusual. After checking the Status of the phone, I find that the IMEI value is 0. I then hit the *#06# menu and get a popup which says IMEI 0/04. I let the Sales Rep know and ask him if that could be an issue and he said that whoever I took it to might have messed up with the root and that there's nothing they can do since I don't have service with them.
I thought that maybe the phone wasn't connecting to the network because it wasn't set on the GSM radio so I used the *#*#4636#*#* menu but yet nothing happens. I added the APN values for T-Mobile (works for MetroPCS) and still no luck. I even tried factory resetting the phone but whenever I add the SIM card, I keep getting the same popup. In the Service Menu (*#0011#>>Back>>Key Input: 1) UMTS Main Menu, I hit [2] Version Info >> [1] SW Version >> [1] Read IMEI >> and it says "IMEI NOT ACTIVE."
I started looking around the net to see if I can restore and/or repair the phone and I've seen YouTube videos of people unlocking the code by using the Service Menu. Currently, I'm looking around the XDA Forums to see if there is anything I can try out. I'd appreciate the help. I do not want to install any ROMs on my sister's phone unless I absolutely have to. If anything, at the moment I'm trying to flash back to stock. Does anybody know anything about this issue? Also, if I am posting in the wrong area, I apologize for the inconvenience.
Click to expand...
Click to collapse
Heres my update. MetroPCS SIM card is "married" to each IMEI/PHONE. My phone in question (the ATT S3) was not correctly associated with my account. I called MetroPCS customer service (1-888-8METRO8) gave them the ATT S3 IMEI and the SIM number. within 10 minutes, the ATT S3 was up and running. I hope it helps.
Please provide feedback.
I had a similar issue with MM#6
I called MetroPCS - informed them I was receiving MM#6 error and asked them to 'activate' my phone.
Gave them my IMEI and within a few minutes, I was golden!
WORKED
Thank you for your update worked perfect...:d:d:d
clenceo said:
you're not alone on this one. I bought an at&t s3 and having the exact same issue as you are. Here's my story...lol. I met with a gentleman at the local at&t store. We checked the imei, verified it was in good standing. Since he's the original owner, i purchased the phone from him. I use my metropcs sim, and i get the same "mm#6" code you described. I'm very familiar with using at&t phones on metropcs. I have transferred two note 2s and an s4 to metro accounts with no issues at all. Btw...the imei is still in good standing & when i insert a metropcs sim, the ime still shows in the at&t s3.
My phone specs: Samsung galaxy s3
carrier: At&t
version: Android 4.3
what i've tried:
Downgrade to 4.1.1 (unfortunatley, bootloader can not be downgraded)
there's two things i can think of...the android version has something to do with it. Or...i've found out that my s3 was used overseas. And since your phone was from ebay, theres no telling how the phone was used.
My next step is to purchase a clean sim card from metropcs and have transferred to my account. I'll keep you posted on my findings. For now, i'd go to at&t store and use their sim and see if your imei comes back. Or downgrade the phone if possible and start from the bottom and work your way up.
---------- post added at 02:43 pm ---------- previous post was at 02:02 pm ----------
heres my update. Metropcs sim card is "married" to each imei/phone. My phone in question (the att s3) was not correctly associated with my account. I called metropcs customer service (1-888-8metro8) gave them the att s3 imei and the sim number. Within 10 minutes, the att s3 was up and running. I hope it helps.
Please provide feedback.
Click to expand...
Click to collapse

Problem changing flashed PagePlus phone to RingPlus

Hi, everyone. I'm new to thie forum.
A couple of years ago I bought a Galaxy S4 from eBay. It was a Sprint phone, flashed to be used at PagePlus, without UICC SIM card, 3G only. It has been working fine on PagePlus (except MMS).
Due to the lack of 4G and hearing the offers by RingPlus, I decided to move to RingPlus. I verified that the MEID and IMEI of the phone on R+ website, they both showed to be fine. So I terminated my PagePlus account, unrooted the phone back to original Samsung ROM for Sprint, and signed up for the Phoenix plan. Everything went well until this point.
I then followed the instruction on R+ website to complete the device activation for Android device (manually provisioning PRL), there's no response when I dialed "##MSL#" (the MSL is correct, as shown on my R+ account). I then tried to perform a PRL update by dialing ##72786#, the phone couldn't be activated. There's a message saying "Because of the type of account you have, we'll need to help you with the task. Please dial *2 from your Sprint phone or call Custom Care at 1-888-211-4727 from another phone so we can assist you."
I checked my MEID and IMEI again, and realized that even though the IMEI does show that it's a Galaxy S4, the MEID is actually associated with a Sanyo 3G phone. The eBay seller must have switched the MEID when flashing it to PagePlus. I didn't realize it until now. When I tried to dial a number using this phone now (after it's terminated from PagePlus), it was directed to Verizon Wireless.
From R+ forum I was told that my current MEID is a "donor MEID". I don't know what the original MEID was. The seller peeled off the sticker inside the phone. I only realized that today too.
So could anyone suggest what should I do? I was told that I need to flashed back to Sprint, but it will be difficult since I don't know the correct MEID. I was recommended to come to XDA to get some advance help. So here I'm.
Thank you very much for your help!
I went through the same process and it was a headache. You need to unflash your phone from Page Plus and reset it back to Sprint. This is going to take more than just unrooting and flashing a stock ROM.
I don't remember the exact instructions but you should Google "flash page plus back to sprint" and then look for Viper32's posts about flashing phones. There are instructions about entering ##RTN# in your dialer to reset the phone. Not sure if that was all it took because my experience was that I tried a lot of different things until one of them stuck. But that was where I started.
The easier way is possibly to take it to a Sprint store and have them reset it but I never tried it myself.

Categories

Resources