XDA,
Received my phone (vs980) and immediately rooted and installed ROM on it. I have gone through multiple ROMs with the same result in that everything works great except for the phone app. I can navigate through contacts and dial fine, but when I execute the call, the screen goes black for about 10 seconds (can still see the status bar) then finally gets to the "call in progress" screen where it immediately ends the call. Phone will not even recognize inbound calls and sends them to voicemail after about a second or two of ringing. I am currently on resurrection remix v5.1.1 but was previously on C-rom v6.5 (also tested 6.4 with same result). Unfortunately I can't say I made a call on stock before rooting/ROMming so I don't know if it's a persistent issue. I have tried clean wipe of data/system/cache/dalvik cache, and have cleared the app data for the phone and dialer apps as well to no avail. Baseband version is vs98012b. Should I try wiping internal storage as well? My next step is to return to stock and test there but that seems like a more labor intensive process that could be avoided if I'm missing something else. Could this be a possible hardware issue? All help is appreciated.
B
Related
I was trying to install the GoldenEye Rom 12 for the S4 i9505. I don't know how, but I accidentally installed the Rom for the S4 i9500. Now I'm unable to make/receive calls and Wifi is disabled.. It occasionally lags on almost every app. When I'm making calls, I'm able to dial the number. As soon as I hit the call button, my phone screen turns black and the notification bar starts flickering. As for receiving calls, I'm unable to pick up calls as the screen doesn't even appear. I tried restoring from a nandroid backup, flashing a stock rom/recovery and it doesn't solve the problem. Any ideas how do I solve it?
Help please.. It's urgent
xComplicit said:
I was trying to install the GoldenEye Rom 12 for the S4 i9505. I don't know how, but I accidentally installed the Rom for the S4 i9500. Now I'm unable to make/receive calls and Wifi is disabled.. It occasionally lags on almost every app. When I'm making calls, I'm able to dial the number. As soon as I hit the call button, my phone screen turns black and the notification bar starts flickering. As for receiving calls, I'm unable to pick up calls as the screen doesn't even appear. I tried restoring from a nandroid backup, flashing a stock rom/recovery and it doesn't solve the problem. Any ideas how do I solve it?
Click to expand...
Click to collapse
Hey
Is your phone definitely GT-I9505?
Which operator/telco are you using, in which country?
That happened to me when they first upgraded to the new bootloader. My guess is you're still on the older non-KNOXy one?
It's weird that your phone's not bricked. I would make sure that you're actually using a i9505 then download a rom for that device and flash it.
Hi guys,
I have an i9507 which is the Aus/HK variant of the i9505, on which I'm using CM11. Up until last week it was working fine, and I updated from M7 to M10 to try out the new features and still it was working fine. However, when returning to my parents house (in an area that has mostly 3G coverage) I had no reception. I tried to roll back to M7 but it didn't fix the issue.
I was unable to send texts on M10, but on M7 I could send texts fine. The issue is that I cannot receive texts or calls, and when someone tries to call me, it comes up with a window saying 'the process com.android.phone has stopped working'. As well as this, sometimes when I'm poking around in Settings seeing what I can change, Settings will close unexpectedly.
I've done a complete wipe of the phone, including all the cache and other assorted folders that you can format in the CWM submenus. For all intents and purposes I had a completely fresh, empty phone onto which I downloaded the M7 version of CM (the last known perfectly working version) and yet it still has the same problem. Any ideas?
I've flashed the modem.bin for my particular variant but to no avail.
Hi!
I rooted my old LG P700 and subsequently installed (after full system wipe + both caches wipe) [L7][ROM][4.4.2][AOSP] Vanir . I made sure to install v20DEuropeOpen.Baseband.zip as well.
Everything works fine so far, but there is one HUGE problem. When making or receiving voice calls, the incoming speaker is not heard at all most of the times, and only barely (very distant) and/or delayed. Thus, calling is virtually IMPOSSIBLE now. What can I do to fix this problem?
PS: I haven't personally touched, i.e. changed the kernel, though this might be included by the custom ROM (?). My gapps version gave me Error 7 but the Play Store had been successfully installed so I got what I needed from there.
Thank you for your assistance.
Hi all--
I wonder if you could please help me solve a tricky issue?
Before rooting, phone worked fine. Brand new Moto 5G Plus activated on Sprint network.
After rooting my G5 Plus with a custom rom (Dirty Unicorns), everything worked fine except I lost my LTE signal (Sprint). The phone functions in all other capacities (calls, SMS, wifi). To be clear, the phone is receiving a Sprint signal, but no data LTE/3G is passing through. Phone calls and SMS are fine.
When I go to Settings-Network & Internet-Mobile Network-Advanced-Carrier Settings, I get an error-- "com.android.phone has stopped."
I decided to test with another reliable custom rom so I installed LineageOS 15.1. Same exact problem-- no data, and carrier settings brings up ""com.android.phone has stopped."
Any ideas? I've googled myself to death and I've not found anything that has worked.
Thanks in advance, everyone.
Could you get us trough ur procedure of flashing ?
Sure
All done in TWRP
Factory reset (wipe data/dalvik/cache)
Install Custom Rom (either Lineage 15.1 or DU v12.5.2)
Wipe cache/dalvik
Install GApps (ARM64-- I tried to install 32-bit GApps as I've heard Moto G5 Plus runs on 32-bit architecture, but it failed-- install log told that ARM64 was the correct version for my device)
Wipe cache/dalvik
Install Magisk
Reboot
That's it-- one thing I noticed when restoring my manufacturer rom image was that I needed to issue a *#*# dialer command to get SprintDM to start recognizing the network. When I tried to issue that command in DU and LineageOS, nothing happened.
Following up on my last email
Does anyone know if the ##72786# or *#*#72786#*#* dialer command (which forces a system update to provision data with the carrier) is specific to Sprint or if it's part of Android? The reason I ask is because this command works fine on factory roms but doesn't seem to work on my rooted phones (in addition to the Moto G5 Plus, same thing happens with my wife's super old rooted Moto X with Renegade custom Rom-- but no problem with data on this phone). On stock factory rom, the phone resets and SprintDM provisions the data. On rooted Dirty Unicorns and LineageOS, nothing happens. I wonder if this broken command is related to the "com.android.phone" error I discussed above.
schleima said:
Hi all--
I wonder if you could please help me solve a tricky issue?
Before rooting, phone worked fine. Brand new Moto 5G Plus activated on Sprint network.
After rooting my G5 Plus with a custom rom (Dirty Unicorns), everything worked fine except I lost my LTE signal (Sprint). The phone functions in all other capacities (calls, SMS, wifi). To be clear, the phone is receiving a Sprint signal, but no data LTE/3G is passing through. Phone calls and SMS are fine.
When I go to Settings-Network & Internet-Mobile Network-Advanced-Carrier Settings, I get an error-- "com.android.phone has stopped."
I decided to test with another reliable custom rom so I installed LineageOS 15.1. Same exact problem-- no data, and carrier settings brings up ""com.android.phone has stopped."
Any ideas? I've googled myself to death and I've not found anything that has worked.
Thanks in advance, everyone.
Click to expand...
Click to collapse
A similar thing happened to me. I was rooted with a custom rom(Pixel Experience) but I switched carriers to Boost Mobile and now I have no data and com.android.phone crashes when I try to open carrier settings.
will be that you can support me on something about this device, a while ago I wanted to install a rom lineage 15.1 and had many bugs, one of them was that Dolby stopped audio did not want to open, so I decided to change it to stock again using minimal adb, and all good, I start the cel, but the problem continued, and restart it I get a message like 10 times in a row that says "daxUser stopped" after that, I skip another window where it says the "internal system is damaged and may be unstable to restore the cell phone factory "and I do not know what to do because I have already installed the rom allegedly stock several times and it does not take off in fact does not sound at all, the speaker is dead, I can not make calls, if the resiven but nothing is heard, it no longer connects to wifi, it leaves the few applications without any reason. ect etc, I hope you can support me with that, and if there is any solution it would be great.
Unroot, lock and take it back for repairs? Sorry, not very XDA-style answer.
Edit: are you completely sure that you flashed the right stock ROM for your device?
Try again
Alvaro Luna said:
will be that you can support me on something about this device, a while ago I wanted to install a rom lineage 15.1 and had many bugs, one of them was that Dolby stopped audio did not want to open, so I decided to change it to stock again using minimal adb, and all good, I start the cel, but the problem continued, and restart it I get a message like 10 times in a row that says "daxUser stopped" after that, I skip another window where it says the "internal system is damaged and may be unstable to restore the cell phone factory "and I do not know what to do because I have already installed the rom allegedly stock several times and it does not take off in fact does not sound at all, the speaker is dead, I can not make calls, if the resiven but nothing is heard, it no longer connects to wifi, it leaves the few applications without any reason. ect etc, I hope you can support me with that, and if there is any solution it would be great.
Click to expand...
Click to collapse
I have a Retla and received official 9.0. download the 89-2 stock firmware. You can find it here. Use the .bat
File, place inside extracted firmware click & when it restarts you should get a notification to download 89-5.. once it completes the next notification will appear.. that's 116-11 9.0..
mod edit - telegram chat spam removed