Database Users

[RECOVERY] ClockworkMod Touch & non-Touch 6.0.2.5

Hey Guys
I am sharing the latest CWM recovery images; CWM 6.0.2.5
To be straight, I used Koush's Recovery Builder to build these
latest recovery images in both, touch & non-touch variants.
And so I do not take any credit, all of it to Koush. Also, I didn't
publish a thread for this in development section since I didn't
perform any development on this.
Downloads
Touch Recovery TAR
Non-Touch Recovery TAR
Touch Recovery ZIP
Non-Touch Recovery ZIP
Click to expand...
Click to collapse
How to build on your own?
Visit the Recovery Builder
Click on the "Existing Devices" tab.
Now under the Existing Devices dropdown, select "i9300".
Tick "Touch Recovery" option if you desire for the touch variant, otherwise do not touch it.
Now click on the blue colored "Build" tab.
The page will then prompt you with a reference build ID, take note of it.
Now continue to build server.
Look for the corresponding build ID.
Once its done, click on it.
You can now download your "recovery.img" build.
How to flash?
flash TAR files with Odin or mobile Odin
flash ZIP files in recovery
and dont forget to hit thanks if you like this

tried flashing this recovery but it doesn't flash either through odin or mobile odin.

Open .tar file using 7zip and get recovery.img. Then flash it using Mobile Odin. Works fine for me

m1c4d0 said:
Open .tar file using 7zip and get recovery.img. Then flash it using Mobile Odin. Works fine for me
Click to expand...
Click to collapse
Yes that to forgot odin can now flash img files now lol my mistake
im what Willis was talking about

what the difference with the 6.0.1.2 touch version ?

Is there any reason why to select the 'crespo' build from the existing devices drop down box??
What's the difference between picking the crespo rather than the i9300 choice???

kersey said:
Is there any reason why to select the 'crespo' build from the existing devices drop down box??
What's the difference between picking the crespo rather than the i9300 choice???
Click to expand...
Click to collapse
............. Well um BIGGEST difference would be that i9300 is the intl s3 and crespo from what i remember is the nexus s so if you pick crespo you would build the latest recovery for the nexus s
im what Willis was talking about

XeactorZ said:
what the difference with the 6.0.1.2 touch version ?
Click to expand...
Click to collapse
Well the biggest thing i noticed was the ability to now sideload
and also the multiple no when wiping cache or dalvik is gone
it now only appears when doing a factory reset for good reasons
to i would hate to hit yes accidently
sorry for the bad pics they were taken on my girlfriends
crapple product lmao
im what Willis was talking about

kersey said:
Is there any reason why to select the 'crespo' build from the existing devices drop down box??
What's the difference between picking the crespo rather than the i9300 choice???
Click to expand...
Click to collapse
of course you have to select i9300 for SIII recovery !
crespo recovery is for other phone, don´t try to flash that !!
i guess 1.post is copied from other (crespo) thread, please fix nr.3 (Now under the Existing Devices dropdown, select "crespo".)
greetz
markus

75markus said:
of course you have to select i9300 for SIII recovery !
crespo recovery is for other phone, don´t try to flash that !!
i guess 1.post is copied from other (crespo) thread, please fix nr.3 (Now under the Existing Devices dropdown, select "crespo".)
greetz
markus
Click to expand...
Click to collapse
Thanks lol and yea copied that little bit i hate typing all day haha
im what Willis was talking about

sharingan92 said:
Thanks lol and yea copied that little bit i hate typing all day haha
im what Willis was talking about
Click to expand...
Click to collapse

Tested 6019 touch recovery, created full backup, reset system, format /system, restored, no errors. Note that default backup is now tar good work
Sent via TCP/IP

Something is wrong. I used the builder to build my own touch recovery yet mobil odin can't flash it. Not even if I pack it into a rar file. What do?

sharingan92 said:
Thanks lol and yea copied that little bit i hate typing all day haha
im what Willis was talking about
Click to expand...
Click to collapse
That's what confused me earlier in the thread . All worked fine on building one for i9300
Sent from my GT-I9300 using xda premium

Best feature: apply zip from adb. (install zip from sideload -- adb sideload [package])
- but doesn't work

Not the very best solution to install a recovery manager like Odin Mobile if i'am without a system ... have someone a recovery in this version that i can flash through
Odin v3 with windooze?
Many thanks

I'd need a cwm flashable zip of it.

Theshawty said:
Something is wrong. I used the builder to build my own touch recovery yet mobil odin can't flash it. Not even if I pack it into a rar file. What do?
Click to expand...
Click to collapse
strange... i build one yesterday (http://jenkins.cyanogenmod.org/job/recovery/12031/) and flashed the .img file with mobile odin without problems ...

andy572 said:
Not the very best solution to install a recovery manager like Odin Mobile if i'am without a system ... have someone a recovery in this version that i can flash through
Odin v3 with windooze?
Many thanks
Click to expand...
Click to collapse
new tar files are up have tested with mobile and desktop odin and both are working perfectly

sharingan92 said:
new tar files are up have tested with mobile and desktop odin and both are working perfectly
Click to expand...
Click to collapse
Much obliged, works well now! Never thought I'd see anything past 6.0.1.2 for this device
Sent from my GT-I9300 using Tapatalk 2

[Q] Change/Replace TWRP Recovery with CWM (ClockWorkMod) on LG G2

Hi guys,
I just want to ask you how could I replace TWRP Recovery with CWM on my LG G2 D802 International?Are there any issue/incompatibility?
I have rooted and installed TWRP, but I have issue with installing CyanogenMod 10.2 Stable (I checked MD5 and downloaded it many times): as I understand is a problem of TWRP compatibility.

Maxximo88 said:
Hi guys,
I just want to ask you how could I replace TWRP Recovery with CWM on my LG G2 D802 International?Are there any issue/incompatibility?
I have rooted and installed TWRP, but I have issue with installing CyanogenMod 10.2 Stable (I checked MD5 and downloaded it many times): as I understand is a problem of TWRP compatibility.
Click to expand...
Click to collapse
It depends on what you download. If you download the recovery.img you can use the app "flashify" to flash the recovery, or if you download a flashable .zip then flash it in recovery then reboot recovery.
There are also instructions on how to use adb and loki here: http://forum.xda-developers.com/showthread.php?t=2449670

Mandelbrot.Benoit said:
It depends on what you download. If you download the recovery.img you can use the app "flashify" to flash the recovery, or if you download a flashable .zip then flash it in recovery then reboot recovery.
There are also instructions on how to use adb and loki here: http://forum.xda-developers.com/showthread.php?t=2449670
Click to expand...
Click to collapse
Mandelbrot.Benoit thanks fot your reply.
I'm interested with the flashable zip, so I just need to download it from Official CWM topic the file called "ZIP FILES - OFFICIAL - TOUCH D802" and flash it from TWRP recovery?

Maxximo88 said:
Mandelbrot.Benoit thanks fot your reply.
I'm interested with the flashable zip, so I just need to download it from Official CWM topic the file called "ZIP FILES - OFFICIAL - TOUCH D802" and flash it from TWRP recovery?
Click to expand...
Click to collapse
I'm not 100% if thats a "lokified" recovery or not. I don't think you'll hurt anything by flashing it. If you can't flash something using that recovery then there is an issue and you can flash another recovery.

Maxximo88 said:
Mandelbrot.Benoit thanks fot your reply.
I'm interested with the flashable zip, so I just need to download it from Official CWM topic the file called "ZIP FILES - OFFICIAL - TOUCH D802" and flash it from TWRP recovery?
Click to expand...
Click to collapse
I used the Flashify app from the play store to switch recoveries with no issues.

Mandelbrot.Benoit said:
I'm not 100% if thats a "lokified" recovery or not. I don't think you'll hurt anything by flashing it. If you can't flash something using that recovery then there is an issue and you can flash another recovery.
Click to expand...
Click to collapse
What do You suggest?
Otherwise, there is also the app called ROM Manger which should automatically flash the CWM.
The important thing is that it does not create problems between recovery.

mouf32 said:
I used the Flashify app from the play store to switch recoveries with no issues.
Click to expand...
Click to collapse
Thanks Mouf32! :victory:

No issue guys,
CWM flashed correctly! Thanks!

[Stock][SGP312][5.0.2][PreRooted]10.6.A.0.454 VMo_De

Model : SGP312
Android: 5.0.2
Market: Germany
Build : 1273-3719_10.6.A.0.454_R2E
Included:
- UPDATE-SuperSU-v2.46.zip
Rom is prerooted but XZDualRecovery isn't working for TabZ with Lollipop at the moment so it's not included, check this thread for news about it : http://forum.xda-developers.com/showthread.php?t=2261606
Flash this zip from 4.4.* recovery and you're done
https://mega.nz/#!YFlihZoa!qR87H4kkVdE9GEG5kkxJ59-EBlc6CdsimqKgNJRJoTw

Thanks a lot for this... Any chance to have and md5 so as to make sure it has been downloaded correctly?

botsaris said:
Thanks a lot for this... Any chance to have and md5 so as to make sure it has been downloaded correctly?
Click to expand...
Click to collapse
Sure : MD5 Sum is 2245197dac0a7388d7f2f2b3ae63c26a

Tried twice but its not booting.....

*justintime* said:
Tried twice but its not booting.....
Click to expand...
Click to collapse
For me everything went fine...First boot takes while.

I know first boot takes a while. But its not booting at all. Screen stays off and i can only enter fastboot. But never mind. I while take a different route

Does it work with locked Bootloader?

redsk1n said:
Does it work with locked Bootloader?
Click to expand...
Click to collapse
yes, it's stock rom with stock kernel

Confirmed working.
Thank you!

Problem...
I think I did something wrong.
Flashed in PhilZ, installation (Rom and SuperSU) worked fine.
Selected "Reboot now" afterwards.
Now it's dead.
Nothing on power on, no fastboot, no flashmode...any suggestions?

DatFrosty said:
I think I did something wrong.
Flashed in PhilZ, installation (Rom and SuperSU) worked fine.
Selected "Reboot now" afterwards.
Now it's dead.
Nothing on power on, no fastboot, no flashmode...any suggestions?
Click to expand...
Click to collapse
Try VOL+ Power to reset it.

Thanks!
That actually did the trick.
I guess the tablet was stuck in some sorta weird power-state.
Tried it once, but probably held the buttons down too shortly.
Managed to get it to flash once, the three times.
Got into flashmode from there, everything running fine on 5.0.2 stock atm.
I guess next step is to root it
Thanks again man.

DatFrosty said:
Thanks!
That actually did the trick.
I guess the tablet was stuck in some sorta weird power-state.
Click to expand...
Click to collapse
This happens if tablet hangs with screen off.

hi, currently i'm in jb 4.3 with cwm installed..
Can I upgrade directly via cwm? thanks!

duke_dreadmoore said:
hi, currently i'm in jb 4.3 with cwm installed..
Can I upgrade directly via cwm? thanks!
Click to expand...
Click to collapse
Yes you can. But this ROM on 1st post doesn't contain recovery, so you will have to install .zip with it via CWM too.

Hi everyone.
Can I update from official kitkat with this rom?
My device is rooted but that's all. No recovery or unlocked bootloader. SGP311.
If it's possible how can I do that? Can I keep my data and apps?
Thanks.

bobo1425 said:
Hi everyone.
Can I update from official kitkat with this rom?
My device is rooted but that's all. No recovery or unlocked bootloader. SGP311.
If it's possible how can I do that? Can I keep my data and apps?
Thanks.
Click to expand...
Click to collapse
without root and recovery no way to update.

Can anyone post a new link to the zip file? Mega no longer is hosting the file
Thanks in advance.

Rassilon7 said:
Can anyone post a new link to the zip file? Mega no longer is hosting the file
Thanks in advance.
Click to expand...
Click to collapse
Hi, I should update my post with new build 10.7.A.0.22 (android 5.1.1) tomorrow

Thank you, that's very kind.

TWRP Reboots During Flash

Ok so I just got this tablet today (sm-t230nu) and I got it rooted. Rebooted into TWRP, and in my excitement, forgot to make a backup. I wiped everything, minus SD card. Went to flash a ROM, and it reboots TWRP. I've tried a few different ROMs, with same result. Zip file verification is unchecked, as well. Normally I could just restore the backup, but I didn't think anything would go wrong, and now I'm kinda stuck lol. I am downloading the stock ODIN file to flash now, but in the meantime I thought I'd try and fix this issue, too. Thanks

Bump. Anyone?

ChrisAC84 said:
Bump. Anyone?
Click to expand...
Click to collapse
i have sm-t230 and i didnt have this issue.... which twrp version you have?

thelous said:
i have sm-t230 and i didnt have this issue.... which twrp version you have?
Click to expand...
Click to collapse
I'm using 2.8.0.1
EDIT: Flashed stock firmware, then rerooted and tried again. It worked this time around. I think I forgot to install busybox last time, that's the only thing I did different

ChrisAC84 said:
I'm using 2.8.0.1
EDIT: Flashed stock firmware, then rerooted and tried again. It worked this time around. I think I forgot to install busybox last time, that's the only thing I did different
Click to expand...
Click to collapse
i dont think it was busybox's fault because custom recoveries dont need even root if they are installed thru odin

thelous said:
i dont think it was busybox's fault because custom recoveries dont need even root if they are installed thru odin
Click to expand...
Click to collapse
I'm not sure what the issue was, then. A fresh install fixed it, though, so I dunno. Thanks anyways

Fail in flashing TWRP

Hi all I have face issue in my grand 2 7102 device. And issue is when try to flash TWRP Recovery with all 3 methods Odin flashify and flashable zip file and I try all methods but after flash TWRP recovery it's falil I mean it again put me in download mode.So any solution available then help me......

First Answer my few questions?
1. Your phone is able to boot in system or stuck in odin.
2. Tell me your Os version.
3. You are able to access stock recovery or not.

Sharma Manu said:
First Answer my few questions?
1. Your phone is able to boot in system or stuck in odin.
2. Tell me your Os version.
3. You are able to access stock recovery or not.
Click to expand...
Click to collapse
CWM work perfectly for me now i am in Resurrection Remix marshmallow rom but before i am on stock 4.4.2 but when i flash twrp its not flashing all methods again put me in download mode again that's all.

mahu patel said:
CWM work perfectly for me now i am in Resurrection Remix marshmallow rom but before i am on stock 4.4.2 but when i flash twrp its not flashing all methods again put me in download mode again that's all.
Click to expand...
Click to collapse
Sorry for My late reply:highfive: M little busy
Use this link to download recovery:-
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0?_e_pi_=7,PAGE_ID10,9134887488
And please say Thanks to aapav01 for his hard work use only odin flash file .tar personally this works for Me..

Sharma Manu said:
Sorry for My late reply:highfive: M little busy
Use this link to download recovery:-
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0?_e_pi_=7,PAGE_ID10,9134887488
And please say Thanks to aapav01 for his hard work use only odin flash file .tar personally this works for Me..
Click to expand...
Click to collapse
Man i told u before i tried these all exactly 3 type of file with 3 methods.

If TWRP doesnt work, idk if this can help you. The last options is flash other recovery to remove this problem. Try philz and cwm (which is the same but philz is advanced). Tip: If one recovery doesnt work dont try it
PS: You have the same scenario like me on TWRP installation

NYT_RootComm said:
If TWRP doesnt work, idk if this can help you. The last options is flash other recovery to remove this problem. Try philz and cwm (which is the same but philz is advanced). Tip: If one recovery doesnt work dont try it
PS: You have the same scenario like me on TWRP installation
Click to expand...
Click to collapse
Ya know it i flash 10 CUSTOM rom before but mostly upcoming rom work with only twrp sooooo

mahu patel said:
Ya know it i flash 10 CUSTOM rom before but mostly upcoming rom work with only twrp sooooo
Click to expand...
Click to collapse
Really? Crap, i have to change recovery.

NYT_RootComm said:
Really? Crap, i have to change recovery.
Click to expand...
Click to collapse
No not at all u didn't need to change now wait some time if u need then change upcomung Nougat 7 version work with all type of recovery s so don't need to change

mahu patel said:
No not at all u didn't need to change now wait some time if u need then change upcomung Nougat 7 version work with all type of recovery s so don't need to change
Click to expand...
Click to collapse
Typically root community is getting better and better everyday

NYT_RootComm said:
Typically root community is getting better and better everyday
Click to expand...
Click to collapse
Ya awesome progress.I am 100% sure it's better than manufacturer like samsung

I have same issue I tried many methods to flash twrp but everytime it fails cwm just work flawlessly but then I tried flashing twrp.img file with flashify and it works thanx