[RECOVERY] ClockworkMod Touch & non-Touch 6.0.2.5 - Galaxy S III General

Hey Guys
I am sharing the latest CWM recovery images; CWM 6.0.2.5
To be straight, I used Koush's Recovery Builder to build these
latest recovery images in both, touch & non-touch variants.
And so I do not take any credit, all of it to Koush. Also, I didn't
publish a thread for this in development section since I didn't
perform any development on this.
Downloads
Touch Recovery TAR
Non-Touch Recovery TAR
Touch Recovery ZIP
Non-Touch Recovery ZIP
Click to expand...
Click to collapse
How to build on your own?
Visit the Recovery Builder
Click on the "Existing Devices" tab.
Now under the Existing Devices dropdown, select "i9300".
Tick "Touch Recovery" option if you desire for the touch variant, otherwise do not touch it.
Now click on the blue colored "Build" tab.
The page will then prompt you with a reference build ID, take note of it.
Now continue to build server.
Look for the corresponding build ID.
Once its done, click on it.
You can now download your "recovery.img" build.
How to flash?
flash TAR files with Odin or mobile Odin
flash ZIP files in recovery
and dont forget to hit thanks if you like this

tried flashing this recovery but it doesn't flash either through odin or mobile odin.

Open .tar file using 7zip and get recovery.img. Then flash it using Mobile Odin. Works fine for me

m1c4d0 said:
Open .tar file using 7zip and get recovery.img. Then flash it using Mobile Odin. Works fine for me
Click to expand...
Click to collapse
Yes that to forgot odin can now flash img files now lol my mistake
im what Willis was talking about

what the difference with the 6.0.1.2 touch version ?

Is there any reason why to select the 'crespo' build from the existing devices drop down box??
What's the difference between picking the crespo rather than the i9300 choice???

kersey said:
Is there any reason why to select the 'crespo' build from the existing devices drop down box??
What's the difference between picking the crespo rather than the i9300 choice???
Click to expand...
Click to collapse
............. Well um BIGGEST difference would be that i9300 is the intl s3 and crespo from what i remember is the nexus s so if you pick crespo you would build the latest recovery for the nexus s
im what Willis was talking about

XeactorZ said:
what the difference with the 6.0.1.2 touch version ?
Click to expand...
Click to collapse
Well the biggest thing i noticed was the ability to now sideload
and also the multiple no when wiping cache or dalvik is gone
it now only appears when doing a factory reset for good reasons
to i would hate to hit yes accidently
sorry for the bad pics they were taken on my girlfriends
crapple product lmao
im what Willis was talking about

kersey said:
Is there any reason why to select the 'crespo' build from the existing devices drop down box??
What's the difference between picking the crespo rather than the i9300 choice???
Click to expand...
Click to collapse
of course you have to select i9300 for SIII recovery !
crespo recovery is for other phone, don´t try to flash that !!
i guess 1.post is copied from other (crespo) thread, please fix nr.3 (Now under the Existing Devices dropdown, select "crespo".)
greetz
markus

75markus said:
of course you have to select i9300 for SIII recovery !
crespo recovery is for other phone, don´t try to flash that !!
i guess 1.post is copied from other (crespo) thread, please fix nr.3 (Now under the Existing Devices dropdown, select "crespo".)
greetz
markus
Click to expand...
Click to collapse
Thanks lol and yea copied that little bit i hate typing all day haha
im what Willis was talking about

sharingan92 said:
Thanks lol and yea copied that little bit i hate typing all day haha
im what Willis was talking about
Click to expand...
Click to collapse

Tested 6019 touch recovery, created full backup, reset system, format /system, restored, no errors. Note that default backup is now tar good work
Sent via TCP/IP

Something is wrong. I used the builder to build my own touch recovery yet mobil odin can't flash it. Not even if I pack it into a rar file. What do?

sharingan92 said:
Thanks lol and yea copied that little bit i hate typing all day haha
im what Willis was talking about
Click to expand...
Click to collapse
That's what confused me earlier in the thread . All worked fine on building one for i9300
Sent from my GT-I9300 using xda premium

Best feature: apply zip from adb. (install zip from sideload -- adb sideload [package])
- but doesn't work

Not the very best solution to install a recovery manager like Odin Mobile if i'am without a system ... have someone a recovery in this version that i can flash through
Odin v3 with windooze?
Many thanks

I'd need a cwm flashable zip of it.

Theshawty said:
Something is wrong. I used the builder to build my own touch recovery yet mobil odin can't flash it. Not even if I pack it into a rar file. What do?
Click to expand...
Click to collapse
strange... i build one yesterday (http://jenkins.cyanogenmod.org/job/recovery/12031/) and flashed the .img file with mobile odin without problems ...

andy572 said:
Not the very best solution to install a recovery manager like Odin Mobile if i'am without a system ... have someone a recovery in this version that i can flash through
Odin v3 with windooze?
Many thanks
Click to expand...
Click to collapse
new tar files are up have tested with mobile and desktop odin and both are working perfectly

sharingan92 said:
new tar files are up have tested with mobile and desktop odin and both are working perfectly
Click to expand...
Click to collapse
Much obliged, works well now! Never thought I'd see anything past 6.0.1.2 for this device
Sent from my GT-I9300 using Tapatalk 2

Related

[RELEASE] Multi Recovery Flasher

im just letting the S3 users know that i have now got an s3 and will begin developing for s3 now!
starting with my first creation for the s3, i have made a flashable .zip file that flashes the selected recovery, so no need for re-downloading and re-flashing, simply flash the .zip, then aroma will open asking whitch recovery to flash then it will flash then reboot into the new recovery!
coming soon!
ricky310711 said:
im just letting the S3 users know that i have now got an s3 and will begin developing for s3 now!
starting with my first creation for the s3, i have made a flashable .zip file that flashes the selected recovery, so no need for re-downloading and re-flashing, simply flash the .zip, then aroma will open asking whitch recovery to flash then it will flash then reboot into the new recovery!
coming soon!
Click to expand...
Click to collapse
Looking forward, it will be useful, any information about the development state?
mirroalex said:
Looking forward will be useful, any information about the development state?
Click to expand...
Click to collapse
i actually just amde the packages and tested each of them, all ive gotta do is configure aroma and we will be up and running by tommorow arvo!
will it automatically download the newest version of the selected recovery?
chrismast said:
will it automatically download the newest version of the selected recovery?
Click to expand...
Click to collapse
Its a flashable .zip package, I will just gather the latest recoveries and update every month
ricky310711 said:
Its a flashable .zip package, I will just gather the latest recoveries and update every month
Click to expand...
Click to collapse
ok, good luck with it!
personally I do not see the point yet as I just can download the single recovery (there is anyway not that much choice) and flash it but I am sure there are users that will appreciate an Aroma installer.
chrismast said:
ok, good luck with it!
personally I do not see the point yet as I just can download the single recovery (there is anyway not that much choice) and flash it but I am sure there are users that will appreciate an Aroma installer.
Click to expand...
Click to collapse
The point of this being that some recoveries cant flash certain .zip files... eg twrp 2.5.0.0 cannot flash .zip files with aroma, this is also a pachage to help developers!
ricky310711 said:
The point of this being that some recoveries cant flash certain .zip files... eg twrp 2.5.0.0 cannot flash .zip files with aroma, this is also a pachage to help developers!
Click to expand...
Click to collapse
ah ok, didn't know that, anyway as I said for certain people surly helpful! Good luck!
An app that could connect to a central repository and download the latest versions would be great. Then using the same method stweaks by siyah uses to "hijack" recovery or temp boot would make more sense to me.
That way you open app, choose recovery to boot and flash your zips. Then boot back to android...
Rather than boot recovery, flash zip,,choose recovery, flash zip...
Or just use philz recovery and be able to flash all zips anyway
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
An app that could connect to a central repository and download the latest versions would be great. Then using the same method stweaks by siyah uses to "hijack" recovery or temp boot would make more sense to me.
That way you open app, choose recovery to boot and flash your zips. Then boot back to android...
Rather than boot recovery, flash zip,,choose recovery, flash zip...
Or just use philz recovery and be able to flash all zips anyway
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Seems legit, although I do not have time to make a . Apk of it..
Also keep in mibd what if you didnt have data connection, or yet couldnt even boot...

New Flash-able Recoveries thanks to Dhacker...

Fastboot img recoveries:
http://androidhosting.org/Devs/Dhacker29/recovery/
Flash-able xt907/xt926 versions: at My goodies homepage: http://forum.xda-developers.com/showthread.php?p=42656451#post42656451
Edit I have tested all the xt907 & xt926 (on my 907) flash-able recoveries to some degree & the xt907-OUDhs-touch-recovery.img is in the xt907-OUDhs-1.0.3.5-key-recovery.zip and is My daily recovery. OUDhs swipe does not work for the xt907.
aviwdoowks said:
http://androidhosting.org/Devs/Dhacker29/recovery/
Click to expand...
Click to collapse
Thanks. I was about to go fastboot back to the earlier JB OTA because the old recoveries weren't sticking.
EDIT: I spoke too soon. So far none of the linked recoveries are working...
mentose457 said:
Thanks. I was about to go fastboot back to the earlier JB OTA because the old recoveries weren't sticking.
Click to expand...
Click to collapse
Not yet willing to try Rom Mgr with the Photon Q flash?
aviwdoowks said:
Not yet willing to try Rom Mgr with the Photon Q flash?
Click to expand...
Click to collapse
What? Im not sure what you are asking.
mentose457 said:
What? Im not sure what you are asking.
Click to expand...
Click to collapse
I predict Rom Manager will work on the Razr HD.
http://forum.xda-developers.com/showthread.php?t=2382638
aviwdoowks said:
http://forum.xda-developers.com/showthread.php?t=2382638
Click to expand...
Click to collapse
It did work. Thanks.
mentose457 said:
It did work. Thanks.
Click to expand...
Click to collapse
Let others know on the thread....
mentose457 said:
Thanks. I was about to go fastboot back to the earlier JB OTA because the old recoveries weren't sticking.
EDIT: I spoke too soon. So far none of the linked recoveries are working...
Click to expand...
Click to collapse
Strange the XT907's do. The oudhs use keys, not swipe ready. Could be true for the HD too.
mentose457 said:
Thanks. I was about to go fastboot back to the earlier JB OTA because the old recoveries weren't sticking.
EDIT: I spoke too soon. So far none of the linked recoveries are working...
Click to expand...
Click to collapse
Btw how did you install the img file?
You might want to try the zips I made.
aviwdoowks said:
Btw how did you install the img file?
You might want to try the zips I made.
Click to expand...
Click to collapse
I flashed it the same way you flash any image:
Fastboot flash recovery <recovery>.img
If your zips are made from the images then i doubt they will work. Plus, I dont have a recovery to flash them in.
Anyway the Photon Q recovery worked for one reboot then it was somehow overridden by the stock recovery. In other words: I flashed the Photon Q recovery via Rom Manager > rebooted into recovery via Rom Manager > from recovery, booted normally > rebooted into recovery and found it had reverted to the stock one.
The N7 originally had this issue. Ill look into how they fixed it. Found it...
You simply navigate to /system and delete or rename the file named: recovery-from-boot.p. Once you do that, reboot to download mode (fastboot) and flash the recovery like normal. Then reboot into recovery.
Upon exiting the recovery (OUDhs) it noticed that the system would potentially overwrite the recovery so it asked it i would like to disable it. I selected 'yes' as I obviously want to retain the custom recovery.
mentose457 said:
I flashed it the same way you flash any image:
Fastboot flash recovery <recovery>.img
If your zips are made from the images then i doubt they will work. Plus, I dont have a recovery to flash them in.
Anyway the Photon Q recovery worked for one reboot then it was somehow overridden by the stock recovery. In other words: I flashed the Photon Q recovery via Rom Manager > rebooted into recovery via Rom Manager > from recovery, booted normally > rebooted into recovery and found it had reverted to the stock one.
The N7 originally had this issue. Ill look into how they fixed it. Found it...
You simply navigate to /system and delete or rename the file named: recovery-from-boot.p. Once you do that, reboot to download mode (fastboot) and flash the recovery like normal. Then reboot into recovery.
Upon exiting the recovery (OUDhs) it noticed that the system would potentially overwrite the recovery so it asked it i would like to disable it. I selected 'yes' as I obviously want to retain the custom recovery.
Click to expand...
Click to collapse
When on stock always choose yes on reboot. To let cwmr make "install-recovery.sh" into ....bak.
Yet once on a custom rom- choose any no.
Thanks
So both the img file & Rom Manager may be working for you?
aviwdoowks said:
When on stock always choose yes on reboot. To let cwmr make "install-recovery.sh" into ....bak.
Yet once on a custom rom- choose any no.
Thanks
So both the img file & Rom Manager may be working for you?
Click to expand...
Click to collapse
Yes, I used one of DHs imgs. I didn't try the Photon Q recovery from ROM Manager because the ones made for the HD work.
Sent from my DROID RAZR HD using Tapatalk 4
Rom manager doesn't work for me. Says device not supported. So all I do is install the cwmr img file in fastboot? Monday computer needed?
Sent from my DROID RAZR MAXX HD
Yes, fastboot. ADB is your friend!
Sent from my XT926 using Tapatalk 2
BTW, thank you for this thread! Made things much more simple for me this afternoon.
Sent from my XT926 using Tapatalk 2
jfriend33 said:
Rom manager doesn't work for me. Says device not supported. So all I do is install the cwmr img file in fastboot? Monday computer needed?
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
During setup what recovery did you choose?
Was it Photon Q?
Maybe I'm just paranoid, but I wouldn't trust ROM Manager to properly flash a recovery on my phone after picking a different device.
Doing it with fastboot takes about 5 secs anyway.
I don't even remember I'm pretty certain it automatically said my device wasn't supported. I wouldn't have chosen a different model.
Sent from my DROID RAZR MAXX HD
jfriend33 said:
I don't even remember I'm pretty certain it automatically said my device wasn't supported. I wouldn't have chosen a different model.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Yes the photon Q recovery (hard key ver) works on the M 100%.
http://forum.xda-developers.com/showthread.php?t=2382638
read carefully.
All hard key 926 recoveries (3 hard key versions Here: http://forum.xda-developers.com/showthread.php?p=42656451#post42656451)
work on my M therefore .....
Is there a version that works with Link2SD sdext2?
The latest one from dhacker does not. On backup, it says:
No sd-ext found. Skipping backup of sd-ext.
Click to expand...
Click to collapse
sd-ext is not in the fstab. If I manually mount /dev/block/mmcblk1p2 to it and try to back up, it says:
Backing up data...
Error while making a backup image of /data!
Click to expand...
Click to collapse
Anyone know where the github of CWM is?

touch screen doesn't work in TWRP/CWM

Touch screen is not working in TWRP and CWM on my phone. I'm running stock ROM (screens.attached), and flashed TWRP as per this thread, when touch screen didn't work, I went ahead and downloaded a TWRP app from Google Play and tried flasing with it (I'm rooted, yes) - same result, no touch screen. Later, I flashed TWRP .img with Odin, by converting it with this tool. Gave up and flashed CWM Touch, but the same problem persisted. What is going on, you think? I'm prefer TWRP, but using CWM now, since at least I can manipulate it using volume buttons.
My stock i9500 screenshot and here
Appreciate any input.
kalina288 said:
Touch screen is not working in TWRP and CWM on my phone. I'm running stock ROM (screens.attached), and flashed TWRP as per this thread, when touch screen didn't work, I went ahead and downloaded a TWRP app from Google Play and tried flasing with it (I'm rooted, yes) - same result, no touch screen. Later, I flashed TWRP .img with Odin, by converting it with this tool. Gave up and flashed CWM Touch, but the same problem persisted. What is going on, you think? I'm prefer TWRP, but using CWM now, since at least I can manipulate it using volume buttons.
My stock i9500 screenshot and here
Appreciate any input.
Click to expand...
Click to collapse
Try using Philz touch(attached) see if that works ?
11calcal said:
Try using Philz touch(attached) see if that works ?
Click to expand...
Click to collapse
Thanks, I'll be leaving this for my last option, if nothing else will work. Want to be able to use TWRP though.
kalina288 said:
Thanks, I'll be leaving this for my last option, if nothing else will work. Want to be able to use TWRP though.
Click to expand...
Click to collapse
Have you tried downloading a TWRP zip & flashing it in CWM?
11calcal said:
Have you tried downloading a TWRP zip & flashing it in CWM?
Click to expand...
Click to collapse
Interesting idea :fingers-crossed:, but I never saw a TWRP in zip, either .img or .tar for Odin.
kalina288 said:
Interesting idea :fingers-crossed:, but I never saw a TWRP in zip, either .img or .tar for Odin.
Click to expand...
Click to collapse
Here's a link to TWRP zip don't know how new it is ?
11calcal said:
Here's a link to TWRP zip don't know how new it is ?
Click to expand...
Click to collapse
Thanks, but the link is for i9505, I have i9500.
kalina288 said:
Thanks, but the link is for i9505, I have i9500.
Click to expand...
Click to collapse
My bad sorry just typed twrp zip into Google & it came up & forgot you were i9500 ?
Here's the twrp zip file for your version
11calcal said:
My bad sorry just typed twrp zip into Google & it came up & forgot you were i9500 ?
Here's the twrp zip file for your version
Click to expand...
Click to collapse
Flashed .zip via CWM - same result. Touch is not working...Such a frustration
kalina288 said:
Flashed .zip via CWM - same result. Touch is not working...Such a frustration
Click to expand...
Click to collapse
Personally I've never had any issues at all with Philz touch so I would give that a go ?
See how you get on with that & you can always return to cwm
11calcal said:
Personally I've never had any issues at all with Philz touch so I would give that a go ?
See how you get on with that & you can always return to cwm
Click to expand...
Click to collapse
Philz touch works well and FINALLY I can use touch screen... Thanks!
kalina288 said:
Philz touch works well and FINALLY I can use touch screen... Thanks!
Click to expand...
Click to collapse
Thank f♢c☆ for that
I told you to use Philz in 1st instance
Glad it's sorted

[Q] Need help, Goes into download mode autmatically

I have SM-T5430nu and I used Flashify to install TWRP (twrp2830_falcon_pac5sub77_v2.img) and it went into recovery and download mode. What do I need to do to fix this? Is there a stock ROM I can reflash in odin? Where can I get TWRP and install it?
Thanks
Jason
sakui23 said:
I have SM-T5430nu and I used Flashify to install TWRP (twrp2830_falcon_pac5sub77_v2.img) and it went into recovery and download mode. What do I need to do to fix this? Is there a stock ROM I can reflash in odin? Where can I get TWRP and install it?
Thanks
Jason
Click to expand...
Click to collapse
Here is the file to flash through Odin that will return everything back to stock factory settings (if you're in Canada don't use that file I think I have a better one for you). Be warned in flashing back to stock, you WILL lose all of your personal data saved on the tablet and there's no way to reverse that if you haven't backed things up.
It sounds like you're attempting to use an outdated version of TWRP. The most current build can be found in the first post of this thread. Download from the line that's right at the top:
TWRP 2.8.4.0 MATISSE WIFI IMG ZIP TAR
Click to expand...
Click to collapse
Either download the img file to flash with flashify or the tar file to flash with Odin
sakui23 said:
I have SM-T5430nu and I used Flashify to install TWRP (twrp2830_falcon_pac5sub77_v2.img) and it went into recovery and download mode. What do I need to do to fix this? Is there a stock ROM I can reflash in odin? Where can I get TWRP and install it?
Thanks
Jason
Click to expand...
Click to collapse
At first reflash your stock firmware . And , what the hell did you decide that this is your TWRP . T53x called matisse . Taken from here http://forum.xda-developers.com/tab-4/development/recovery-twrp-2-8-1-0-samsung-galaxy-t2922795 or from here https://www.androidfilehost.com/?w=files&flid=23537 .
repey6 said:
At first reflash your stock firmware . And , what the hell did you decide that this is your TWRP . T53x called matisse . Taken from here http://forum.xda-developers.com/tab-4/development/recovery-twrp-2-8-1-0-samsung-galaxy-t2922795 or from here https://www.androidfilehost.com/?w=files&flid=23537 .
Click to expand...
Click to collapse
Where can I get a stock rom?
Thanks in advance.
sakui23 said:
Where can I get a stock rom?
Thanks in advance.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4nVdlEf1VK3MkhFV01YclZ0ZkU/view?usp=sharing
sakui23 said:
Where can I get a stock rom?
Thanks in advance.
Click to expand...
Click to collapse
Odin flashable factory image
Custom recovery flashable stock rom
For future reference, the "falcon" in the incorrect recovery file refers to the development name of the device that that recovery is actually intended for, one of the Motorola Falcon line of phones. Almost all devices have development codenames that have no resemblance or relevance to their actual retail name. All variants of the 10.1" Tab 4 are referred to as "Matisse" for development purposes. My first experience with this was with my first android phone, the Pantech Burst. Its development name was "Presto" and therefore all roms files, recoveries, etc. bore that Presto as part of its name. Most recovery/rom files for this tablet will either have the word matisse in the file name or will make some reference to that.
Repey, yes he should be aware of that before indiscriminately flashing files, but in his defense nothing that comes with the tablet references the codename Matisse. When I first came to this forum I had to google Matisse before I was 100% sure what you and Moonbutt74 were referencing (although I had a hunch because of my past experience)
Well, thanks for everything and it's in working order, almost.....before rooting, the tab was like a tank in term of battery life (almost 3 days) now its 1/2 - 1 day of a charge. I have juice defender ultimate and i'm getting x1.01 from the extreme profile.
My official model number is SM-T530NZWSXAR
sakui23 said:
Well, thanks for everything and it's in working order, almost.....before rooting, the tab was like a tank in term of battery life (almost 3 days) now its 1/2 - 1 day of a charge. I have juice defender ultimate and i'm getting x1.01 from the extreme profile.
My official model number is SM-T530NZWSXAR
Click to expand...
Click to collapse
Fine , when you install custom recovery you may to install this custom firmware http://forum.xda-developers.com/tab-4/development/rom-customrom-t530-t531-t535-t3006180 for your model .

New TWRP version.

So I just noticed there's a new TWRP build up for us! Just thought I'd throw this out there, not sure what's different.
https://dl.twrp.me/shamu/
the only change is "Bring back /misc"
you should update if you are using cm14.1, cmupdater can cause bootloop with twrp 3.0.2.0 or older
8zabi said:
you should update if you are using cm14.1, cmupdater can cause bootloop with twrp 3.0.2.0 or older
Click to expand...
Click to collapse
I was struggling with this this morning. I was stuck in Recovery but managed to get back into System by doing a Reboot Bootloader, then Start. Then I downloaded the new TWRP and flashed it, all is well now. Would have been easier if I had access to a computer this morning.
psycho_asylum said:
I was struggling with this this morning. I was stuck in Recovery but managed to get back into System by doing a Reboot Bootloader, then Start. Then I downloaded the new TWRP and flashed it, all is well now. Would have been easier if I had access to a computer this morning.
Click to expand...
Click to collapse
Flashify is usually good for that!
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
Boot into recovery
Select install
Select near the bottom IMG button
Select IMG file
Select type of IMG ( boot, recovery)
Slide to start once finished reboot to recovery and check version
Reboot to O's
Profit
Sent from my Nexus 6 using XDA Labs
Read several posts about bad download. Before flashing check the size of TWRP version 3.0.2.1. The file size is 11,3 Mb.
https://dl.twrp.me/shamu/
tsjanda said:
Boot into recovery
Select install
Select near the bottom IMG button
Select IMG file
Select type of IMG ( boot, recovery)
Slide to start once finished reboot to recovery and check version
Reboot to O's
Profit
Sent from my Nexus 6 using XDA Labs
Click to expand...
Click to collapse
Put phone into bootloader mode. Hold shift and right click to "Open command window here" where you have ADB and your TWRP file (assuming Windows PC). Type "fastboot flash recovery twrp-3.0.2-1-shamu.img". Easier, quicker, and potentially safer IMO.
Dopamin3 said:
..... "fastboot flash recovery twrp-3.0.2-1-shamu.img". Easier, quicker, and potentially safer IMO.
Click to expand...
Click to collapse
That's the most basic method, but with the app FlashFire you don't need a PC.
NLBeev said:
Read several posts about bad download. Before flashing check the size of TWRP version 3.0.2.1. The file size is 11,3 Mb.
https://dl.twrp.me/shamu/
Click to expand...
Click to collapse
Thank you for this. If you are using Tapatalk latest app it opens the link in its own browser and the download is only 6.92k. Opening in chrome beta and downloading gets the whole file downloaded.
Sent from my Pixel XL using Tapatalk
NLBeev said:
That's the most basic method, but with the app FlashFire you don't need a PC.
Click to expand...
Click to collapse
Depending on version you don't even need FlashFire. TWRP can flash the updated image.
Strephon Alkhalikoi said:
Depending on version you don't even need FlashFire. TWRP can flash the updated image.
Click to expand...
Click to collapse
In this case not possible, because the flashed version of TWRP-recovery was corrupt.
NLBeev said:
In this case not possible, because the flashed version of TWRP-recovery was corrupt.
Click to expand...
Click to collapse
I guess I took your post out of context, since your post didn't mention a corrupt download, but earlier posts did.
Strephon Alkhalikoi said:
I guess I took your post out of context, since your post didn't mention a corrupt download, but earlier posts did.
Click to expand...
Click to collapse
That's imaginable, because I had to edit the post.
I have made a mistake; didn't check the file size. After reboot to recovery, I noticed that a corrupt IMG was flashed.
EDIT
Version 3.0.3-0 available see next post.
TWRP-recovery version 3.0.3-0 for Nexus 6 available.
https://dl.twrp.me/shamu/twrp-3.0.3-0-shamu.img.html
3.1.0-0
https://dl.twrp.me/shamu/twrp-3.1.0-0-shamu.img.html
What's new:
https://www.xda-developers.com/twrp...-support-for-adb-backup-ab-ota-zips-and-more/
Installed version 3.1.0-0. With all the changes themes need to be reworked. Also, there are rumblings in the XDA article discussion thread that Aroma does not work on this recovery. I'll have to check that.
EDIT: Aroma working perfectly here, as far as I can tell.
I am just curious. Can backups made on older version of TWRP be restored by this new version? Thanks.
chaibaby said:
I am just curious. Can backups made on older version of TWRP be restored by this new version? Thanks.
Click to expand...
Click to collapse
only one way to know, so try it and report back
wase4711 said:
only one way to know, so try it and report back
Click to expand...
Click to collapse
Will do when I am home later on tonight then report back.
chaibaby said:
I am just curious. Can backups made on older version of TWRP be restored by this new version? Thanks.
Click to expand...
Click to collapse
Usually, yes. I would backup up personal data onto PC before trying.

Categories

Resources