cyanoid v14 - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

good day devs...
i tried flashing cyanoid v14 yesterday...
1. flashed stock rom (v10j specifically)
2. rooted the rom
3. then install rom manager
4. downloaded cyanoid v14 through rom manager
5. install the rom
but my phone wont seem to boot...
done it several times but seems i got no luck...
any problem in what i did?
thanks in advance...

What do you mean, It didn't boot, I can flash the ROM perfectly on my phone??
Did you wipe data and cache before flashing the ROM?
Maybe @linuxxxx can help you

biomedgio said:
good day devs...
i tried flashing cyanoid v14 yesterday...
1. flashed stock rom (v10j specifically)
2. rooted the rom
3. then install rom manager
4. downloaded cyanoid v14 through rom manager
5. install the rom
but my phone wont seem to boot...
done it several times but seems i got no luck...
any problem in what i did?
thanks in advance...
Click to expand...
Click to collapse
Flash v10m not v10j
Inviato dal mio MI 2 utilizzando Tapatalk

it just boot on lg logo then the screen would flash then reboots agian to lg logo...
i will try flashing v10m rom... thanks...

biomedgio said:
it just boot on lg logo then the screen would flash then reboots agian to lg logo...
i will try flashing v10m rom... thanks...
Click to expand...
Click to collapse
guys ive tried flashing v10m... still same problem... maybe it's on my phone...

Related

Urgent! softbricked sgy duos!

hi... i flashed technoduos1.5 rom in my sgy duos...
the flashing went well but now the phone was stuck on boot logo!
i tried reflashing... all in vain
i tried flashing stock rom by odin3
it was stuck on boot.img for hours... so i had to quit!
now what should i do? i can access cwm and stock recovery... plz help me!
i hav also tried wipe data/dalvik/cache partition...
everything!
should i flash some other rom???
naman4797 said:
hi... i flashed technoduos1.5 rom in my sgy duos...
the flashing went well but now the phone was stuck on boot logo!
i tried reflashing... all in vain
i tried flashing stock rom by odin3
it was stuck on boot.img for hours... so i had to quit!
now what should i do? i can access cwm and stock recovery... plz help me!
i hav also tried wipe data/dalvik/cache partition...
everything!
should i flash some other rom???
Click to expand...
Click to collapse
download this
www.mediafire.com/?vv0do7u7pot1ykl this is stock firmware for our mobile.
Flash Via CWM as same as FlashCustom ROM,
Just Do This :
*.Put The Zip in Root SD
*.Go To Recovery Mode
*.Flash CWM
*.Mount All Partitioan
*.and Install Zip From SD
*.Choose Zip From SD
*.Reboot.
Let me know what you have done while flashing techno duos. I also flash it one time. And the same has happened with me. The problem is that kernal. Next time when you flash techno duos. Don't flash the kernal.
Hit thanks if i help you.
And remember, DON'T post question in the Dev Section again.
I'm just minding you
Edit: Ignore the above statements.
Sent from my little beast using Tapatalk 2
sonu_sonu said:
download this
www.mediafire.com/?vv0do7u7pot1ykl this is stock firmware for our mobile.
Flash Via CWM as same as FlashCustom ROM,
Just Do This :
*.Put The Zip in Root SD
*.Go To Recovery Mode
*.Flash CWM
*.Mount All Partitioan
*.and Install Zip From SD
*.Choose Zip From SD
*.Reboot.
Let me know what you have done while flashing techno duos. I also flash it one time. And the same has happened with me. The problem is that kernal. Next time when you flash techno
i already posted a question there... No reply since ages!
Click to expand...
Click to collapse
sonu_sonu said:
download this
www.mediafire.com/?vv0do7u7pot1ykl this is stock firmware for our mobile.
Flash Via CWM as same as FlashCustom ROM,
Just Do This :
*.Put The Zip in Root SD
*.Go To Recovery Mode
*.Flash CWM
*.Mount All Partitioan
*.and Install Zip From SD
*.Choose Zip From SD
*.Reboot.
Let me know what you have done while flashing techno duos. I also flash it one time. And the same has happened with me. The problem is that kernal. Next time when you flash techno duos. Don't flash the kernal.
Hit thanks if i help you.
Click to expand...
Click to collapse
Yesss... Thanks for ur reply! I now hav some confidence... And i flashed the bdsky kernel before the rom... So thats the problem?
naman4797 said:
Yesss... Thanks for ur reply! I now hav some confidence... And i flashed the bdsky kernel before the rom... So thats the problem?
Click to expand...
Click to collapse
You have to have to flash kernel before flashing technoduos 1.5 coz it does not support stock kernel...
N plz dont make thread in development section.:sly:
Sent from my GT-S6102 using xda premium
naman4797 said:
Yesss... Thanks for ur reply! I now hav some confidence... And i flashed the bdsky kernel before the rom... So thats the problem?
Click to expand...
Click to collapse
don't flash the kernal. Just flash the techno duos rom . It will work with stock rom also. Did you unbrick your mobile.
sonu_sonu said:
don't flash the kernal. Just flash the techno duos rom . It will work with stock rom also. Did you unbrick your mobile.
Click to expand...
Click to collapse
yeah maan! i unbricked it... i tried re flashing the rom but no effect... i googled a lot and found a way to revert to stock rom via odin... it gave some problems first... but when i restarted both phone amd pc it was successfuly flashed... i now am back to stock rom... alas... i should never try flashing roms now... but i hav already rooted the new stock rom... i cant live without root..

Touch doesn't work after installing CyanogenMod 10.1

Hey guys, after installing CM 10.1, my L5 touch doesn't work. CM boots and it seems everything was well installed. I had CM10 nightly, so I downgraded firmware, I then installed V20 with root, unloacked bootloader and recovery and installed CM10.1.
What should I do? :/
It happened to me twice.
You're doing the wrong format/flash or you're using corrupted rom
Format system, data & data/media, and cache.
I use a v10d kdz with unlocked bootloader and cwm included
Enviado desde mi LG-E612g
raul338 said:
It happened to me twice.
You're doing the wrong format/flash or you're using corrupted rom
Format system, data & data/media, and cache.
I use a v10d kdz with unlocked bootloader and cwm included
Enviado desde mi LG-E612g
Click to expand...
Click to collapse
I'm using V20C with root, bootloader and CWM 6.0.2.8. I'll try one more time then..
Sorry for double post but touch still doesn't work...
Bad luck
Interesting, one more user have had this problem. We could not find the solution, I remember it.
I'm sure I did everything the proper way. I used the official LG program to install my operators latest rom, which was V20A. Then I flashed V20C with root and unlocked bootloader and installed CWM 6.0.2.8.
In the recovery I did the 3 wipes and the partition format so I could install CM 10.1.
With V20A, V20C, CM10 and CM10.2 touch works! :/
With CM10.1 touch doesn't work and the operator card (service) also didn't work...
You must ask this Pecan. :good:
Did you flash v20 baseband?
Recovery touch work? Redowload and try again with full formats. Except external-sd
Enviado desde mi LG-P705 usando Tapatalk 2
weird can you send me kmsg while you touch screen please ? and also which l5 model you own ?
raul338 said:
Did you flash v20 baseband?
Click to expand...
Click to collapse
Yes, V20C with root..
Prometeo88 said:
Recovery touch work? Redowload and try again with full formats. Except external-sd
Enviado desde mi LG-P705 usando Tapatalk 2
Click to expand...
Click to collapse
I'm using recovery 6.0.2.8 (non-touch). I already did that but still nothing!
PecanCM said:
weird can you send me kmsg while you touch screen please ? and also which l5 model you own ?
Click to expand...
Click to collapse
How can I do that? I have LG L5 E610 (from a Portuguese operator)..
ks
its happened to me too you need to reboot device twice and its works
!
aidasaidas75 said:
its happened to me too you need to reboot device twice and its works
Click to expand...
Click to collapse
I've tried that but still nothing... no touch! And now CM 10.2, CM 10,1 and CM 10 neither of these touch works!
jpslvie said:
I've tried that but still nothing... no touch! And now CM 10.2, CM 10,1 and CM 10 neither of these touch works!
Click to expand...
Click to collapse
look like hardware issue now
PecanCM said:
look like hardware issue now
Click to expand...
Click to collapse
I'll install V20A to see if touch works or not. Thanks for the help people!
I just flashed clean V20C with root and touch works, so it isn't an hardware problem!
God, what should I do?! :/
jpslvie said:
I just flashed clean V20C with root and touch works, so it isn't an hardware problem!
God, what should I do?! :/
Click to expand...
Click to collapse
Maybe the kdz its corrupted... Happens some time
raul338 said:
Maybe the kdz its corrupted... Happens some time
Click to expand...
Click to collapse
It isn't corrupted, I've already checked. Weird bugs!
Guys, I just flashed V20C with root, unlocked bootloader as well as recovery. Then I installed the new CM10.1 beta 5 and touch and service already works! Finally!
battery out and reboot

[Q]Hassan ROM won't boot!

Hello,
i downloaded the Hassan ROM from here:
http://forum.xda-developers.com/showthread.php?t=2662583
And after installing it from the CWM (the required version) i booted the device
and it is stuck on the SAMSUNG logo and wont boot up.
What can i do to fix that i really want this rom.
for now ill flash a stock rom via odin untill ill come up with a solution for that issue.
thanks for the help!
never mind i fixed it!
wow 79 views and no single answer \=
strange...
anyway i flashed a stock rom and then flashed the CWM again and installed the rom again and it worked.
(i dont know why but flashing the stock rom made it possible to install the Hassan rom, i tried to install the Hassan rom 3 times before flashing the stock)
_Fender_ said:
never mind i fixed it!
wow 79 views and no single answer \=
strange...
anyway i flashed a stock rom and then flashed the CWM again and installed the rom again and it worked.
(i dont know why but flashing the stock rom made it possible to install the Hassan rom, i tried to install the Hassan rom 3 times before flashing the stock)
Click to expand...
Click to collapse
I was in wrong thread.
Joku1981 said:
1. You dont post any details about what u were doing.
2. The people answer if they want, you cant force them.
3. If you expected faster answer... why u dont post ur problems in their correct thread if you are so interested for this ROM?
Click to expand...
Click to collapse
1. "i downloaded the Hassan ROM from here:
http://forum.xda-developers.com/show....php?t=2662583
And after installing it from the CWM (the required version) i booted the device
and it is stuck on the SAMSUNG logo and wont boot up.
What can i do to fix that i really want this rom.
for now ill flash a stock rom via odin untill ill come up with a solution for that issue.
thanks for the help!"
2. Ok but the forum is made to help people.
3.im a new user in xda forum i cant post in a developer thread. Great rule btw! realy great.

Need Help on Boot loader !!!

Hi All,
I m using indian version Redmi Note and recently i found a CM11 Rom on developer section and i flashed. Since i flashed this ROM my bootloader icon has changed to "para movilesdualsim". Normally it was MI logo. I am trying to get back to default Mi Bootloader, since flash many custom ROM as well as tried to reset my phone with SP Flash tool. But no luck, still i can see "para movilesdualsim" logo. Can any one help me in this !!!
Hi,
I had the same issue myself, you will need to to clean install of the latest miui ROM using cwm/Twrp.
Worked for me.
sudd1976 said:
Hi,
I had the same issue myself, you will need to to clean install of the latest miui ROM using cwm/Twrp.
Worked for me.
Click to expand...
Click to collapse
Can you please how did you do that ???... I m using CWM to flash new ROM. Everytime i do factory reset and wipe system, data and catch. But didnt work for me..!!!
Can you describe little more about your clean installation ?
karthicvkn said:
Can you please how did you do that ???... I m using CWM to flash new ROM. Everytime i do factory reset and wipe system, data and catch. But didnt work for me..!!!
Can you describe little more about your clean installation ?
Click to expand...
Click to collapse
Try this method it would help
http://en.miui.com/thread-49615-1-1.html
anwarsheriff said:
Try this method it would help
http://en.miui.com/thread-49615-1-1.html
Click to expand...
Click to collapse
I tried this method, It reset my rom not Bootloader.... Anyway thanks,
sudd1976, How do you did that on your mobile pls ?

Problem installing SOME AOSP Roms.

Hello everyone,
I installed AICP lollipop (5.1.1) and have been using it for a while (installed using TWRP 2.8.7.1) , but because of some bugs and glitches , I decided to switch , I've tested CloudyG3 which is also lollipop, and works just fine , but I wanted to install Resurrection Remix because its similar to AICP and probably have less bugs I guess (Plus I just want to change). But when I did try to flash the latest build (20150822) on my D802 , I got this error "E:error executing updater binary in zip '/sdcard/roms/Resurrection-Remix-LP-v5.5.4-20150822-D802.zip'" and then it says error flashing rom , says updating partition details and says done. And then nothing happens , I also tried LiquidSmooth which also gave the exact same error. It isn't a problem with the bootstack or anything because I can install other Lollipop roms , both 5.1.1 and 5.0.2 without any problems, but these are both giving these same errors.
I've tried to look around to find what could fix this issue and so far I've found one thread with the same problem , which unfortunately, was not applicable to my device.
Thanks for the help.
http://forum.xda-developers.com/one...or-executing-update-binary-zip-t3011533/page2
Try to reboot the recovery roght after you enter in recovery mode. You can do this in Twrp reboot tab. Than you should have no problem
Inviato dal mio LG-D802 utilizzando Tapatalk
paul89rulez said:
Try to reboot the recovery roght after you enter in recovery mode. You can do this in Twrp reboot tab. Than you should have no problem
Inviato dal mio LG-D802 utilizzando Tapatalk
Click to expand...
Click to collapse
Hey thanks for the reply , I'll give it a go and tell you how it went.
paul89rulez said:
Try to reboot the recovery roght after you enter in recovery mode. You can do this in Twrp reboot tab. Than you should have no problem
Inviato dal mio LG-D802 utilizzando Tapatalk
Click to expand...
Click to collapse
nope no luck , didn't help with any ROM , tried Liquid Smooth , Validus and Resurrection Remix.
Really weird ... why only some ROMs and not all Lollipop ROMs...
Anyway thanks a lot for the help...
Danish78 said:
nope no luck , didn't help with any ROM , tried Liquid Smooth , Validus and Resurrection Remix.
Really weird ... why only some ROMs and not all Lollipop ROMs...
Anyway thanks a lot for the help...
Click to expand...
Click to collapse
maybe you can try to reflash twrp again
RR is the only ROM that still needs the lokified bootstack. Just flash it and you're good to go.
MB525 said:
RR is the only ROM that still needs the lokified bootstack. Just flash it and you're good to go.
Click to expand...
Click to collapse
Lokified bootstack?
Don't know what that actually means , I just went the OTA route to LP and then rooted the phone. So I have LP bootstack , if I do flash Lokified bootstack , how do I go back to LP bootstack? (If it actually gets affected)
thanks a lot for the help tho.
EDIT: Couldn't find much on the topic , and I'm getting the same problem on Liquid Smooth (http://forum.xda-developers.com/lg-g2/development/rom-liquidsmooth-v4-0-lg-g2-t2948395) and Validus (http://forum.xda-developers.com/lg-g2/development/rom-gzr-validus-rom-official-t3007168). If the reason really is the bootstack then these should have the same "Lokified bootstack" as well.
I've also read that verifying the MD5 fixes this issue sometimes , but some of the ROMs don't have those , so how do I verify them?

Categories

Resources