Hey guys, after installing CM 10.1, my L5 touch doesn't work. CM boots and it seems everything was well installed. I had CM10 nightly, so I downgraded firmware, I then installed V20 with root, unloacked bootloader and recovery and installed CM10.1.
What should I do? :/
It happened to me twice.
You're doing the wrong format/flash or you're using corrupted rom
Format system, data & data/media, and cache.
I use a v10d kdz with unlocked bootloader and cwm included
Enviado desde mi LG-E612g
raul338 said:
It happened to me twice.
You're doing the wrong format/flash or you're using corrupted rom
Format system, data & data/media, and cache.
I use a v10d kdz with unlocked bootloader and cwm included
Enviado desde mi LG-E612g
Click to expand...
Click to collapse
I'm using V20C with root, bootloader and CWM 6.0.2.8. I'll try one more time then..
Sorry for double post but touch still doesn't work...
Bad luck
Interesting, one more user have had this problem. We could not find the solution, I remember it.
I'm sure I did everything the proper way. I used the official LG program to install my operators latest rom, which was V20A. Then I flashed V20C with root and unlocked bootloader and installed CWM 6.0.2.8.
In the recovery I did the 3 wipes and the partition format so I could install CM 10.1.
With V20A, V20C, CM10 and CM10.2 touch works! :/
With CM10.1 touch doesn't work and the operator card (service) also didn't work...
You must ask this Pecan. :good:
Did you flash v20 baseband?
Recovery touch work? Redowload and try again with full formats. Except external-sd
Enviado desde mi LG-P705 usando Tapatalk 2
weird can you send me kmsg while you touch screen please ? and also which l5 model you own ?
raul338 said:
Did you flash v20 baseband?
Click to expand...
Click to collapse
Yes, V20C with root..
Prometeo88 said:
Recovery touch work? Redowload and try again with full formats. Except external-sd
Enviado desde mi LG-P705 usando Tapatalk 2
Click to expand...
Click to collapse
I'm using recovery 6.0.2.8 (non-touch). I already did that but still nothing!
PecanCM said:
weird can you send me kmsg while you touch screen please ? and also which l5 model you own ?
Click to expand...
Click to collapse
How can I do that? I have LG L5 E610 (from a Portuguese operator)..
ks
its happened to me too you need to reboot device twice and its works
!
aidasaidas75 said:
its happened to me too you need to reboot device twice and its works
Click to expand...
Click to collapse
I've tried that but still nothing... no touch! And now CM 10.2, CM 10,1 and CM 10 neither of these touch works!
jpslvie said:
I've tried that but still nothing... no touch! And now CM 10.2, CM 10,1 and CM 10 neither of these touch works!
Click to expand...
Click to collapse
look like hardware issue now
PecanCM said:
look like hardware issue now
Click to expand...
Click to collapse
I'll install V20A to see if touch works or not. Thanks for the help people!
I just flashed clean V20C with root and touch works, so it isn't an hardware problem!
God, what should I do?! :/
jpslvie said:
I just flashed clean V20C with root and touch works, so it isn't an hardware problem!
God, what should I do?! :/
Click to expand...
Click to collapse
Maybe the kdz its corrupted... Happens some time
raul338 said:
Maybe the kdz its corrupted... Happens some time
Click to expand...
Click to collapse
It isn't corrupted, I've already checked. Weird bugs!
Guys, I just flashed V20C with root, unlocked bootloader as well as recovery. Then I installed the new CM10.1 beta 5 and touch and service already works! Finally!
battery out and reboot
Related
Hi guys. Last night I tried to unlock my E610 bootloader, flashing recovery and eventually flashing with new ROm, but after I followed the steps for unlocking - I got a problem. My phone restarts after every Multimedia scanning. Although I can get to Recovery menu. I can put custom ROM in my SD Card and eventually flash it by Recovery menu, but would it fix rebooting the phone? And if it is - how to do that.
Please, I need your help!
p.s. I didn't make stock bootloader backup
PharrellVP said:
Hi guys. Last night I tried to unlock my E610 bootloader, flashing recovery and eventually flashing with new ROm, but after I followed the steps for unlocking - I got a problem. My phone restarts after every Multimedia scanning. Although I can get to Recovery menu. I can put custom ROM in my SD Card and eventually flash it by Recovery menu, but would it fix rebooting the phone? And if it is - how to do that.
Please, I need your help!
p.s. I didn't make stock bootloader backup
Click to expand...
Click to collapse
re-install CWM from here
then reflash your custom rom!
you should solve reboot problem, by the way this problem is very discussed in this forums!
michelone123 said:
re-install CWM from here
then reflash your custom rom!
you should solve reboot problem, by the way this problem is very discussed in this forums!
Click to expand...
Click to collapse
I hope to reflash recovery for a couple of minutes. Thanks anyway. I'll post if it works.
I tried to flash it again, but it doesn't worked. It still reboots. What should I do now?
R: [Q] LG Optimus L5 E610 reboots bootloader
Maybe you just installed a wrong versione, ensure your device model si correct and try again, e610, e612 ha ve different files 4 ex
Sent from my LG-E610 using xda app-developers app
Me too.
Hi guys, yesterday I have instaled the CM10 in the my lg e612f, now he just reboot after 3-5 minutes, I follow this tutorial: http://forum.xda-developers.com/showthread.php?t=2186161, someone can help me?
Sorry for my english , I know the rules, I unknow the english.
froeder32 said:
Hi guys, yesterday I have instaled the CM10 in the my lg e612f, now he just reboot after 3-5 minutes, I follow this tutorial: http://forum.xda-developers.com/showthread.php?t=2186161, someone can help me?
Sorry for my english , I know the rules, I unknow the english.
Click to expand...
Click to collapse
Did you used the e612 unlock method? It should work... else i will add another unlock method for e612.
Sent from my LG-E610 using xda premium
dev-DaT said:
Did you used the e612 unlock method? It should work... else i will add another unlock method for e612.
Sent from my LG-E610 using xda premium
Click to expand...
Click to collapse
Yes, i'm used the e612 unlock method, what i can make ?
maybe you really miss something...guides are perfectly and clearly written...go to development section and read some specific thread, you'll find any answer!!
froeder32 said:
Yes, i'm used the e612 unlock method, what i can make ?
Click to expand...
Click to collapse
I added another bootloader for the e612 & e615 and removed the old one. You can unlock bootloader
With the same method as the e610.
Sent from my LG-E610 using xda premium
Problem solved. Thank you all
PharrellVP said:
Problem solved. Thank you all
Click to expand...
Click to collapse
Can you please explain how you solved it?
I have a e612f with the same problem.
I did the same commands but with other bootloaders and recovery. I think it is previous version of the bootloader. I can send you, if you want. Also now I have a backup of stock bootloader, if someone need it.
Tonight I can put the in here, if you want.
PharrellVP said:
I did the same commands but with other bootloaders and recovery. I think it is previous version of the bootloader. I can send you, if you want. Also now I have a backup of stock bootloader, if someone need it.
Tonight I can put the in here, if you want.
Click to expand...
Click to collapse
you unlock a e612f? with wich bootloader?
No, I unlocked E610.
i did the unlock with the file for the 612 but it keep restarting
my LG is the e612g..
any help? for unlock the L5 e612g?
My problem looks like this:I have installed custom ROM on my LG L5 i think its mod of stock 20c (not sure) it work very gd,it has OC kernel on 1Ghz and its very fast and smooth.Battery life is better then the stock.In settings/about phone it says JB 4.1.2.What happend:I tried to install chainfire 3D and suddenly i lost Super User permisions and my phone restarted it self.After 2 hrs of war i managed to get into download mode n usin KDZ i flashed stock firmware or i tought it was a stock ICS.Well its not.It stayed on JB 4.1.2 and i cant get into recovery.Tried to root it but no luck.I cant use Titanium Backup to make few backups and to try to flash it again.Any help from here?Readin the posts on this topic it looks similar to my problem i cant get into recovery,cant root my phone.... -.-
Does anybody know how can I backup my stock bootloader? I want to unlock my bootloader, but since I keep seeing problems with random rebooting afterwards, I would like to do some preparations in case something goes wrong... Also, I read tons of explanations how to solve that problem, but I'm still not sure if I'd be able to do it...
I tried several times to install CM 11 to my LG G2
I have twrp 2.6.3.4
The flash of the Rom is correct, the gapps too
but when my phone in on, I have several bugs:
android process, clavier,... stopped and I was obliged to restore my phone
An Idea ?
I tried to install the CM 10.2 stable with the same Twrp, and the flash is refused ....
Try installing it with CWM instead of TWRP. Everything I've read has said CM and TWRP don't play nice together on the G2.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM.
Impossible to install an other recovery ....
I have followed this tuto:
http://www.phonandroid.com/forum/in...-philz-touch-versions-lg-g2-d-802-t76945.html
Do you have another method ?
Thanks
jclm73 said:
Impossible to install an other recovery ....
I have followed this tuto:
http://www.phonandroid.com/forum/in...-philz-touch-versions-lg-g2-d-802-t76945.html
Do you have another method ?
Thanks
Click to expand...
Click to collapse
Try Philz custom recovery in Original android development forum it works with CM Roms .....
Thanks
it's the same method I give above in french
it doesn't work
installation failed ....
I've checked the loki ....
jclm73 said:
Thanks
it's the same method I give above in french
it doesn't work
installation failed ....
I've checked the loki ....
Click to expand...
Click to collapse
Try using 2.6.3.3. I have yet to move to .4 and I've had no issues flashing.
Many people are having problems with .4
Sent from my LG-G2 using xda app-developers app
Can you give me a link which explains how to do ?
Thanks
Envoyé de mon LG-D802 en utilisant Tapatalk
Vepaot said:
Try installing it with CWM instead of TWRP. Everything I've read has said CM and TWRP don't play nice together on the G2.
Click to expand...
Click to collapse
I've had trouble with other KK ROMs as well.
jclm73 said:
Can you give me a link which explains how to do ?
Thanks
Envoyé de mon LG-D802 en utilisant Tapatalk[/QUOTE:crying:]
Really try Philz recovery in Original for cm11 a lot of ppl have same prob with twrp idk why.....just download Philz then go to recovery then wipe cache and davlik then install philz the wipe cache and davlik again....wiping cache and davlik prob isn't needed but a habit for me can't hurt then....when finished reboot!
---------- Post added at 02:13 PM ---------- Previous post was at 02:11 PM ----------
And you prob already know but to install ROM wipe system,data,cache and davlik the install ROM then gapps then wipe cache and davlik again and reboot!
Click to expand...
Click to collapse
jclm73 said:
Can you give me a link which explains how to do ?
Thanks
Envoyé de mon LG-D802 en utilisant Tapatalk
Click to expand...
Click to collapse
I was under the impression all you needed to do was go into twrp and flash the 2.6.3.3 zip. Same way you update to a newer version
Sent from my Vs980
Lawlrus said:
I was under the impression all you needed to do was go into twrp and flash the 2.6.3.3 zip. Same way you update to a newer version
Sent from my Vs980
Click to expand...
Click to collapse
Just seems like more ppl have had success without any hiccups with Philz recovery but 3.3 supports 4.4 as well ...so try either one
Thanks to help me to find THE solution
It was the TWRP 2.6.3.4 which has a problem !
I have replace it by TWRP 2.6.3.3 and all is OK !....:laugh:
I think this issue ought to be known but I don't know where give this feed back ...
May be, you know better than me where give this information ?......
jclm73 said:
Thanks to help me to find THE solution
It was the TWRP 2.6.3.4 which has a problem !
I have replace it by TWRP 2.6.3.3 and all is OK !....:laugh:
I think this issue ought to be known but I don't know where give this feed back ...
May be, you know better than me where give this information ?......
Click to expand...
Click to collapse
Where did u get the zip for 2.6.3.3
?? Thanks
Sent from my LG-D800 using xda app-developers app
This is the thread
http://forum.xda-developers.com/showthread.php?t=2449670 :good:
No idea either where to put it. I just state that people should roll back one person at a time as I did here.
Helping people one person at a time is still helping haha. Would be nice to get a sticky or something until it is resolved though.
Sent from my Vs980
Be carefull !
with the Twrp, it's impossible to make a back-up ==> obliged to install the recovery Philz .....
But it's imcompatible with Kitkat !.....
I'll put my self the feed-back in the right thread !....:angel:
I have twrp 2.6.3.4 aswell and for some reason i cant install cm10.2, only cm11 nightly... But after install gapps and cm11, auto hide softkeys doesnt hide the keys, already desinstalled but still doesnt hide them. On stock LG g2 rooted used to work just fine
primary_lotus said:
I have twrp 2.6.3.4 aswell and for some reason i cant install cm10.2, only cm11 nightly... But after install gapps and cm11, auto hide softkeys doesnt hide the keys, already desinstalled but still doesnt hide them. On stock LG g2 rooted used to work just fine
Click to expand...
Click to collapse
I had the same problem
to install CM 10.2 (very well for me), I have modified my recovery: Twrp ==> Philz recovery
and then, all is OK and I could do my back-ups
jclm73 said:
I had the same problem
to install CM 10.2 (very well for me), I have modified my recovery: Twrp ==> Philz recovery
and then, all is OK and I could do my back-ups
Click to expand...
Click to collapse
Is it possible to replace Twrp with philz recovery ? is it rly worth changing ? i would prefer to install cm10 yes but dont know if its worth changing.
You simply flash the zip of Philz recovery with your actuel recovery
Very easy !
Envoyé de mon LG-D802 en utilisant Tapatalk
Hi All,
I m using indian version Redmi Note and recently i found a CM11 Rom on developer section and i flashed. Since i flashed this ROM my bootloader icon has changed to "para movilesdualsim". Normally it was MI logo. I am trying to get back to default Mi Bootloader, since flash many custom ROM as well as tried to reset my phone with SP Flash tool. But no luck, still i can see "para movilesdualsim" logo. Can any one help me in this !!!
Hi,
I had the same issue myself, you will need to to clean install of the latest miui ROM using cwm/Twrp.
Worked for me.
sudd1976 said:
Hi,
I had the same issue myself, you will need to to clean install of the latest miui ROM using cwm/Twrp.
Worked for me.
Click to expand...
Click to collapse
Can you please how did you do that ???... I m using CWM to flash new ROM. Everytime i do factory reset and wipe system, data and catch. But didnt work for me..!!!
Can you describe little more about your clean installation ?
karthicvkn said:
Can you please how did you do that ???... I m using CWM to flash new ROM. Everytime i do factory reset and wipe system, data and catch. But didnt work for me..!!!
Can you describe little more about your clean installation ?
Click to expand...
Click to collapse
Try this method it would help
http://en.miui.com/thread-49615-1-1.html
anwarsheriff said:
Try this method it would help
http://en.miui.com/thread-49615-1-1.html
Click to expand...
Click to collapse
I tried this method, It reset my rom not Bootloader.... Anyway thanks,
sudd1976, How do you did that on your mobile pls ?
Direct download
Download page with all nightlies
For now, there is no network on XT1033.
Do you tested if everything works ?
Eurofighter_ty said:
Do you tested if everything works ?
Click to expand...
Click to collapse
No, not yet
We need XT1033 testers.
I always get stuck at cyanogenmod logo!
Any one else stuck?
zpmarcos said:
I always get stuck at cyanogenmod logo!
Any one else stuck?
Click to expand...
Click to collapse
Just wait. It took 5 minutes for the first boot
zpmarcos said:
I always get stuck at cyanogenmod logo!
Any one else stuck?
Click to expand...
Click to collapse
Tried it twice and got stuck at the Logo at both times. I got it working finally after flashing it over cm11.
ohn42 said:
Just wait. It took 5 minutes for the first boot
Click to expand...
Click to collapse
SaurabhSandav said:
Tried it twice and got stuck at the Logo at both times. I got it working finally after flashing it over cm11.
Click to expand...
Click to collapse
what recovery are you guys using?
Can you please tell me the procedure? What should I wipe?
zpmarcos said:
what recovery are you guys using?
Can you please tell me the procedure? What should I wipe?
Click to expand...
Click to collapse
I am using TWRP. I just flashed cm11 using the general procedure ( Wiping and flashing the zip ) and then I flashed cm12 over it without wiping the device.
Xt1032, latest twrp, bootloop.
SaurabhSandav said:
I am using TWRP. I just flashed cm11 using the general procedure ( Wiping and flashing the zip ) and then I flashed cm12 over it without wiping the device.
Click to expand...
Click to collapse
what TWRP version? sorry but Im stuck :/
zpmarcos said:
what TWRP version? sorry but Im stuck :/
Click to expand...
Click to collapse
TWRP 2.8.3.0
I have copied the zip into cmupdater-folder and updated via Update-function in CM11. After rebooting (need to wait 5 minutes) you need to install 5.0 gapps (I used PA pico).
works fine so far
sim card is not working on xt1033 but hotspot is working
any working recovery for moto g gpe 5.0.1..? so that we can try this this rom..
ohn42 said:
I have copied the zip into cmupdater-folder and updated via Update-function in CM11. After rebooting (need to wait 5 minutes) you need to install 5.0 gapps (I used PA pico).
works fine so far
Click to expand...
Click to collapse
Thank you sir, you are the man!
Worked for me after 3 hours trying hahaha
I can't flash it error in TWRP E: can't mount /system. Any solution??
Is dual sim working or not
Tap-a-talked from the MOTOG
Flashed with philz,works like a charm,stablest ROM for moto g.
xt1033 sim card not working
I tested the cm12 official version for xt1033.The sim card is not working ...If anyone else flashed it and its working please post a reply....
Hey guys ?
Can anyone help me with this?
My device, LG L7 P705 went bootloop/soft-brick after an accidental factory reset while running with cm-11 By Cyanhacker
The very reason is first, while i was using the custom rom, there was this "android has stopped working......" and so, when I proceeded to cwm recovery, I accidentally did a factory reset which I should have not done on cm roms. Since then, I couldn't even go to cwm recovery.
I have tried flashing stock rom V20B using the kdz updater and it said, it has successfully flashed the firmware I wanted but it stuck into boot animation.
Can anyone help me?
Thank you in advance guys!
Here's a screenshot during the flashing.
Joel Asignar said:
Hey guys ?
Can anyone help me with this?
My device, LG L7 P705 went bootloop/soft-brick after an accidental factory reset while running with cm-11 By Cyanhacker
The very reason is first, while i was using the custom rom, there was this "android has stopped working......" and so, when I proceeded to cwm recovery, I accidentally did a factory reset which I should have not done on cm roms. Since then, I couldn't even go to cwm recovery.
I have tried flashing stock rom V20B using the kdz updater and it said, it has successfully flashed the firmware I wanted but it stuck into boot animation.
Can anyone help me?
Thank you in advance guys!
Here's a screenshot during the flashing.
Click to expand...
Click to collapse
yes, wait 5 mins
Paget96 said:
yes, wait 5 mins
Click to expand...
Click to collapse
Thanks man!
Joel Asignar said:
Thanks man!
Click to expand...
Click to collapse
you have kdz????
flash this
https://disk.yandex.com/public/?hash=dqVNYlyXJYcyFKGnrD3C+052iazaQYnTr6mWL4aWxHs=&locale=ru
this is V20 rom, with root, unlocked bootloader and CWM...
Paget96 said:
you have kdz????
flash this
https://disk.yandex.com/public/?hash=dqVNYlyXJYcyFKGnrD3C+052iazaQYnTr6mWL4aWxHs=&locale=ru
this is V20 rom, with root, unlocked bootloader and CWM...
Click to expand...
Click to collapse
Yes, I have the kdz updater ,.
I'll try this tomorrow man. I have slow internet connection tonight..
Well, I hope this works perfectly .
Thanks a lot man!
Joel Asignar said:
Yes, I have the kdz updater ,.
I'll try this tomorrow man. I have slow internet connection tonight..
Well, I hope this works perfectly .
Thanks a lot man!
Click to expand...
Click to collapse
yes this work perfectly...but,but,but this rom is for P700,because there is no for P705..
after you flash this rom with kdz.
install CWM for P705 from IMERs CM11 thread,and flash custom rom for P705, because you will get battery drain from NFC.
I do same when buy this device trust me
Paget96 said:
yes this work perfectly...but,but,but this rom is for P700,because there is no for P705..
after you flash this rom with kdz.
install CWM for P705 from IMERs CM11 thread,and flash custom rom for P705, because you will get battery drain from NFC.
I do same when buy this device trust me
Click to expand...
Click to collapse
So, do I still use the option type 3GQCT and phone mode DIAG?
Joel Asignar said:
So, do I still use the option type 3GQCT and phone mode DIAG?
Click to expand...
Click to collapse
Uff, I can't remember what is all in KDZ. 3GQCT and phone mode emergency
Paget96 said:
Uff, I can't remember what is all in KDZ. 3GQCT and phone mode emergency
Click to expand...
Click to collapse
Dude, I haven't tried yet the kdz file that you recommended. I just did the flashing through Lg Mobile Support Tool . And when I did it, this is what I got.
and everytime I press the buttons to proceed to recovery mode and hard reset, I get into emergency mode..
You got any idea how to unbrick this?
Joel Asignar said:
Dude, I haven't tried yet the kdz file that you recommended. I just did the flashing through Lg Mobile Support Tool . And when I did it, this is what I got.
and everytime I press the buttons to proceed to recovery mode and hard reset, I get into emergency mode..
You got any idea how to unbrick this?
Click to expand...
Click to collapse
I never use support tool.
Here is full Guide for zip which I gave you. This is youtube link, follow guide.
http://www.youtube.com/watch?v=oYvToUFiEKI
Paget96 said:
I never use support tool.
Here is full Guide for zip which I gave you. This is youtube link, follow guide.
http://www.youtube.com/watch?v=oYvToUFiEKI
Click to expand...
Click to collapse
Hey dude. Just unbricked my L7.
I just did a hard reset and it was really a "hard reset" because it was so hard to do that.
Well, anyway, thanks for the help dude.
Now, my problem is its baseband. my phone has lost signal/network signal though it reads my sim card..
can you help?
Joel Asignar said:
Hey dude. Just unbricked my L7.
I just did a hard reset and it was really a "hard reset" because it was so hard to do that.
Well, anyway, thanks for the help dude.
Now, my problem is its baseband. my phone has lost signal/network signal though it reads my sim card..
can you help?
Click to expand...
Click to collapse
Just a moment.
Sent from my SAMSUNG-SM-G900A
Joel Asignar said:
Hey dude. Just unbricked my L7.
I just did a hard reset and it was really a "hard reset" because it was so hard to do that.
Well, anyway, thanks for the help dude.
Now, my problem is its baseband. my phone has lost signal/network signal though it reads my sim card..
can you help?
Click to expand...
Click to collapse
Try tp flash new baseband. search on google. Lg L7 basebands, sorry I don't have time now to give you a link, sorry,sorry,sorry
Hai bro i just have same problem with you, can you show me how to really hard reset you mean?