[Q] NEED HELP! Soft-brick L7 P705 - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Hey guys ?
Can anyone help me with this?
My device, LG L7 P705 went bootloop/soft-brick after an accidental factory reset while running with cm-11 By Cyanhacker
The very reason is first, while i was using the custom rom, there was this "android has stopped working......" and so, when I proceeded to cwm recovery, I accidentally did a factory reset which I should have not done on cm roms. Since then, I couldn't even go to cwm recovery.
I have tried flashing stock rom V20B using the kdz updater and it said, it has successfully flashed the firmware I wanted but it stuck into boot animation.
Can anyone help me?
Thank you in advance guys!
Here's a screenshot during the flashing.

Joel Asignar said:
Hey guys ?
Can anyone help me with this?
My device, LG L7 P705 went bootloop/soft-brick after an accidental factory reset while running with cm-11 By Cyanhacker
The very reason is first, while i was using the custom rom, there was this "android has stopped working......" and so, when I proceeded to cwm recovery, I accidentally did a factory reset which I should have not done on cm roms. Since then, I couldn't even go to cwm recovery.
I have tried flashing stock rom V20B using the kdz updater and it said, it has successfully flashed the firmware I wanted but it stuck into boot animation.
Can anyone help me?
Thank you in advance guys!
Here's a screenshot during the flashing.
Click to expand...
Click to collapse
yes, wait 5 mins

Paget96 said:
yes, wait 5 mins
Click to expand...
Click to collapse
Thanks man!

Joel Asignar said:
Thanks man!
Click to expand...
Click to collapse
you have kdz????
flash this
https://disk.yandex.com/public/?hash=dqVNYlyXJYcyFKGnrD3C+052iazaQYnTr6mWL4aWxHs=&locale=ru
this is V20 rom, with root, unlocked bootloader and CWM...

Paget96 said:
you have kdz????
flash this
https://disk.yandex.com/public/?hash=dqVNYlyXJYcyFKGnrD3C+052iazaQYnTr6mWL4aWxHs=&locale=ru
this is V20 rom, with root, unlocked bootloader and CWM...
Click to expand...
Click to collapse
Yes, I have the kdz updater ,.
I'll try this tomorrow man. I have slow internet connection tonight..
Well, I hope this works perfectly .
Thanks a lot man!

Joel Asignar said:
Yes, I have the kdz updater ,.
I'll try this tomorrow man. I have slow internet connection tonight..
Well, I hope this works perfectly .
Thanks a lot man!
Click to expand...
Click to collapse
yes this work perfectly...but,but,but this rom is for P700,because there is no for P705..
after you flash this rom with kdz.
install CWM for P705 from IMERs CM11 thread,and flash custom rom for P705, because you will get battery drain from NFC.
I do same when buy this device trust me

Paget96 said:
yes this work perfectly...but,but,but this rom is for P700,because there is no for P705..
after you flash this rom with kdz.
install CWM for P705 from IMERs CM11 thread,and flash custom rom for P705, because you will get battery drain from NFC.
I do same when buy this device trust me
Click to expand...
Click to collapse
So, do I still use the option type 3GQCT and phone mode DIAG?

Joel Asignar said:
So, do I still use the option type 3GQCT and phone mode DIAG?
Click to expand...
Click to collapse
Uff, I can't remember what is all in KDZ. 3GQCT and phone mode emergency

Paget96 said:
Uff, I can't remember what is all in KDZ. 3GQCT and phone mode emergency
Click to expand...
Click to collapse
Dude, I haven't tried yet the kdz file that you recommended. I just did the flashing through Lg Mobile Support Tool . And when I did it, this is what I got.
and everytime I press the buttons to proceed to recovery mode and hard reset, I get into emergency mode..
You got any idea how to unbrick this?

Joel Asignar said:
Dude, I haven't tried yet the kdz file that you recommended. I just did the flashing through Lg Mobile Support Tool . And when I did it, this is what I got.
and everytime I press the buttons to proceed to recovery mode and hard reset, I get into emergency mode..
You got any idea how to unbrick this?
Click to expand...
Click to collapse
I never use support tool.
Here is full Guide for zip which I gave you. This is youtube link, follow guide.
http://www.youtube.com/watch?v=oYvToUFiEKI

Paget96 said:
I never use support tool.
Here is full Guide for zip which I gave you. This is youtube link, follow guide.
http://www.youtube.com/watch?v=oYvToUFiEKI
Click to expand...
Click to collapse
Hey dude. Just unbricked my L7.
I just did a hard reset and it was really a "hard reset" because it was so hard to do that.
Well, anyway, thanks for the help dude.
Now, my problem is its baseband. my phone has lost signal/network signal though it reads my sim card..
can you help?

Joel Asignar said:
Hey dude. Just unbricked my L7.
I just did a hard reset and it was really a "hard reset" because it was so hard to do that.
Well, anyway, thanks for the help dude.
Now, my problem is its baseband. my phone has lost signal/network signal though it reads my sim card..
can you help?
Click to expand...
Click to collapse
Just a moment.
Sent from my SAMSUNG-SM-G900A

Joel Asignar said:
Hey dude. Just unbricked my L7.
I just did a hard reset and it was really a "hard reset" because it was so hard to do that.
Well, anyway, thanks for the help dude.
Now, my problem is its baseband. my phone has lost signal/network signal though it reads my sim card..
can you help?
Click to expand...
Click to collapse
Try tp flash new baseband. search on google. Lg L7 basebands, sorry I don't have time now to give you a link, sorry,sorry,sorry

Hai bro i just have same problem with you, can you show me how to really hard reset you mean?

Related

[Q] LG Optimus L5 E610 reboots bootloader

Hi guys. Last night I tried to unlock my E610 bootloader, flashing recovery and eventually flashing with new ROm, but after I followed the steps for unlocking - I got a problem. My phone restarts after every Multimedia scanning. Although I can get to Recovery menu. I can put custom ROM in my SD Card and eventually flash it by Recovery menu, but would it fix rebooting the phone? And if it is - how to do that.
Please, I need your help!
p.s. I didn't make stock bootloader backup
PharrellVP said:
Hi guys. Last night I tried to unlock my E610 bootloader, flashing recovery and eventually flashing with new ROm, but after I followed the steps for unlocking - I got a problem. My phone restarts after every Multimedia scanning. Although I can get to Recovery menu. I can put custom ROM in my SD Card and eventually flash it by Recovery menu, but would it fix rebooting the phone? And if it is - how to do that.
Please, I need your help!
p.s. I didn't make stock bootloader backup
Click to expand...
Click to collapse
re-install CWM from here
then reflash your custom rom!
you should solve reboot problem, by the way this problem is very discussed in this forums!
michelone123 said:
re-install CWM from here
then reflash your custom rom!
you should solve reboot problem, by the way this problem is very discussed in this forums!
Click to expand...
Click to collapse
I hope to reflash recovery for a couple of minutes. Thanks anyway. I'll post if it works.
I tried to flash it again, but it doesn't worked. It still reboots. What should I do now?
R: [Q] LG Optimus L5 E610 reboots bootloader
Maybe you just installed a wrong versione, ensure your device model si correct and try again, e610, e612 ha ve different files 4 ex
Sent from my LG-E610 using xda app-developers app
Me too.
Hi guys, yesterday I have instaled the CM10 in the my lg e612f, now he just reboot after 3-5 minutes, I follow this tutorial: http://forum.xda-developers.com/showthread.php?t=2186161, someone can help me?
Sorry for my english , I know the rules, I unknow the english.
froeder32 said:
Hi guys, yesterday I have instaled the CM10 in the my lg e612f, now he just reboot after 3-5 minutes, I follow this tutorial: http://forum.xda-developers.com/showthread.php?t=2186161, someone can help me?
Sorry for my english , I know the rules, I unknow the english.
Click to expand...
Click to collapse
Did you used the e612 unlock method? It should work... else i will add another unlock method for e612.
Sent from my LG-E610 using xda premium
dev-DaT said:
Did you used the e612 unlock method? It should work... else i will add another unlock method for e612.
Sent from my LG-E610 using xda premium
Click to expand...
Click to collapse
Yes, i'm used the e612 unlock method, what i can make ?
maybe you really miss something...guides are perfectly and clearly written...go to development section and read some specific thread, you'll find any answer!!
froeder32 said:
Yes, i'm used the e612 unlock method, what i can make ?
Click to expand...
Click to collapse
I added another bootloader for the e612 & e615 and removed the old one. You can unlock bootloader
With the same method as the e610.
Sent from my LG-E610 using xda premium
Problem solved. Thank you all
PharrellVP said:
Problem solved. Thank you all
Click to expand...
Click to collapse
Can you please explain how you solved it?
I have a e612f with the same problem.
I did the same commands but with other bootloaders and recovery. I think it is previous version of the bootloader. I can send you, if you want. Also now I have a backup of stock bootloader, if someone need it.
Tonight I can put the in here, if you want.
PharrellVP said:
I did the same commands but with other bootloaders and recovery. I think it is previous version of the bootloader. I can send you, if you want. Also now I have a backup of stock bootloader, if someone need it.
Tonight I can put the in here, if you want.
Click to expand...
Click to collapse
you unlock a e612f? with wich bootloader?
No, I unlocked E610.
i did the unlock with the file for the 612 but it keep restarting
my LG is the e612g..
any help? for unlock the L5 e612g?
My problem looks like this:I have installed custom ROM on my LG L5 i think its mod of stock 20c (not sure) it work very gd,it has OC kernel on 1Ghz and its very fast and smooth.Battery life is better then the stock.In settings/about phone it says JB 4.1.2.What happend:I tried to install chainfire 3D and suddenly i lost Super User permisions and my phone restarted it self.After 2 hrs of war i managed to get into download mode n usin KDZ i flashed stock firmware or i tought it was a stock ICS.Well its not.It stayed on JB 4.1.2 and i cant get into recovery.Tried to root it but no luck.I cant use Titanium Backup to make few backups and to try to flash it again.Any help from here?Readin the posts on this topic it looks similar to my problem i cant get into recovery,cant root my phone.... -.-
Does anybody know how can I backup my stock bootloader? I want to unlock my bootloader, but since I keep seeing problems with random rebooting afterwards, I would like to do some preparations in case something goes wrong... Also, I read tons of explanations how to solve that problem, but I'm still not sure if I'd be able to do it...

[Q] Help needed *L5*

Hello,
So I followed this thread http://forum.xda-developers.com/showthread.php?t=2519448 and installed cyanogenmod11 (unofficial) to my Optimus L5
Now when I try to start it it'll get stuck at boot.
I kinda don't know how to fix this, can any1 help ?
Thanks in case.
If you havent, flash v20 baseband then do the same again, wipe everything and flash again, it has to work
thanks
ddjonko said:
If you havent, flash v20 baseband then do the same again, wipe everything and flash again, it has to work
Click to expand...
Click to collapse
Thanks for reply ddjonko, but v20b isn't coming with cwm so i have to install cwm separetly - which is not working.. (i'm noob on such things) 'kinda' ..
Thanks again !
Yay!!
Got it fixed Superb big thanks to ddjonko !!!
No problem mate, enjoy

urgent help

lg g2-d802
twrp-2.6.3.2
im on paradus hd rom 4.2.2 and i put a flex 1.5 zip file on my device.
so i went to twrp to wipe the phone as always before i was flashing a new rom. this time wiping the phone failed i tried 3 times and it kept failing then i went to the install section in TWRP to find my zip file, but unfortunately there was noting no files at all.
i rebooted the phone and paradus started and pluged the phone in the computer and al the files were there. but in TWRP I could not find any file at all.
i hope someone can help me out
Update TWRP. .3.2 had some weird issues. Someone with a D802 might be able to tell you which one to update to.
Koopa777 said:
Update TWRP. .3.2 had some weird issues. Someone with a D802 might be able to tell you which one to update to.
Click to expand...
Click to collapse
hmm i dont know what your point is, but i believe that i have the latest twrp recovery and the person you are talking about how should i find him ..
abati said:
hmm i dont know what your point is, but i believe that i have the latest twrp recovery and the person you are talking about how should i find him ..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2472223
Koopa777 said:
http://forum.xda-developers.com/showthread.php?t=2472223
Click to expand...
Click to collapse
thnxx gonna try it out, and wil report
I flashed TWRP 2.6.3.3, and everything is working perfect ^^ thnx for the support m8 !
abati said:
I flashed TWRP 2.6.3.3, and everything is working perfect ^^ thnx for the support m8 !
Click to expand...
Click to collapse
No problem! Happy to help!

[Q] newbie question ! customer recovery for 4.4.2?

Hey guys,
I know this is kind of answered in alot of different places but nothing is guiding me to the correct files, just want to be safe and figured this was the best place to make sure i hit the bullseye.
Just updated to poland 4.4.2 kitkat and was looking to install a customer recovery so i could grab the latest version of xnote and a few other goodies. Could someone please guide me to a download section/link for cwm? or maybe twrp? which ever would work easiest
lofi01 said:
Hey guys,
I know this is kind of answered in alot of different places but nothing is guiding me to the correct files, just want to be safe and figured this was the best place to make sure i hit the bullseye.
Just updated to poland 4.4.2 kitkat and was looking to install a customer recovery so i could grab the latest version of xnote and a few other goodies. Could someone please guide me to a download section/link for cwm? or maybe twrp? which ever would work easiest
Click to expand...
Click to collapse
Here is a link for 4.4.2 flash it via Odin
https://www.dropbox.com/s/t6s4rfvz4sybxlk/n900-cwm-recovery-6.0.4.7-kk%280125%29.tar
bekasulaberidze said:
Here is a link for 4.4.2 flash it via Odin
https://www.dropbox.com/s/t6s4rfvz4sybxlk/n900-cwm-recovery-6.0.4.7-kk%280125%29.tar
Click to expand...
Click to collapse
i'm having alot of issues installing this ! loaded using odin PDA.. everything looks fine, phone then restarts and boots normally...odin says pass ! i try to jump into recovery and it's goes to download mode? Could the issue be because i have just updated from 4.3? i also had twrp installed on my phone
lofi01 said:
i'm having alot of issues installing this ! loaded using odin PDA.. everything looks fine, phone then restarts and boots normally...odin says pass ! i try to jump into recovery and it's goes to download mode? Could the issue be because i have just updated from 4.3? i also had twrp installed on my phone
Click to expand...
Click to collapse
you are using volume up button yes ?
bekasulaberidze said:
you are using volume up button yes ?
Click to expand...
Click to collapse
yep reads normal booting into recovery then just dumps into download mode "could not boot normally" reads at the top of of the screen
lofi01 said:
yep reads normal booting into recovery then just dumps into download mode "could not boot normally" reads at the top of of the screen
Click to expand...
Click to collapse
You have to factory reset..
bekasulaberidze said:
You have to factory reset..
Click to expand...
Click to collapse
think i will have to reinstall the firmware to do that because factory recovery is gone as well.. unless i can factory reset anther way? that being said what is a good alternative firmware maybe the poland 4.4.2 is the issue?
lofi01 said:
think i will have to reinstall the firmware to do that because factory recovery is gone as well.. unless i can factory reset anther way? that being said what is a good alternative firmware maybe the poland 4.4.2 is the issue?
Click to expand...
Click to collapse
Yes reset it with Odin, you have n900 ? try Russian firmware, after successfully reset make a factory reset from recovery, than root and flash custom recovery
would twrp 2.6.3.7 work on 4.4?
bekasulaberidze said:
Yes reset it with Odin, you have n900 ? try Russian firmware, after successfully reset make a factory reset from recovery, than root and flash custom recovery
Click to expand...
Click to collapse
nope n9005
lofi01 said:
nope n9005
Click to expand...
Click to collapse
Try BTU
bekasulaberidze said:
Try BTU
Click to expand...
Click to collapse
http://d-h.st/zVa#comments
hmm after you mentioned if i had n9005 i tried the alternative version and success link above !! i'll test it out now and update ... Thanks for the brain storming mate it helped get to the issue
btw what is that option in cwm that keeps askig me ROM may flash stock recovery on boot? >No >Yes disable recovery flash.. i just say no because i don't know wat it is lol
lofi01 said:
http://d-h.st/zVa#comments
hmm after you mentioned if i had n9005 i tried the alternative version and success link above !! i'll test it out now and update ... Thanks for the brain storming mate it helped get to the issue
btw what is that option in cwm that keeps askig me ROM may flash stock recovery on boot? >No >Yes disable recovery flash.. i just say no because i don't know wat it is lol
Click to expand...
Click to collapse
Hit no because ROM is trying to install it's own-stock recovery :good:
bekasulaberidze said:
Hit no because ROM is trying to install it's own-stock recovery :good:
Click to expand...
Click to collapse
Perfect have xnote 13 up and running !! everything is working great now.. no need for reset at all i'm happy, thanks for the help
lofi01 said:
Perfect have xnote 13 up and running !! everything is working great now.. no need for reset at all i'm happy, thanks for the help
Click to expand...
Click to collapse
you're welcome !

Download OTA, bricked..

So, I instantly soft bricked my D802.. I am now in download mode, please can someone tell me how I get the stock software on my phone again? Please help me :crying:
I used to be you once...research before you do anything. im sure someone will be along to help shortly.
Dr.Molestratus said:
So, I instantly soft bricked my D802.. I am now in download mode, please can someone tell me how I get the stock software on my phone again? Please help me :crying:
Click to expand...
Click to collapse
What did you do exactly?
Coming from which rom? Installing which rom? How? Rooted Device? Custom Recovery?
Dr.Molestratus said:
So, I instantly soft bricked my D802.. I am now in download mode, please can someone tell me how I get the stock software on my phone again? Please help me :crying:
Click to expand...
Click to collapse
back to stock guide http://forum.xda-developers.com/showthread.php?t=2432476
XxZombiePikachu said:
back to stock guide http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
I'm following that right now. So when I click on "upgrade start" it takes me to LG MOBILE TOOL SUPPORT. And what am I supposed to then? I really need my phone to work right now. I'm sorry guys!
Dr.Molestratus said:
I'm following that right now. So when I click on "upgrade start" it takes me to LG MOBILE TOOL SUPPORT. And what am I supposed to then? I really need my phone to work right now. I'm sorry guys!
Click to expand...
Click to collapse
well something to select country should pop up, if first method does not work you can always try the second method
Holy **** this is sabotage. After I restarted my PC, I can no more go into download mode. If I sent it to LG and said something like the power cut while installing, would they accept it?
Nevermind.. It gets to the "downloading the file to upgrade" in the LG Mobile Support Tool, then it just stops, any help?
Anyone who has a fix?
Fixed! I downloaded the .tot for my D802 with the .DLL, worked smoothly!
Dr.Molestratus said:
Fixed! I downloaded the .tot for my D802 with the .DLL, worked smoothly!
Click to expand...
Click to collapse
Which thread did you use?

Categories

Resources