Once again i am here looking for help. I was flashing the stock firmware to my Note 3 via odin and something must have gone wrong. It said failed after writing some of the file to the device. Now i am in a soft brick with no recovery. I am only able to get into download mode. I have tried reflashing the firmware via odin but it fails after getting a failure to write error. Is is possible that the phone won't accept the file because maybe the usb debugging option was reset? Phone says this is read letters after the failed download. SWREV checkfail sb(1)fused 2> binary 1. If anyone has any ideas or a link that would help, i would greatly appreciate it.
Mostly fixed.
mcmilldew said:
Once again i am here looking for help. I was flashing the stock firmware to my Note 3 via odin and something must have gone wrong. It said failed after writing some of the file to the device. Now i am in a soft brick with no recovery. I am only able to get into download mode. I have tried reflashing the firmware via odin but it fails after getting a failure to write error. Is is possible that the phone won't accept the file because maybe the usb debugging option was reset? Phone says this is read letters after the failed download. SWREV checkfail sb(1)fused 2> binary 1. If anyone has any ideas or a link that would help, i would greatly appreciate it.
Click to expand...
Click to collapse
So was able to flash twrp via Odin and then reboot into recovery and flash my backup of CM11. But odin never wants to flash stock firmware for me. I like CM but i use the s pen to much so i wanted to go back to rooted stock. Any ideas on why odin isn't working for stock firmware? its still fails after a few seconds. Anyways atleast i have a usable phone for now.
mcmilldew said:
So was able to flash twrp via Odin and then reboot into recovery and flash my backup of CM11. But odin never wants to flash stock firmware for me. I like CM but i use the s pen to much so i wanted to go back to rooted stock. Any ideas on why odin isn't working for stock firmware? its still fails after a few seconds. Anyways atleast i have a usable phone for now.
Click to expand...
Click to collapse
1. You should give us the problem/failure message from Odin so we can read why.
2. You're on the wrong forum if you want N900T specific help.
3. You can always flash a new TW ROM from TWRP
mcmilldew said:
Once again i am here looking for help. I was flashing the stock firmware to my Note 3 via odin and something must have gone wrong. It said failed after writing some of the file to the device. Now i am in a soft brick with no recovery. I am only able to get into download mode. I have tried reflashing the firmware via odin but it fails after getting a failure to write error. Is is possible that the phone won't accept the file because maybe the usb debugging option was reset? Phone says this is read letters after the failed download. SWREV checkfail sb(1)fused 2> binary 1. If anyone has any ideas or a link that would help, i would greatly appreciate it.
Click to expand...
Click to collapse
"SWREV checkfail sb(1)fused 2> binary 1" usually means you are trying to downgrade something in a way that Samsung/T-Mobile does not want you to.
Most likely you need to download the latest firmware (and not the old one):
http://www.sammobile.com/firmwares/1/?model=SM-N900T&pcode=TMB#firmware
Related
Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
orchid18 said:
Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
Click to expand...
Click to collapse
Try another usb port (recommended: back of the computer)
and flash again via Odin stock base rom 4.3
P.S: I was getting the similar problem you have. another usb port helped me
Bordo_Bereli51 said:
Try another usb port (recommended: back of the computer)
and flash again via Odin stock base rom 4.3
Click to expand...
Click to collapse
Thanks Yeah I've tried that, I've tried front, back, on a laptop, but Odin still red fails at the writing 'System' (the largest 'chunk' of the tar.md5 file) no matter which 4.3 rom I try
I so upset :crying:
orchid18 said:
Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
Click to expand...
Click to collapse
Hello,
For my part, I also encountered problems! the only rom that is passed via ODIN after testing 5 other is:
I9505XXUAMDF_I9505PHNAMD8_PHN
But if Knox! possible that this does not happen either?
*************
For me I do:
1 - Flash with Odin Pit
2 - Flash with ODIN last recovery philz_touch_5.15.8-i9505.zip
3 - Wip full recovery for new rom
4 - Flash the I9505XXUAMDF_I9505PHNAMD8_PHN
And then this happened.
Alan-B said:
Hello,
For my part, I also encountered problems! the only rom that is passed via ODIN after testing 5 other is:
I9505XXUAMDF_I9505PHNAMD8_PHN
But if Knox! possible that this does not happen either?
Click to expand...
Click to collapse
I thought with the official 4.3 new bootloader, we cant downgrade to 4.2.2.
Try another Odin version or extract the .tar file via Winrar (rename it from .tar.md5 to .tar if your file ending at .tar.md5) and flash the system.img.ext4 via this tool http://forum.xda-developers.com/showthread.php?t=2333807 see if you getting error with this tool while flashing the system.img.ext4
and then try to flash again with odin
P.S. While flashing via Odin kill in Task Manager Kies and related process and flash again
Bordo_Bereli51 said:
I thought with the official 4.3 new bootloader, we cant downgrade to 4.2.2.
Try another Odin version or extract the .tar file via Winrar and flash the system.img.ext4 via this tool http://forum.xda-developers.com/showthread.php?t=2333807 see if you getting error with this tool while flashing the system.img.ext4
and then try to flash again with odin
P.S. While flashing via Odin kill in Task Manager Kies and related process and flash again
Click to expand...
Click to collapse
Hey Bordo
Thankyou so much for your suggestion - I will try the individual component flasher later tonight and then write back on what happens
I will also remember to kill Kies with task manager beforehand, before using ODIN or any other flasher :good:
Thankyou so much for your time and effort in trying to help!!!! Much appreciated
Hey guys!
When i boot my phone i get this error:
"firmware upgrade encountered an issue. please select recovery mode in kies and try again"
I can't flash access recovery or Android OS, and i can't flash from Odin (No PIT-partition error)
What to do???
I am almost panicking - my phone didn't work earlier today because of CWM, so i tried to flash TWRP from Odin, and now I am screwed again!!
It this fixable?
Please help me
Thanks in advance
First thing you need to do is stop panicing. That will only make things worse. If you start messing with your phone, then prepare yourself that these things happen.
Also, there is little usefull information in your thread. If you want help, I suggest you make more work of you topic. What rom were you on? What did you do with CWM? What version where you on? What version of TWRP?
Can't you just flash CWM again and then flash a custom rom? If not, then try:
1. Do you have knox enabled bootloader?
2. If so, then flash any stock rom with a knox bootloader.
3. If not, then flash a stock rom without a knox bootloader.
4. Root again and flash recovery again.
5. Flash custom rom.
re: odin flash
velein said:
Hey guys!
When i boot my phone i get this error:
"firmware upgrade encountered an issue. please select recovery mode in kies and try again"
I can't flash access recovery or Android OS, and i can't flash from Odin (No PIT-partition error)
What to do???
I am almost panicking - my phone didn't work earlier today because of CWM, so i tried to flash TWRP from Odin, and now I am screwed again!!
It this fixable?
Please help me
Thanks in advance
Click to expand...
Click to collapse
Be sure you have or get the official stock odin flash rom for your phone baseband/model
number from SamMobile.com. They only have official stock roms their with exact model
and basebands.
Make sure the battery is at least 50% charged.
Open odin and set it up so it's ready to flash.
Then remove the battery for 10 seconds & replace the battery then then hold/press the vol-down
and the power button at the same time until the phone is in download mode.
Connect the usb cable from computer to phone and then:
Be sure ODIN is ready to start, if it is then start the odin flash.
Have patience, after the flash it can take up to 4-5 minutes for
the phone to go thru the initial boot.
REMEMBER, only flash official and specific odin flash rom which is designed for
your phone's baseband and model number. Double check before flashing to be sure.
Also to avoid problems in the future, once you get your phone working properly
uninstall kies on your phone and in your computer.
Kies is really not required unless you plan to stay STOCK/UN-ROOTED and don't
plan to flash any custom roms, mod's, themes.
Good luck!
Solved it by using this guide:
http://forum.xda-developers.com/showthread.php?t=2265477
had to change to USB3.0-port before i could flash without getting an error.
Thanks for the help guys.
Hello, I am relatively inexperienced when it comes to flashing and have managed to brick my s5(rogers(SM-G900W8)canadian). I have looked around and it seems as though in order to get my phone to work I need a pit file for my phone. Problem is, I can't find one. If anyone could help it would be greatly appreciated. Thanks. by the way I have rooted and enabled usb debugging prior to being bricked
http://forum.xda-developers.com/attachment.php?attachmentid=2800218&d=1402859206
so that should work?
Well that's the PIT file for your model phone, whether or not it unbricks it depends on what you did to brick it
I bricked it by attempting to flash philz touch recovery in odin 3.09 and it failed. Now I have the message:"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." on my phone, I tried doing exactly that but kies detects my phone but never finishes loading it up. So I tried flashing the stock firmware for my device model and got the same issue I did when attempting to flash the recovery. As far as i know I didn't do anything wrong as i was very careful to select the right files, etc. but clearly I did.
Well you've got nothing to lose by trying the PIT file
Not flashed PIT before so read up on exactly how to do it first, this is the thread I got the link for your phone from
http://forum.xda-developers.com/showthread.php?t=2737448
Tried flashing the file and that failed as well... not looking too good.
I guess my phone's useless now.
Did you check the "Re-Partition" in ODIN?
Are you using the latest version of ODIN3 (3.10.6) ?
Try ODIN3 version 3.0.7 too
(Obviously) Got phone in download mode
Tried just flashing a stock ROM from sammobile
Tried flashing the stock ROM along with the PIT file & Stock ROM together?
tried it all, when trying to flash the pit file as well though it gives me "SECURE CHECK FAIL : PIT" on my phone. whenever I try to flash it it always fails at system.img.ext4 with Complete(Write) operation failed.
I think I know the issue now, I'm using VMware, which apparently doesn't work. Will try on a windows pc in a while. thanks
Ah right, yea always best from a native PC
Let us know if you get it working
It worked and then I installed the newest cyanogenmod.
My Galaxy s7 broke down and had to go back to my old galaxy s4, but I have a big problem or small, want to install this room but I can not install any recovery.
I tried everything in these last two days, stock rooms SamMobile, kernel's, TWRP, ROM Manager, philz Touch via odin .... via zip file ..... bootloader and modem .... pit files ... .pages and pages on xda ... different odin, cables.....everything
And always appears this error
E: footer is wrong
E: signature verification failed
If anyone can give help to fix this I am very appreciated, I want to install this room, but it's complicated
Thank you in advance
And sorry for my bad english
What is the phone's model number? The errors appear on Odin? What bootloader version is on the phone?
Galaxy S4
GT-I9505
4.4.2
I9505XXUGNJ8
bootloader .......where I see the bootloader?
audit13 said:
What is the phone's model number? The errors appear on Odin? What bootloader version is on the phone?
Click to expand...
Click to collapse
In the Odin no errors, everthing is ok
Galaxy s4
GT-I9505
4.4.2 stock room
i9505xxugnj8
where I see the bootloader?
Stock firmware firmware from Odin includes stock recovery.
Flash again with Odin by doing this: uncheck everything in Odin except f reset time, flash rom, when you see the word reset in the status window, remove USB cable from phone, remove battery for three seconds, replace battery, use buttons to boot directly to recovery, factory reset/wipe, reboot.
believe it or not I've done it in a post here on xda, I tried everything
different computers, even if the smartphone is original
Tiaguinho said:
believe it or not I've done it in a post here on xda, I tried everything
different computers, even if the smartphone is original
Click to expand...
Click to collapse
Is the phone rooted? Or can you root it?
If it is or you manage to root it, you should be able to flash a twrp.img file via Flashify.
yes, is rooted
GDReaper with Flashify I made it
finally yupiiiiiiiii
Thank you all for the great help, problem solved
thank you .... thank you, saved the day
thank you to all
My s7 edge got stuck at boot screen so i reflashed stock rom and rerooted then restored the backup i had, it said fail because of low memory while restoring the system and now when i try to reflash the stock rom on odin it says model dismatch fail.
If someone could help me fix this I'm willing to pay something decent, but not a whole lot lol
Re-download the stock rom and flash it
Meboyzram said:
Re-download the stock rom and flash it
Click to expand...
Click to collapse
i did that lol thats when it says "model dismatch fail"
Do you have custom recovery?
Do you have a custom recovery?
Do you have the right and the newest Odin Version?
Did you try it with another transfercable or USB-Port?
Do you have the newest samsung drivers?
Did you have any Odin problems like this before?
My suggestion:
Just do a full wipe on your phone. Downlad the newest Odin Version. Get your device into download mode (maybe try different transfercables or USB Ports and the newest samsung drivers) and see if it works now.
If yes, flash the right Bootloader and Modem for your device and then flash the rom you wanted to flash.
If this didnt work, (and you have a custom recovery) try to reinstall the rom without any backups via the recovery at first and check afterwards, if the device is now recognized by Odin.
Good luck
JustAnotherAndroid said:
My s7 edge got stuck at boot screen so i reflashed stock rom and rerooted then restored the backup i had, it said fail because of low memory while restoring the system and now when i try to reflash the stock rom on odin it says model dismatch fail.
If someone could help me fix this I'm willing to pay something decent, but not a whole lot lol
Click to expand...
Click to collapse
I guess you still have twrp installed.
1. Step: go to TWRP and wipe everything except your SD-Card
2. Step: enter download mode on your device and then plug your usb in (maybe try a different usb-port or even another computer, or another usb cable)
3. Step:Flash the newest bootloader & modem in one step.
4. Step: Enter TWRP again and flash the firmware.zip via the installation process
I dont have TWRP, but i got it fixed, somehow my roomate got it, thanks anyways guys
So all he got was my phone to turn on, im still having this model dismatch fail issue..
Maybe You're trying to flash wrong firmware? What model did You buy?(check box) and what firmware did You download?
If nothing works then download 7zip. And remove all files from that tar.md5 file and leave system.img only. And then try reflashing it.
This way no matter what device You connect it should force flash this image file. Although it might be dangerous (a tiny little bit) so first make sure that You have proper firmware for Your model.
ProtoDeVNan0 said:
Maybe You're trying to flash wrong firmware? What model did You buy?(check box) and what firmware did You download?
If nothing works then download 7zip. And remove all files from that tar.md5 file and leave system.img only. And then try reflashing it.
This way no matter what device You connect it should force flash this image file. Although it might be dangerous (a tiny little bit) so first make sure that You have proper firmware for Your model.
Click to expand...
Click to collapse
Yes, I've used these files multiple times before i did what i did, ill give that a try, if it works, i owe you.
If system.img by itself will flash successfully and Your phone won't boot then add slowly more files to that tar file (boot.img, recovery.img etc)
You could also try looking for a pit file for Your phone and then flash it with it. Pit file usually fixes most problems even broken partitions.
And make sure that You put that tar file in AP/PDA.
If nothing above works then send me screenshots of ODIN and the file that You're trying to flash. Maybe I'll notice something. But I hope You'll fix it
JustAnotherAndroid said:
Yes, I've used these files multiple times before i did what i did, ill give that a try, if it works, i owe you.
Click to expand...
Click to collapse
So I tried, and i get some invalid file error
These are the files that are in the AP one
https://gyazo.com/a72785631ad62d412a8c40eb464d3126
I found out my problem, i was still uing the modified version of odin that i used to root my phone