Problems with recovery - Galaxy S 4 Q&A, Help & Troubleshooting

My Galaxy s7 broke down and had to go back to my old galaxy s4, but I have a big problem or small, want to install this room but I can not install any recovery.
I tried everything in these last two days, stock rooms SamMobile, kernel's, TWRP, ROM Manager, philz Touch via odin .... via zip file ..... bootloader and modem .... pit files ... .pages and pages on xda ... different odin, cables.....everything
And always appears this error
E: footer is wrong
E: signature verification failed
If anyone can give help to fix this I am very appreciated, I want to install this room, but it's complicated
Thank you in advance
And sorry for my bad english

What is the phone's model number? The errors appear on Odin? What bootloader version is on the phone?

Galaxy S4
GT-I9505
4.4.2
I9505XXUGNJ8
bootloader .......where I see the bootloader?

audit13 said:
What is the phone's model number? The errors appear on Odin? What bootloader version is on the phone?
Click to expand...
Click to collapse
In the Odin no errors, everthing is ok
Galaxy s4
GT-I9505
4.4.2 stock room
i9505xxugnj8
where I see the bootloader?

Stock firmware firmware from Odin includes stock recovery.
Flash again with Odin by doing this: uncheck everything in Odin except f reset time, flash rom, when you see the word reset in the status window, remove USB cable from phone, remove battery for three seconds, replace battery, use buttons to boot directly to recovery, factory reset/wipe, reboot.

believe it or not I've done it in a post here on xda, I tried everything
different computers, even if the smartphone is original

Tiaguinho said:
believe it or not I've done it in a post here on xda, I tried everything
different computers, even if the smartphone is original
Click to expand...
Click to collapse
Is the phone rooted? Or can you root it?
If it is or you manage to root it, you should be able to flash a twrp.img file via Flashify.

yes, is rooted

GDReaper with Flashify I made it
finally yupiiiiiiiii
Thank you all for the great help, problem solved
thank you .... thank you, saved the day
thank you to all

Related

Help to flash firmware, knox is 0x1

Help!
I need some advice. I had stock 4.2.2, flashed omega v14 and then 4.3 GE ROM. I did not know about knox and I have tripped it. It shows 0x1 now. I understand that I cannot change that, and that is ok.
But I cannot flash any firmwares now.
I have tried the pre-rooted 4.3 in Odin:
I9505XXUEMK8-PRE-ROOTED-KNOX-FREE-ODEX-FULL
failed.
I have tried official 4.3 for my carrier:
I9505XXUEMJ7_I9505TENEMJ8_I9505XXUEMJ7_HOME.tar
failed.
If I try to flash cwm it boots, but it just stays on the google logo, and does not continue. If I try to enter recovery I get a message about secure mode and it does not enter recovery.
If I flash stock recovery, I can get into recovery. I have tried a factory reset, but it still boots to Google logo and nothing else.
What should I do? There must be a way?
Same issue with me. Looking for solutions. You can install Pacman rom without any problem.
Can someone please give me some pointers?
I have now tried to install the newest firmware from sammobile, even though it isn't for my carrier. It also fails in Odin. I am using 3.07. I can flash CWM and I can get into CWM now, but there's nothing on my sdcard. So I can not flash anything from CWM.
Is it possible to load files onto CWM when the phone won't boot fully?
Is there a firmware I can flash in Odin that will work in this situation?
Should I try Kies? Will Kies be able to sort this out?
Right now I have a brick.
Try a different usb port, different cable, make sure kies is not running in the background and try Odin 1.85.
Make sure you're not mixing up "SDcard" partition on your internal storage with your EXT-SD Card the one that you physically inserted into the device! Save the zip into both maybe and wipe cache, factory wipe, then flash the ROM. Try another cable and USB, try a different recovery e.g. Philz!
RossFixxed said:
Make sure you're not mixing up "SDcard" partition on your internal storage with your EXT-SD Card the one that you physically inserted into the device! Save the zip into both maybe and wipe cache, factory wipe, then flash the ROM. Try another cable and USB, try a different recovery e.g. Philz!
Click to expand...
Click to collapse
During the failed flash-attempts, my sdcard is now empty. I have no files in CWM to flash. How do I get the files to my card? I don't have an external sdcard.
Trying Odin 1.85 now with latest firmware from sammobile. Right now the phone will not boot, I can't flash anything through Odin (due to knox?) and I can't flash anything from CWM since there are no files there to flash...
Edit:
Odin 1.85 also fails. I cannot install any firmware now.
Knox will not stop you flashing with Odin. It won't really affect anything except, potentially, your warranty.
Where have you put the Zip file for the ROM you want to install? You need to point CWM towards it directly, whatever folder it is in... Are you doing that?
You could buy an SD card for a few quid and copy a ROM onto that if needs be... I would flash Philz recovery and Wipe Cache. Wipe factory reset (install a new ROM Option), click Install from SD Card and navigate to the folder.
If your entire SD Partition is wiped you'll need to hook up to the PC and copy the zip back over in download mode.
EDIT: Sorry if this is real obvious or I'm missing what's wrong. I figure if you're anything like me you're a bit anxious about this, just going step by step, we'll fix it!
jadajada said:
Help!
I need some advice. I had stock 4.2.2, flashed omega v14 and then 4.3 GE ROM. I did not know about knox and I have tripped it. It shows 0x1 now. I understand that I cannot change that, and that is ok.
But I cannot flash any firmwares now.
I have tried the pre-rooted 4.3 in Odin:
I9505XXUEMK8-PRE-ROOTED-KNOX-FREE-ODEX-FULL
failed.
I have tried official 4.3 for my carrier:
I9505XXUEMJ7_I9505TENEMJ8_I9505XXUEMJ7_HOME.tar
failed.
If I try to flash cwm it boots, but it just stays on the google logo, and does not continue. If I try to enter recovery I get a message about secure mode and it does not enter recovery.
If I flash stock recovery, I can get into recovery. I have tried a factory reset, but it still boots to Google logo and nothing else.
What should I do? There must be a way?
Click to expand...
Click to collapse
OK so i haven't got an S4 but i do have the mini and have a similar problem.
MJ7 got released but not for my country, so i flashed an AUS MJ7 firmware. Now it has been rolled out to my country and i cannot flash my original FW back due to different CSC. AUS CSC=MJ1 & UK CSC=MK1. (Failed in Odin)
so my theory is i cannot now flash any other regions firmware and stuck with MJ1 CSC. (AUS Firmware)
Can you remember the original FW you flashed when you had knox 0x0?
Hope this makes sense. I'm not getting any replies on S4 mini forum.
*boy*racer* said:
OK so i haven't got an S4 but i do have the mini and have a similar problem.
MJ7 got released but not for my country, so i flashed an AUS MJ7 firmware. Now it has been rolled out to my country and i cannot flash my original FW back due to different CSC. AUS CSC=MJ1 & UK CSC=MK1. (Failed in Odin)
so my theory is i cannot now flash any other regions firmware and stuck with MJ1 CSC.
Can you remember the original FW you flashed when you had knox 0x0?
Hope this makes sense. I'm not getting any replies on S4 mini forum.
Click to expand...
Click to collapse
I most likely had I9505TENEMJ8 or the one before that (MJ5?). It is Norway TEN. I have downloaded the latest for TEN, MJ8 and it fails in Odin. Right now I would be happy just to be able to flash anything at all...
jadajada said:
I most likely had I9505TENEMJ8 or the one before that (MJ5?). It is Norway TEN. I have downloaded the latest for TEN, MJ8 and it fails in Odin. Right now I would be happy just to be able to flash anything at all...
Click to expand...
Click to collapse
OK so in stock recovery does it say your CSC code?
*boy*racer* said:
OK so in stock recovery does it say your CSC code?
Click to expand...
Click to collapse
I had CWM. Tried to flash stock recovery now, but I can't boot into it. I do the usual, then a green android shows up, then shifts to lying on his back with a red exclamation mark over it. Then the phone reboots and stays at the Samsung logo.
I am soon ready to give up. Nothing works!
RossFixxed said:
Knox will not stop you flashing with Odin. It won't really affect anything except, potentially, your warranty.
Where have you put the Zip file for the ROM you want to install? You need to point CWM towards it directly, whatever folder it is in... Are you doing that?
You could buy an SD card for a few quid and copy a ROM onto that if needs be... I would flash Philz recovery and Wipe Cache. Wipe factory reset (install a new ROM Option), click Install from SD Card and navigate to the folder.
If your entire SD Partition is wiped you'll need to hook up to the PC and copy the zip back over in download mode.
EDIT: Sorry if this is real obvious or I'm missing what's wrong. I figure if you're anything like me you're a bit anxious about this, just going step by step, we'll fix it!
Click to expand...
Click to collapse
How do I copy a file over through download mode?
I have tried adb shell with CWM booted, but I get "unauthorized device error"
I think I will buy an sdcard, but that won't solve my problem with not being able to flash anything with Odin. But perhaps I can get a working rom flashed through CWM.
I had no problems flashing roms with odin before knox. Now I can not flash anything at all.
Edit:
I have also tried connecting to kies now like this:
http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
I get a message saying model GT-I9505 does not support initialization.
So?
jadajada said:
How do I copy a file over through download mode?
I have tried adb shell with CWM booted, but I get "unauthorized device error"
I think I will buy an sdcard, but that won't solve my problem with not being able to flash anything with Odin. But perhaps I can get a working rom flashed through CWM.
I had no problems flashing roms with odin before knox. Now I can not flash anything at all.
Edit:
I have also tried connecting to kies now like this:
http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
I get a message saying model GT-I9505 does not support initialization.
So?
Click to expand...
Click to collapse
Boot it into download mode and copy the zip over with windows explorer, into the internal memory. Navigate with Install from Zip option in CWM (maybe try Philz, it definitely works for me, with Knox 0x1) and install.
RossFixxed said:
Boot it into download mode and copy the zip over with windows explorer, into the internal memory. Navigate with Install from Zip option in CWM (maybe try Philz, it definitely works for me, with Knox 0x1) and install.
Click to expand...
Click to collapse
When the phone is in download mode, where do I find it in Windows? It does not show in Windows Explorer, but it shows up in Odin.
jadajada said:
When the phone is in download mode, where do I find it in Windows? It does not show in Windows Explorer, but it shows up in Odin.
Click to expand...
Click to collapse
RossFixxed said:
Boot it into download mode and copy the zip over with windows explorer, into the internal memory. Navigate with Install from Zip option in CWM (maybe try Philz, it definitely works for me, with Knox 0x1) and install.
Click to expand...
Click to collapse
OK. I went out and got an sd card. Copied over a rom zip to the card, flashed CWM and rebooted into recovery. Chose install from external sd card and ran the file. The setup started and ran for a few seconds, then the phone rebooted and I am back on the Samsung Logo.
I just can't flash any firmwares on this phone no matter how. Knox or not, but it all started when I tried to reflash stock rom using odin after the knox flag was triggered.
Any more ideas?
Edit:
just tried Philz recovery also. Same thing. Update runs for a few seconds then reboot. No go.
Edit 2:
Philz has the option to clean for installing a new rom. It also fails with this:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p27
I suppose this as something to do with nothing being able to flash here. What Can be done with this?
Edit 3:
Success!! I was able to flash Omega Rom V14 through Philz. I actually installed and is running. I do get two knox lines at boot, one yellow and one red, something about the kernel not being something...
Now to investigate what the h*ll happened.
I am still unable to install any firmware through Odin. Going to try the Google Edition 4.3 again since I kind of liked that. But what actually happened here?
I'm happy to hear you got it working! I have no idea what caused it, first thought is corrupted zip files for rom. I'll have a look into it.
Sorry didn't get back to you, fell and injured my back, had to go get injections!
Sent from my GT-I9505 using xda app-developers app
jadajada said:
Can someone please give me some pointers?
I have now tried to install the newest firmware from sammobile, even though it isn't for my carrier. It also fails in Odin. I am using 3.07. I can flash CWM and I can get into CWM now, but there's nothing on my sdcard. So I can not flash anything from CWM.
Is it possible to load files onto CWM when the phone won't boot fully?
Is there a firmware I can flash in Odin that will work in this situation?
Should I try Kies? Will Kies be able to sort this out?
Right now I have a brick.
Click to expand...
Click to collapse
Mj7 is not a 4.3 rom. Have you tried to flash any stock 4.3 rom (for example ubuemk1 fob latam) or any other you are sur to be 4.3? Samsung alerted clearly before updating to 4.3 you won't be able to back prior versions any more...
Enviado desde mi GT-P7510 usando Tapatalk 2
jaswinky said:
Mj7 is not a 4.3 rom. Have you tried to flash any stock 4.3 rom (for example ubuemk1 fob latam) or any other you are sur to be 4.3? Samsung alerted clearly before updating to 4.3 you won't be able to back prior versions any more...
Enviado desde mi GT-P7510 usando Tapatalk 2
Click to expand...
Click to collapse
Solved! I do not know what solved it. I managed to install Omega Rom V16 through Philz recovery. From there I rebooted into Philz again and did a total clean to install new rom.
I downloaded a newer Odin, 3.09.
I flashed the same firmware which failed yesterday, 4.3 NEE rom.
This time it worked! So something helped.
Thank you to everyone who chipped in. It seemed rather hopeless yesterday.
I know the feeling man but is possible you were downgrading and you can't do that with knox now.
Sent from my GT-I9505 using xda app-developers app
jadajada said:
Can someone please give me some pointers?
I have now tried to install the newest firmware from sammobile, even though it isn't for my carrier. It also fails in Odin. I am using 3.07. I can flash CWM and I can get into CWM now, but there's nothing on my sdcard. So I can not flash anything from CWM.
Is it possible to load files onto CWM when the phone won't boot fully?
Is there a firmware I can flash in Odin that will work in this situation?
Should I try Kies? Will Kies be able to sort this out?
Right now I have a brick.
Click to expand...
Click to collapse
You can try flashing TWRP it support usb mount on recovery then transfer OMega Rom again..
Kies wont work on your phone because your already in the custom status.

[Q] GT-I9505 stuck at boot screen, No Recovery

Hi all.
I have big problems with a Galaxy S4 (GT-I9505).
A friend gave it to me becouse it doesnt start anymore. He was licen to Musik whan the screen turn black and the phone doesnt start anymore.
So it stucks at Bootscreen. I can start Odin mode and i tryied to flash CWM and TW Recovery. Also i tried to flash original Rom from Sammobile.
Odin passes with the recoveries but it doesnt work. The rom failed.
I got a error message when i try to start recovery mode.
Recovery Booting
Recovery is not seandroid enforcing
Set Warranty Bit: recovery
I cant get into fastboot mode. The informations in the Internet are that there is no fastbootmode for the gt-i9505.
Is there anybody who can help me? And sorry for my bad english
ScO_oT said:
Hi all.
I have big problems with a Galaxy S4 (GT-I9505).
A friend gave it to me becouse it doesnt start anymore. He was licen to Musik whan the screen turn black and the phone doesnt start anymore.
So it stucks at Bootscreen. I can start Odin mode and i tryied to flash CWM and TW Recovery. Also i tried to flash original Rom from Sammobile.
Odin passes with the recoveries but it doesnt work. The rom failed.
I got a error message when i try to start recovery mode.
Recovery Booting
Recovery is not seandroid enforcing
Set Warranty Bit: recovery
I cant get into fastboot mode. The informations in the Internet are that there is no fastbootmode for the gt-i9505.
Is there anybody who can help me? And sorry for my bad english
Click to expand...
Click to collapse
Hi mate,
Some more information would be nice.
Which was the latest firmware and which version did you want to flash?
http://forum.xda-developers.com/showthread.php?t=2265477
Take a look at this, especially to the "Odin troubleshooting" part.
Sent from my Galaxy S4 using Tapatalk
DarkerTimes said:
Hi mate,
Some more information would be nice.
Which was the latest firmware and which version did you want to flash?
http://forum.xda-developers.com/showthread.php?t=2265477
Take a look at this, especially to the "Odin troubleshooting" part.
Sent from my Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
Hey. Thank you for the answere.
I tried to flash I9505XXUGNF6_I9505DREGNF2_I9505XXUGNF6_HOME.tar
The latest firmware was 4.2.2 (Austria 3)
I tried now another Odin version and i flashed it with PID file. The only result is that i get a recovery booting
in the top left corner but it still stucks... i cannot open recovery to wipe cache / factory reset.
The last thing i tried was to flash the original recovery. <- back to the 3 errors.
now i try another odin software with another usb port. odin passes with everything but i cannot open recovery. just stuck at Recovery Booting
ScO_oT said:
Hey. Thank you for the answere.
I tried to flash I9505XXUGNF6_I9505DREGNF2_I9505XXUGNF6_HOME.tar
The latest firmware was 4.2.2 (Austria 3)
I tried now another Odin version and i flashed it with PID file. The only result is that i get a recovery booting
in the top left corner but it still stucks... i cannot open recovery to wipe cache / factory reset.
The last thing i tried was to flash the original recovery. <- back to the 3 errors.
now i try another odin software with another usb port. odin passes with everything but i cannot open recovery. just stuck at Recovery Booting
Click to expand...
Click to collapse
Hi,
does Odin give a fail log? Or does it finish successfully?
Which Odin versions did you try?
And the firmware you want to flash now is a Austria 3 one as well? You can also take another version (but still with the same csc) in case that your current one is damaged or something like this.
Sent from my Galaxy S4 using Tapatalk
DarkerTimes said:
Hi,
does Odin give a fail log? Or does it finish successfully?
Which Odin versions did you try?
And the firmware you want to flash now is a Austria 3 one as well? You can also take another version (but still with the same csc) in case that your current one is damaged or something like this.
Sent from my Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
Hi again.
I used Odin 3.04 and 1.85. Also i tried diffrent USB Ports.
I tried to flash CWM 6.0.4.7 Touch and Non Touch, also twrp.
It passes with all the recoverys as well with the rom from sammobile and the stock recovery rom from the other tread.
i tried with and without pit file. Odin passes everytime.
Afther restarting the phone i just get the blue (booting recovery) or the 3 error messages in the top left corner and it stucks for hours.
Iam not able to boot recovery and wipe the cache... and iam not able to boot into the system do something else.
the only thing working is the download mode.
iam out of ideas.
ScO_oT said:
Hi again.
I used Odin 3.04 and 1.85. Also i tried diffrent USB Ports.
I tried to flash CWM 6.0.4.7 Touch and Non Touch, also twrp.
It passes with all the recoverys as well with the rom from sammobile and the stock recovery rom from the other tread.
i tried with and without pit file. Odin passes everytime.
Afther restarting the phone i just get the blue (booting recovery) or the 3 error messages in the top left corner and it stucks for hours.
Iam not able to boot recovery and wipe the cache... and iam not able to boot into the system do something else.
the only thing working is the download mode.
iam out of ideas.
Click to expand...
Click to collapse
You can try to flash a three or four part firmware with Odin 3.09, it will wipe your device itselfs
Sent from my Galaxy S4 using Tapatalk
Try flashing the recovery again with auto-reboot unchecked.
But it sounds more like a hardware failure to me.
Thank you all for your help.
And yes. It was a Hardware failure.

Tried to flash CWM with odin and it failed, i think its bricked

A friend tried to flash CWM ( http://forum.xda-developers.com/showthread.php?t=2201860 ) for s4 and it failed...and now the phone is stuck..it says: Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again
Phone model: i9505
Some help please? I don't know what to do
EDIT: i found that i can flash the firmware with odin..but i still have a question..im not really sure what firmware i had before..so is there any problem if i install firmware from other country or carrier?
You can find latest stock fw for your phone here.
wvw.sammobile.com/firmwares/checker/
I can't post external links so change wvw to www
waynevan2000 said:
You can find latest stock fw for your phone here.
wvw.sammobile.com/firmwares/checker/
I can't post external links so change wvw to www
Click to expand...
Click to collapse
thanks but.. the phone isnt starting that's why i have to flash a firmware..so i can't check what firmware i have..
The flashing process failed at half of it..:/......
Just pick one of the latest.
btw if the flashing of the recovery fails then just try the standard stuff
- different usb port
- different cable
Lennyz1988 said:
Just pick one of the latest.
btw if the flashing of the recovery fails then just try the standard stuff
- different usb port
- different cable
Click to expand...
Click to collapse
Finally worked to flash a firmware..i used europe firmware from here http://forum.xda-developers.com/showpost.php?p=41072392&postcount=2
Aaaaand when the phone started, a error keeped showing up: samsung keyboard stoped working...and i entered in recovery menu and did a factory reset, and that error is still showing.... some help?..maybe i should flash other firmware? which firmware? i really don't know what firmware it had before..
And one more thing..i cant even connect to wifi because it says something about security error something that the system blocked an unwanted action or something like that :/..something from knox :/
PS: i flashed just the AP file but the firmware had more files :/..
raulx222 said:
Finally worked to flash a firmware..i used europe firmware from here http://forum.xda-developers.com/showpost.php?p=41072392&postcount=2
Aaaaand when the phone started, a error keeped showing up: samsung keyboard stoped working...and i entered in recovery menu and did a factory reset, and that error is still showing.... some help?..maybe i should flash other firmware? which firmware? i really don't know what firmware it had before..
And one more thing..i cant even connect to wifi because it says something about security error something that the system blocked an unwanted action or something like that :/..something from knox :/
PS: i flashed just the AP file but the firmware had more files :/..
Click to expand...
Click to collapse
Why did you want to flash a custom recovery, to just flash a custom rom? If so, then just flash the custom recovery again and then flash the custom rom you want.
And why would you just flash the ap file if the firmware has more files? Makes no sense to me.
Lennyz1988 said:
Why did you want to flash a custom recovery, to just flash a custom rom? If so, then just flash the custom recovery again and then flash the custom rom you want.
And why would you just flash the ap file if the firmware has more files? Makes no sense to me.
Click to expand...
Click to collapse
Thanks! i managed it.. 2 S4 devices got Imperium v13 ROM

S4 GTI9505 flashed recovery without root help

So I accidentally flashed the recovery package through Odin to a friend's s4 gt i9505 and i get a no access error in the recovery with an android and a red triangle. Since it has a custom recovery odin doesnt detect it. My question is what should i do ? . There is literally noone that has experienced the same (noob) mistake so there is no real fix. The phone is running 4.4.2 with an official upgrade to lollipop but KNOX was tripped so I would like to fix for him without having to pay for official service.
Thanks in advance.
Odd. I have a custom recovery on my S4 and Odin detects my S4 without a problem, meaning something else is causing your connection woes. Obviously, make sure you're in download mode first (hold down the volume down, home, power keys), which wouldn't be affected by a custom recovery, and change USB ports until Odin does recognize the device. Then flash the stock ROM again to restore the S4 to working order.
Strephon Alkhalikoi said:
Odd. I have a custom recovery on my S4 and Odin detects my S4 without a problem, meaning something else is causing your connection woes. Obviously, make sure you're in download mode first (hold down the volume down, home, power keys), which wouldn't be affected by a custom recovery, and change USB ports until Odin does recognize the device. Then flash the stock ROM again to restore the S4 to working order.
Click to expand...
Click to collapse
the thing is it bypassed download mode straight into the recovery so it didnt recognize it at all. Maybe it was because it had a non rooted recovery? Anyway i rooted the phone with kingoroot which on the one hand it worked on the other hand the phone laggs like hell but it wiped the custom recovery somehow so i got samsung's download mode back flashed cf auto root but it doesnt update su binary so thats my problem now . The phone is a 4.4.2 firmware so should i Flash first lollipop and then root it or flash a recovery to install the su binary from there?
CostasV23 said:
the thing is it bypassed download mode straight into the recovery so it didnt recognize it at all. Maybe it was because it had a non rooted recovery? Anyway i rooted the phone with kingoroot which on the one hand it worked on the other hand the phone laggs like hell but it wiped the custom recovery somehow so i got samsung's download mode back flashed cf auto root but it doesnt update su binary so thats my problem now . The phone is a 4.4.2 firmware so should i Flash first lollipop and then root it or flash a recovery to install the su binary from there?
Click to expand...
Click to collapse
Based on your first post and this post I have come to the conclusion that you have absolutely no idea what you are doing. You are mixing everything up. And I mean everything.
- A non rooted recovery? What is that? It doesn't excist. A recovery has nothing to do with root.
- Because you had a custom recovery Odin doesn't detect it? Completely impossible. A custom recovery has nothing to do with Odin detecting or not detecting.
- Wiping the recovery and getting download mode back? Dude that's impossible. Download mode and recovery are two completely different things.
1. Flash Lollipop if you want Lollipop. With .pit and re-partition.
2. Perform a factory reset.
3. Flash cf-auto root.
That's all there is to it.
Lennyz1988 said:
Based on your first post and this post I have come to the conclusion that you have absolutely no idea what you are doing. You are mixing everything up. And I mean everything.
- A non rooted recovery? What is that? It doesn't excist. A recovery has nothing to do with root.
- Because you had a custom recovery Odin doesn't detect it? Completely impossible. A custom recovery has nothing to do with Odin detecting or not detecting.
- Wiping the recovery and getting download mode back? Dude that's impossible. Download mode and recovery are two completely different things.
1. Flash Lollipop if you want Lollipop. With .pit and re-partition.
2. Perform a factory reset.
3. Flash cf-auto root.
That's all there is to it.
Click to expand...
Click to collapse
What I meant was that I accidentally flashed the recovery tar.md5 file before cf-auto-root and it wasn't working . aside that I get an su binary update error is there a fix for that?
CostasV23 said:
What I meant was that I accidentally flashed the recovery tar.md5 file before cf-auto-root and it wasn't working . aside that I get an su binary update error is there a fix for that?
Click to expand...
Click to collapse
Root and recovery are two unrelated things. You don't need root for a custom recovery and you don't need a custom recovery to root.
I would start with a clean install since you used Kingoroot and cf auto-root.
Flash a stock rom with re-partition and .pit. Then only use cf auto-root.
Lennyz1988 said:
I would start with a clean install since you used Kingoroot and cf auto-root.
Flash a stock rom with re-partition and .pit. Then only use cf auto-root.
Click to expand...
Click to collapse
If I flash the official lollipop firmware via odin will it work you mean ? (Sorry for noob question ) also about that .pit I haven't found anywhere a .pit file is it necessary ?
CostasV23 said:
If I flash the official lollipop firmware via odin will it work you mean ? (Sorry for noob question ) also about that .pit I haven't found anywhere a .pit file is it necessary ?
Click to expand...
Click to collapse
You can also wipe /system and /data in TWRP and then flash Lollipop firmware.
Lennyz1988 said:
You can also wipe /system and /data in TWRP and then flash Lollipop firmware.
Click to expand...
Click to collapse
Is it obligatory i wipe the system partition because odin flash rewrites it anyway or am i wrong on this one?
Also after kingroot the recovery was wiped clean for some reason
Bro my s4 GT I9505 have stock rom v5 .0.1 UHOE3.now I need rooted and install philz touch recovery so pls proper guide and file.thanks in advance.
Philz is outdated, and certain ROMs will not install with it. Use TWRP instead. For installing, it's just like installing a stock ROM through Odin. We have guides on this in the General section.

Can't Handle It

Hello Guys, recently i was trying to install CMW recovery on my Samsung Galaxy S4 GT-I9505 via odin and it is not working so i researched and found that i can use "FLASHIFY" from playstore to flash the recovery. I flashed it successfully but when i rebooted the phone, it only boot to recovery. Nothing else just the recovery. I can't get out there. So i tried to flash firmware from sammobile and still it doesnt work. I really need your help.
Sorry for the bad English.
juicy777 said:
Hello Guys, recently i was trying to install CMW recovery on my Samsung Galaxy S4 GT-I9505 via odin and it is not working so i researched and found that i can use "FLASHIFY" from playstore to flash the recovery. I flashed it successfully but when i rebooted the phone, it only boot to recovery. Nothing else just the recovery. I can't get out there. So i tried to flash firmware from sammobile and still it doesnt work. I really need your help.
Sorry for the bad English.
Click to expand...
Click to collapse
Do not use CWM it's outdated. Only use TWRP recovery.
So i tried to flash firmware from sammobile and still it doesnt work.
Click to expand...
Click to collapse
Post the Odin log here.
For twrp, flash via Odin.
Before flashing, uncheck everything except f reset time. Flash and, when you see reset in the status window, remove USB cable from the phone, remove battery, replace battery, boot into twrp using buttons.

Categories

Resources