Related
I have a problem in flashing custom rom....
When ever i try to flash custom rom my phone freez on g3mod logo and not reboot.
After this i go to recovery screen to apply restore it couldn't restore.
Some msg appear like...
dev/block..........., etc
Can't mount system error.....
Then i try stock rom it flash perfectly....
After flash stock rom i flash g3mod kernel and this time the phone freez on g3mod logo then
I flash stock kernel and it's work phone reboot perfectly.....
Please help me if anybody know solution of this problem.... :-(
Yeah I too had a same problem once can any one tells what's the fault
Sent from my GT-I5800 using xda premium
Try mounting all the things such as /system etc. Do this in CWM recovery.
I try but it give me only error... :-(
Sent from my GT-I5800 using xda premium
Hi,
I have installed the latest build (15/7-2012) of locera's UNOFFICIAL CM9 build - and it went fine.
http://forum.xda-developers.com/showthread.php?t=1542911
Im using CWM-Recovery 5.5.0.4 that locera also created
But after i tried to shutdown the tablet, i just keeps showing Samsung splash/CM9 Splash and then reboots.
I have tried to clear the cache, but it does not help.
Anybody got any ideas?
Just flash ics stock rom with Odin and make data factory reset (this will remove all things in device if you have any important files move to extsd)
Then flash cwm recovery and flash any custom rom you want
Good luck
Sent from my GT-P6800 using xda app-developers app
Going from CM9 to official ICS I was also getting a bootloop. To get official ICS to work, I had to flash official ICS with Odin, then reboot in stock recovery and make a full reset. I think that going to or coming from CM9 creates a problem with stock rom. Even with stock HC rom it wasnt working anymore.
acc_kareemomar said:
Just flash ics stock rom with Odin and make data factory reset (this will remove all things in device if you have any important files move to extsd)
Then flash cwm recovery and flash any custom rom you want
Good luck
Sent from my GT-P6800 using xda app-developers app
Click to expand...
Click to collapse
You can try a wipe data, then wipe cache and wipe dalvik. (wipe data will remove all you apps and system setting, but your files should remain intact). If still bootlooping, (restore you backup thru CWM if you have one), reflash CM9 via CWM after doing what previously mentioned.
If that doesn't work, do what acc_kareemomar suggests.
Hi all. Sorry fo my bad English - I'm russian.
Ok, I have a bricked ZTE Blade - GEN2, China 256Mb RAM.
I've read this topic modaco com/topic/343587-guide-de-bricking-a-zte-blade/
I have some problems, thats why I'm asking for some help.
1) I've used Method 5: The dodgy ZTE firmware flasher
At the point Flash Firmware - 6)When finished it should boot into FTM mode. - but it doesn't.
I've took out the battary, and rebooted my phone in the FTM-mode. Succesfully restored IMEI (got no errors).
And then:
Put clockworkmod in the recovery partition
Take out the battery and turn on the phone. Clockworkmod should load
There is no ClockWork! Only FTM...
Installed ClockWork via cmd script. It has loaded, but here is the next problem:
"You can now flash a ROM"
I've tried to flash Swedish_Spring_RLS5. So I mounted system and data.
Installation ok, but if i reboot i get clockwork.
Tried to flash image.bin from zte-website. If i reboot after the installation i get clockwork.
Tried to get stock recovery. Installed it via cmd script, but it doesn't load.
I get FTM-mode.
There is no phone-workshop in my city, and I have no more warranty for this smartphone, so i hope you can help me. Thanks.
At the beggining the problem was - the boot was down. The splash appeares, slides to right, the phone reboots.
Try reflashing clockworkmod and do a full wipe.
It might also help if you format system.
Sent from my GT-I9300 using xda premium
doesn't helped
Ok, reinstalled cwm, have done all wipes, formatted system,data.
Tried to flash.
Nothing. Reboot => CWM
Does the rom flash process success?
Try flashing another rom.
Sent from my GT-I9300 using xda premium
yes
yes, it does. i get no errors, and
there are files in the system partiton.
when i make a backup i see all the files from the os.
have tried. cm7, cm9, other stock: 2.1, 2.3 - every gives the same result - only cwm is loading.
when i flash the stock recovery - then i get only ftm on load.
is my phone totally bricked? i hope there is a way to restore...
It's semi-bricked. You could try to flash stock rom with ftm and root it with z4root.
Sent from my GT-I9300 using xda premium
ok
ok. i will try P729J_2GW900V2.2.0B01-NO_RECOVERY-update_signed.zip
will update this message when done.
--- upd
tried:
1) china tpt's
2) all wipes and formats
3) all mounts + flashing Swedish_Spring_RLS5
4) boot.img via adb
result: ANDROID Loaded, but the hardware keys are not working... UrbanDrawer, any ideas?
Just reflash rom and wipe data.
If the problem didn't get fixed, flash another rom.
Sent from my GT-I9300 using xda premium
no success
Flashed a stock China ROM.
No success. Boot info FTM. No way to boot the system...
Tried another ROM's for 512Mb models - same result: FTM-mode :crying:
Any other ideas?
UrbanDrawer said:
Try to flash stock rom with ftm and root it with z4root.
Click to expand...
Click to collapse
Before doing this, you could also hard reset the phone, that way there's not going to be any software-related problems.
Sent from my GT-I9300 using xda premium
what i do
Ok. What i do.
1) Launch ZTE Flasher, swich my phone into download mode (vol+/vol-/power)
2) Flash IT (China v880 Firmware)
3) When finished - release battery.
Turn on and get FTM-mode, no clockword or smth. else. Only FTM.
4) TPT's : China v880 GEN2 TPT's.
When finished - the phone doe's not reboot. Need to release the battery, and to power on.
5) Oh my God! Yellow CWM!!! :laugh:
I mount data,system.
All wipes.
Format all, except SD.
6) Flashing ROM.
7) Reboot.
After the reboot I get CWM (on stock rom's) or FTM (after CM).
What am I doing wrong?
Try method 1.
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Sent from my GT-I9300 using xda premium
cwn
No chance. CWM loading. No ROM
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Sure. I did!
I have been a Samsung Galaxy Y user for more than a year. I have to say that this device is awesome. But.... I have later noticed 2 problems.
1) One day I tried to install Elegance ROM. I followed all steps very carefully and when the installation was done, I rebooted my phone. Unfortunately, my phone booted up again at Samsung stock firmware. I tried to enter recovery mode because I wanted to see what went wrong, but I was automatically redirected to CWM recovery. I tried once again to install Elegance ROM, and the result was the same. From that day, CWM is my default recovery. Why? How to fix this??? I can't access stock recovery and I also cannot install any custom ROMs. How to fix this?
2) Even my SD card is full with songs, photos and videos, the "Gallery" and "Music" apps don't read any file. Why? How to fix this?
P.S. I'm running stock 2.3.6 rooted.
Thanks for help.
Sent from my GT-S5360 using xda app-developers app
You have a permanent cwm because you are using a custom kernel with a permanent cwm - probably was included in the rom zip
If you want stock recovery flash stock kernel (can be found in general section or flash hells fusion #50 from dev section and select option to flash stock kernel)
you would of remained on stock rom after flashing another rom because you didn't mount system in cwm before you flashed the zip
As for your other problem flash stock rom via odin as you have probably mucked something up from flashing zips incorrectly
So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium
dimsar2013 said:
So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Dude ur 2nd problem may be caused by Ur sd card!!
Try another sd card may it help you!!
dimsar2013 said:
So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Yes stock kernel = stock recovery and you can flash a temporary cwm
there is no problems with a permanent cwm in custom kernels as you need cwm to flash roms
If you goto phone settings about phone it will show you your current baseband - for example mine is xxlf3
You can either download that stock rom firmware from dokys thread if there or any other from your country
Thanks everybody. You are all really helpful. I appreciate your help. But tell me, do I need to mount system before installing Elegance? And while I'm having a custom kernel installed, can I flash roms or I need the stock kernel?
Thanks again.
Sent from my GT-P3110 using xda premium
dimsar2013 said:
Thanks everybody. You re awesome. I appreciate your help. But tell me, do I need to mount system before installing Elegance? And while I'm having a custom kernel installed, can I flash roms or I need the stock kernel?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Follow instructions on the op of the rom you want to flash
you must always mount system before flashing a zip else nothing will happen - you can flash zips all day and no changes would happen as it can't write to system as it's not mount!
As a general rule
wipe system
wipe data
wipe cache
mount system
mount data
mount cache
flash zip
format data (not always required just for some roms)
restart
you do not need to go back to stock to change rom
There are guides in general section - please read them first then you would understand the process
My current ROM. Stock 2.3.6 rooted
Sent from my GT-S5360 using xda app-developers app
A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help
dimsar2013 said:
A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help
Click to expand...
Click to collapse
Yes you can flash it over any kernel and yeah mount all the partitions after formatting them.
dimsar2013 said:
A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help
Click to expand...
Click to collapse
I refer you to my previous post in this thread
wipe data system cache
mount everything
flash rom
you can use any compatible kernel
The problem with the files is caused by the sdcard
Sent from my GT-P3110 using XDA Premium 4 mobile app
Ok so lately I have noticed that my Phone is taking way to long to boot. When a normal l7 would normal boot the phone, it should got the the LG logo for about 10 sec and then after that it should go to(in this case the Carbon fiber boot animation) for about 30 sec +
But the problem is with my phone the LG logo takes 2min + till it moves to the Carbon fiber boot animation then about 1 min for the boot of the carbon OS (P.S just a side note, it did it with slim bean and CM and still no luck)
I have also used CWM to clear/F reset everything, but it has not made a difference.
Could anyone help me out here?
Is there a bootloader or kernel i need to flash to fix this? or is it because my CWM may be outdated(Shouldent matter) and again I may of missed somthing in CWM so still point out the basics <--These are just ideas
On another side note the phone is a
-p705
-32GB Micro SD card in it
- cwm 6.0.2.8
-Kernel: 3.4.4--Cr3pT-OC [email protected] #1 Sat Feb 8 04:34:03 EET 2014
-(If any more info is needed, just ask)
Link to carbon ROM: http://forum.xda-developers.com/showthread.php?t=2638321
See if it boots quicker without your microsd card, if it does, then there's your problem. There's a lot of fake/faulty cards being sold on the net.
Otherwise, the LG logo shouldn't be there for 2 min, reflash stock via KDZ.
Sent from my LG-p705 using Tapatalk
BUMP!
Im coming back from the dead, as I have decided to try using my P705 again, and I have tried removing the SD card and still no luck, any help?
can someone give me a link on how I go back to stock so I can start again?
DarkN3ss61 said:
BUMP!
Im coming back from the dead, as I have decided to try using my P705 again, and I have tried removing the SD card and still no luck, any help?
can someone give me a link on how I go back to stock so I can start again?
Click to expand...
Click to collapse
You need kdz updater to go back to stock, also when you get cwm again
flash cwm 6.0.4.9
Sent from my LG-P705
I have just done that and there has been no change in the LG logo time(bootloader) but once it gets to the room logo it's much faster. But still slow on the first half
DarkN3ss61 said:
I have just done that and there has been no change in the LG logo time(bootloader) but once it gets to the room logo it's much faster. But still slow on the first half
Click to expand...
Click to collapse
i have a p705, i have a problem. I cant use any rom thets over 4.1.2
Sent from my LG-P705
Nesh89 said:
i have a p705, i have a problem. I cant use any rom thets over 4.1.2
Sent from my LG-P705
Click to expand...
Click to collapse
how??
Do you have CWM6.0.4.9????
I can't now provide you a link, but type on youtube "LG L7 (root,bootloader,CWM"
Then in description is a link.
Download it and flash it with KDZ.
That is rom for P700 with root, unlocked bootloader and CWM.
Then flash CWM6.0.4.9 for P705
Than download idk cyanhacker or cm11 by imer choose. . bit take care that ypu use rom for P705
Then in updater-script change from P705 to P700,because that (((p700 kdz rom)))
Flash rom, and that's it.
Here is an instructions to flash
Wipe data/factory reset
Wipe cache
Mount system
Format system
Wipe dalvik-cacje
Flash rom
Wipe cache
Wipe dalvik cache
Flash GAPPS
Wipe cache
Wipe dalvik cavhe
Reboot.
Paget96 said:
how??
Do you have CWM6.0.4.9????
I can't now provide you a link, but type on youtube "LG L7 (root,bootloader,CWM"
Then in description is a link.
Download it and flash it with KDZ.
That is rom for P700 with root, unlocked bootloader and CWM.
Then flash CWM6.0.4.9 for P705
Than download idk cyanhacker or cm11 by imer choose. . bit take care that ypu use rom for P705
Then in updater-script change from P705 to P700,because that (((p700 kdz rom)))
Flash rom, and that's it.
Here is an instructions to flash
Wipe data/factory reset
Wipe cache
Mount system
Format system
Wipe dalvik-cacje
Flash rom
Wipe cache
Wipe dalvik cache
Flash GAPPS
Wipe cache
Wipe dalvik cavhe
Reboot.
Click to expand...
Click to collapse
i have cwm 6.0.4.9 i made a few ports and mods my self so i kind of know what im doing,
its a problem with the phone.
Sent from my LG-P705
Nesh89 said:
i have cwm 6.0.4.9 i made a few ports and mods my self so i kind of know what im doing,
its a problem with the phone.
Sent from my LG-P705
Click to expand...
Click to collapse
Ok, but believe me
Try this
Paget96 said:
Ok, but believe me
Try this
Click to expand...
Click to collapse
ok when i find the time il do it
Sent from my LG-P705