I have been a Samsung Galaxy Y user for more than a year. I have to say that this device is awesome. But.... I have later noticed 2 problems.
1) One day I tried to install Elegance ROM. I followed all steps very carefully and when the installation was done, I rebooted my phone. Unfortunately, my phone booted up again at Samsung stock firmware. I tried to enter recovery mode because I wanted to see what went wrong, but I was automatically redirected to CWM recovery. I tried once again to install Elegance ROM, and the result was the same. From that day, CWM is my default recovery. Why? How to fix this??? I can't access stock recovery and I also cannot install any custom ROMs. How to fix this?
2) Even my SD card is full with songs, photos and videos, the "Gallery" and "Music" apps don't read any file. Why? How to fix this?
P.S. I'm running stock 2.3.6 rooted.
Thanks for help.
Sent from my GT-S5360 using xda app-developers app
You have a permanent cwm because you are using a custom kernel with a permanent cwm - probably was included in the rom zip
If you want stock recovery flash stock kernel (can be found in general section or flash hells fusion #50 from dev section and select option to flash stock kernel)
you would of remained on stock rom after flashing another rom because you didn't mount system in cwm before you flashed the zip
As for your other problem flash stock rom via odin as you have probably mucked something up from flashing zips incorrectly
So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium
dimsar2013 said:
So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Dude ur 2nd problem may be caused by Ur sd card!!
Try another sd card may it help you!!
dimsar2013 said:
So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Yes stock kernel = stock recovery and you can flash a temporary cwm
there is no problems with a permanent cwm in custom kernels as you need cwm to flash roms
If you goto phone settings about phone it will show you your current baseband - for example mine is xxlf3
You can either download that stock rom firmware from dokys thread if there or any other from your country
Thanks everybody. You are all really helpful. I appreciate your help. But tell me, do I need to mount system before installing Elegance? And while I'm having a custom kernel installed, can I flash roms or I need the stock kernel?
Thanks again.
Sent from my GT-P3110 using xda premium
dimsar2013 said:
Thanks everybody. You re awesome. I appreciate your help. But tell me, do I need to mount system before installing Elegance? And while I'm having a custom kernel installed, can I flash roms or I need the stock kernel?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Follow instructions on the op of the rom you want to flash
you must always mount system before flashing a zip else nothing will happen - you can flash zips all day and no changes would happen as it can't write to system as it's not mount!
As a general rule
wipe system
wipe data
wipe cache
mount system
mount data
mount cache
flash zip
format data (not always required just for some roms)
restart
you do not need to go back to stock to change rom
There are guides in general section - please read them first then you would understand the process
My current ROM. Stock 2.3.6 rooted
Sent from my GT-S5360 using xda app-developers app
A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help
dimsar2013 said:
A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help
Click to expand...
Click to collapse
Yes you can flash it over any kernel and yeah mount all the partitions after formatting them.
dimsar2013 said:
A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help
Click to expand...
Click to collapse
I refer you to my previous post in this thread
wipe data system cache
mount everything
flash rom
you can use any compatible kernel
The problem with the files is caused by the sdcard
Sent from my GT-P3110 using XDA Premium 4 mobile app
Related
I have a retail XT907 on 4.1.2 that I got rooted, unlocked and twrp installed
I want to try the Energy rom and have it downloaded.
Where do I place the zip on the phone to install it in recovery?
I have backed up my system to the sd
Do I need to partition my phone? How to do it?
Can I instal the rom on my phone running 4.1.2?
Thanks
khalilcr said:
I have a retail XT907 on 4.1.2 that I got rooted, unlocked and twrp installed
I want to try the Energy rom and have it downloaded.
Where do I place the zip on the phone to install it in recovery?
I have backed up my system to the sd
Do I need to partition my phone? How to do it?
Can I instal the rom on my phone running 4.1.2?
Thanks
Click to expand...
Click to collapse
Energy is 4.1.1 and right now can only be installed via safe strap.
Sent from my XT907 using xda app-developers app
jco23 said:
Energy is 4.1.1 and right now can only be installed via safe strap.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
How do I flash safestrap? I currently have TWRP.
I downloaded safestrap.md5 but do I flash it through TWRP or rename .apk?
khalilcr said:
How do I flash safestrap? I currently have TWRP.
I downloaded safestrap.md5 but do I flash it through TWRP or rename .apk?
Click to expand...
Click to collapse
see this thread:
http://forum.xda-developers.com/showthread.php?t=1979383
and then this:
http://www.droidrzr.com/index.php/topic/11600-installing-custom-rom-to-stock-using-ss-312/
safestrap.md5 is NOT the flashable/installable file. You want the .apk file.
And why can you not install Eclipse on CWM or TWRP?
I got energy Rom to flash just fine on twrp
Sent from my XT907 using Tapatalk 2
TWRP would not allow me to create a partition.
I renamed the md5 to apk and installed it just fine, but now I have 2 recoveries
Installed the Energy ROM and its awesome but camera app fc every time :crying:
I want to try the PAC rom next.
To do so I assume I need to delete the current partition where I have the Energy ROM installed?
Can I install the PAC rom on the stock ROM slot?
If so how do I get rid of safestrap and keep only TWRP?
Thanks to the Razr M community for all the help, I only had Sammy experience before getting the Razr M and been trying to learn it all over again
khalilcr said:
TWRP would not allow me to create a partition.
I renamed the md5 to apk and installed it just fine, but now I have 2 recoveries
Installed the Energy ROM and its awesome but camera app fc every time :crying:
I want to try the PAC rom next.
To do so I assume I need to delete the current partition where I have the Energy ROM installed?
Can I install the PAC rom on the stock ROM slot?
If so how do I get rid of safestrap and keep only TWRP?
Thanks to the Razr M community for all the help, I only had Sammy experience before getting the Razr M and been trying to learn it all over again
Click to expand...
Click to collapse
Camera will not work on energy if you install it on top of a 4.1.2 ROM.
SS can been cleanly uninstalled without impacting twrp.
I'm now on pacman, and it is great except for camcorder not working.
Sent from my XT907 using xda app-developers app
So if I erase system on twrp, restore to stock backup, all the changes made on ss and energy will be gone? Than just click flash and choose PAC.zip and gapps?
Sent from my XT907 using xda app-developers app
khalilcr said:
So if I erase system on twrp, restore to stock backup, all the changes made on ss and energy will be gone? Than just click flash and choose PAC.zip and gapps?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure if wiping system/factory reset will undo the partitions made via SS - but otherwise, I think you are correct. you don't need both SS and TWRP going forward. however, the only reason to have SS is to install the awesome Energy ROM (although Brandon claims to get Energy installed via TWRP just fine - so you might want to check with him). however, that ROM is based on 4.1.1. all ROMs going forward will be flashable via TWRP.
if you don't mind camcorder not working, then go with PACman.
i would recommend once you download the 5/24 PACman ROm and GApps, go into TWRP, mount everything, wipe cache, wipe dalvik, factory reset, system wipe, mount everything again, install PACman ROM, install GApps, then reboot.
if you cannot deal with camcorder not working, then you can install the base 4.1.2 component, posted on droid-hive:
http://droid-hive.com/index.php?/topic/1767-98161-base-components/
go into TWRP, mount everything, wipe cache, wipe dalvik, factory reset, system wipe, mount everything again, install 4.1.2, then reboot
once you are at a good spot, then you can uninstall SS
Thanks, finally got PAC flashed and am loving it. Camcorder not a big deal for me as long as camera works.
Thanks again for the help
Sent from my XT907 using xda app-developers app
I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app
mjobanjatt said:
I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...
Varun hellboy said:
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...
Click to expand...
Click to collapse
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
because it is a temporary cwm so you should flash it again and again for use
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
There are two types of cwm
Temporary - for users of stock kernel or custom kernel that uses stock recovery
Permanent - cwm is built into the custom kernel & replaces stock recovery
if you want a permanent cwm flash a kernel with permanent cwm (see the kernel features in it's thread)
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Flash any kernel that has integrated cwm to have cwm permanently .....
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
try hells fusion.... best kernel for SGY....
Hasn't ANYONE come up with a permanent cwm for our cute little y?!
Kobro said:
Hasn't ANYONE come up with a permanent cwm for our cute little y?!
Click to expand...
Click to collapse
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!
marcussmith2626 said:
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!
Click to expand...
Click to collapse
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Kobro said:
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
Then get another phone that has that function.
Remember, our phones are not godly, not everything-can-do phones. They are only bottom-range phones. Hardware and software limitations cause this issue. If you want to fix it, do it yourself.
But if you want to contradict yourself and say "I wanna stick to my little Y" then flash a kernel.
Which is essentially in a zip.
And then you get permanent CWM.
Problem solved.
Kobro said:
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
other phones work in a different way - for example HTC phones have fastboot and a recovery totally different from a samsung galaxy y 5360
the only way in this phone to replace the recovery perminantly is to flash a kernel that has it
GT-S5360b Problems with rom /cwm
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .
Guh18 said:
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .
Click to expand...
Click to collapse
Your download was incomplete.Re-download the whole ROM again without any data interruption.
samsung galaxy y
hi guys i want to bring back my original samsung galaxy y os. please give me the link to flash it back. thanks
S3 I9300
Pacman rom's. Nightly
Latest CWM touch
Problem I'm having is every time I try to flash the nightly update, it says update complete then when I reboot the phone goes into a bootloop and have to restore from backup.
Using CWM I have tried installing zip from SD card as well as from the external SD card.
I have wiped cache & dalvik cache after install and even tried wiping before and after zip install. Still get the bootloop.
Even tried installing using Rom Manager and get the same bootloop.
Do I need to change the file name or something? I'm kinda stuck. Any help would be great.
Thanks guys
I don't have a PC so can't flash with that.
Sent from my GT-I9300 using xda app-developers app
I'm sure about your phone, but with mine, I just waited a couple of nights for a new nightly. I'm on nightly from 11/9/13 and its been working OK. With it being a nightly, there's always gonna be problems. So I wouldn't worry so much about that, and just wait for the official. but then again, I'm no expert.
Sent from my SCH-I535 using xda app-developers app
SilentCCR said:
S3 I9300
Pacman rom's. Nightly
Latest CWM touch
Problem I'm having is every time I try to flash the nightly update, it says update complete then when I reboot the phone goes into a bootloop and have to restore from backup.
Using CWM I have tried installing zip from SD card as well as from the external SD card.
I have wiped cache & dalvik cache after install and even tried wiping before and after zip install. Still get the bootloop.
Even tried installing using Rom Manager and get the same bootloop.
Do I need to change the file name or something? I'm kinda stuck. Any help would be great.
Thanks guys
I don't have a PC so can't flash with that.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
are you using a custom kernel? if so the bootclasspath is probably borked.
Pvy.
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
THANK YOU!!
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
cambuchan said:
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
Click to expand...
Click to collapse
Glad it was if help for you!
Sent from my LG-D801 using Tapatalk
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
h
cheami said:
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
Click to expand...
Click to collapse
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
harryleplusfort said:
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
Click to expand...
Click to collapse
It sounds like you have access to recovery, so you can use adb to push or pull files from your phone. Your backup should still be on your phone, as long as you didn't wipe the internal storage.
I'd suggest pulling the important photos/videos/backup/files/etc from your phone to your computer, then wiping internal storage or wipe factory reset. Then hopefully it wont get stuck at 49%, as that is what I did for my friend's D801 to allow it to go back to stock 100%.
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Thanks for sharing! Will be useful someday
Sent from my LG G2 using Tapatalk
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
quinejh said:
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Edit your build.prop to the correct device and install the correct recovery
Sent from my LG-D802 using Tapatalk
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
quinejh said:
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Search is your friend, any app that can edit the build prop should work, please make a backup of your build prop. if you get it wrong your device will not boot.
Ok I found a thread on here about how to use file explorer to change the build prop it says there r 2 entries I need to change but my question is do I change it from d802 to vs980 or vs980b?
Sent from my LG-D802 using Tapatalk
leomd333 said:
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Click to expand...
Click to collapse
Well I could get into recovery but it did not fix the problem.
Please explain!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have same problem with my F320L. I will try your method but please explain bit more that how should i do?
In twrp, first hard reset and then do full wipe (all wipe except internal memory and do not format any thing) or describe the way please?
Thanks!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
When i go to recovery mode i only have function Factory reset...
Can you help me please ?
Hey guys, i'm kinda new to rooting(had iphone previously) and i'm having some trouble. The phone is rooted already(4.4.2), i installed ROM manager and now i dont know how to boot it to cwm recovery, every tutorial i follow it goes to stock recovery. I tried installing cwm with odin but it doesn't get through setup connection, or it does but it fails. I wanted to get the google edition ROM. Thanks in advance
Hetfield88 said:
Hey guys, i'm kinda new to rooting(had iphone previously) and i'm having some trouble. The phone is rooted already(4.4.2), i installed ROM manager and now i dont know how to boot it to cwm recovery, every tutorial i follow it goes to stock recovery. I tried installing cwm with odin but it doesn't get through setup connection, or it does but it fails. I wanted to get the google edition ROM. Thanks in advance
Click to expand...
Click to collapse
Have you tried the below app? Supposed to be good for flashing things.
https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher
Sent from my GT-I9505 using Tapatalk
what is exactly flashing kernel? is it the same as flashing cwm recovery? so confused atm
Hetfield88 said:
what is exactly flashing kernel? is it the same as flashing cwm recovery? so confused atm
Click to expand...
Click to collapse
You don't need flash any kernel for have a custom recovery. Take a look:
~ For i9500: HERE
~ For i9505: HERE
Joku1981 said:
You don't need flash any kernel for have a custom recovery. Take a look:
Click to expand...
Click to collapse
Thanks a lot man!
Edit:ahem i think i messed up, i got the custom recovery to work, then i did a wipe to install the google rom, but it failed for some reason, what do i do now?
You sound like you really don't know what you're mate.
I think the best advice anyone can give you is to put your phone down and read some more.
If you have successfully flashed CWM then all you need to do is flash a ROM of your choice then wipe data / factory reset.
Also before you even think about flashing anything to your phone you NEED to back up your EFS partition.
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
You sound like you really don't know what you're mate.
I think the best advice anyone can give you is to put your phone down and read some more.
If you have successfully flashed CWM then all you need to do is flash a ROM of your choice then wipe data / factory reset.
Also before you even think about flashing anything to your phone you NEED to back up your EFS partition.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
you're right but now, since it's in recovery mode i have to fix this asap. i entered the recovery and did wipe data/factory reset like the tutorial said, then proceeded to install zip(the ROM) but it fails E/... status 7 installation aborted.
and i did backup data and sd card but the backups are in my pc and i cant get to them in recovery mode :/
Hetfield88 said:
you're right but now, since it's in recovery mode i have to fix this asap. i entered the recovery and did wipe data/factory reset like the tutorial said, then proceeded to install zip(the ROM) but it fails E/... status 7 installation aborted.
and i did backup data and sd card but the backups are in my pc and i cant get to them in recovery mode :/
Click to expand...
Click to collapse
Don't panic bad it's just down to the version of recovery ?
Just go back into recovery & try flashing again once you get status 7 go back & second line from bottom where you chose zip you will see "allow update old binary" tick the box if not ticked or until if it's selected then select zip to flash & it'll go straight through