Related
I noticed in the advanced wifi settings the option to tick 'best wi-fi performance' it says this may use more power. Anybody know what it actually does? Also is the DHD wireless n standard without having to do anything?
What rom are you using? I do not see this on leedroid
Just the standard ROM that comes on the phone as i havent rooted.
I have a question on this also
smurcoch said:
What rom are you using? I do not see this on leedroid
Click to expand...
Click to collapse
It will be there. You have to press menu on the wifi settings page.
Yep, this definitely uses more battery, this unfortunately is a must for me since I have the phone in a case and I get very poor reception with Wifi otherwise. GPS is also weak takes ages to lock.
It's under Settings -> Wireless & Networks -> Wi-Fi Settings -> Press menu button -> Advanced and it's there.
ErOR22 said:
Yep, this definitely uses more battery, this unfortunately is a must for me since I have the phone in a case and I get very poor reception with Wifi otherwise. GPS is also weak takes ages to lock.
It's under Settings -> Wireless & Networks -> Wi-Fi Settings -> Press menu button -> Advanced and it's there.
Click to expand...
Click to collapse
So enabling it will help WiFi reception? I though it will only boost speed or something. Going to turn it on for a few days and see!
ErOR22 said:
It's under Settings -> Wireless & Networks -> Wi-Fi Settings -> Press menu button -> Advanced and it's there.
Click to expand...
Click to collapse
Thanks Haha, never really thought of pressing menu in there kinda figured that was all there was
I'm only getting about 600kBps on a 1.5mBps internet line through WiFi. Going to test this over the next few days.
Sent from my amazing phone w/ Leedroid @ 1.8GHz using XDA App.
This will activate the wlan-n mode...
But it uses lots of battery.
Sent from my Desire HD using Tapatalk
smurcoch said:
Thanks Haha, never really thought of pressing menu in there kinda figured that was all there was
I'm only getting about 600kBps on a 1.5mBps internet line through WiFi. Going to test this over the next few days.
Sent from my amazing phone w/ Leedroid @ 1.8GHz using XDA App.
Click to expand...
Click to collapse
Remember that the signal is never 100% and there is some loss in speed. I always use best wifi performance as it improves the signal and from my room which isn't too far from the router I can max my 5mbs connection which I find quite impressive. On 1.5mbps connection you should be maxing at around 170kbs.
it need more power than normal using
but, i dont know in leedroid hay rev have it
Speedtest.net with best wifi performance: 3703 kbps down 1244 kbps up
Without best wifi performance: 2909 kbps down 1214 kbps up
Makes a slight very slight difference. This was upstairs away from the router. Downstairs I can get 9-10 Mbps whether it is on or off, whereas on my laptop I can get 12-13 Mbps.
It does not apply the n-setting, because if I turn on the n-setting on my router, my phone disconnects from WiFi.
smurcoch said:
Thanks Haha, never really thought of pressing menu in there kinda figured that was all there was
I'm only getting about 600kBps on a 1.5mBps internet line through WiFi. Going to test this over the next few days.
Sent from my amazing phone w/ Leedroid @ 1.8GHz using XDA App.
Click to expand...
Click to collapse
I suppose you have a 1.5 megabit connection and a downstream of 600 kilobyte per second? One byte = 8 bit.
Because if it is like that, you should, as ErOR22 mentioned, not be able to get over 187.5 kB/s (if my calculation is accurate ^^).
If you really mean that you have 1.5 megabyte downstream you could try to get closer to the router and/or minimize the number of walls between you and your router. This should boost your speed.
battery drains real bad when you switch best performance to on and it does activite the n setting its one off HTC's power saving tricks. I have dual band router an my DHD connects fine
for signal, covering the battery cover kills wifi as thats were the antenna is.
ErOR22 said:
Remember that the signal is never 100% and there is some loss in speed. I always use best wifi performance as it improves the signal and from my room which isn't too far from the router I can max my 5mbs connection which I find quite impressive. On 1.5mbps connection you should be maxing at around 170kbs.
Click to expand...
Click to collapse
My line is 1.5mbytes not bits. I usually hit 1600kbytes a second on my upstairs computer using WiFi g and not n. I should easily be getting 1MB/s at least on my phone
Edit: just did a few speed tests, 1mBps but when doing a lan transfer, it peaks at 900kBps averaging 600kBps. This is my problem. Lan share is useless
Sent from my amazing phone w/ Leedroid @ 1.8GHz using XDA App.
smurcoch said:
My line is 1.5mbytes not bits. I usually hit 1600kbytes a second on my upstairs computer using WiFi g and not n. I should easily be getting 1MB/s at least on my phone
Edit: just did a few speed tests, 1mBps but when doing a lan transfer, it peaks at 900kBps averaging 600kBps. This is my problem. Lan share is useless
Sent from my amazing phone w/ Leedroid @ 1.8GHz using XDA App.
Click to expand...
Click to collapse
That's interesting, you got your numbers wrong again lol. On 1.5Mbs connection you say you download at 1600kbs which is 1.6Mbs lol. Funny that, on LAN you should be getting a lot more. When testing LAN are you coping from from another computer that's on wireless?
When I turn on Best WiFi Performance I idle at around 70mA and with it turned off it's under 10mA, so a huge difference but I need it unfortunately.
ErOR22 said:
That's interesting, you got your numbers wrong again lol. On 1.5Mbs connection you say you download at 1600kbs which is 1.6Mbs lol. Funny that, on LAN you should be getting a lot more. When testing LAN are you coping from from another computer that's on wireless?
When I turn on Best WiFi Performance I idle at around 70mA and with it turned off it's under 10mA, so a huge difference but I need it unfortunately.
Click to expand...
Click to collapse
=/
kb = kilobits
kB = kilobytes
lowercase b is bits
uppercase is bytes
8 bits per byte, 1024 bytes per kilobyte, etc etc
speed varies because because tv runs off the same line. ~15mb/s without any TVs going or shows being recorded and ~10mb/s or so when 2 or more are being used, but I still only get like ~6-7mb/s on the dhd, same with lan shares accessed from the device
You have your units all mixed up.
Edit: beat me to it, and with an actually informative post... hei hei
Guys
I have not been able to stream 5 secs of the transformer video or any youtube video without significant stutter and lag. I have plenty of speed with my home wifi as far as i know. I have 20+mbs with Comcast and never have issues with my wifi.
what could be wrong...is it my N7 or my router?
I'm so happy someone else has this issue. Well not happy but happy to know I'm not the only one. I have 30+ download on my home WiFi and it lags when I try to watch YouTube also. Its very annoying. It can't be my WiFi because I have tried several other devices and they work great. Hopefully an update will come and fix soon because I'm an avid youtuber. But yeah your not the only one man.
Sent from my Nexus 7 using Tapatalk 2
I was having a issue watching transformers as well, I also rented a movie using my credit and never finished it because of lag.
Sent from my Nexus 7 using xda app-developers app
try do a speed test see what's the through put you get on your device. Also, in the wifi setting, see at what speed you are connecting to your wifi router.
Speed test is 27mbps and my WiFi settings speed is 54mbps. I don't see a problem?
Sent from my Nexus 7 using Tapatalk 2
feelinfroggy23 said:
Speed test is 27mbps and my WiFi settings speed is 54mbps. I don't see a problem?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
yea, doesn't seem like any problem with your connection. Did you try streaming via other apps such as hulu or only lags in youtube?
Some thing you can try:
1. wipe youtube memory and try it again. You can even try uninstall it and download a fresh copy from the market. If still lags, try #2
2. install the flash apk and try streaming youtube via another browser such as Dolphin HD and see how it works out.
what would you suggest I use for a speed test?
using speed test.net app my speeds are
1659 kbps DL
and
4592 kbps UL
seems like i might have a router problem if that's all i'm getting on the DL
my hardwired LAN gets 24 Mbps
Rugged96 said:
using speed test.net app my speeds are
1659 kbps DL
and
4592 kbps UL
seems like i might have a router problem if that's all i'm getting on the DL
my hardwired LAN gets 24 Mbps
Click to expand...
Click to collapse
If that's the speed you are getting through a router then there is a problem, perhaps router related.
Go to wifi setting on N7, tap on your current wifi connection, it should tell you the speed you are connected. Ideally it should be 54mbps or higher depend on your setup, but based on your numbers it seems it's connected at much lower speed, below 15mbps I'd guess. My 3g dl speed is even higher than that.
use your phone or another wifi device to do a speed test again, if similar low number then check your router's wifi configuraiton or change a router.
Last night I was on Netflix watching Weeds and the only time there were any hiccups was at the beginning of the episode when Netflix was adjusting the quality to my internet connection. By the end of the theme song there was no noticeable stutters and I believe it had upgraded to HD 720p. So Netflix seems to not be a problem.
Sent from my Nexus 7
silvscorp said:
If that's the speed you are getting through a router then there is a problem, perhaps router related.
Go to wifi setting on N7, tap on your current wifi connection, it should tell you the speed you are connected. Ideally it should be 54mbps or higher depend on your setup, but based on your numbers it seems it's connected at much lower speed, below 15mbps I'd guess. My 3g dl speed is even higher than that.
use your phone or another wifi device to do a speed test again, if similar low number then check your router's wifi configuraiton or change a router.
Click to expand...
Click to collapse
oddly enough it says my link speed is 65Mbps....checking my other phones.
Rugged96 said:
oddly enough it says my link speed is 65Mbps....checking my other phones.
Click to expand...
Click to collapse
silvscorp said:
If that's the speed you are getting through a router then there is a problem, perhaps router related.
Go to wifi setting on N7, tap on your current wifi connection, it should tell you the speed you are connected. Ideally it should be 54mbps or higher depend on your setup, but based on your numbers it seems it's connected at much lower speed, below 15mbps I'd guess. My 3g dl speed is even higher than that.
use your phone or another wifi device to do a speed test again, if similar low number then check your router's wifi configuraiton or change a router.
Click to expand...
Click to collapse
My Cell phone HTC One S is even worse on wifi....352 kbps DL speeds.
I have a pretty new router. this doesn't make sense to me.
I just noticed the cap-out link speed of 65Mbps too. The manual says that the N7 is 802.11b/g/n capabile, so I figured I should see at least 150Mbps (if not 300Mbps like my laptop).
Anyone else noticing this low cap-out? Is this a software issue of the N7 or a hardware issue that I should have my unit exchanged for?
Rugged96 said:
My Cell phone HTC One S is even worse on wifi....352 kbps DL speeds.
I have a pretty new router. this doesn't make sense to me.
Click to expand...
Click to collapse
Something is definitely wrong with your wifi router.
Revelant said:
I just noticed the cap-out link speed of 65Mbps too. The manual says that the N7 is 802.11b/g/n capabile, so I figured I should see at least 150Mbps (if not 300Mbps like my laptop).
Anyone else noticing this low cap-out? Is this a software issue of the N7 or a hardware issue that I should have my unit exchanged for?
Click to expand...
Click to collapse
Normal G router will have max of 54mbps so looks like you have a N router since you are connected at 65Mbps. Some wireless N router can only output 150mbps and some will do 300mbps. Most of modern mobile device's wifi N adapter is only rated up to 150mbps however. 65mpbs is really on the low side for N network but still sufficient unless you wish to do a lot streaming withing your own network. Keep in mind that, if you have both G and N wireless device connected to your router at the same time, the link speed will be reduced depend on your router's configuration.
silvscorp said:
Normal G router will have max of 54mbps so looks like you have a N router since you are connected at 65Mbps. Some wireless N router can only output 150mbps and some will do 300mbps. Most of modern mobile device's wifi N adapter is only rated up to 150mbps however. 65mpbs is really on the low side for N network but still sufficient unless you wish to do a lot streaming withing your own network. Keep in mind that, if you have both G and N wireless device connected to your router at the same time, the link speed will be reduced depend on your router's configuration.
Click to expand...
Click to collapse
I have verified that I can connect to the router\access points in my place at speeds between 242-300Mbps no problem. I have no G devices connected. It appears that the N7 is capping out a 65Mbps.
My question was whether anyone else (other than Rugged96 and myself) is seeing this in their WiFi connection info?
Revelant said:
I have verified that I can connect to the router\access points in my place at speeds between 242-300Mbps no problem. I have no G devices connected. It appears that the N7 is capping out a 65Mbps.
My question was whether anyone else (other than Rugged96 and myself) is seeing this in their WiFi connection info?
Click to expand...
Click to collapse
I guess N7 will have a max of 65mbps just like most of the phones out today mainly due to the single antenna. To get higher N speed you need multiple antennas (MIMO)
I won't be able to deconstruct my router until later tonight. I am working from home and need to stay focused....
silvscorp said:
I guess N7 will have a max of 65mbps just like most of the phones out today mainly due to the single antenna. To get higher N speed you need multiple antennas (MIMO)
Click to expand...
Click to collapse
So it is a limitation of the physical hardware...That is good to know. I was worried that something was wrong with my tablet.
Thanks!
Man that is BS!!!! Your telling Me I can't watch an HD movie on YouTube because the tablet went let me??? Why do they even have the option to go HD then? My internet pushes out 35mbps. That should be more then enough to run HD.
Sent from my Nexus 7 using Tapatalk 2
No problems here. Watched transformers Friday night with no problem. Sunday my wife used the timewarner app to watch NASCAR. I have even used the watch ESPN with no problems tethering from HOX. Not saying its not your N7 but it sounds like a problem with your network. Unplug cable modem for a min or do a reset through the GUI. Maybe reset the router while at it.
Sent from my Nexus 7 using Tapatalk 2
Does anyone notice there's a big bug with WiFi on the G2?
I have 2 WiFi ac routers, one at home and one at the Office, an Asus RT-ac66U and a Linksys ea6700. Both capable of 1750mbps max speeds.
Internet speeds are 120/6 and 200/20.
Scenario is exactly the same for both routers;
When fresh reboot the router, G2 connects at a speed of 433Mbps.
Speedtests show results of 119/6 at home and 190/20 at the office.
Great you would say!
But here goes. Once WiFi get disconnected and reconnected, speeds go down to ~40mbps. No matter what I do!
These are N speeds, not AC
When looking at connection settings it still shows a link of 433mbps
Tested dozens of times, on both routers, so it has to be an issue with the G2.
Anyone else noticed the same??
DAMN, should have been in Q&A, mods plz move
I'm not an expert on wi-fi, but have stumbled through setting up several routers around the house. But I do not have an ac router.
Is the home router in mixed mode? Ignoring a/b/c for a moment and focusing on g and n (and implying ac), I have two wireless routers in the house. One runs N only (but both 2.4 ghz and 5 ghz) and the other runs G only. Now, my N router is capable of running in mixed mode (to handle both N and G) BUT in mixed mode, my max speed when connected in N is lower than it would be if I ran in dedicated N mode.
Most of my devices now are at least N (2.4 or 5) but I have an older printer and wii that only do G. But as mentioned above, rather than run my best router in mixed mode, I run 2 separate routers, one in N only and one in G only.
Maybe something similar might help with your ac speeds?
Really appreciate your input!
But I already tried settings like AC only etc. Doesn't make any difference.
Once connected for the second time and up to the router no more AC speeds...
Sent from my LG-D802 using XDA Premium 4 mobile app
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
jasonsf said:
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
crashN2u said:
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
Click to expand...
Click to collapse
@jasonff
Don't know about an app to test lan speeds unfortunately.
Think a google search would come up with lots of options.
@crashN2u
I leave my wifi on too all the time for now, it keeps it at full speed then.
There's no way to check which band you are connected to.
Router doesn't have an option to choose AC Only, only N +AC
And in the mean time I have tested it with 4 AC routers, Asus RT-AC66U, Netgear R6250, Linksys EA6700, D-Link 868L.
With all routers exactly the same conclusion. First time everything is great. Excellent speeds. If you never turn off WiFi it remains at high speed.
But once you turn off WiFi on the Phone and turn it back on it immediately drops to ~36-40mbps max (N Speeds).
This remains until I rebooted each router and after that full speeds again.
It must be something in drivers LG used.
There's the solution to for, I'm sure of it by now.
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Klotar said:
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Click to expand...
Click to collapse
My Phone is packed with tools like Wifi Analyser, InSISDer etc etc atm
I always separate 2.4 and 5ghz networks to be able to see exactly what's going on but thanks for the heads up :good:
From further investigation and thinking, and with your suggestion about stronger signals;
Thing is, AC routers are more or less all simultanious routers.
That combines 2.4 and 5ghz signals for higher transfer speeds.
I think in there lies the problem when drivers are not 100%.
In theory 2.4 signals are stronger then 5ghz signals and have wider range.
But in testing I made sure that I was in the same room and no more than 2 meters away from the router.
when testing it showed equal signal strength up to -20 so really strong signals.
Therefore I concluded that N on 2.4 whas equally strong as 5ghz and then again I isolated 5ghz SSID so that's not it unfortunately.
I promised to stay away but I can't resist!
Have you tried some of the more generic troubleshooting tips (on the home network), such as trying with no security or lesser security (WEP) to see if it still reconnects at the lower (N) speeds? I realize that usually that test is of course for a more basic issue than yours but maybe the G2 has trouble handling security overhead.
Some devices and routers just don't like each other (as many know), but 4 different routers...?! Gotta be the G2 side, as you've surmised. Wish I knew someone with an ac router so I could test myself. I'm debating on getting an ac router but you've got me spooked! (kidding/teasing)
Well haven't tried lower or no security.
When I have the chance (aka the wife is away and not *****ing about wifi not available ) I'll sure try that.
But I don't think that WEP will be an option because AC requires AES protection if I'm not mistaken.
But really do not be afraid to get yourself an AC router hehe.
No honestly, I've tested 4 routers with:
AC Capable:
HTC One. Goes all the way to max isp speeds. All the time, no issues
LG G2.
Not AC Capable.
IPhone 5. Max speed at 5ghz (constantly tested) is ~90-100mpbs.
HTC One X. Max speed at 5ghz (constantly tested) is ~70-90mpbs.
So even if your hardware maybe not be capable of AC speeds you still get excellent connections
Oh and for the record.
Here's my personal listing of the hardware I've tested. From best to well not so good.
1. Netgear R6250.
Excellent constant speeds. No drops whatsoever with around 6 devices connected. Excellent range!
2. Asus RT-AC66U
Shame Asus introduced a new wifi driver some time ago which doesn't perform that well. Constant speed drops.
They know about it but thusfar no solution.
When you get this one, stay on old firmware for now!
3. D-link 868L
Real looker this one. Can be put in plain sight in the room like a picture frame :silly:
Great constant speeds, but some drops here and there.
Excellent range.
4. Linksys EA6700
Linksys is sold to Belkin by Cisco.
Up to now I have never seen anything good coming from Belkin!
What a piece of crap.
With a really thin wall between router and phones coverage went down more dan half. Hell even when distance less than 2 meters away coverage was about -45.
Do not get this crap!
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Klotar said:
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Click to expand...
Click to collapse
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
LittleH79 said:
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
Click to expand...
Click to collapse
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
jasonsf said:
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
Click to expand...
Click to collapse
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
LittleH79 said:
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
Click to expand...
Click to collapse
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
jasonsf said:
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
Click to expand...
Click to collapse
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
LittleH79 said:
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
Click to expand...
Click to collapse
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
jasonsf said:
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
Click to expand...
Click to collapse
What router or AP do you use?
/s
shaglord said:
What router or AP do you use?
Click to expand...
Click to collapse
Asus RT-AC66U
jasonsf said:
Asus RT-AC66U
Click to expand...
Click to collapse
Wow and do you really see real transfer rates of 25-30 MB/s to your G2?
I'm using a Qualcomm Atheros based AC-router and my G2 (running latest CM11) hardly goes over 10 Mbit ~ 1,5 MB/s. Weak I know. (Confirmed 433 Mbit link using a wifi app.)
Maybe I need a broadcom-router like yours to see some real AC-speeds.
Thanks for the reply. Take care
/s
I have discovered that my US996 Unlocked and rooted device has typical down/up speeds of 90d/55u when the phone is not being charged. When the phone is connected to a charger the typical speeds are 400d/270u. This is very repeatable. The phone is 3 feet from the router. am using speed.net and the ping is 4 to 5 ms for both configurations. If I start the test with no charger and plug the charger in during the test the speed increases dramatically to the higher values. The verizon.net speed test for the router on my gigabit plan was fairly consistent at 948d and 931u. Is there a way to get the higher WiFi throughput while not connected to a charger?
Which router are you using btw ?
90 Mbs down seems like single stream N, on 2.4Ghz
400 Mbs down is single stream AC at 5Ghz
Can you check what your link speed says in the wifi props on the phone
the single sim V20 is dual stream so you'd expect a doubling of that speed, should be able to do 800Mbs on AC and 180 Mbs on N at 2.4ghz with a dual stream router which most are these days.
The dual sim V20 is unfortunately single stream so my max speeds are 90 & 400Mbs instead of being twice as much
I don't understand why you get a difference in speed in the first place. Should not matter plugged or not
I'm using the Vz provided G1100 gateway router. Link speed on the phone says 866 Mbps. I'm at a loss too - probably a phone hardware problem. BTW, I'm still on US99610d deodexed ROM with Xposed and other mods that I wouldn't THINK would cause the problem, but....
PhoneBill said:
I'm using the Vz provided G1100 gateway router. Link speed on the phone says 866 Mbps. I'm at a loss too - probably a phone hardware problem. BTW, I'm still on US99610d deodexed ROM with Xposed and other mods that I wouldn't THINK would cause the problem, but....
Click to expand...
Click to collapse
Bolded bit implies your connection is good. Dual AC which i was expecting.
It's possible LG ramp down speeds to conserve battery. Not an issue with general use only with downloading
Bolded bit? Sorry, but I don't know what bit you are talking about. I remember seeing nothing bolded in anything wifi (settings). My router lists my V20 connection as "802.11ac" and I see nothing indicating any problem. But the phone still has the problem. I'm wondering if there could be an antenna problem and the charger conection acts as an extra antenna? Obviously l'm groping in the dark now.
Is the phone's MODEM speed limited to about 50mb/s?
My internet speed is 70mb/s as measured on my computer WiFi connected to my router. The max speed the phone is showing is 48-49mb/s while sitting right next to the computer.
Is there a (build.prop) mod that can speed up the phone's WiFi speed? The phone is rooted.
Your computer could be using a different wifi band than your phone. Computer's speed often differ from the phone. Also both the devices have different types of antenna and operating power levels. I don't think messing with the build.prop would do much.
Let me ask the question differently. Is anyone getting faster than 50mbps on this phone? I am not.
The phone is rooted running 2/1/19 update OEM ROM Potter. Router b/g/n broadcasting at 2.4gHz only. Internet download speed is 90-100mbps on the computer. Phone and computer speeds measured 2 feet away from the router using the same Comcast speedtest app..