How can I connect my phone with a pendrive using usb otg??
Please hit the Thanks button..
b_dog said:
How can I connect my phone with a pendrive using usb otg??
Please hit the Thanks button..
Click to expand...
Click to collapse
You should have googled before asking such question,there was no need to create a new thread for the same topic
Your answer :
You need a y shaped cable, google it
You need a otg patched kernel, its in Android section thread by @justvarshney
you need a laptop.
Search for videos how to setup and how does it work.
Related
Hello!
The problem is when I connecting the phone to PC with usb cable( tried different ones) it writes me "The device does not support usb headset. please remove it." Cleaning the port and hard reset didn't help me.
I use official rom.
any help will be appriciated.
taypen said:
Hello!
The problem is when I connecting the phone to PC with usb cable( tried different ones) it writes me "The device does not support usb headset. please remove it." Cleaning the port and hard reset didn't help me.
I use official rom.
any help will be appriciated.
Click to expand...
Click to collapse
Try updating usb drivers and then rebooting pc.
thanks for replay but in the page you gave me said that in bootloader when i connect must be writen usb but it still serial... maybe the problem not in the drivers?
taypen said:
thanks for replay but in the page you gave me said that in bootloader when i connect must be writen usb but it still serial... maybe the problem not in the drivers?
Click to expand...
Click to collapse
Have you checked activesync settings? i.e. 'allow usb connections' in connection settings?
Just did a quick search and also found these threads:
http://forum.xda-developers.com/showthread.php?t=533910&highlight=drivers
http://forum.xda-developers.com/showthread.php?t=538018&highlight=drivers
Hello guys..
I think my question is a bit easy for you, but im gonna ask it anyway: is there i file that i can install so my usb headset from the HTC Diamond(the one with all the controls) can work with my TouchHD?? Because when i insert it it says that i cant recognise usb headsets.. If there is such a file, can you tell me the download link??
Thnx
No.
See here: http://forum.xda-developers.com/showthread.php?t=457340
Hi guys i have problem in bootloader after installing windows 7.. i want to flash mag then recovery and flash android rom again..but it stays in serial after connecting usb cable.... no usb! i have formated the sd card with nokia and i cant move on!!!!im stuck here 1 month!!!!
(qualcomm cdma technologies msm) see the pc..
wrong place to post but he is in trouble, if we can help, then do it.
Here is my suggestion: Check your USB driver for the PPC or install ActiveSync. I think the issue is only your PC doesn't recognize the windows 6.5 handheld device.
huhjun said:
wrong place to post but he is in trouble, if we can help, then do it.
Here is my suggestion: Check your USB driver for the PPC or install ActiveSync. I think the issue is only your PC doesn't recognize the windows 6.5 handheld device.
Click to expand...
Click to collapse
.........how?? its easy????
I fix it i found it.......you where right both of you.....hehe.....now im happy..... thank guys......sorry for the violention of rules...
110718 said:
.........how?? its easy????
Click to expand...
Click to collapse
not sure what the problem was...u need activesync?? http://www.microsoft.com/download/en/details.aspx?id=15
walidhazem said:
not sure what the problem was...u need activesync?? http://www.microsoft.com/download/en/details.aspx?id=15
Click to expand...
Click to collapse
Yes...thank you...
Moved. Please use the report button or send me a PM. Thanks
1, change an other usb cable...
2, u need a correct usb drivers..
My mass storage is not working, I'm running the Hyperion rom, and this is really getting on my nerves now, I've enabled and disabled USB Debugging, I've installed and re-installed Samsung Kies (their stupid little piece of bad software that shouldn't be needed)
WHY ISN'T THIS A SIMPLE BLOODY PLUG AND PLAY?!
Boncey said:
My mass storage is not working, I'm running the Hyperion rom, and this is really getting on my nerves now, I've enabled and disabled USB Debugging, I've installed and re-installed Samsung Kies (their stupid little piece of bad software that shouldn't be needed)
WHY ISN'T THIS A SIMPLE BLOODY PLUG AND PLAY?!
Click to expand...
Click to collapse
Does ur pc recognise ur phone? If not try another usb cable or another usb port. Also try another USB device to see if works
Sent from my GT-S5360 using xda app-developers app
simply download samsung drivers ..
not kies...
works 100% nd save a lot memory and time and controls abusive language towards kies software...
rooting is new for me...and i am noob to root...
Link to drivers? And my PC doesn't know what the device is, also other USB devices work too...
Boncey said:
Link to drivers? And my PC doesn't know what the device is, also other USB devices work too...
Click to expand...
Click to collapse
yeps...
its because of the drivers not installed..
sry i cant give u the links now..
but u can refer to sir doky's thread..
it is given there...
rooting is new for me...and i am noob to root...
Try turning off usb debugging. The problem only persist if I use hyperion rc5 blablabla. No problem for hyperion 7
Plug in usb
Open status bar
I press the usb thingy
Press the cute android
Wait 20 seconds
It should work now
Though I still have to state that
ALL YOUR CHEESE BELONGS TO ME!
Try to update your usb driver..
Try to install latest samsung kies and samsung driver...
Other way : in your pc, open device and printer > right click pc icon and choose troubleshoot and use troubleshoot to your thunderbird device.
I hope it can help you
Sent from my GT-S5360 using XDA Premium.
Correct me if i'm wrong.
Does anyone of you know how to run an mouse on samsung galaxy s3 neo with cm 12.1?
I mean on custom rom it is possible?
motionsnk said:
Does anyone of you know how to run an mouse on samsung galaxy s3 neo with cm 12.1?
I mean on custom rom it is possible?
Click to expand...
Click to collapse
Yes its possible. Connect via OTG cable or if you have a BT mouse, whell you know what to do with a BT mouse.
paulo boë said:
Yes its possible. Connect via OTG cable or if you have a BT mouse, whell you know what to do with a BT mouse.
Click to expand...
Click to collapse
Well i have a s3 neo gt i19301i and cm 12.1 but it does not read my mouse..i have otg but nothing happens :/
motionsnk said:
Well i have a s3 neo gt i19301i and cm 12.1 but it does not read my mouse..i have otg but nothing happens :/
Click to expand...
Click to collapse
Weired....
paulo boë said:
Weired....
Click to expand...
Click to collapse
I know...any ideea how can I make it work?
motionsnk said:
I know...any ideea how can I make it work?
Click to expand...
Click to collapse
Not now. I need to put my phone away. Parents....
Ok ..wish you all the best
motionsnk said:
Does anyone of you know how to run an mouse on samsung galaxy s3 neo with cm 12.1?
I mean on custom rom it is possible?
Click to expand...
Click to collapse
OTG Does not work directly on the s3 neo because the usb port doesnt have enough power, you can try to use a external powered otg cable.
Or do it like me:
There is an APP which can enable otg, required ROOT privileges, and you can use USB stuff like:
USB-Mouse, USB-Keyboard, USB-Stick(i tested 1-16GB), USB-HardDrive(ex. 500gb external usb HDD), Charge an other device/phone/Bluetoothspeaker, and so on.
App required ROOT privileges!!!!!
https://forum.xda-developers.com/galaxy-s3-neo/themes-apps/otg-enabler-t3423727 (I'am using this)
or you use: https://forum.xda-developers.com/galaxy-s3-neo/themes-apps/root-neotg-otg-enabler-t3438645 (not tested by me, just read the comments)
On the app(first link) You just install it and open it, tap the switch, allow su access, and you'll see your device getting Charged(Top left power led is glowing), and usb devices do work. If you'r done, just tap again the switch and use it normally and yes you can close/minimize the app while otg is enabled
Don't Charge your Device, i dont know what can happen so dont try it, may be nothing happens but i dont want risk my device!
Sorry for my weak english(-grammar)
PrevosHD said:
OTG Does not work directly on the s3 neo because the usb port doesnt have enough power, you can try to use a external powered otg cable.
Or do it like me:
There is an APP which can enable otg, required ROOT privileges, and you can use USB stuff like:
USB-Mouse, USB-Keyboard, USB-Stick(i tested 1-16GB), USB-HardDrive(ex. 500gb external usb HDD), Charge an other device/phone/Bluetoothspeaker, and so on.
App required ROOT privileges!!!!!
https://forum.xda-developers.com/galaxy-s3-neo/themes-apps/otg-enabler-t3423727 (I'am using this)
or you use: https://forum.xda-developers.com/galaxy-s3-neo/themes-apps/root-neotg-otg-enabler-t3438645 (not tested by me, just read the comments)
On the app(first link) You just install it and open it, tap the switch, allow su access, and you'll see your device getting Charged(Top left power led is glowing), and usb devices do work. If you'r done, just tap again the switch and use it normally and yes you can close/minimize the app while otg is enabled
Don't Charge your Device, i dont know what can happen so dont try it, may be nothing happens but i dont want risk my device!
Sorry for my weak english(-grammar)
Click to expand...
Click to collapse
No problem
Thanks for the tips :fingers-crossed: