can anyone help me to disable headset function? I have a problem, that my headset jack is broken and remained on output. and I can't take off the broken jack from my phone. so my phone always detect that headset is connect. and because of that I can't play music, video, etc..cause the system detect that headset is connect, the status bar shown that headset is connected, and whenever I play a music, it played on headset. but my headset is broken. and if i calling someone i must call in loudspeaker, it's too bad. how can I disable these headset? can anyone help me? thanks before
disassemble the phone and get the headphone jack out , or send it to repair and replace the whole jack
Related
Hi guys,
can somebody please help me with the following problem?
Out of nothing my T-Mobile MDA Vario stopped giving sound with out the headset connected. without any reason and the out of nothing it stops giving sound without the headset connected. this all happends after i installed tornado (a2dp) to get sound to my bluetooth headset. anyone knows whats gone wrong, i search the forums here but couldnt get no clear answers
I had a similar problem. No sound from the speakers at all, but through the headset it was fine. As if the speaker itself was dead. But it wasn't caused by any Bluetooth fault.
Effectively, the phone hadn't realised that the headset had been unplugged. To solve it I was told to rapidly pummel the headset jack with the headset plug. Somehow, after some time, the phone is jogged back into a working state.
then whats the point havina bluetooth headset if u have to carry ur handsfree to get ur fone ringing again normally aint there any better solutions to this
Is there a way for audio to be muted when the connection between my hermes and the headset is lost. It is really annoying when I walk out of range of my cell at work or the battery runs out on my headset to have the music blaring out of my cell phone. Does anyone know if this is possible?
I would want/need an application w/c has a profile capability that will allow audios(call, microphone, mp3) to be redirected to both the wired earphone and at the same time spearphone or the phone itself, while the wired earphone is still plugged in. The audio needs to come out or the sound should come out on both the wired earphone and phone or speakerphone. I need this while driving and my wife needs to hear the message from the party being called or called upon. Or if I'm listening to a good music on my wired headset only, but later on would like to share it to everybody while driving again. I need to be able to toggle it easily. I've seen phoneweaver and phonealarm but these two does not fit the need describe above. If there is none existing, can somebody create this very simple app for my need? I'm willing to donate if ever. Btw, my unit is an O2 Xda Atom and I got this idea from the build in FM radio build in application that has this button w/c allows audio on both wired headset and phone. It does not work on calls and turning the radio always on drains the battery. And the wired headset acts as the antenna. Thanks in advance.
Hey guys
I know this will sound as a silly question, but is there a way for me to enjoy listening to my music through my bluetooth headset?
Thanks
What do u mean?! HD supports A2DP, so yes technically u should be able to...
how do I do that then ?
thanks for your help
Turn on bluetooth and pair it with your headset. Also, make sure you have beam activated
You have to have a Stereo Bluetooth Headset. Google it if you don't know what one is.
Search for "BT Audio". works on the HD.
use acbtoogglebt
use ACBtoogleBT
http://www.acbpocketsoft.com/Products/acbToggleBT/acbToggleBT-Free--3.html
works great even if u do not have stereo bluetooth. It sends all speaker sounds to headphone.
Be aware tough that this mode switches off once call is received and BT headset becomes normal so U have to toggle it again. If you are in the middle of watching movie you have to restart the movie programme to get the sound over headset.
But works great. I use it to watch TV serial and podcast while walking my DOG everynight
Blutooth Sterio Headphone
There are many Blutooth head sets which are large. If you want a regular sleek Blutooth handsfree you may try Plantronics Voyager 855. It is a small Blutooth handsfree with an ear stud which can be converted into a blutooth sterio head set by attaching a small chord with ear stud to the other ear. It works well. Steri quality is good.
http://www.plantronics.com/north_america/en_US/products/mobile/bluetooth-headsets/voyager-855
Sorry if this has been asked before, but i had a look and couldn't find what i'm after.
Basically, my HD2 connects automatically to my car's bluetooth handsfree kit. My handsfree kit doesn't support A2DP so I still need to use the headphone socket to listen to music from the phone through the stereo. However, if the phone has paired with the car, the headphone socket doesn't work and the stereo thinks I'm getting a call when i try and play music.
Is there any way I can enable music through the headphone socket while the phone is paired to the handsfree kit?
Thanks!
anyone? it's really annoying!
This may not be the answer your looking for but have you tried cutting out the middle man i.e. the BT handsfree kit. Just use your phone and it'll patch a call thru the headphones and cancel the music.
Saves removing the headphones each time you get a call.
In BT manager, when you select your car device, what services do you have? If there's a stereo one, untick it.
Nope, just the headset profile. I've also tried turning on/off the option to send system sounds over bluetooth, but no joy. It just seems that as soon as it connects to the car, the headphone socket is disabled.....
OK, so I think the problem was either the tape adapter I was trying to use was playing up or during my messing about with settings I changed something.... either way it appears to be ok with headphones so should be fine with a line in