Anyone having the problem with the multi task button (the one on the left of the home button) be too sensitive? Whenever I watch videos with my phone horizontal, and i touch the bottom of the phone below that multi task button (right next to the bottom microphone), it would engage it. Constantly. It's so annoying because Its hard to hold the phone any other way when holding it sideways with one hand.
Have you turned increased sensitivity off? I had the same problem until I turned it off.
Related
ever since i got my hd2, i've got this really annoying problem: when i make a phone call and hold the phone at my ear, it's supposed to shut off and lock the screen using the approximity sensor. but often, this wont work right, the sensor keeps enabling/disabling the screen, causing me to unwillingly press this football-field-sized "end call" button or to activate the phone pad and pressing those buttons.
this problem seems to occur more often when holding the phone at my right ear then at my left.
anyone know a solution? (maybe keeping the screen shut off during the whole call until pressing the windows button or something?)
The screen on the my streak has been slowly degrading, to the point where i can barely do basic functions of the phone. It doesnt register touches or swipes a large percentage of the time. If I long press on the background to bring up the add shortcut widget popup, it usually will bring the phone back to 85% function. But if I lock the screen and try again, I have to go back to longpressing until I can click apps.
Often presses will register along the top bar and bring up the notification screen or short menu when I am clicking anywhere but on the top. It has happened several times while typing this.
Has anyone had Touchscreen problems with their Streaks?
Sent from my Dell Streak using XDA App
Do you have a screen protector on and maybe some debris between it on the screen?
I'd recommend aligning the screen.
User Manual said:
If necessary, you can calibrate your touch screen as follows:
1 Press and hold the power button and then touch the Power off option on the screen to turn off the device.
2 Simultaneously press and hold the volume up button and volume down button .
3 Without releasing the volume buttons, press and hold the power button , until the device turns on the configuration screen.
4 Press the volume buttons to move the highlight bar on the screen to the Screen calibration option.
5 Touch the Camera button to start the touch screen calibration. 6 Wait for the device to reboot.
Click to expand...
Click to collapse
Also you could enable the debuging mode by typing in *#*307#*#* in your dialer, then in your app list you should see some new apps.
Open up Dev tools the select Pointer Location
Also another one is EmList and then select "Touch_Panel" theres a handful of diagnostic tools there that are pretty fun to mess with to see if something is physically wrong with your screen
Oh and to hide/disable debugging mode, just type in *#*308#*#*
I do also have some screen issues i had 8105 went back to 8023 and was working fine until today that it was acting up, but is better than 8105 which only let me touch half the screen, now it lets me do about 80% of the screen from bottom to top. I do have a screen protector, when I was running 1.6 didn't see this issue. Also i noticed that sometimes when my fingers are a bit sweaty the touch input doesn't work that well.
No screen protector, stock 1.6. Will try debug, thanks.
It happens with sweaty hands with dry hands its just messed up.
Sent from my Dell Streak using XDA App
I just used the 6 step block method and it seems to have solved my issue. Help very much appreciated!
Sent from my Dell Streak using XDA App
How long did it take to reboot after you hit the camera button?
I had to do mine yesterday as the lower part of the screen wasn't registering touches properly, as if it was about 50 pixels out.
First time round it didn't boot up with the volume keys held so i popped the battery off and started again (seems to be a common issue with this device). Then it was pretty much as standard for the boot. Keep the buttons held til the menu pops up, choose calibration, leave it until it says it's done and then reboot.
Again, should reboot as normal but if it doesn't try popping the battery off. The rear cover seems to cause a fair few issues with this!!
oh and running the calibration fixed the issue for me!
How many of you have faced the problem:
The power button is too out of reach to bring the phone out of standby. I used Xperia x10 earlier and the phone will show the lock screen once the middle button is pressed.
However for the Desire HD, i have to somehow press the annoying power button for it to display the lock screen.
Cant there be any other button which can shopw trhe lock screen cuz to reach the power button is not so handy.
Set your screen timeout to something quick. It will lock itself then.
I don't really have this problem as have biggish hands, but I can imagine what it'd be like.
Locking is not the issue.
Unlocking is the issue. To bring the phone out of standby and to show the slide to unlock screen, one has to press the "OUT OF REACH" and designed to "AVOID ACCIDENTAL" press button at the top.
I mean the top button is already a accidental press proof position. It really is a task to first press it ans then unlock the phone. Thats 2 procedures just to make a call.
Can some one mod this?
Annoying Touch buttons
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Never been an issue for me, although i was anticipating problems with no hardware buttons its been fine...
Pepper90 said:
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Click to expand...
Click to collapse
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
iam the only one who has the problem that he accidently hits a touch key while using the phone or playing a game? every little contact triggers the keys. i.e. if i use the thumb to type a message, holding the phone in the right hand, i sometimes trigger the search key.
my idea is to make it harder to trigger these keys. as they are part of the touchscreen, it sould be possible to do anything that can be done with the touch sreen. my ideas:
1. double-touch; tapping the key 2 times (like a double-klick) triggers it once
2. sweep; i.e. you touch the home-button and sweep out of it, then release. can be even harder with sweeping out and back in.
3. circle-touch; making a little circle over the button triggers it.
other ideas welcome.
---------------------------------
2nd problem: easier unlocking;
i feel it sometimes tricky to unlock the pone, wich is done by pressing the powerbutton at the top of the phone and sweeping on the bottom of the screen. the phone is'nt very small (or i have small hands). if iam holding the phone at the bottom, i can nearly reach the whole touch area with my thumb, but to unlock, i need to use my 2nd hand or to juggle the phone so i can reach the power button with the right hand. with the G1, which had a menu button at the bottom, it was just double-pressing that button and the phone was unlocked. iam looking for a similar easy way to do it.
its just annoying to take the phone out of the pocket and use both handy or juggle around to unlock it...
i dont know it it wastes additional energy to have the touchscreen active, so it can be used to unlock the phone. so my ideas:
1. use the touchscreen to unlock; i.e. draw a pattern, press the bottom key in some order (home, back, menu to unlock)
2.1 use the volume keys. if the screen is disabled, they are used to change the audio volume (or is that only the case, if music is playing?) When holding the phone at the bottom with the right hand, the volume-down hey is easily reachable. so you can do volume-down (which activates the screen) and then slide on the screen like you would do if you have pressed the power button. pressing volume-down with deactivated screen does not change the volume, but pressing it twice does (i.e. 1st press unlocks the screen and 2nd press takes volume down).
2.2 press vol-up and vol-down at the same time to unlock the phone. if i do that the phone vibrates sometimes, no idea why.
3. use acceleromater (or a other sensor?) to unlock, i.e. shaking the phone in a special way (i.e. a circle), activates the screen, so you can unlock it by sliding on it. also full unlock by shaking a phone could be possible (also known as kung-fu-unlock )
other ideas also welcome.
Proximity sensor for unlock when taking it out of the pocket :-D. I have the same problem as you so a 'fix' would be nice
yeah, you take the phone out of the pocket and it unlocks and says "hello raw, how you are doing?".
but that would be nice. question is if constantly checking the prox sensor would drain the battery much. it needs to be checked every 3 seconds or so.
lynxboy said:
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
Click to expand...
Click to collapse
if i try to use the phone with one hand
seems like here (http://forum.xda-developers.com/showthread.php?t=854073) is another user with that problem.
same problem: http://forum.xda-developers.com/showthread.php?p=9550179#post9550179
Merged threads as topic is similar....
Cheers,
M_T_M
Hello all,
I have a question regarding the Samsung Omnia 7's home button and its responsiveness. I've heard some say that it's not very responsive, and that it takes a few presses for for the device to respond. Is this true? How responsive is the home button?
I've been using it for 2 weeks now and have no problems with the home button
Sometimes I have this issue. Thinking about sending it back for repair if the problem persists/gets worse. Curious fact: If you press hard at the bottom of the device, while pushing the windows-button - it won't react at all.
Make sure that you are not covering the light and proximity sensor..
You can experiment it by placing your hand on top of the phone and press the home button.. You will notice that the screen doesn't turn on!
That was it. Covering the light sensors at the top right disables the home-button. Very understandable given that you don't want it to turn on in your pocket.
strandoe said:
That was it. Covering the light sensors at the top right disables the home-button. Very understandable given that you don't want it to turn on in your pocket.
Click to expand...
Click to collapse
But isn't that the point of having a lockscreen? what are the chances of pushing the home button, and sliding up the lockscreen in your pocket?
The power button wakes it up even if the sensors are covered, so it seems having this feature on the home button is an unnecessary annoyance.
For what it's worth...I don't want to have an empty battery just because something in my pocket pressed the home button and the screen lit up.
This feature is good -why should I press the home button when the proximity sensor is being covered?
Sometimes the home button is not responding at all. Only a reboot helps. Anyone with similar problems and a solution? Or is this a wp7-bug.
c2d said:
Sometimes the home button is not responding at all. Only a reboot helps. Anyone with similar problems and a solution? Or is this a wp7-bug.
Click to expand...
Click to collapse
Read the posts above.
It's not a bug. The home button will not react if the LIGHT SENSOR is covered. It's designed that way, so if the button is pressed in your pocket your phone won't turn on and waste battery.
Try in a well lit area and do not cover the sensor at the top of the phone. The home button will work exactly the same as the lock button then.
If the sensor is covered, the home button won't react. If it's not, then the home button will.
End of story, moving on...
Gp. said:
Read the posts above.
It's not a bug. The home button will not react if the LIGHT SENSOR is covered. It's designed that way, so if the button is pressed in your pocket your phone won't turn on and waste battery.
Click to expand...
Click to collapse
So in theory, if you are in a pitch black room, your home button will not turn on the screen? Don't think so.
........It's not the light sensor, it's the proximity sensor.
Gp. said:
Read the posts above.
It's not a bug. The home button will not react if the LIGHT SENSOR is covered. It's designed that way, so if the button is pressed in your pocket your phone won't turn on and waste battery.
If the sensor is covered, the home button won't react. If it's not, then the home button will.
End of story, moving on...
Click to expand...
Click to collapse
Sorry but that is simply not true (so not end of story....) I actually just tried to lay down my phone on a table and then cover the whole top of the phone with my hand (also tried with a piece of thick paper) so the sensor is covered. Then I tried to press the Home button, well it still works on my Omnia 7. I always return to the homescreen or my turned off screen will turn on - even with the sensor in the top covered completely - but what I cant is to scroll in the tiles or anything on the screen (sometimes), seems the sensor disables all my touch on the screen, but not the hardwarebutton Home in the middle - if you dont believe it, I could create a video of it.....
EDIT HERES A VIDEO:
http://www.youtube.com/watch?v=czRqo8-UEj8
I've had such a problem ... the home button not responding ...
also in conversation I could not hang up call, just a black screen would remain. Only remove the battery worked. when I got the jig, I put the new software and have no further problems