Database Users

[Q] KDZ not working after Instaled v20a

I have LG L7 P705 v10e and recently update to v20a with Rusian kdz.
It doesn't working smooth with My LG, so i wanna back to stock firmware and try using cm10.
I try to instaling v10e, v10k, v10k (blackedition) with english kdz but it cannot detect My phone or error in extracting.
Some other also have the same issues..
Please anyone who mastered this stuf helping and give any solution to Me and others..
Thank You

gefademe2d said:
I have LG L7 P705 v10e and recently update to v20a with Rusian kdz.
It doesn't working smooth with My LG, so i wanna back to stock firmware and try using cm10.
I try to instaling v10e, v10k, v10k (blackedition) with english kdz but it cannot detect My phone or error in extracting.
Some other also have the same issues..
Please anyone who mastered this stuf helping and give any solution to Me and others..
Thank You
Click to expand...
Click to collapse
What error does it show? Lparam error? Can you post the log? (There is an option to save it).

moulwxtos said:
What error does it show? Lparam error? Can you post the log? (There is an option to save it).
Click to expand...
Click to collapse
Thank You for responding My Issues..
Heres the log
14:15:23 : Launching SW update
14:15:23 : Unpacking KDZ
14:16:21 : KDZ file extraced
14:16:39 : Files were extracted.
14:16:39 : LGMobileDL Load.
14:16:39 : Port = -1
14:16:39 : Connecting to phone
14:16:39 : PHONE WAS NOT FOUND!
14:16:41 : ===FINISHED===
Phone was detected by MobileGo but LG PC suite and KDZ was not found my phone.
I try for DIAG, CS_Emergency and also when it on Emergency Mode (yellow screen)
All do nothin.
I Found anyone talking that v10k which can replace v20a
I'm running windows 7 64bit. Is that a problem with EN_KDZ?

gefademe2d said:
Thank You for responding My Issues..
Heres the log
14:15:23 : Launching SW update
14:15:23 : Unpacking KDZ
14:16:21 : KDZ file extraced
14:16:39 : Files were extracted.
14:16:39 : LGMobileDL Load.
14:16:39 : Port = -1
14:16:39 : Connecting to phone
14:16:39 : PHONE WAS NOT FOUND!
14:16:41 : ===FINISHED===
Phone was detected by MobileGo but LG PC suite and KDZ was not found my phone.
I try for DIAG, CS_Emergency and also when it on Emergency Mode (yellow screen)
All do nothin.
I Found anyone talking that v10k which can replace v20a
I'm running windows 7 64bit. Is that a problem with EN_KDZ?
Click to expand...
Click to collapse
About phone not being detected:
1. Be sure you have done all steps correctly(Correct Driver installation,especially model specific drivers if you can find // installed msxml.msi-if you haven't already, find it, install it and restart- // having windowsenabler.exe running and - On ) before starting the procedure.
2. You should also disable the LG modem driver.
3. I also propose doing the flashing in Emergency Download Mode and without the battery.
The above are mainly for the phone to be detected.
You said you had other problems too. What errors do you occur to? You have upgraded to v20b and cannot ... downgrade? V20b worked? Are you able to re-install it?

moulwxtos said:
About phone not being detected:
1. Be sure you have done all steps correctly(Correct Driver installation,especially model specific drivers if you can find // installed msxml.msi-if you haven't already, find it, install it and restart- // having windowsenabler.exe running and - On ) before starting the procedure.
2. You should also disable the LG modem driver.
3. I also propose doing the flashing in Emergency Download Mode and without the battery.
The above are mainly for the phone to be detected.
You said you had other problems too. What errors do you occur to? You have upgraded to v20b and cannot ... downgrade? V20b worked? Are you able to re-install it?
Click to expand...
Click to collapse
I've done the list on #1 and #3 but I didn't on #2.
Will try again today..
Hope I can make it!
Yeah..another issues is still on v20a, it also made a mess when updating to CM10 (latest update) NO RADIO SIGNAL (just like other said), and some game not working properly with stock v20a (Real Racing always force to close, smoother when i'm using v10f france+CM10).
The big point is My LG L7 with CM10 still smoother even it still not in alpha.

gefademe2d said:
I've done the list on #1 and #3 but I didn't on #2.
Will try again today..
Hope I can make it!
Yeah..another issues is still on v20a, it also made a mess when updating to CM10 (latest update) NO RADIO SIGNAL (just like other said), and some game not working properly with stock v20a (Real Racing always force to close, smoother when i'm using v10f france+CM10).
The big point is My LG L7 with CM10 still smoother even it still not in alpha.
Click to expand...
Click to collapse
I meant upgrading issues.
If your only issue is that your phone is not connected that's the easy part and you don't have to worry. There's no driver that cannot be found and correctly installed ....! :

moulwxtos said:
I meant upgrading issues.
If your only issue is that your phone is not connected that's the easy part and you don't have to worry. There's no driver that cannot be found and correctly installed ....! :
Click to expand...
Click to collapse
Me and You just solve it!!
Thanks maan..
You helping me from the first time and this far..
Well..the latest problem is on the KDZ.
The Rusian created that v20a for reason and just special v10k (Rusian and France people create this one) that can unlock v20a (i tho soo)
And I download this
Then instal it normaly..
Walla..stock came back.. CM10 on the go

gefademe2d said:
Me and You just solve it!!
Thanks maan..
You helping me from the first time and this far..
Well..the latest problem is on the KDZ.
The Rusian created that v20a for reason and just special v10k (Rusian and France people create this one) that can unlock v20a (i tho soo)
And I download this
Then instal it normaly..
Walla..stock came back.. CM10 on the go
Click to expand...
Click to collapse
That's good, glad I could help!
Cheers mate,
Moul.

HELP
i have the l7 p705g i had v10e_00 and i upgraded to v20a_00 now i lost my bootloader and i cant go to emergency mode please help me

[ROM] [LEAKED] [D855] [32Gb] V10E / V10F / V10G

From: http://www.androidiani.com/forum/mo...-test-info-sulle-rom-v-10e-f-g-per-il-g3.html
In this thread we will write our impressions of these pre-release of the new update to the D855 G3 32GB. invite you to post your reviews on the experience they had in the test rom.
10E links to download the version here(http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW382306432109876543213/D85510E_00.kdz)
links to download the 10F here (https://mega.co.nz/#!ZYpQRTQR!3fcUSplciB1Hf13HCj_1bj16Vg_Tib2vr9XMlTrUFFc)
links to download the 10G version here (https://docs.google.com/file/d/0B1SWc_D3QTEiLVdyeklVZWhoMkk/edit) Password: lgbbs
Guide to flash the ROM :
Download the latest drivers from Lg here
Download the new 2014 LG Flash tools from here
Connect the terminal to the PC via USB cable and wait for the installation of the drivers
Disconnect the terminal, spengetelo (wait a few seconds after Off) press volume up and reconnect the USB cable to start the download mode.
Launch Lg Flash tools (previously installed)
In the " Select type "will have to be CDMA , in " Phone mode "will be DIAG , in " Reset time "should be 33000
Open the KDZ file selection window and make sure the " Select KDZ file "there is the file you have downloaded ( 10F or 10G )
Without this we have two more options. Normal Flash and Flash CSE
Normal Flash: A method that leaves data intact on the phone. should be used only to correct errors of the system (not flash rom other than this)
CSE Flash: command erases all data: This option is preferred.
Choosing this option will open another window where you will select START
Without this, it will open another window where you will select only OK
Wait until the end of the process and DO NOT DISCONNECT UNTIL THE END ACCORDING TO RESTART or RESTART
If you are not really sure about this refer to http://forum.xda-developers.com/showthread.php?t=2797190
I just translated using Google Translator.
The original site is here(http://www.androidiani.com/forum/mo...-test-info-sulle-rom-v-10e-f-g-per-il-g3.html)

I'll try when I've get back home. Listening in, does all of them have the same changelogs plus national stuff or is there incremental changes between the different letters?

Hi, Many thanks for this, I have just about given up on receiving an OTA update for my unbranded UK 32GB D855.
Just few questions from a LG Noob.
Which version do you recommend I apply?
If it all goes wrong, Can I still factory reset?
Is it possible to apply root to 10f or 10g What is recommended?
Thanks Again.

gsw5700 said:
Hi, Many thanks for this, I have just about given up on receiving an OTA update for my unbranded UK 32GB D855.
Just few questions from a LG Noob.
Which version do you recommend I apply?
If it all goes wrong, Can I still factory reset?
Is it possible to apply root to 10f or 10g What is recommended?
Thanks Again.
Click to expand...
Click to collapse
I flashed v10e no problems, definite improvement with the laggy default launcher app drawer, feels like an improvement in battery life also, but can't be too certain as it hasn't had many days to settle.
Just after flashing I noticed v10f and then v10g arrive, so haven't tested those.
I rooted v10e with towelroot, but I heard towelroot and ioroot don't work on v10g, however I saw some people saying they rooted v10g with purpledrake. I don't know anything about v10f though.
Don't really know much else about the improvements or additions on all of these versions, but there should be some after all that's why they release later versions to improve, add and to iron out bugs.
Sent from my LG-D855 using Tapatalk

[Q] Possible epic brick...read inside for details!

So, I fudged up here. I installed a BUMPed KK bootloader thinking my kernel and recovery were BUMPed. Was using Render Kernel, turns out the Lollipop version is BUMPed, not KK. Good job, me! Got secure boot error loop and I still had TWRP, so I flashed the JB baseband. No boot. Tried to restore a backup I had (Mahdi + Render). No boot. Well, might as well use LG Flash Tools to go back to stock. Like I haven't done it 80 times before....Failed! Failed! Failed! . . . Failed! (I can't remember how many times I've tried).
I've tried every which way and LG Flash Tool gives me this:
PID: NULL
IMEI: NULL
Model :
DLL : D800
BIN : LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot
SWV :
SWOV :
Model Information Check FAIL!
00000000
So, am I royally screwed?

So you're stuck with black screen/frozen LG logo?
This guide should help.

I did try that guide, and couldn't get my phone to show up in any distro I tried (Ubuntu, Puppy, something else? I think?). I'm going the buy a working one, sell the borked one on eBay route. Oh well, can't win em all.

Moppusan said:
I did try that guide, and couldn't get my phone to show up in any distro I tried (Ubuntu, Puppy, something else? I think?). I'm going the buy a working one, sell the borked one on eBay route. Oh well, can't win em all.
Click to expand...
Click to collapse
Hello im from mexico, yesterday i almost epic brick my one day new LG G2 (AT&T D800) but there is a metod who works (sorry for the bad english)
1.- Download this file search in google ---- > LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot (3.15 gb)
2.- Download the DLL ----------> LGD800_20130904_LGFLASHv160.dll (1389Kb)
3.- Download LGFlashTool
4.- Download LG Drivers
5.- Turn off your phone, then plug the cable from the computer to your phone but first press the "VOLUME UP" button
6.- You'll be now in download mode in your phone.
7.- Go to device manager (change the com of your phone to 41) this is very important
8.- Start LGFlashTool, place the .dll and .tot file then press ok
9.- Press the icon "PLAY"
10.- Wait until the bar progrees is 100%, then just press the red botton.
You will have Jelly Bean but this method just work perfect, maybe you can check this vide too
watch?v=BZVKQ5SZyUk&index=1&list=FLab1_SjFokmDNCNBt2DVPVw

Thanks for the information. The link for the video doesn't work or is incomplete. Can you repost the video link?
soyskyler said:
Hello im from mexico, yesterday i almost epic brick my one day new LG G2 (AT&T D800) but there is a metod who works (sorry for the bad english)
1.- Download this file search in google ---- > LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot (3.15 gb)
2.- Download the DLL ----------> LGD800_20130904_LGFLASHv160.dll (1389Kb)
3.- Download LGFlashTool
4.- Download LG Drivers
5.- Turn off your phone, then plug the cable from the computer to your phone but first press the "VOLUME UP" button
6.- You'll be now in download mode in your phone.
7.- Go to device manager (change the com of your phone to 41) this is very important
8.- Start LGFlashTool, place the .dll and .tot file then press ok
9.- Press the icon "PLAY"
10.- Wait until the bar progrees is 100%, then just press the red botton.
You will have Jelly Bean but this method just work perfect, maybe you can check this vide too
watch?v=BZVKQ5SZyUk&index=1&list=FLab1_SjFokmDNCNBt2DVPVw
Click to expand...
Click to collapse

Moppusan said:
I did try that guide, and couldn't get my phone to show up in any distro I tried (Ubuntu, Puppy, something else? I think?). I'm going the buy a working one, sell the borked one on eBay route. Oh well, can't win em all.
Click to expand...
Click to collapse
It says model information check failed.
Did you maybe flashed another rom before or what because the LG Flash tool first checks as a safety measure or your phone is really D800, but you might have a mod or yeah I don't know what you all did but your phone Might is now D803 or some other number I don't know. But what you can do is edit the Dll with some hexeditor as far as I remember to D801, D803 etc Till flashing works.
So just edit the D800 DLL to think that it must check for another device model number which your rom has which you used last? And you should be fine with your issue and you can continue flash it to stock normally. I hope it's not too late for you yet cause it will spare you some bucks.
http://forum.xda-developers.com/showpost.php?p=56961336&postcount=251
Or just try to find the good dll file, or a DLL file without checking phone model is maybe the best. I hope you can still fix your problem. Goodluck mate,
-Wulsic

wulsic said:
It says model information check failed.
Did you maybe flashed another rom before or what because the LG Flash tool first checks as a safety measure or your phone is really D800, but you might have a mod or yeah I don't know what you all did but your phone Might is now D803 or some other number I don't know. But what you can do is edit the Dll with some hexeditor as far as I remember to D801, D803 etc Till flashing works.
So just edit the D800 DLL to think that it must check for another device model number which your rom has which you used last? And you should be fine with your issue and you can continue flash it to stock normally. I hope it's not too late for you yet cause it will spare you some bucks.
http://forum.xda-developers.com/showpost.php?p=56961336&postcount=251
Or just try to find the good dll file, or a DLL file without checking phone model is maybe the best. I hope you can still fix your problem. Goodluck mate,
-Wulsic
Click to expand...
Click to collapse
I LOVE YOU
I hex edited the DLL and TOT files. Turns out the TOT is what I needed to edit, not the DLL, as I could use the "universal" DLL. I started seeing the firmware being updated and said "O M G." My brain couldn't even comprehend it. :highfive:

Moppusan said:
I LOVE YOU
I hex edited the DLL and TOT files. Turns out the TOT is what I needed to edit, not the DLL, as I could use the "universal" DLL. I started seeing the firmware being updated and said "O M G." My brain couldn't even comprehend it. :highfive:
Click to expand...
Click to collapse
Nice to hear that you solved your issue, now have fun with your G2
Also nice to see your signature device change :good:

d802 loki tools needed?

Are the loki-tools needed (it's on github -- plz search, can't post outide links)!?
How do I apply/install them (on Ubuntu)!?
Thanks.

jeensg said:
Are the loki-tools needed (it's on github -- plz search, can't post outide links)!?
How do I apply/install them (on Ubuntu)!?
Thanks.
Click to expand...
Click to collapse
Loki tools are only needed on jb. For kk and above all you need is autorec/bump for recoveries, if that's what your asking.

Art Vanderlay said:
Loki tools are only needed on jb. For kk and above all you need is autorec/bump for recoveries, if that's what your asking.
Click to expand...
Click to collapse
Thx for answer. What are jb, kk and bump!? AutoRec I did use, tried recoveries (cm13) nd phone died. I try to figure out what went wrong (see other post "help with LG G2 D802 - no recovery working, download mode only"). Thanks!

jeensg said:
Thx for answer. What are jb, kk and bump!? AutoRec I did use, tried recoveries (cm13) nd phone died. I try to figure out what went wrong (see other post "help with LG G2 D802 - no recovery working, download mode only"). Thanks!
Click to expand...
Click to collapse
Alright I read your other thread. It still isn't clear where you went wrong. The twrp version that comes with autorec is outdated though and you should flash one of blastigator's builds before flashing any lollipop roms.
As your an ubuntu user you can use the lg flash tool on a windows vm. I've done it before and it works fine. It's pretty easy to set up just use vmware and then follow that back to stock guide.
Btw: jb = jellybean, kk = kitkat and so on.

Art Vanderlay said:
Alright I read your other thread. It still isn't clear where you went wrong. The twrp version that comes with autorec is outdated though and you should flash one of blastigator's builds before flashing any lollipop roms.
As your an ubuntu user you can use the lg flash tool on a windows vm. I've done it before and it works fine. It's pretty easy to set up just use vmware and then follow that back to stock guide.
Click to expand...
Click to collapse
Hey, thanks for answer. I tried the LG-Flash-Tool with virtualbox on Win7. It recognized the phone, tool started but aborted with an error I used 2 different kdz-files (one from hier with IMEI: "lg-firmware-rom.com", one from storage-cow: LG G2 Stock Firmware (Go Back to Stock) from xda/hyelton -- D80230f_00 and D80220B) which gave both same error (not specified in the tool) aborting after 2% (also didn't find server due to restrictions from my side, but shouldn't bother, right!?).
Wanted also to try TOT-method, but don't know where to get corresponding TOT-file, any hints!?
What means "bump" and what is blastigators build?
Other advice appreciated! Is it ok or better to post in the other thread!? (LG G2 Stock Firmware (Go Back to Stock))

jeensg said:
Hey, thanks for answer. I tried the LG-Flash-Tool with virtualbox on Win7. It recognized the phone, tool started but aborted with an error I used 2 different kdz-files (one from hier with IMEI: "lg-firmware-rom.com", one from storage-cow: LG G2 Stock Firmware (Go Back to Stock) from xda/hyelton -- D80230f_00 and D80220B) which gave both same error (not specified in the tool) aborting after 2% (also didn't find server due to restrictions from my side, but shouldn't bother, right!?).
Wanted also to try TOT-method, but don't know where to get corresponding TOT-file, any hints!?
Other advice appreciated! Is it ok or better to post in the other thread!? (LG G2 Stock Firmware (Go Back to Stock))
Click to expand...
Click to collapse
Take a look at this thread then. Also check device manager and make sure it's on com41, try different usb ports etc.

Art Vanderlay said:
Take a look at this thread then. Also check device manager and make sure it's on com41, try different usb ports etc.
Click to expand...
Click to collapse
Thanks for your time!
Unfortunately thi post doesn't help, since I can't boot into recovery. Right now I tried some more things:
* different usb-ports -- no change (maybe it's because of usb3, but in VM only usb2 is enabled)
* different kdz-files: german kk D80220B
* tried to put the kdz-files into flash-plugin-folder (which for me seems senseless )
* tried diffenrent drivers -- now version LGMobileDriver_WHQL_Ver_4.0.4
--> result ... now it's flashing till 3%! but still giving error ... shall I put log-file for further things!?
What calls my attention in log-File is this:
Code:
22:52:13 : Verifying phone connection...
22:52:13 : dwWaitResetTime(40000 ms)
22:52:14 : _IsConnectedPhone Call
22:52:23 : _IsConnectedPhone(2)
22:52:23 : 0 - NotConnected.
22:52:23 : 1 - Normal connect success
22:52:23 : 2 - Emergency connect success
22:52:23 : Phone Mode(2)

jeensg said:
Thanks for your time!
Unfortunately thi post doesn't help, since I can't boot into recovery. Right now I tried some more things:
* different usb-ports -- no change (maybe it's because of usb3, but in VM only usb2 is enabled)
* different kdz-files: german kk D80220B
* tried to put the kdz-files into flash-plugin-folder (which for me seems senseless )
* tried diffenrent drivers -- now version LGMobileDriver_WHQL_Ver_4.0.4
--> result ... now it's flashing till 3%! but still giving error ... shall I put log-file for further things!?
What calls my attention in log-File is this:
Code:
22:52:13 : Verifying phone connection...
22:52:13 : dwWaitResetTime(40000 ms)
22:52:14 : _IsConnectedPhone Call
22:52:23 : _IsConnectedPhone(2)
22:52:23 : 0 - NotConnected.
22:52:23 : 1 - Normal connect success
22:52:23 : 2 - Emergency connect success
22:52:23 : Phone Mode(2)
Click to expand...
Click to collapse
Hey, got it solved. My conclusion:
- virtual machine on Ubuntu doesn't work -- can't communicate with device -- windows machine worked
- usb3 doesn't work, use usb2-ports
- how to get into recovery-mode wasn't clear for me: https://www.youtube.com/watch?v=jPUTImVEHqc (push Volume DOWN + Power -- when LG appears, leave them for 1-2 seconds -- then press them again)
- CM13 NIGHTLY doesn't work with LG D802 (also tried flashing blastagators build since AutoRec works (with KK) but is outdated)
Now do have a CM12 on my LG and everything works fine...

Yoga Tab 2 1050F - Need help to downgrade to KitKat

Hi everybody,
[First of all I'm french, so sorry for my bad english...]
For the past 3 hours I've tried to downgrade my tablet from Android 5 to Android 4.
I've followed the instructions, but I'm "stuck" while I'm flashing with Flash Tool lite (v. 5.4.2.0), my tablet reboot on the desktop during the process.
What I've done so far ?
I've installed :
- PhoneFlashTool_4.4.4.1_external_win32.exe
- iSocUSB-Driver-Setup-1.2.0.exe
- IntelAndroidDrvSetup1.5.0.exe
Then, I understood that before to go back to KitKat, I needed to change the bios (return to kitkat bios). I used : restore-kitkat-bios-830-1050-v2
The procedure gone well (I think).
After that, I ran PhoneFlashTool_4.4.4.1, and I've ticked "force sparcing" to change size to 500mb, but when I've connected my tablet in USB Port (while it's on the droidboot screen), it didn't recognize my device...
So I've installed PlatformFlashToolLite_5.4.2.0_win32, instead.
With this version of the program my tablet is recognized, the flash started, but during the procedure my tablet reboot to the desktop, and after few minutes the connection is lost, and I've got an error message "flash failed".
I've tried to flash with debug usb tick, and not tick, same issue.
Few more info :
My tablet isn't rooted.
My computer is on Windows 7 64 bits Home Premium.
I don't really know what to do.
Is there something I did wrong ?

You need the kitkat rom to flash after you flash the bios
In the rom zip will be a flash.xml you select in phoneflashtool to flash the tab
Sent from my SM-G930F using Tapatalk

Thanks for your response pug1 !
I forgot to mention in my thread that yes, I click "browse" and select flash.xml from the "target_bin" folder.
Here's what I got in Flash tool Lite's box :
03/28/16 11:26:19.699 INFO : Flash file C:\Users\Daemon_Feunoyr\Downloads\Android\Yoga Tab 2\kitkat-YT2-1050F_S0198_150422_ROW\target_bin\flash.xml [Default] loaded
03/28/16 11:26:29.502 INFO : [Port 0/1/4] Start flashing the flash configuration with dnx_os start state for Baytrail1xxxxxxx
03/28/16 11:26:29.502 INFO : [Port 0/1/4] Reboot device Baytrail1xxxxxxx with Fastboot...
03/28/16 11:26:29.611 INFO : [Port 0/1/4] Starting flash ...
03/28/16 11:29:30.640 INFO : [Port 0/1/4] Device lost on 0/1/4
Click to expand...
Click to collapse

Go to http://forum.xda-developers.com/thi...-lenovo-yoga-tab-2-1050f-softbricked-t3319124 post 7 and there is all the files you need

Thanks, but I already have these archives :
- restore-kitkat-bios-830-1050-v2 (restore-kitkat-bios-830-1050-v2.exe)
- yogatablet2-flash-tools-20150812 (IntelAndroidDrvSetup1.9.0, iSocUSB-Driver-Setup-1.2.0, PhoneFlashTool_4.4.4.1_external_win32)
- kitkat-YT2-1050F_S0198_150422_ROW (target_bin (file), tools file (with the programs to flash...)
Isn't it enough ?
Do you think I need one of the file you posted on the other thread ? (I ask, because I have a very bad internet connection...)

I think I found what I did wrong.
I pressed volume up & power to go to the droidboot screen, instead of volume up and down + power (fastboot).
I succeed to flash KK with the tab in fastboot :victory:
Thanks for your time !
Now I need to look into how to root the tab.

To unlock the bootloader go here http://forum.xda-developers.com/thi...yoga-2-how-to-unlock-bootloader-t3320327,post 4

Does it means that I need to unlock the boatloader to root the tab ?

Yes, unlock the bootloader then use this. http://tinyurl.com/zoapeyh for permanent TWRP
Do not forget to update to lollipop BEFORE doing the boot unlock and TWRP

OK, thanks. I hope it's "easier" than downgrade :s
Can you do me a favor ? ^^"
I read your post on the other thread, and I'm confused... I don't really know what I should type in cmd.
Can you highlight (quotation marks, or put them in bold) the commands that I need to type, please ?
Open a CMD window on your computer and type cd c:\ to get to just a c prompt.
Then type fastboot flash ESP This bit then should read the full location of the unzipped file that is patched.
An example like mine is fastboot flash ESP c:/adb/1050f-esp-patched.img , this is how I did mine and I have an unlocked bootloader and permanent TWRP
Click to expand...
Click to collapse

Daemon_Feunoyr said:
OK, thanks. I hope it's "easier" than downgrade :s
Can you do me a favor ? ^^"
I read your post on the other thread, and I'm confused... I don't really know what I should type in cmd.
Can you highlight (quotation marks, or put them in bold) the commands that I need to type, please ?
Click to expand...
Click to collapse
Do the upgrade to lollipop first then come back here for the rest of the instructions.
After you do the upgrade and unlock the bootloader ,have a read here. http://forum.xda-developers.com/android/development/recovery-t3322990, it might be easier,the post is by surdu_petru.

I don't want to go back to Lollipop, there are too much bugs :/ (wifi, the screen flicker on internet browsers, sometimes the tablet reboot for no reason, etc.).
I had enough of Lollipop...
Anyway, I want to stay on KK.

Daemon_Feunoyr said:
I don't want to go back to Lollipop, there are too much bugs :/ (wifi, the screen flicker on internet browsers, sometimes the tablet reboot for no reason, etc.).
I had enough of Lollipop...
Anyway, I want to stay on KK.
Click to expand...
Click to collapse
O.K, like you I had many problems with lollipop but after doing all this plus one or two other mods,my 1050 is very fast and stable,BUT it might not be the same for others.

Maybe one day, when I'll be motivate lol I'm "exhausted" by my 4 hours of struggle with the downgrade XD
(I suppose there are lots of manip to do for lollipop to be stable =_=), and/or when Lenovo will release a stable version of Lollipop.
How do I root from KK ?
In tried with Kingo Root, but it stucks à 10 % for maybe ~ 10 minutes.
EDIT : Can I use this method ? (though I'm not sure I understand everything... x_x)

Daemon_Feunoyr said:
Maybe one day, when I'll be motivate lol I'm "exhausted" by my 4 hours of struggle with the downgrade XD
(I suppose there are lots of manip to do for lollipop to be stable =_=), and/or when Lenovo will release a stable version of Lollipop.
How do I root from KK ?
In tried with Kingo Root, but it stucks à 10 % for maybe ~ 10 minutes.
EDIT : Can I use this method ? (though I'm not sure I understand everything... x_x)
Click to expand...
Click to collapse
I am not sure but I don't think you can on Kitkat

No root at all on KK ?
Edit : My tab flickers in games -_-"
I might reconsider my decision to not upgrade to Lollipop... o/
Where can I find the rom without the two last updates ? (december and march... problems appeared with these 2 patchs...)
Edit 2 : Is that one of the 2 files you uploaded ?
If so, which one do I have to DL ?
YT2-1050F_USR_S000198_1504220313_WW21_ROW (1).zip
YT2-1050F_USR_S100031_1506111400_WW52_ROW-(L).zip

S100031. You will then have 3 update to get to S100256. I have zero problems on latest update
Sent from my SM-G930F using Tapatalk

Just remember if you upgrade and then root,you will not be able to take any more updates.
But saying all that, it's easy to get back to KitKat and start all over again.

OK, thanx both of you. :good:
I'll download YT2-1050F_USR_S100031_1506111400_WW52_ROW-(L).zip.
It's the same procedure with PhoneFlashTool/FlashToolLite ? :
- Vol up & down + Power (Fastboot mode)
- connect the tablet to the computer
- In PhoneFlashTool click browse and select flash.xml from the "target_bin" folder
- start to flash ?
For the Lollipop updates (not sure I want to (re)install them), if I wait a little bit before root my device, I guess it will show via OTA, no ?

Daemon_Feunoyr said:
OK, thanx both of you. :good:
I'll download YT2-1050F_USR_S100031_1506111400_WW52_ROW-(L).zip.
It's the same procedure with PhoneFlashTool/FlashToolLite ? :
- Vol up & down + Power (Fastboot mode)
- connect the tablet to the computer
- In PhoneFlashTool click browse and select flash.xml from the "target_bin" folder
- start to flash ?
For the Lollipop updates (not sure I want to (re)install them), if I wait a little bit before root my device, I guess it will show via OTA, no ?
Click to expand...
Click to collapse
Just do an ota of the first update to lollipop and then refuse the rest.