Database Users

[q] lg e400 kdz help

Recently I rooted my LG E400
Installed XtreMIUI V3 ROM
I forgot to backup my stock rom.
So i found that the only way is KDZ FLASHER
I saw a lot of posts but in the comments people were complaining about their phone got bricked etc.
Can you send me a full guide on how to flash with KDZ FLASHER my LG E400??

same method as unbricking it;
http://krazeefly.blogspot.com/2012/09/how-to-unbrick-your-android-phone.html
just leave your phone on home screen position with usb debug...
good luck

Links are not working
The kdz firmware links are not working

have you ever try to use your search engine???

I will try it
yayakuya said:
have you ever try to use your search engine???
Click to expand...
Click to collapse
Anyway links are fixed
I will try it and tell you
thanks for the reply

drivers problem?
Kdz flasher can not see my phone
It does not detect it ? any help??
Current rom : cm9
LG E400

reinstall the driver, install msxml.msi before open kdz.exe... turn off any modems drivers.

[Q] LG optimus L7 P 705 Stuck in emergency mode after flashing with KDZ

Yesterday, i try something with my phone
first my phone in FW V20a taiwan + root, next i want to flash it with FW V20a CIS +root+ CWM + deodex
after that KDZ has an error
here's a picture​
Now i stuck in emergency mode!!. i have waiting for it. and still nothing.
I've tried to flash it again. and still stuck in emergency mode.
Can someone fix this problem?
or i must go to LG SERVICE CENTER?
sorry for my bad English​

thanks before :cyclops:

I had this problem before, where my phone was stuck in emergency mode. I flashed it by following the instructions in this zip I found on a french android forum. www4. zippyshare .com/v/61483915/file. html (remove spaces)

d3rpmcherp said:
I had this problem before, where my phone was stuck in emergency mode. I flashed it by following the instructions in this zip I found on a french android forum. www4. zippyshare .com/v/61483915/file. html (remove spaces)
Click to expand...
Click to collapse
hmhmm ok ok , i'll try it
thanks :good:

d3rpmcherp said:
I had this problem before, where my phone was stuck in emergency mode. I flashed it by following the instructions in this zip I found on a french android forum. www4. zippyshare .com/v/61483915/file. html (remove spaces)
Click to expand...
Click to collapse
i still confused in tutorial
that caled "7. Clear Phone Software update registry, Select "Different Country" and select your Language. Click <OK>" ?
where must i click?

pembukaan said:
i still confused in tutorial
that caled "7. Clear Phone Software update registry, Select "Different Country" and select your Language. Click <OK>" ?
where must i click?
Click to expand...
Click to collapse
i.imgur .com/ICSWOEB.png (remove space)
If you don't see this screen click this icon so it's on
i.imgur .com/YXXtsXN.png (remove space)

d3rpmcherp said:
i.imgur .com/ICSWOEB.png (remove space)
If you don't see this screen click this icon so it's on
i.imgur .com/YXXtsXN.png (remove space)
Click to expand...
Click to collapse
okay i'll try it

same problem here, tried to flash the newest stock rom on my gf's l7 p700 fail and now im stuck on the emergency mode.. hope it helps :crying:

Soundwavex3 said:
same problem here, tried to flash the newest stock rom on my gf's l7 p700 fail and now im stuck on the emergency mode.. hope it helps :crying:
Click to expand...
Click to collapse
Only solution for me was to flash using LG Emergency Recovery

The offical LG update tool saved my life, it restored it
Xperia Arc S [lt18i]
ROM: latest FXP CM10
Kernel: Fusion Kernel 5.1
-
SIO | Smartassv2 | 0.2 - 1.6 gh

Thank you!
Thank you so much! My phone works again after a week of trying a lot of things

I was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised by my PC. Please Help.

pembukaan said:
okay i'll try it
Click to expand...
Click to collapse
Yeah so I had the same issue and tried this method, but i am not sure I got the right LG update software. Where do i download it from?
Also, when im running this, despite me running the little server the LG update thingy still connects to the internet and downloads a kdz, which fails to be installed on the phone.
I am trying this on a vista computer, will try on XP to see if results change.

My problem solved
before flashing use should care about alternate program running instead of KDZ upgrade tool, also need P705 dll files
i also stucked in Emergency mode i check Device Manager\Modem disable it and put P705 dll files and work nice
i also tell that we want better stable program instead of LG KDZ upgrade tool
pembukaan said:
Yesterday, i try something with my phone
first my phone in FW V20a taiwan + root, next i want to flash it with FW V20a CIS +root+ CWM + deodex
after that KDZ has an error
here's a picture​
Now i stuck in emergency mode!!. i have waiting for it. and still nothing.
I've tried to flash it again. and still stuck in emergency mode.
Can someone fix this problem?
or i must go to LG SERVICE CENTER?
sorry for my bad English​
Click to expand...
Click to collapse
---------- Post added at 03:22 PM ---------- Previous post was at 03:06 PM ----------
that's great worked fine what i do, i don't know but it works fine
QUOTE=Nickyyoh;41893490]Thank you so much! My phone works again after a week of trying a lot of things [/QUOTE]

rebirth
For those that can't get the kdz thing to work, here's a link to the procedure that saved my LG-P700 from the emergency mode locking :victory:
androidforums. com/eve-all-things-root/81055-stuck-in-emergency-mode-cant-use-lg-support-tool. html
Hope it helps someone

LG E615 | Cross Firmware Flashing/Downgrading | Error 1002 | 4% Update Fail FIX

This post may be helpful for:​
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater, ​
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
Go to post 2 for the solution​
Hello guys.
As the title says, I have tried to test JB(e610 model) Firmware to my LGE 615 with KDZ Updater.
The funny part is that I tried Europe v20B, which is supported for e610 and it (SEEMED) to be installed correctly. It wasn't obviously, that's why I'm here..! I had the usual " no touch " issue. The touch works ONLY after the first KDZ install, and after Hard Factory Reset for only ONE boot(and with SIM inside - If it's not it doesnt work). With the first reboot, the touch stops working.
Hence, I decided to downgrade it again to the previous version. So, I downloaded the correct firmware from LG site.
The issue is that NO other version other than v20B(Europe) for LG e610 is installed (no matter how many Roms compatible with e615 i tried).
I tried recovery from The LG Mobile Support Tool auto-update,KDZ Updater and offline installing it (Unbrick). The first 2 options give me this specific error:
Smart : wParam = 100, lParam = 1002
Step : Upgrade Error error code = 1002
Click to expand...
Click to collapse
The latter, gives me error in Connection with the phone(which I think is a bug)
The wierd thing is that v20B Europe flashing works. It seems i cannot "downgrade" it to an other version.
I thought "maybe it's because I tried e610 firmware" so I downloaded and tried older e610 firmwares but still nothing works. ONLY v20B-e610.
Of course I tried everything with disabled the LGE Usb Modem driver and with usb-debugging on.
Any suggestions?
Thanks in advance,
Moul.
EDIT: I've searched every possible solution online(Currently I'm trying to figure if LG Flashtool can do anything. Found the LG_E615.dll, but currently it says it cannot find the libusb0.dll....
Can anyone help? Maybe a link/guide for Flashtool?
EDIT 2: Ok, now I'm totally frustrated(and SCARED)... Stayed up all night and found NO solution. Tried LGMDP too, but cannot find a workaround...I tried either in Emergency Download Mode or in JB with no solution.... Is there any device compatible with e615 that i can use from LGMDP's devices??? KDZ still gives me the "1002" Error(Except of V20 Firmware).........
Am I at the wrong forum btw?*
If anyone knows any solution or has any abso-freaking-lutely ideas what I can do(Because I mine have ended).... PLEASE HELP!! :crying:
Please help..!!!!
Click to expand...
Click to collapse

KDZ Updater - Error 1002
Finally fixed it!!!
I installed downgraded CrossModel Firmware, and now my E615 has a E615 Official Rom.
As I said on the first post, there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for E610 - Europe) , so I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/ProgramData folder.(In Windows XP it's in C:\Documents and Settings\<your account name>\Application Data\)
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) I did the following steps:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extracted the -working-E610/V20.kdz and the E615/ V10.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and renamed the extracted E615v10.dz same as E610v20.dz.
5. I started the KDZ update, choosing the working V20, and when the e610v20.dz file was extracted, I replaced it immediately with the (now renamed as "e610v20.dz") E6150v10.dz.
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace then it then.
Wierd issue from LG, but it worked for me!
Cheers.

Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f

MeGaViC said:
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
Click to expand...
Click to collapse
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers

I was thinking "I won´t be able to try other roms anymore" but with your solution, I WILL!!!, hehehe...
35 hours awake?... problems like this takes sleep away...
Thank you again sir...
Regards..

man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?

hassan216 said:
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
Click to expand...
Click to collapse
You upgraded via KDZ Updater? Or by the in-phone updater?
If you upgraded via KDZ, you follow the same steps as the second post. The .dz files that you will need to replace are in the c://appdata/lgmobileax folder (on Windows 7 and with "show hidden files and folders" option ON).
If you didn't update via the LG KDZ tool , you just have to find a working (one that can get installed) firmware from HERE. I think it's better to download a Jelly Bean(V20) one, since you wont have problem installing it propably.
Try, the things above, follow the steps on second post carefully and tell me what happened.
Cheers,
Moul.

i have updated through kdz and i do the same steps as i updated but it gives me errors ..i will try the way you mentioned in post two ...its too complicated when i read it i didnt understand anything but i will try and tell you if i need assistance ..thank you mate

I can confirm that it works on lg l5 e610.
I succesfully flashed from v20c to v10l.

Brilliant!!
This worked for me!!
I tot my Ph was almost Bricked.. was searching for a solution but did not get it anywhere...
Finally this fixed the issue..
Thanks Mate..
Thanks a million..

Thx a lot! Worked like a charm! :good:

i flash e612 with rom of P705, now the phone bricked. want to flash back. try to use this mothod, need to replace the "dll" file too?

i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.

moulwxtos said:
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
Click to expand...
Click to collapse
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here

quiorra25 said:
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
Click to expand...
Click to collapse
Did you try the workarounds below?
moulwxtos said:
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace it then.
Click to expand...
Click to collapse
ilovelg4ever said:
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse

moulwxtos said:
Did you try the workarounds below?
Click to expand...
Click to collapse
Hey moulwxtos,
I managed to figure it out. The problem was with the version of KDZ updater I was using. For some reason I couldn't replace the renamed .dz file when using the original KDZ Updater because it kept giving me something about permission errors. When i changed to the KDZ Updater with offline fox (UpTestEX_mod2_marwin) it worked flawlessly. My phone's back to normal. Many thanks mate

ilovelg4ever said:
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
please some video how to replace the generated file of UpTestEX_mod2_marwin,
because i cant it say file in use or i cant cancel the generated, and even unplugin the cable, impossible

Right Now at 2017. We can fix the "Error 1002" or the update tool stops at 4%. of th
Right Now at 2017.
We can fix the "Error 1002" or the update tool stops at 4%. of the KDZ Update tool (I did with LG E615)
This way:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Download a firmware stock version V10x_00 compatibly with your Phone ( From lg-firmwares)
5. With LG Flash Tool 2004 do downgrade from V20 to version Base V10, you just have to choose the V10x_00.kdz
6. I started the KDZ update NORMALLY and just Wait.
maybe later you can install the version V20D

[Fixed]no IMEI,bad touchscreen after flashing D802 kdz.

I am not a dev or expert,I am just a regular guy who is suffering after buying franken D802.while trying to fix it,I have read a lot and saw that 70% users can't get there phone back.And TOT hex editing seems pretty hard to me as I could never pass previousload error.
So lets start from the beginning. I bought a D802,then I tried upgrading it by D802 kdz.now the phone has
1.No IMEI
2.bad touchscreen.
3.internal storage or MTP isn't shown on PC.
4.etc.
Now let's start.
1.open up the phone,see what's written in the motherboard.most of the time it's D800.
2.then get an OTG mouse and try to root it via apps like kingroot ,stumproot etc.because PC rooting method with IOroot doesn't work most of the time.
And don't worry if it shows error,keep trying.
Important:
*it's not possible sometimes to download apps via WiFi.I don't know why.if that happens,try installing them from a pendrive connecting via OTG HUB.
*If apps never gets installed,disable Verify Apps from settings>security
3.after rooting,change the model number and all D802 to your model(D800 in my case) via editing build.prop with any apps like es file explorer or build prop editor.
4.reboot device and see if software version,and model number changed.
5.flash D800 or your TOT or KDZ without any editing,from download mood.if your download mood shows secure boot error,use SRK tools to fix it,and SELECT D802,again SELECT D802 in SRK tools.
Because if you choose your model,like D800,your phone will go in fastboot mood.
Bingo!maybe your G2 is back! ✌?
Off topic:Took me 1.5 months to find a way to fix it! ?

I am stuck a fastboot mood after selecting D800 in SRK tools.
Fastboot devices aren't recognized and no QHSUSB_BULK .?
I am really afraid of tearing the phone up and shorten pins or something!

Jongla said:
I am stuck a fastboot mood after selecting D800 in SRK tools.
Fastboot devices aren't recognized and no QHSUSB_BULK .?
I am really afraid of tearing the phone up and shorten pins or something!
Click to expand...
Click to collapse
I don't think you have to shorten pins if you have fastboot!
What's your phone shown while connected to fastboot mood in PC?

Herny123 said:
I don't think you have to shorten pins if you have fastboot!
What's your phone shown while connected to fastboot mood in PC?
Click to expand...
Click to collapse
It's simply shown as "Android".

Jongla said:
It's simply shown as "Android".
Click to expand...
Click to collapse
Oh I had the exact same problem! ?
Uninstall all drivers,then installed updated LG drivers.and then install PDAnet.
Look at device manager.It should show your device as ADB interface or something and your phone should have a new line "fastboot processing commands"....

Herny123 said:
Oh I had the exact same problem! ?
Uninstall all drivers,then installed updated LG drivers.and then install PDAnet.
Look at device manager.It should show your device as ADB interface or something and your phone should have a new line "fastboot processing commands"....
Click to expand...
Click to collapse
Oh I don't know how to thank you!
Pdanet drivers did my work exactly as you say!! ?
Now what img should I flash?
D802 or D800?

Of course D802 as it thinks its a D802.
Then flash KDZ,then after booting up try doing as op..
Best of luck .. ?

You are a life saver!
Worked perfectly without any haste.
Thanks alot

Where do I will get D802 and D800 Rom kdz and what about flashing kernel
Where do I will get D802 and D800 Rom kdz and what about flashing kernel

go to'go back to stock' thread,you will find all kdz and tot.
And this kdz and tot includes kernels.

My phone model is D802 32GB - Flash KDZ Update to 5.0.2
Now
1.No IMEI
2.bad touchscreen.
3.no Signal
4.32GB Change to 10GB!
DownloadBoot ok - Read Storage in PC ok
What should I do? Please
KDZ & Tot D802 ( 4.2.2 (10f) - 4.4.2 (20d-20g) - 5.0.2 (30a) ) Tested!
I have flash ROM D800 totfile? Or No ?
if "Yes" : please link to my Download
I tried every way I got tired

avat2064 said:
My phone model is D802 32GB - Flash KDZ Update to 5.0.2
Now
1.No IMEI
2.bad touchscreen.
3.no Signal
4.32GB Change to 10GB!
DownloadBoot ok - Read Storage in PC ok
What should I do? Please
KDZ & Tot D802 ( 4.2.2 (10f) - 4.4.2 (20d-20g) - 5.0.2 (30a) ) Tested!
I have flash ROM D800 totfile? Or No ?
if "Yes" : please link to my Download
I tried every way I got tired
Click to expand...
Click to collapse
Open up the motherboard and see what's written there.
But most probably you have D800.
And if that is the model,here you go for the Tot.
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/AT&T/
I flashed 10o version with the method above.

Herny123 said:
I am not a dev or expert,I am just a regular guy who is suffering after buying franken D802.while trying to fix it,I have read a lot and saw that 70% users can't get there phone back.And TOT hex editing seems pretty hard to me as I could never pass previousload error.
So lets start from the beginning. I bought a D802,then I tried upgrading it by D802 kdz.now the phone has
1.No IMEI
2.bad touchscreen.
3.internal storage or MTP isn't shown on PC.
4.etc.
Now let's start.
1.open up the phone,see what's written in the motherboard.most of the time it's D800.
2.then get an OTG mouse and try to root it via apps like kingroot ,stumproot etc.because PC rooting method with IOroot doesn't work most of the time.
And don't worry if it shows error,keep trying.
Important:
*it's not possible sometimes to download apps via WiFi.I don't know why.if that happens,try installing them from a pendrive connecting via OTG HUB.
*If apps never gets installed,disable Verify Apps from settings>security
3.after rooting,change the model number and all D802 to your model(D800 in my case) via editing build.prop with any apps like es file explorer or build prop editor.
4.reboot device and see if software version,and model number changed.
5.flash D800 or your TOT or KDZ without any editing,from download mood.if your download mood shows secure boot error,use SRK tools to fix it,and SELECT D802,again SELECT D802 in SRK tools.
Because if you choose your model,like D800,your phone will go in fastboot mood.
Bingo!maybe your G2 is back!
Off topic:Took me 1.5 months to find a way to fix it!
Click to expand...
Click to collapse
my touch is not working properply. so, how can i change model number any other solution?

what laf, recovery,boot and aboot img
what type of laf.img, boot.img and recovery.img i use for my lg g2.
when i open it i saw d800 AT&T near processor over a sink of processor.
so what type of file i flash to my device to get correct download mode.
the problem which happen's to me is this.
my device was on KITKAT when i try to update my device to lollypop using lg support tool (auto update using lg support tool to latest android version) after that i got no imei, no baseband and bad touch screen than i flash kdz file but same happend no imei,no baseband and badtouch.than i try to flash using TOT method and i wipe out everything.so know i try pin's touching method on which i get qhsusb mode and i am able to flash different img files.but i don't know which version of files i use..do you know than please help me specify the correct version that i flash and get download , recovery all at the same time than i will flash 10d or 10o ROM using TOT method.
but first i need to fix download mode (i don't know which img files i use).
thank you.

Try laf.img,boot.img of D802 if you used D802 as the model to update to lolipop.this will fix download mode.

Umar_khan said:
my touch is not working properply. so, how can i change model number any other solution?
Click to expand...
Click to collapse
The other solution is you have to edit the hex of D800 TOT file,which I could never succeed at.

HELP ME!
I have Lg g2 D80220b Kitkat 4.4.2, LgMobile Support Tools > Upgrade to D80230a Lollipop 5.0.2
now this my phone Touchscreen random clicked, Help me ALL
This phone NEW Phone
/Sorry, My English Language is BAD/

Hello,
My phone is a D800 in inside but i bought it as a D802 and after software update all those creepy things happened.... can you please briefly what i need to do to get it back?
Thanks
Zoheb

lg g2 brick issue
zakir_zoheb said:
Hello,
My phone is a D800 in inside but i bought it as a D802 and after software update all those creepy things happened.... can you please briefly what i need to do to get it back?
Thanks
Zoheb
Click to expand...
Click to collapse
have u solve ur issue bro.

kalpesh patil said:
have u solve ur issue bro.
Click to expand...
Click to collapse
No kalpesh.. i couldn't... looking forward for your help.

d802 loki tools needed?

Are the loki-tools needed (it's on github -- plz search, can't post outide links)!?
How do I apply/install them (on Ubuntu)!?
Thanks.

jeensg said:
Are the loki-tools needed (it's on github -- plz search, can't post outide links)!?
How do I apply/install them (on Ubuntu)!?
Thanks.
Click to expand...
Click to collapse
Loki tools are only needed on jb. For kk and above all you need is autorec/bump for recoveries, if that's what your asking.

Art Vanderlay said:
Loki tools are only needed on jb. For kk and above all you need is autorec/bump for recoveries, if that's what your asking.
Click to expand...
Click to collapse
Thx for answer. What are jb, kk and bump!? AutoRec I did use, tried recoveries (cm13) nd phone died. I try to figure out what went wrong (see other post "help with LG G2 D802 - no recovery working, download mode only"). Thanks!

jeensg said:
Thx for answer. What are jb, kk and bump!? AutoRec I did use, tried recoveries (cm13) nd phone died. I try to figure out what went wrong (see other post "help with LG G2 D802 - no recovery working, download mode only"). Thanks!
Click to expand...
Click to collapse
Alright I read your other thread. It still isn't clear where you went wrong. The twrp version that comes with autorec is outdated though and you should flash one of blastigator's builds before flashing any lollipop roms.
As your an ubuntu user you can use the lg flash tool on a windows vm. I've done it before and it works fine. It's pretty easy to set up just use vmware and then follow that back to stock guide.
Btw: jb = jellybean, kk = kitkat and so on.

Art Vanderlay said:
Alright I read your other thread. It still isn't clear where you went wrong. The twrp version that comes with autorec is outdated though and you should flash one of blastigator's builds before flashing any lollipop roms.
As your an ubuntu user you can use the lg flash tool on a windows vm. I've done it before and it works fine. It's pretty easy to set up just use vmware and then follow that back to stock guide.
Click to expand...
Click to collapse
Hey, thanks for answer. I tried the LG-Flash-Tool with virtualbox on Win7. It recognized the phone, tool started but aborted with an error I used 2 different kdz-files (one from hier with IMEI: "lg-firmware-rom.com", one from storage-cow: LG G2 Stock Firmware (Go Back to Stock) from xda/hyelton -- D80230f_00 and D80220B) which gave both same error (not specified in the tool) aborting after 2% (also didn't find server due to restrictions from my side, but shouldn't bother, right!?).
Wanted also to try TOT-method, but don't know where to get corresponding TOT-file, any hints!?
What means "bump" and what is blastigators build?
Other advice appreciated! Is it ok or better to post in the other thread!? (LG G2 Stock Firmware (Go Back to Stock))

jeensg said:
Hey, thanks for answer. I tried the LG-Flash-Tool with virtualbox on Win7. It recognized the phone, tool started but aborted with an error I used 2 different kdz-files (one from hier with IMEI: "lg-firmware-rom.com", one from storage-cow: LG G2 Stock Firmware (Go Back to Stock) from xda/hyelton -- D80230f_00 and D80220B) which gave both same error (not specified in the tool) aborting after 2% (also didn't find server due to restrictions from my side, but shouldn't bother, right!?).
Wanted also to try TOT-method, but don't know where to get corresponding TOT-file, any hints!?
Other advice appreciated! Is it ok or better to post in the other thread!? (LG G2 Stock Firmware (Go Back to Stock))
Click to expand...
Click to collapse
Take a look at this thread then. Also check device manager and make sure it's on com41, try different usb ports etc.

Art Vanderlay said:
Take a look at this thread then. Also check device manager and make sure it's on com41, try different usb ports etc.
Click to expand...
Click to collapse
Thanks for your time!
Unfortunately thi post doesn't help, since I can't boot into recovery. Right now I tried some more things:
* different usb-ports -- no change (maybe it's because of usb3, but in VM only usb2 is enabled)
* different kdz-files: german kk D80220B
* tried to put the kdz-files into flash-plugin-folder (which for me seems senseless )
* tried diffenrent drivers -- now version LGMobileDriver_WHQL_Ver_4.0.4
--> result ... now it's flashing till 3%! but still giving error ... shall I put log-file for further things!?
What calls my attention in log-File is this:
Code:
22:52:13 : Verifying phone connection...
22:52:13 : dwWaitResetTime(40000 ms)
22:52:14 : _IsConnectedPhone Call
22:52:23 : _IsConnectedPhone(2)
22:52:23 : 0 - NotConnected.
22:52:23 : 1 - Normal connect success
22:52:23 : 2 - Emergency connect success
22:52:23 : Phone Mode(2)

jeensg said:
Thanks for your time!
Unfortunately thi post doesn't help, since I can't boot into recovery. Right now I tried some more things:
* different usb-ports -- no change (maybe it's because of usb3, but in VM only usb2 is enabled)
* different kdz-files: german kk D80220B
* tried to put the kdz-files into flash-plugin-folder (which for me seems senseless )
* tried diffenrent drivers -- now version LGMobileDriver_WHQL_Ver_4.0.4
--> result ... now it's flashing till 3%! but still giving error ... shall I put log-file for further things!?
What calls my attention in log-File is this:
Code:
22:52:13 : Verifying phone connection...
22:52:13 : dwWaitResetTime(40000 ms)
22:52:14 : _IsConnectedPhone Call
22:52:23 : _IsConnectedPhone(2)
22:52:23 : 0 - NotConnected.
22:52:23 : 1 - Normal connect success
22:52:23 : 2 - Emergency connect success
22:52:23 : Phone Mode(2)
Click to expand...
Click to collapse
Hey, got it solved. My conclusion:
- virtual machine on Ubuntu doesn't work -- can't communicate with device -- windows machine worked
- usb3 doesn't work, use usb2-ports
- how to get into recovery-mode wasn't clear for me: https://www.youtube.com/watch?v=jPUTImVEHqc (push Volume DOWN + Power -- when LG appears, leave them for 1-2 seconds -- then press them again)
- CM13 NIGHTLY doesn't work with LG D802 (also tried flashing blastagators build since AutoRec works (with KK) but is outdated)
Now do have a CM12 on my LG and everything works fine...