please help
My Lenovo A30000 Won't Charge or Turn on
i am trying Power button + Volume up
may be i use it in wrong way.
Can any one Advice me.
Try push reset button (under back clover, right side of sim slot)
remon_ph said:
please help
My Lenovo A30000 Won't Charge or Turn on
i am trying Power button + Volume up
may be i use it in wrong way.
Can any one Advice me.
Click to expand...
Click to collapse
you need to flash the tablet by using this rom A3000_A422_011_022_140127_WW_CALL_FUSE this will remove any data on the tablet but it will solve this problem
Please help
Hi!
I downloaded this firmware A3000_A422_011_022_140127_WW_CALL_FUSE and following http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135/page83 instructions on that link i installed every driver and laptop i borrowed for doing this is offten laggy so i heared a couple of times plugin in and out sound and while i was watching driver errors even that they were installed successfuly i stoped the SP Flash Tool and didn't notice that yellow bar was about 2/5 full and after that like before that it only shows "Searching". Someone said for driver that was buggin me i need to hold volume + and while holding it plug USB in and i installed driver that way but tablet won't start anymore, i tried reset button on the back. That tablet is my only computer please help me, what i can do?... Tried restart laptop but after restart i got unknown device when i plug in the tablet. Please help me somehow and if i miss the thread please move it. I didn't know where to put it.
Sorry for my english and thank You very much!
P.S. This is my screenshot of software version while tablet was alive
iMessa said:
Hi!
I downloaded this firmware A3000_A422_011_022_140127_WW_CALL_FUSE and following http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135/page83 instructions on that link i installed every driver and laptop i borrowed for doing this is offten laggy so i heared a couple of times plugin in and out sound and while i was watching driver errors even that they were installed successfuly i stoped the SP Flash Tool and didn't notice that yellow bar was about 2/5 full and after that like before that it only shows "Searching". Someone said for driver that was buggin me i need to hold volume + and while holding it plug USB in and i installed driver that way but tablet won't start anymore, i tried reset button on the back. That tablet is my only computer please help me, what i can do?... Tried restart laptop but after restart i got unknown device when i plug in the tablet. Please help me somehow and if i miss the thread please move it. I didn't know where to put it.
Sorry for my english and thank You very much!
P.S. This is my screenshot of software version while tablet was alive
Click to expand...
Click to collapse
I decided to try it for the last time and on my luck driver was installed by it self after i plugged the tablet and it wasn't unknown device. I think the solution is reset button on the back of tablet. Thank you anyway !
tanx men you save mee((((((
nut27455 said:
Try push reset button (under back clover, right side of sim slot)
Click to expand...
Click to collapse
My a3000 doesn't turn on after I did this,It still only open The first animation of lenovo
What can I do pleasey
Update: Now I tried to wipe data factory from recovery mood, the tap stopped while erasing and every time I try to open it , it open into animation for android and typing Erasing then the tap restart to the same animation, Help me please
remon_ph said:
please help
My Lenovo A30000 Won't Charge or Turn on
i am trying Power button + Volume up
may be i use it in wrong way.
Can any one Advice me.
Click to expand...
Click to collapse
My a3000 doesn't turn on after I did this,It still only open The first animation of lenovo
What can I do pleasey
Now I tried to wipe data factory from recovery mood, the tap stopped while erasing and every time I try to open it , it open into animation for android and typing Erasing then the tap restart to the same animation,can you Help me please
Mahmad Salah said:
My a3000 doesn't turn on after I did this,It still only open The first animation of lenovo
What can I do pleasey
Now I tried to wipe data factory from recovery mood, the tap stopped while erasing and every time I try to open it , it open into animation for android and typing Erasing then the tap restart to the same animation,can you Help me please
Click to expand...
Click to collapse
You may flash the rom using SP flash
use this theard for more help
http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135
Related
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
manuel80 said:
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
Click to expand...
Click to collapse
Try flashing. Look at the link in my sig.
Its nothing big
The same happened to me. I then searched the net and found this wonderful site. I flashed the original rom, then got bolder and started flashing froyo roms and am now happily flashing custom roms ! I can say I enjoy my phone more now!!. Flash your phone too!!
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
manuel80 said:
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
Click to expand...
Click to collapse
You can try to factory reset it... Follow the following
Press Vol Up + Vol Down Key (Press in middle so that both are pressed)
Press Home Key
Now Press Power
GT I5801 logo will appear
Leave the keys and your phone will boot into recovery
Try wiping cache first and if not working factory reset it
If after this it doesnt work, Install Kies...It will install drivers
Follow the above steps except press vol down key instead of both
Phone will go into download mode.... Plug in USB and flash it
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Just flash your phone with new rom. For this use Odin and OPS file and rom .
Boot into download mode of gt-5800 by using vol - , power and home button all at a time. Then you can flash new firmware from Odin , use one package or other option specific to rom and your phone will start working again. Hope this helps.
Post any problem while flashing.
manuel80 said:
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Click to expand...
Click to collapse
Did the phone hung during upgrade process or Kies hung during download process?
If phone hung during upgrade process and now you cannot boot that means your phone is hard bricked. This is because when you upgrade the phone through kies, it updates the boot loader and when phone hung during the process means bootloader is corrupted. In this scenario, you need to take the phone to service center and get hardware replaced
then I guess I'll have to bring your cell phone service ... damn ..
Grazzi guys for the help anyway .. I just know you know the developments of the case ..
hello
have you ever tried anything like flashing before? if not take it to samsung service centre and say it is not switching on.
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
wahoby said:
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
Click to expand...
Click to collapse
litle bit same problem with me, my phone stuck on cyanogen 9 logo, but no bootmenu is showing.
wahoby said:
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
Click to expand...
Click to collapse
You post is too large(in terms of fonts) to read...it hurt my eyes!!
anyways, about the issue, I guess your phone's battery in not charged. Please make sure to charge the battery using the charger and once it done then boot your phone and when you see blue LED blinking press both volume keys together... this will make your phone to boot into boot menu....now do a data/cache wipe and reboot....
However, if this does not helps then you will be required to flash with the SBF. refer to Defy Developement section - http://forum.xda-developers.com/showthread.php?t=966537.
Hope this helps!!
Rajneeshgadge17 said:
You post is too large(in terms of fonts) to read...it hurt my eyes!!
anyways, about the issue, I guess your phone's battery in not charged. Please make sure to charge the battery using the charger and once it done then boot your phone and when you see blue LED blinking press both volume keys together... this will make your phone to boot into boot menu....now do a data/cache wipe and reboot....
However, if this does not helps then you will be required to flash with the SBF. refer to Defy Developement section - http://forum.xda-developers.com/showthread.php?t=966537.
Hope this helps!!
Click to expand...
Click to collapse
I was just about to say this myself! ^^. Perfect reply. Thread ended
CM7 + CM9 double boot
my friend the problem is that you cant make nandroid buckup of this rom
thank u all for the quick response..and i am sorry for the fonts
as for the problem,,the battery was fully charged and after the problem i left the phone on the charger for over 8 hrs...and for my friend who suggested to use the boot menu during the blue light..the problem is there is NO blue light or any light,,just as soon as i start the device it shows the Google logo and thats it..no light flashing..no options to do anything. if i can go to boot menu or the recovery menu then i can solve the problem..but i am unable to do anything..so i tried using RSDlite to install an SBF file..but the program isn't able to locate my device..
so right now my device isn't able to go into any boot menu ..nor the RSDlite is able to fix it !!!!
wahoby said:
thank u all for the quick response..and i am sorry for the fonts
as for the problem,,the battery was fully charged and after the problem i left the phone on the charger for over 8 hrs...and for my friend who suggested to use the boot menu during the blue light..the problem is there is NO blue light or any light,,just as soon as i start the device it shows the Google logo and thats it..no light flashing..no options to do anything. if i can go to boot menu or the recovery menu then i can solve the problem..but i am unable to do anything..so i tried using RSDlite to install an SBF file..but the program isn't able to locate my device..
so right now my device isn't able to go into any boot menu ..nor the RSDlite is able to fix it !!!!
Click to expand...
Click to collapse
I'm sure you are are able to boot into the boot loader.
Follow below mentioned steps:
To Flash full SBFs, here is the standard procedure:
1. Open RSD Lite: Click on [ … ] Button and select your .SBF (Remember to rename to a short name and put it on root of your PC) and click Open.
2. Boot your phone into Bootloader Mode (check last section if you don’t know how to do it).
3. Now connect your Defy to your PC
4. The START button on RSD Lite should be available now, click and wait.
Click to expand...
Click to collapse
Fore more info refer to the below mentioned link:
http://forum.xda-developers.com/showthread.php?t=1216982
Use any Froyo SBF or Fixed SBF.
Good Luck!!
---------- Post added at 05:00 AM ---------- Previous post was at 04:54 AM ----------
crakeron said:
I was just about to say this myself! ^^. Perfect reply. Thread ended
CM7 + CM9 double boot
Click to expand...
Click to collapse
Thanks for the compliment lol
my dear friend...i don't know what to say..ur really trying to help me and i want to thank u for all ur efforts..but the RSD isn't able to detect my phone..i have used it b4 and i know how it works..but when i connect the phone to the pc nothing happens..not even a voice notification that a device has been connected..therefore the RSD isn't able to start to fix the phone..i've tried holding the vol up + power but nothing..also both vol +power also nothing..just as soon as i connect the device to the pc or the charger it instantly shows the Google logo and thats it! nothing else happens
Same issue, can't use RSD if you can't first get to the bootloader. Read a thread about using a stripped USB cable to hotwire the battery to get power to flash with RSD, but can't figure out how to link in mobile app.
Sent from my beastly Galaxy S 2.
Here http://forum.xda-developers.com/showthread.php?t=892026
Sent from my beastly Galaxy S 2.
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
umm
Anyone??
Spudster1 said:
Anyone??
Click to expand...
Click to collapse
Perhaps you can go to ROM Manager, uninstall Recovery, then re-install it?
I don't really know. I'm sorta new to this stuff.
hard reset
Spudster1 said:
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
Click to expand...
Click to collapse
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
reply
kurtstraker said:
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
Click to expand...
Click to collapse
Ok I will try that and let you know if it works in a few hours I gave the phone to my brother for free since I bought A samsung (used to samsungs and love then
Anyway should also mention that when I try to reboot into recovery with rom manager it reboots goes to the loading box thing then it wipes my data Like i said I tried that method in a few hours and get back to you here.
nope
didn't work ;.(
Man go to the screen u have posted the images above , then use KDZ to flash back Man!
This is "DIAG MODE" so select it in KDZ program
So select KDZ file ( download if u have tried urs so far)
No error .. when u click to start upgrade ur phone will apper in emergency mode. Then the KDZ will flash flawslessly
Sent From ... Lg e400 <-- {[Brasilian Here]}
Still didnt work it flash though but still didnt fix the recovery..
These lg are actually useless a simple firmware flash should do the job.
LG staff are also rude to be honest rang up and because I tried to root and I was doing the right thing going back to stock they denied support and hang up without me giving A reply. Glad ive switched back to samsung s4 and Apple IPhone 5C.
Thanks for attempting to help :.)
i have that new rom after it every thing goes wrong and i donot have backup }} need help with that auto reboot
karim600 said:
i have that new rom after it every thing goes wrong and i donot have backup }} need help with that auto reboot
Click to expand...
Click to collapse
can you explain your problem...what is rom you are using??
having same problem
all the sudden while the tablet is working it reboots by itself
i decided to upgrade the firmware to a3000_a422_013_026_140926_ww_call_fuse after seeing it on my friend's tablet which he got it from the lenovo
the bad news this version is not available on the internet,so i had to go for an older version just to make sure that the tablet is not getting hacked
i got the flash tool ,new cable and connected the tablet while holding the volume down until i heard a device detected sound from my windows 7 then at this moment i released the volume down button.......the tablet was identified in device manager
something is wrong the tablet keeps connecting and disconnecting for no reason even on a different pc
i decided to upgrade and give it a try
it accepted the firmware without even hitting the rest button
i started the tablet from the power button then it started by showing the boot animation then bloop it turned off by itself
i went for this step 4 times : http://forum.xda-developers.com/lenovo-a3000/general/bricked-a3000-f-t2851065
it booted then turned off
i got nervous and tried again and hit the firmware/Upgrade button instead of the download button and strangely it accepted the firmware !!
tried to boot .......nothing!!!
now i am stuck !!
Help Please
hello
after a low battery emergency, my Max2 doesnt start completely anymore i can see beginning of startup but doesnt complete
and restart constantly till batterie down.
i can access on both recovery menu (Sound+ or Sound-) but i can't do anything from them
any help appreciated
thanks so much
F94
help please
help needed please !!!
thanks
F94
Try formatting data
You can try clean install of the ROM you preffer
how to ?
thanks for your reply
how can do that ?
frenchy94 said:
thanks for your reply
how can do that ?
Click to expand...
Click to collapse
Note: This will format (reset) your phone and you will loose all of your data
Go to TWRP Power and Vol+ button
then click on wipe
then click format data
Now type yes
Screen shot below
frenchy94 said:
hello
after a low battery emergency, my Max2 doesnt start completely anymore i can see beginning of startup but doesnt complete
and restart constantly till batterie down.
i can access on both recovery menu (Sound+ or Sound-) but i can't do anything from them
any help appreciated
thanks so much
F94
Click to expand...
Click to collapse
Hope you have recovered your phone....if not tell about:
1. What ROM were you on when such thing started happening - Stock or any custom ROM?
2. If on stock what recovery do you have - stock or TWRP?
3. If custom ROM which one? Did you try to install ROS 4 without suggested GApps? ROS 4 loops without GApps install as of now.
4. Do you have access to a PC?
You can also try via Telegram channel for "Le Max 2 Development" for quick help.
still dead...
still stuck
i can' access on both menu (pressing either + or -)
but stuck after , i assume stock ROM
i have an PC on my hands
thanks for your helo
frenchy94 said:
still stuck
i can' access on both menu (pressing either + or -)
but stuck after , i assume stock ROM
i have an PC on my hands
thanks for your helo
Click to expand...
Click to collapse
Sorry to hear that. Boot to recovery, copy all your data to PC. It would help if you can post a screenshot of recovery.
Recovery with vol up and power buttons.
Edit: Once done with backup post the recovery screen here. Someone will help resolve or attempt to resolve from here.
hi
thanks for your reply attached screenshot of recovery, i do no know how to access phone from my PC connecting to USB
phone are not see on my laptop
help appreciated
frenchy94 said:
... attached screenshot of recovery, i do no know how to access phone from my PC connecting to USB ...
Click to expand...
Click to collapse
The phone has stock recovery. Let us check a few things but let us not clutter here. I assume you know how to go about with private messages.
If you do not know how to, see the attached image - XDA accessed from my PC. You can read private messages and reply from there as well. First off we should sync our time. See your inbox.