I am having problem with my galaxy s4 when unlocking it from the lockscreen.. I just recently purchased it this week.
When I lock the screen and try to unlock it, most of the time it takes a while for it to let me unlock the screen.
I have search through google of anyone else has this issue but there seems to be none.
does anyone have an explanation about this issue? or is it normal?
This is definitely not a normal behavior. First, did you install any apps that may slow it down? If not, then try updating the rom (software update in the settings screen), and if it still doesn't help you may want to use the warranty to get another device.
Sent from my GT-I9505 using xda app-developers app
Anybody notice that in smart lock, there is no smart face and on body detection. Even in the lockscreen settings there is no face lock option. Iam running lollipop 5.01 stock rom gt-i9500. Am i the only one experiencing this issue or what can be done about it
Sent from my GT-I9500 using XDA Free mobile app
Loving my Zuk, or was. I set up the screen lock for fingerprint sensor and it was working great. Recognises my thumb first time every time. Now though I can unlock with just a normal swipe. It doesn't even demand the backup pin number. I went back into settings and it still had the fingerprint setup as the screen lock so I removed it and set it up again and hey presto i was back in action but only for about 10 minutes and it went back to no security at all.
There were 4 small OTA updates today so I am guessing one of these has messed it up. Each update didn't say what it was for
Has anybody else had this issue?
Is working well for me.
Have you added other smartlock event (wifi, location, ecc) that can interfere with the lockscreen and disable it?
bartito said:
Is working well for me.
Have you added other smartlock event (wifi, location, ecc) that can interfere with the lockscreen and disable it?
Click to expand...
Click to collapse
My MOTO 360 is in smartlock as a trusted device, don't fully understand what smartlock is to be honest. If I remove it would it affect anything?
gibmonkeys said:
My MOTO 360 is in smartlock as a trusted device, don't fully understand what smartlock is to be honest. If I remove it would it affect anything?
Click to expand...
Click to collapse
Of course!
I have also a smartwatch (LG Urbane) and the watch as a trusted device. When the smartwatch is connected to the phone the lockscreen is always DEACTIVE, even if you have configured a lock screen (PIN, pattern and or fingerprint)
Power off your watch (or set if in airplane mode) to check if lockscreen turns on in the phone
bartito said:
Of course!
I have also a smartwatch (LG Urbane) and the watch as a trusted device. When the smartwatch is connected to the phone the lockscreen is always DEACTIVE, even if you have configured a lock screen (PIN, pattern and or fingerprint)
Click to expand...
Click to collapse
I have just removed my 360 as a trusted device and the screen lock now works perfectly and so I now understand how this works. Many thanks for the advice. I can now stop worrying that I have a faulty device!
gibmonkeys said:
I have just removed my 360 as a trusted device and the screen lock now works perfectly and so I now understand how this works. Many thanks for the advice. I can now stop worrying that I have a faulty device!
Click to expand...
Click to collapse
I am facing as well to a lockscreen and fingerprint issue.
I used fingerprint to open lockscreen and pattern as secondary. After showing the ZUK to somebody I needed to modify the pattern. From that time I am unable to switch back to fingerprint. Only three opportunities what I have, and no swipe or fingerprint, due to "Disabled by administrator, encryption policy or credential storage". What accessibility service messes up the fingerprint usage? Do you guys have an idea? All of them are swiched off.
---------- Post added at 01:17 PM ---------- Previous post was at 12:22 PM ----------
My problem is solved. I needed to delete credentials in security settings.
Hi. I'm having some problems with the fingerprint sensor. Is working intermitent or not. I've asked zuk support already but no answer yet. I don't know if it's a software issue or hardware. It's any way to calibrate the sensor? Maybe it's decalibrated? Any help will be usefull. Thank you.
LE I already made a factory reset. No improvement.
Cmdragan said:
Hi. I'm having some problems with the fingerprint sensor. Is working intermitent or not. I've asked zuk support already but no answer yet. I don't know if it's a software issue or hardware. It's any way to calibrate the sensor? Maybe it's decalibrated? Any help will be usefull. Thank you.
LE I already made a factory reset. No improvement.
Click to expand...
Click to collapse
I'm using the Zuk since a month, and no problems with the fingerprint at all.
In any occasions, the fingerprint sensor don't detects the finger the first time but at second try.
Since a few days, I'm on CyanogenMod (instead of Cyanogen OS) and I think the sensor is less responsive (sometimes I need to try three times or use the lock pattern).
But if you are with issues using CyanogenOS I think is due to a hardware issue.
bartito said:
I'm using the Zuk since a month, and no problems with the fingerprint at all.
In any occasions, the fingerprint sensor don't detects the finger the first time but at second try.
Since a few days, I'm on CyanogenMod (instead of Cyanogen OS) and I think the sensor is less responsive (sometimes I need to try three times or use the lock pattern).
But if you are with issues using CyanogenOS I think is due to a hardware issue.
Click to expand...
Click to collapse
I can not use the fingerprints touch button as back button anymore. this happened after last update cynogenmod. any knowledge.
thanks.
sadrettin said:
I can not use the fingerprints touch button as back button anymore. this happened after last update cynogenmod. any knowledge.
thanks.
Click to expand...
Click to collapse
Fingerprint actions has been removed by CM a few OTA updates ago.
I hope a kernel developer will add soon, but ZUK has not too much developers
Modded kernel for COS can be found in the other topic about this issue.
The OnePlus 2 sources happen to have a compatible finger print driver with capacitive button support which is currently being checked out for porting to the Chroma kernel.
So don't fret.. The feature can be restored.
iam not able to use my fingerprint lock, it was working well before but now suddenly it is not showing the option in CHOSE LOCK SCREEN- the SWIPE an d FINGER PRINT OPTION IS DISABLED.
how to enable it
Thanks ... I had the same issue & delete credentials in security settings.
I bought zuk z1 3days ago
Why We cannot use fingerprint sensor to lock and unlock the device for both purposes
Having an issue with the fingerprint sensor.....
Works fine but when push notifications(any notifications**) show up on the lock screen ..the sensor gets non responsive...mind u almost impossible to unlock
Have no choice other than security pin
And I Definitely think this is result of All IN ONE Issue
Say like.....1)fingerprint sensor integrated into hone Button, 2)Faulty software patching, 3) Me, adding two or more fingerprints
Any Suggestions from u guys Feels helpful
BTW....Bought the product via Amazon.in
Is there a provision in the ZUK Z1 which let's you interact with the device by simply tapping on the fingerprint sensor except on the lock screen?
If the device is locked and the screen is off too, simply placing my hand on the fingerprint sensor doesn't work. I always have to press on the button to wake the screen first.
Any help?
May sb tell me the modell of the finger print reader of the ZUK Z1? Pls. use AIDA64.
Gesendet von meinem Aquaris X5 Plus mit Tapatalk
@infistuff said:
Is there a provision in the ZUK Z1 which let's you interact with the device by simply tapping on the fingerprint sensor except on the lock screen?
If the device is locked and the screen is off too, simply placing my hand on the fingerprint sensor doesn't work. I always have to press on the button to wake the screen first.
Any help?
Click to expand...
Click to collapse
That's part the of custom roms. Fingerprint as home button can be activated by flashing something, you need root. But in the play store you can try https://play.google.com/store/apps/details?id=com.ztc1997.fingerprint2sleep
But it's not that what you need. Without root and a kernel where its implemented its not possible.
Hey my fingerprint was working fine till one day it just started vibrating when I tried to scan it. I tried deleting the saved fingerprints and registered new. I'm not even Able to register new fingerprints. What do I do?
Hi guys I have an international note 4 which I have tried now several ROMs currently on lineageos 7.1.2 but whichever ROM I use the screen is off during calls I cannot send tones or anything I have to pull the battery to end the call.
The proximity sensor is not showing any values in the sensor apps I have tried. No proximity fix app seems to do anything either.
Any ideas?
You might have to replace the sensor, not all electronics live forever, even if they don't physically move or show physical damage. The sensor is cheap, once your phone is open its quick to replace.
Sent from my [device_name] using XDA-Developers Legacy app
It works ok on factory ROM so don't think it's the actual sensor more seems to be a ROM issue maybe bootloader need to try a new one of those maybe!!
monza20vt said:
It works ok on factory ROM so don't think it's the actual sensor more seems to be a ROM issue maybe bootloader need to try a new one of those maybe!!
Click to expand...
Click to collapse
Probably not bootloader related. I'd say try different kernels, it might be an issue with the LineageOS kernel.
Hi
I received the Oreo roll-out for my S7 Edge (UK user; unlocked) but have realized that the pro mode in the stock camera app no longer works. When I switch to the pro mode, the phone seems to 'slow' down processing and the app crashes with a 'camera has stopped' message.
All other modes, auto/panorama/selfie/slow-motion etc are all working fine.
Is anyone else having this issue? I have already fed back to Samsung and sent an error report. I've already tried most of the usual troubleshooting issues (restarting, re-restarting, wiping the cache).
Is it just a case of waiting for Samsung of fixing the bug? Any idea how long that might be? Was going to go on holiday in a few weeks so might just roll back to Nougat just so the pro-mode works!
Hi, I had the same issue today, I've solved it by clearing camera data not and only cache.
sidi0us said:
Hi, I had the same issue today, I've solved it by clearing camera data not and only cache.
Click to expand...
Click to collapse
HAH. genius! it worked! =D
thank you!
wijdany said:
HAH. genius! it worked! =D
thank you!
Click to expand...
Click to collapse
I just updated my galaxy s7 to oreo having same issue. Actually I don't know how to clear camera data. Any advice, please?
keebak said:
I just updated my galaxy s7 to oreo having same issue. Actually I don't know how to clear camera data. Any advice, please?
Click to expand...
Click to collapse
go to settings > apps > camera > storage > clear data
Easy check out my video and fix it in few seconds https://youtu.be/XJNXWQq7MV0
keebak said:
I just updated my galaxy s7 to oreo having same issue. Actually I don't know how to clear camera data. Any advice, please?
Click to expand...
Click to collapse
Swipe left on the camera screen and the options will show up. I was searching all over for this too. The instructions say something about right swipe for different effects but nothing about left, thought'll give it a shot..
Worked like a charm!
sidi0us said:
Hi, I had the same issue today, I've solved it by clearing camera data not and only cache.
Click to expand...
Click to collapse
Frustrating as hell, but this fixed it. Many thanks!!?
Hello.
I just updated tha s7 edge into oreo after update camera not woking.issue Warning camera failded. i have T-mobile SM-G935t. Please help.