Hi all,
I just got my phone and rooted it with iorooted.
All went well and was back into the device.
Then I installed a lcd density changer and changed it to 320 and rebooted now phone is stuck on lg screen and not progressing like stuck.
I was able to power it off with button up and power down for 20 second. I also went into recovery mode to try a factory erase reset but it still is stuck on lg screen and not progressing after rebooting.
Furthermore, I was able to go into download mode and it says root at bottom performing firmware upgrade but the bar is not progressing so I turned it off after 5minutes
Any ideas?
Really upset on first night using device.
TIA
xlr8me said:
Hi all,
I just got my phone and rooted it with iorooted.
All went well and was back into the device.
Then I installed a lcd density changer and changed it to 320 and rebooted now phone is stuck on lg screen and not progressing like stuck.
I was able to power it off with button up and power down for 20 second. I also went into recovery mode to try a factory erase reset but it still is stuck on lg screen and not progressing after rebooting.
Furthermore, I was able to go into download mode and it says root at bottom performing firmware upgrade but the bar is not progressing so I turned it off after 5minutes
Any ideas?
Really upset on first night using device.
TIA
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45293512
Just follow this post, go back to stock and start all over again. If you still have recovery you can use adb to push rom zip to internal storage and flash it. Btw I'm not sure but I think that changing density lower than 380 on g2 will cause issues.
Sent from my LG-D802 using Tapatalk
Thanks for the quick reply.
Since I was using a 4.2.2 version can I grab the uk kdz and flash that onto it?
and then follow the steps as per that link?
Also is it possible to use a tool to enter the phone and modify the lcd density in build.prop back to default?
Related
Alright, so I've got an LG E617G from Bell Aliant, a mobile carrier in Canada. I know it's rooted and it's the most up-to-date OS I could possibly get for this phone, stock, but I can't check the OS at the moment, or at least in a way I know of. I went to reset the phone to factory default settings and it gets stuck in this boot loop. I shut down, boot it back up. Now the boot screen sound doesn't finish properly and it just is stuck in a loop.
I tried to do a hard reset/forced recovery mode thing (Volume Down + Power then go to holding Home only when the LED on the bottom of the screen light up) and that didn't work. Same broken sound and stuck loop. Thinking that the charge might have something to do with it (It was at about 7% when I tried to do the initial reset. Stupid, I know, but I was drunk).
I just tried to do the same hard reset/forced recovery mode thing and that didn't work, same boot screen problem. I searched on the forums here as well as online and the only information that I've gotten is that the L5 is the closest well known representation of the LG E617g so I'm hoping you guys can help.
It should also be known, I did give ES File Explorer root access the day prior to the reset in an attempt to change the actual font. That didn't work so I tried 2 different applications that I found information on. iFont and Font Installer. I tried something with Font Installer and it didn't work so I installed iFont (without uninstalling Font Installer) and installed a font there. That didn't seem to work so I just ignored it. Then I noticed that the font had changed but only on Facebook apps. This was why I wanted to do the reset, to get rid of this font nonsense. Now I think I may have just ****ed it all up.
Any help would be greatly appreciated. Ask what you need of me, if you do need anything, and tell me a quick way of possibly finding that information or linking to a tutorial how and I will get back to you ASAP. Thank you for the patience and help guys.
********
I have since solved the problem. I downloaded and installed all drivers again, ran the LG Mobile Support Tool and on the top menu bar I went Customer Support > Recovery and put my IMEI in and hit check. Got my info and another pop up came up. Downloaded the data for my phone (I had to run it in Download mode. I took out battery, held up and down volume while plugging it in the PC, run this recovery mode. I'd fail the recovery mode but then I'd just run the program part again on the computer while keeping it in plugged in.) and installed it. Worked fine after that.
Thanks a lot for this detailed solution!
need4steer said:
Thanks a lot for this detailed solution!
Click to expand...
Click to collapse
Ah, no problem. I spend most of my time looking at forums that talk about my exact problem but never a solution. Just wanted to make sure that if anyone ends up with my problem that my fix worked.
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
LG G2 Stuck @ 49%
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00
try with x86
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
i had exact same issue that progress stucked on 49%. if you are using 64bit OS, try to flash it with 32bit(x86) OS
good luck
tinydynamite00 said:
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00
Click to expand...
Click to collapse
still no luck
El Killer said:
still no luck
Click to expand...
Click to collapse
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00
tinydynamite00 said:
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00
Click to expand...
Click to collapse
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots
El Killer said:
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots
Click to expand...
Click to collapse
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!
Please READ CAREFULLY
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
Esteef said:
Okay, after 12+ hours of trying every method possible on XDA I finally resolved my issue. I will update the first post just incase any others care or fall into the same dilemma I was in.
The LG Mobile Support tool would not download the firmware and it would NOT ask me for my IMEI to download it either.
So my solution....
***
Installed LG Mobile Support Tool then Installed the LG Drivers. (FROM HERE http://forum.xda-developers.com/showthread.php?t=2471370
BEFORE I connected the phone to the computer. I opened the LG Mobile support tool clicked (Options on the top right).
When the dropped down opened, I clicked the (Upgrade Recovery) option. THEN, is when the prompt opened to ask me what my IMEI is.
Before I entered my IMEI, I connected my phone to the computer in download mode, then proceeded to enter my IMEI and hit OK.
This is when the LG Mobile Support tool SUCCESSFULLY downloaded the latest official LG firmware and installed it.
*** BE AWARE, with the phone connected to the PC, the prompt NEVER appeared to enter my IMEI.
*** But with the phone disconnected, the prompt came up every time. This might be the trick for some people.
*** with the IMEI prompt opened, I then connected the phone , entered the IMEI, then hit OK. BOOM HERPES....
Well I'll polish this up more later. I hope this works for every LG G2 Variant and not just the T-Mobile one (D801)
-Esteef
Click to expand...
Click to collapse
THIS WILL WIPE YOUR PHONE COMPLETELY...
tinydynamite00 said:
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!
Click to expand...
Click to collapse
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens
El Killer said:
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens
Click to expand...
Click to collapse
Sounds good. A full charge can make all the difference. I learnt the hard way! One or more of us will be along should you need further help.
I do hope you get this sorted! I've come back from the brink too many times to not believe you won't.
tinydynamite00
Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app
Falaco147 said:
Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im trying but i get a battery to low error. i guess i need to charge it longer
i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support
El Killer said:
i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support
Click to expand...
Click to collapse
You are welcome... The first time I did it too my battery was at 28% and I panicked since I got the low battery error.
I could of sworn that my phone officially became a paper weight. My heart dropped.
I'm glad you are up and running with the rest of us!
-Esteef
1732359994
hey !
I have the same problem, but... I can't acces to the recovery :/ i tried to install CWM (with Freegee) over Team win recovery and... boot loop :
The rom 4.2.2 flex was gone, no boot animation
-When i pres volum down + power, i have the reset menu, but after that, there is a black screen and it's written at the top left "started usb_start Fastboot Mode ()"
Please, i need your help, i'm so afraid !!
Thx !
Esteef said:
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
THIS WILL WIPE YOUR PHONE COMPLETELY...
Click to expand...
Click to collapse
I know this thread is a bit old, but it saved my butt. Your method worked perfectly. Thank you for this post.
My LG F460 was bricked (error 570), only download mode was working. Esteef method works fine even my pictures and programs was saved. Thanks!
Hey all,
I recently was playing with some ROMs with my LG G2, seeing which was the best for me, and along the way, I messed up and now I am stuck in a fastboot screen, with nothing but a little bit of white text on a black background that says "Fastboot mode started, udc_start()". I have no clue what to do, and I really need some guidance. I played around for a bit and now I believe the phone is completely wiped. Can anyone help?
bump, can anyone help? Im dying here.
Hold down power for 15 seconds. Then hold power and volume down till white screen appears. Press power 3 times. Should be in recovery now if you had recovery installed.
Sent from my LG-D802 using Tapatalk
If this does not work you can revert to stock by downloading orginal firmware in .kdz format and flash it with Flashtool
Siinestar said:
Hey all,
I recently was playing with some ROMs with my LG G2, seeing which was the best for me, and along the way, I messed up and now I am stuck in a fastboot screen, with nothing but a little bit of white text on a black background that says "Fastboot mode started, udc_start()". I have no clue what to do, and I really need some guidance. I played around for a bit and now I believe the phone is completely wiped. Can anyone help?
Click to expand...
Click to collapse
help.. i tap something that i forgot in ... may be in "##4433386368# - Developer menu*" or somewhere(Sprint Dialer Codes) now i can't connect to my computer... i'm not allowed to post ... so ....anyone can help me ?
You need to first download the kdz and lg flash utility with drivers.
Install drivers
The factory reset deleting system, cache, internal sd.
Then shutdown your g2.
Start to downloaded mode connecting your g2
Flash kdz & voila... Done
I too bricked my phone before. My flashing stuck at 49%. Recovered using above method, all is well now
This works 1000%. I bet on it. Just remember to wipe the phone completely before flashing. You will return to stock with unrooted status in download mode. U will have your warranty back too
Sent from my LG-D802 using XDA Premium 4 mobile app
Sent from my LG-D802 using XDA Premium 4 mobile app
Hello,
this could be a silly question, but I'm actually hopeless about it...
I've been using CloudyG3 for 3 days, but I had some problems about it, so I decided I'd revert back to stock. I entered the Download Mode, installed the V20D ROM using LG's Support Tool, and, when the phone restarted, tried to enter the Factory Reset screen. Try as I might, I couldn't do that, so I'm stuck in a bootloop (I mean, the LED indicator is flashing, but no LG boot animation - just the static logo. I think there could've been some problem while flashing the FW, that's why I would like to enter Download mode again, or maybe at least turn my phone off (it can only restart). Nevertheless, while trying to flash the FW again while in a bootloop, everything from model no. to firmware version installed is shown correctly, but it can't boot into Download mode.
Thanks in advance!
a5943 said:
Hello,
this could be a silly question, but I'm actually hopeless about it...
I've been using CloudyG3 for 3 days, but I had some problems about it, so I decided I'd revert back to stock. I entered the Download Mode, installed the V20D ROM using LG's Support Tool, and, when the phone restarted, tried to enter the Factory Reset screen. Try as I might, I couldn't do that, so I'm stuck in a bootloop (I mean, the LED indicator is flashing, but no LG boot animation - just the static logo. I think there could've been some problem while flashing the FW, that's why I would like to enter Download mode again, or maybe at least turn my phone off (it can only restart). Nevertheless, while trying to flash the FW again while in a bootloop, everything from model no. to firmware version installed is shown correctly, but it can't boot into Download mode.
Thanks in advance!
Click to expand...
Click to collapse
Have you got a power source connected ?
timlad said:
Have you got a power source connected ?
Click to expand...
Click to collapse
Thanks for your reply!
No, I don't.
EDIT
I'm really grateful to you for your suggestion. Having plugged the device in, the Download mode came up with no problems. Now I'm trying to flash the previous version - V20B, which might make my device usable again.
Thank you very much!
Hi,
Have a weird situation, but try as much as I may, I'm unable to resolve it.
My phone is rooted (international D802) and was running fine. Had a screen issue and got it replaced at the service center but their system identified my phone as a rooted device, and a couple of days later the problems started.
The issues I'm facing right now:
1. The phone doesn't charge when switched on, at all.
2. The phone doesn't reboot either.. not instantly anyways. If powered off, or rebooted, the phone doesn't turn back on, it just goes dead. It does boot again though if tried after a couple of hrs.
3. The phone charges when its off (shows no light or indicator though, like its bricked)
4. Cannot go into either recovery or download mode. Coz the phone doesn't boot when restarted or when i try to reboot into recovery.
5. When it does magically start after a few hrs (upon long pressing the power button), even if I try to go into download or recovery via the vol keys, it just boots to android.
6. The phone is recognized properly as LG G2 under windows and all the drivers install too.
7. The phone isn't recognized under Linux... tried both Ubuntu and Knoppix.
Travelling out of the country in a few days, really need to sort this out.
Any and all help/suggestions will be greatly appreciated.
Thanks in advance
Somebody... Anybody? :'(
When your phone rebooted I would recommend you firstly to activate USB Debugging in the developer settings. You said your device is rooted? So try to install the Auto Rec recovery here
https://www.androidfilehost.com/?w=files&flid=13763 - but make sure you are on Kitkat. Now, install the app normal and let the app install all things. After installation, the app asks you to reboot to recovery, now press reboot to recovery.
Maybe you have luck and the phone reboots to TWRP. In TWRP you can go to Reboot and then Reboot to Download mode.
Now (if all worked) you can flash the stock rom .kdz file of the d802 via the FlashTool 2014.
Hope you have luck, please keep me up to date if everything worked.
Yours, Flo
Good luck!!
Thanks a lot for the response Flo, but the problem is that i never got around to updating to a Kitkat rom... the rom i was never got updated and I was kinda happy with how things were working so didn't jump on to any other rom.
Anything I can do in my current situation?
Go back to stock via lg flash tool
_____________________________________Read more write less and be smart
siggey said:
Go back to stock via lg flash tool
Click to expand...
Click to collapse
As mentioned in my first post, can't get into download mode.
Try this
http://forum.xda-developers.com/showthread.php?p=56000637
LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK]
_____________________________________Read more write less and be smart