Database Users

LG E617G - Boot Screen is stuck in a loop

Alright, so I've got an LG E617G from Bell Aliant, a mobile carrier in Canada. I know it's rooted and it's the most up-to-date OS I could possibly get for this phone, stock, but I can't check the OS at the moment, or at least in a way I know of. I went to reset the phone to factory default settings and it gets stuck in this boot loop. I shut down, boot it back up. Now the boot screen sound doesn't finish properly and it just is stuck in a loop.
I tried to do a hard reset/forced recovery mode thing (Volume Down + Power then go to holding Home only when the LED on the bottom of the screen light up) and that didn't work. Same broken sound and stuck loop. Thinking that the charge might have something to do with it (It was at about 7% when I tried to do the initial reset. Stupid, I know, but I was drunk).
I just tried to do the same hard reset/forced recovery mode thing and that didn't work, same boot screen problem. I searched on the forums here as well as online and the only information that I've gotten is that the L5 is the closest well known representation of the LG E617g so I'm hoping you guys can help.
It should also be known, I did give ES File Explorer root access the day prior to the reset in an attempt to change the actual font. That didn't work so I tried 2 different applications that I found information on. iFont and Font Installer. I tried something with Font Installer and it didn't work so I installed iFont (without uninstalling Font Installer) and installed a font there. That didn't seem to work so I just ignored it. Then I noticed that the font had changed but only on Facebook apps. This was why I wanted to do the reset, to get rid of this font nonsense. Now I think I may have just ****ed it all up.
Any help would be greatly appreciated. Ask what you need of me, if you do need anything, and tell me a quick way of possibly finding that information or linking to a tutorial how and I will get back to you ASAP. Thank you for the patience and help guys.
********
I have since solved the problem. I downloaded and installed all drivers again, ran the LG Mobile Support Tool and on the top menu bar I went Customer Support > Recovery and put my IMEI in and hit check. Got my info and another pop up came up. Downloaded the data for my phone (I had to run it in Download mode. I took out battery, held up and down volume while plugging it in the PC, run this recovery mode. I'd fail the recovery mode but then I'd just run the program part again on the computer while keeping it in plugged in.) and installed it. Worked fine after that.

Thanks a lot for this detailed solution!

need4steer said:
Thanks a lot for this detailed solution!
Click to expand...
Click to collapse
Ah, no problem. I spend most of my time looking at forums that talk about my exact problem but never a solution. Just wanted to make sure that if anyone ends up with my problem that my fix worked.

[Q] AT&T LG G2 won't boot

I've been messing around with my phone, trying to flash CWM and CyanogenMod (to no avail), and yesterday something happened. I woke up, my phone was dead so I started charging it. It booted into the Stock OS (the one that ships with the G2--build D20010o I think). Shortly after, a message appeared on the screen about an update the phone was going to install (I'm assuming one that AT&T was pushing to my phone), and shortly after it powered down on its own. I have not been able to get it to boot into the OS since.
Before all of this happened, I rooted the phone with IORoot, tried to flash CWM (I think successfully), but was not able to install CyanogenMod, so I flashed an earlier build of the stock OS (D20010o), rooted it again (I'm not sure that I had to--I think it stated that my phone was already rooted), tried to flash CWM again (unsuccessfully this time), and I gave up. Then this problem occurred.
Every time I try to power on the phone, the LG logo flashes, and the screen stays on, but it's black. If I try to do a factory reset via the hardware buttons, I am able to see that screen, but as soon as I follow the instructions of pressing the power button twice, it says that it's initializing the reset, but then the phone's screen goes black again--not sure if the screen is on or off, though. The LED light is also not on during any of this.
I'm unsure what to do. I've had the phone for about 6 months, but I had not owned an Android before that--iPhone user for 3 years. I obviously did not do enough research or ask enough questions, but I would like my phone to be in a usable state. I would greatly appreciate any help that anyone can give me!

NEVER take an OTA with a recovery.
Use the lg flash tool to go back to stock
http://forum.xda-developers.com/showthread.php?t=2432476

Sorry, should have also mentioned that I can't boot into Download Mode. I'm assuming there's no .kdz file for AT&T, and the other method in that link requires Download Mode. :/

[Q] Hard bricked G2 after flash

Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.

Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!

darkflyer1983 said:
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
Click to expand...
Click to collapse
At least I'm not alone :laugh:
I found this thread but haven't tried yet. Don't know if the problem is similar.
I really hope the phone isn't dead, it's almost brand new

This is exactly what I have . The main problem is we can not see phone partitions. Always the alarm "can not access " or "format" !Waiting for some body to help restaure our LG G2.

3205
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.

Problem solved ...
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.

You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....

Is it actually in "Download Mode"?
GeneralMills777 said:
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Click to expand...
Click to collapse
So, if my G2 shows "Download Mode" on the screen with the little white dots, but it's not recognized by Windows 7, Ubuntu, or Knoppix, and is for all intents and purposes, non-responsive, does anyone know if it's actually in "Download Mode"?

Eijo said:
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
Click to expand...
Click to collapse
Peperepe said:
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Click to expand...
Click to collapse
In my case, it just stuck on the same screen. Nothing moves.

honest1212 said:
In my case, it just stuck on the same screen. Nothing moves.
Click to expand...
Click to collapse
same problem here:
+ Download mode with some blue dot and nothing move, PC has no usb connection detected
+ Stuck on the LG logo screen with normal boot
+ NO recovery
+ it does FACTORY RESET but keep processing and nothing happen

Helped me, too.

Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
hi dude , i had the same issue , and i lost my g2 cause of it , please dont mess with the partitions , to all of you please dont delete the partitions , just turn off your phone , press volume up and push usb cable you ll get into download mode , from there yo can go back to stock by the .tot flashing method or kdz but dont mess with partitions , i deleted partitions and my phone wad totally dead , no one could repair it

Something happened to me today...
Sent from my LG-D802 using XDA Free mobile app

[Q] Stuck on Bootscreen after flashing CWM (D802, 6.0.4.7)!

Hi there!
So I rooted my LG G2 (D802, 4.4.2, Stock, used ioroot) yesterday.
I intend(ed) to flash the Optimus G3 Rom, in the start post they recommended to flash cmw/twrp via "Simple Tool 3.2" (http://forum.xda-developers.com/showthread.php?t=2633941). After doing so (I used the automated version, not the manual one) I got STUCK ON THE BOOTSCREEN. There is a notification popping up for a few seconds in the left upper corner which lists several errors occurring:
BOOT CERTIFICATION VERIFY
SECURE BOOTING ERROR;
CAUSE: BOOTCERTIFICATION VERIFY
along with the following numbers listed from top to bottom: 710, 760, 810, 860, 910, 960 (I just noticed, the numbers can vary, but always follow the same pattern...)
after this message, the screen fades to black, I think it it is still running though, since it takes more than 10 seconds to reboot the phone by pressing the power button. I still have access to the button down/power button combo which leads to a factory reset setting, but it doesnt do anything for me since I still get stuck at the lg boot screen.
I
Atm I dont what to do! Enter download mode and flash something? I'm seriously kind lost here. So, thank you for your help!
Cheers

You flashed a custom recovery version thad doesin't match you phone ( example you flashed D801 recovery on D802 phone )
Just search in Q/A and you find the solution to fix it. Be calm , if you phone is booting - you can fix it
If you are lazy , i searched it for you. http://forum.xda-developers.com/showthread.php?t=2694530

harkis123 said:
You flashed a custom recovery version thad doesin't match you phone ( example you flashed D801 recovery on D802 phone )
Just search in Q/A and you find the solution to fix it. Be calm , if you phone is booting - you can fix it
If you are lazy , i searched it for you. http://forum.xda-developers.com/showthread.php?t=2694530
Click to expand...
Click to collapse
Thanks a ton!! Finally I can put a name on the problem (bricking...)- Ironically I never mangaged to get there in 3years of samsung flashing but got there within 15mins of flashing on the LG G2. I guess it's true what they say about samsung devices, as hard to brick as a brick...
I'll report back if it worked...

Weeell, as it turns out my phone isn't recognized by my pc (Win 7) anymore...I literally can't do anything. Any hints?
I can use the Tool, but it's always trying to connect to my phone without success. But when I connect my phone to the computer it opens a dropbox window (import photos) and several windows partitions, which it tells me to format...

thechillerdewd said:
Weeell, as it turns out my phone isn't recognized by my pc (Win 7) anymore...I literally can't do anything. Any hints?
I can use the Tool, but it's always trying to connect to my phone without success. But when I connect my phone to the computer it opens a dropbox window (import photos) and several windows partitions, which it tells me to format...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2687768

LG G2 D802 brick problem (I tried different solutions)

Hello everyone!
I really hope I can find help here. I wanted to install Cyanogenmod 13 on my LG G2 D802 32GB. In the end I think I bricked my phone. I want to mention that I already searched for help on the Internet and tried many tutorials, but nothing helped.
First, I rooted my phone using this One click root method (before, I tried doing that other ways but it didn't work). So far, so good.
Then, I installed TWRP via Autorec. And here came the first problem. I booted into recovery mode and then the phone wouldn't start anymore. I started getting "Security error" along with Lg logo, when I wanted to turn on the phone. Actually I can't remember if I wiped everything in Recovery mode before or after getting this error, but I did anyway. Then I didn't get this security error message anymore, just stuck with lg logo.
Anyway I was still able to get into recovery or download mod, so I tried installing CM. But I couldn't acces my phone memory through PC and I didn't have CM installer zip on the phone. I tried copying CM installer into the phone using ADB push command. It did copy, it said it succesfully installed but since then every time I turn on my phone Lg logo just blinks for a fraction of a second and the phone will not turn on. The screen is black, but it remains "on" (there's nothing on it but you can see it's not totally turned off).
After that I tried every tutorial I could to install CM or stock ROM. I tried downloading different LG firmwares, including one found on a page where I had to enter my IMEI. But it's always the same problem: when I use LG Flashtool ( 1.0.54 ) it gets stuck. After clicking on System Upgrade I'm not asked about the language (as tutorials suggest), but it just opens LGMobile Support Tool, which says that my system is up to date.
OK, I think that's all I can say. So, the main problem is that I cannot use LG Flashtool, which is neccessary to install stock ROM in all the tutorials I have seen. Of course, I would like to install CM 13 still, but now th emost important thing is to get my phone to work again, even on stock system.
I hope we can solve this problem. Thank you all in advance!

Can you boot in download mode?
If you have download mode you can easily reflash stock
http://forum.xda-developers.com/showthread.php?t=2432476
If you cant get to download mode you have to reflash all the partitions here is thread
http://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
or
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
After reflashing all partition you should be able to boot in download mode, then you can flash stock

xarekusu said:
Can you boot in download mode?
If you have download mode you can easily reflash stock
http://forum.xda-developers.com/showthread.php?t=2432476
If you cant get to download mode you have to reflash all the partitions here is thread
http://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
or
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
After reflashing all partition you should be able to boot in download mode, then you can flash stock
Click to expand...
Click to collapse
Thanks a lot. I followed the instructions in the first post on the first site that you linked, using kdz file. Everything seemed to go well and I was already happy, but... It seemed that the stock flashed (on the computer it said that the installation was correct, on the phone the screen showed Update Software and it went to 100% percent), then the phone restarted and started updating apps for Android. And that is normal I suppose. But then, after it finished, it turned off, turned on and started installing those apps again. After that it turned off. When I wanted to turn it on, it showed me LG logo and then android logo for a fraction of a second. Then sometimes it would turn off completely and sometimes turn on again and show logos again. I assume that's what is called bootloop. So I followed the tutorial which said I should do factory hard reset. I entered the screen (power+vol down buttons), confirmed two times that I want to do the reset. It said the reset will start automatically, but nothing happened. The phone just turned off immediately and the same situation with logos (Bootlooping?) appears. So the problem now is that I cannot factory reset the phone.

pagi111 said:
Thanks a lot. I followed the instructions in the first post on the first site that you linked, using kdz file. Everything seemed to go well and I was already happy, but... It seemed that the stock flashed (on the computer it said that the installation was correct, on the phone the screen showed Update Software and it went to 100% percent), then the phone restarted and started updating apps for Android. And that is normal I suppose. But then, after it finished, it turned off, turned on and started installing those apps again. After that it turned off. When I wanted to turn it on, it showed me LG logo and then android logo for a fraction of a second. Then sometimes it would turn off completely and sometimes turn on again and show logos again. I assume that's what is called bootloop. So I followed the tutorial which said I should do factory hard reset. I entered the screen (power+vol down buttons), confirmed two times that I want to do the reset. It said the reset will start automatically, but nothing happened. The phone just turned off immediately and the same situation with logos (Bootlooping?) appears. So the problem now is that I cannot factory reset the phone.
Click to expand...
Click to collapse
I'm having a similar problem on my vs980 except I can't access recovery anymore but everything else is the same.
Edit: I actually can access recovery

You messed up pretty bad before you fixed a problem, you created another.
Have you tried to go back to stock using downoad mode and kdz?
Use this tool : http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076

iubjaved said:
You messed up pretty bad before you fixed a problem, you created another.
Have you tried to go back to stock using downoad mode and kdz?
Use this tool : http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Click to expand...
Click to collapse
OK, well, this is strange. The phone is working again, but actually I have no idea why I downloaded the tool from your link, installed it and ran. Then, following the yt tutorial, I went to the step where I was supposed to "look and remember the disk number that have so many partitions". I didn't anything there, though. And then, all of the sudden the phone started updating Android apps and then turned on as after factory reset. Weird, but it's working fine
By the way, can someone post a link to a tutorial on how to install Cyanogenmod 13 on LG G2 D802 32GB? I would still like to install it, but I want to avoid all the problems that I had now. So is there any good step by step tutorial that I could use to install CM?
Anyway, thanks all for help

pagi111 said:
OK, well, this is strange. The phone is working again, but actually I have no idea why I downloaded the tool from your link, installed it and ran. Then, following the yt tutorial, I went to the step where I was supposed to "look and remember the disk number that have so many partitions". I didn't anything there, though. And then, all of the sudden the phone started updating Android apps and then turned on as after factory reset. Weird, but it's working fine
By the way, can someone post a link to a tutorial on how to install Cyanogenmod 13 on LG G2 D802 32GB? I would still like to install it, but I want to avoid all the problems that I had now. So is there any good step by step tutorial that I could use to install CM?
Anyway, thanks all for help
Click to expand...
Click to collapse
Sure.
Download the rom from cyanogenmod website and put it on your phone memory.
Download Gapps from opengapps.org and place on the phone memory.
Go to recovery.
Make a full nandroid backup( all the partitions) , wipe all except internal storage.
Flash the rom along with the gaaps zip.
Reboot.